HSS Jamming Systems RF, Cellular, & Bomb …RF, Cellular, & Bomb Jammer Technical Specifications At HSS, our Jamming Systems are designed with precision and may include the following

© 2011-2016 Homeland Security Strategies GB Ltd US Rep: 75 South Broadway White Plains, NY 10601 USA +001 914.304.4333 (tel) +001.914.368.9729 (Fax) [email protected] (email) www.secintel.com (web) Disclaimer: All Jamming devices in part or whole may be regulated by the US Department of State in accordance with the guidelines of ITAR (International Traffic in Arms) title 22, Code of Federal Regulations (CFR), Parts 120-130. An export license may be required before proceeding. RF Jamming in some countries is regulated. In the United States, RF Jamming is prohibited by the FCC. Using an RF Jammer without FCC permission is a violation. Some Federal Agencies and US Armed Forces may be exempt.

H S S J a m m i n g S y s t e m s R F , C e l l u l a r , & B o m b J a m m e r

T e c h n i c a l S p e c i f i c a t i o n s

At HSS, our Jamming Systems are designed with precision and may include the following capabilities for efficient performance: Over/under voltage protection, protection against antenna mismatch, overheat protection, shock absorbers that protect against vibrations. PLL stabilization Phase Locked Loop – thanks to this feature the output power is concentrated within the limits of the frequency band, neutralizing power dissipation. In other words, our systems do not have power losses. In that way, our systems work effectively, with continual jamming attributes that outperform competing systems. DDS – Direct Digital Synthesizes – making programming capabilities effective.

Index: Herein you will find Technical Data on the following Jamming Systems: VIP900 MS6 Series VIP300U VIP250PC VIP256PC VIP500 High Power BombJammer™ VIP300R High Power Barrage Jammer VIP300T Covert IED Jammer VIP300TE High Power Barrage Jammer VIP300P Man Pack Programmable Barrage Jammer


Frequency Range Standard 20 MHz – 2,500 MHz

Frequency Range (MHz)

Module output power (WATTS)

Antenna Type

Band 1 20-150 80 Rod/directional

Band 2 150-500 70 directional





Band 7

2000-2500

10

Directional

Specifications: - Options: As per Request Interference Type: Fast Random Sweep - Interference Category: Barrage - Total Power output: ≥ 250W - Operation Time: Unlimited with AC power and Uninterrupted power supply - Power Supply: 110/220 VAC - Power Consumption: 1500 W at 220 volt AC Weight: 35 kg

V I P - 9 0 0 S T A T I O N A R Y R F J A M M E R

f o r B u i l d i n g s , B a r r a c k s , C h e c k p o i n t s


M S 6 S e r i e s C e l l P h o n e J a m m e r

( P r i s o n & G o v e r n m e n t F a c i l i t y J a m m i n g )

Specifications: · Wall mounted · External Antennas mounted on the Jammer Case · Fast random frequency sweeping technology. · Power Supplies 90 – 265 V AC · External AC/DC Adapter

MODULE # FREQUENCY RANGE (MHz) POWER (Watts) 1 800 - 1000MHz 6.0 2 1800-2000MHz 6.0 3 2110-2170MHz 6.0 Total output power: 18.0 Watts


V I P - 3 0 0 U T R A N S P O RTA B L E R F J A M M E R

Specifications: Mounted in Rugged Wheeled Waterproof Case

Field Use - operates in place or during movement

Folded Antennas Incorporated in Jammer Case

External Antennas Available

Low Power Loss due to short Antenna connection

Built-in Dust Filter

Frequency Coverage – preset frequency threat bands. Extensions available.

Fast random frequency sweep technology.

Wired Remote Control

Multiple Power Supplies 10.5 – 15 V DC; 90 – 265 V AC

Built-in AC/DC and DC/DC Converters

High Power 12V LiIon Battery - up to 1 hour Autonomously Working.

Built-in Fast Battery Charger

Battery Charging while Working from External Power Source

Current Consumption 30 A from 12V

Easy Turning from Transportation on Working Condition – 1 min.

Module № Freq. Range, MHz Power, Wats

1 25 – 520 60

2 800 – 1000, switchable 30

3 1800 – 2000, switchable 30

4

Total

120


V I P - 2 5 0 P C C e l l u l a r C O M J A M M E R

3.TECHNICAL DATA 1. Jamming mode – barrage 2. Frequency bands – from 800MHz to 2500MHz as follows:: A. First – Ch1 – GSM 800/900 - from 800MHz to 1000MHz: - Ch1/SB1 – 925MHz - 960MHz; - Ch1/SB2 – 869MHz - 894MHz; - Ch1/ Full - 869MHz - 960MHz. B. Second – Ch2 – DCS/PCS/GSM – from 1800MHz to 2000 MHz: - Ch2/SB1 – 1805MHz - 1880MHz; - Ch2/SB2 – 1930MHz - 1990MHz; - Ch2 /Full - 1700MHz - 1880MHz. C. Third – Ch3 – 3GPP - from 2.11GHz to 2.17Ghz. D. Fourth – Ch4 – 802.11b (WiMAX, WiFi) – from 2.4GHz to 2.5GHz. 3. Frequency bands over lapping – no less 1%. 4. Number of the transmission modules (М) – 3: -M1 (module 1) – for Ch1 (channel 1) ; -M2 (module 2) – for Ch2 (channel 2); -M3 (module 3) – for Ch3 (channel 3) and Ch4 (channel 4). 5. Power output: -М1 ≥ 30W; -M2 ≥ 30W; -M3 ≥ 20W.

VIP250PC is a hand carried jammer covering the following frequency bands: GSM 800/900, DCS/PCS/GSM1800, 3GPP and 802.11b (WiMAX, WiFi) (WIMA).


V I P - 2 5 6 P C C e l l u l a r C O M J A M M E R

TECHNICAL DATA 1. Jamming mode – barrage, fast random sweep, PLL control. 2. Frequency bands as follows: - Ch1 – CDMA800 869 MHz – 894 MHz; - Ch2 – GSM900 925 MHz – 965 MHz; - Ch3 – GSM1800 1805 MHz – 1880 MHz; 3. Power output: Option 1: -Ch1 4 - 40W manually adjustable; -Ch2 4 - 40W manually adjustable; -Ch3 4 - 40W manually adjustable; Option 2: -Ch1 4 - 80W manually adjustable; -Ch2 4 - 80W manually adjustable; -Ch3 4 - 80W manually adjustable

VIP256PC is a hand carried jammer covering the following frequency bands: CDMA800, GSM900 and GSM1800.


V I P - 5 0 0 H I G H P O W E R B O M B J A M M E R ™

( R O O F M O U N T E D )

The VIP 500 is a roof mounted Bomb Jammer™ used to distribute high power RF interference over a broad area in order to neutralize remote controlled IED threats such as roadside bombs.

SPECIFICATIONS - Roof Mounted Construction - Easy Installation on the Vehicle - Most Antennas Incorporated in Jammer Case - Low Power Loss due to short Antenna Cables - Better Cooling Independent from Vehicle Cooling - Built-in Dust Filter - Custom Power over Frequency Distribution conformable to threats usage - Very fast random frequency sweeping technology - Wired Remote Control - Power Supply 21 – 30 V DC - Current Consumption 120 A from 24V.

Module # Freq. Range-

MHz Power, Watts 1 25 – 140 80 2 136 – 174 80

3 170 – 310 80 4 290 – 430 80 5 430 – 470 80

6 470–800 50 7 800 – 1000 40

8 GSM900

switchable 40 9 1000–1800 50 10 1800–2000 40

11 GSM1800 switchable 40

12 2000 – 2500 50 Total 710

Option

13 2500–4000 25 14 4000–6000 25 760 Total


H i g h P o w e r B a r r a g e J a m m e r V I P 3 0 0 R

The VIP 300R is a roof mounted Bomb Jammer™ used to distribute high power RF interference over a focuessed range to neutralize remote controlled IED threats such as roadside bombs.

SPECIFICATIONS Roof Mounted Construction Easy Installation on the Vehicle Most Antennas Incorporated in Jammer Case Low Power Loss due to short Antenna Cables Better Cooling Independent from Vehicle Cooling Built-in Dust Filter Crew Protection Against Harmful RF Emissions Output Power more than 200W (base version). Extensions up

to 300 W available. Instantaneous Frequency Band 25 – 2500 MHz. Extensions up

to 6 GHz available Custom Power over Frequency Distribution conformable to

threats usage Very fast random frequency sweeping technology. Wired Remote Control Power Supply 10.5 – 15 V DC Current Consumption 80 A from 12V Unlimited Operation Time with engine running Does not require modification to the vehicle's electrical system

Module # Freq. Range, MHz

Power (Watts)

1 25-150 80

2 150-500 70

3 500-800 20

4 800-1000, switchable 35

5 1000-1800 14

6 1800-2000, switcha-ble 35

7 2000-2500 20

Total 274

Option

8 2500-3000 15

290


V I P - 3 0 0 T C O V E R T I E D J A M M E R —

T R U N K M O U N T E D V E R S I O N

The VIP 300T is an in-vehicle mounted Bomb Jammer™ used to counter RCIED threats such as IED and Roadside Bomb devices.

Specifications - Trunk Mounted Construction - Easy Installation on the Vehicle - Most Antennas Incorporated in Roof Mounted Case - Output Power more than 200W (base version). Extensions up to 300 W available. - Instantaneous Frequency Band 25 – 2500 MHz. Extensions up to 6 GHz available - Custom Power over Frequency Distribution conformable to threats usage - Very fast random frequency sweeping technology. - Wired Remote Control - Power Supply 10.5 – 15 V DC - Current Consumption 80 A from 12V - Unlimited Operation Time with engine running - Does not require modifications to the vehicle’s electrical system - Allows for installation between vehicles. Antennas and wiring harnesses can be pre-installed to allow easy exchange between vehicles

Module № Frequency

Range - MHz Power - Watts

1 25 – 150 80

2 150 – 500 70

3 500 – 800 20

4 800 – 1000, switchable 35

5 1000–1800 14

6 1800 – 2000,

switchable 35

7 2000 – 2500 20

Total 274

Option

8 2500–3000 15

Total

290


V I P - 3 0 0 T E H i g h P o w e r B a r r a g e J a m m e r

Providing an extended RF Jamming envelope, the VIP300TE exudes electromagnetic interference using a full force barrage of energy in a manner that attacks radio waves at the receiving end. This is used to counter a radio triggering device from receiving a detonation signal.

Trunk Mounted Construction Easy Installation on the Vehicle Most Antennas Incorporated into the Low pro-

file Roof Mounted Case Output Power more than 280W (250 = Average

for the 300T Class Jammers) Instantaneous Frequency Band 25 – 6000 MHz Custom Power over Frequency Distribution

conformable to threat usage Fast random frequency sweeping technology

(Proprietary) Wired Remote Control Power Supply 10.5 – 15 V DC Current Consumption 90 A from 12V Unlimited Operation Time with engine running No electrical system modification required Allows for installation between vehicles - Antennas and wiring harnesses can be pre-installed to allow easy exchange between vehicles

Module #

Frequency Emission Range in

MHz Power in Watts

Distribution 1 25 – 150 80 2 150 – 500 70 3 500 – 800 20

4 800 – 1000, switchable 35

5 1000–1800 14

6 1800 – 2000,

switchable 35

7 2000 – 3000 20

8 3000–6000 20 Total 294


V I P - 3 0 0 P M a n P a c k P r o g r a m m a b l e

B a r r a g e J a m m e r

SPECIFICATIONS

Trunk Mounted Construction

Easy Installation on the Vehicle

Most Antennas Incorporated in Roof Mounted Case

Output Power more than 200W (base version). Extensions up to 300 W available.

Standard Frequency Coverage 25 – 2000 MHz. Extensions up to 6 GHz available

Modular Construction

Fully Programmable Modules. Frequency Sub-bands and Output Power must be programmed.

Up to 10 Preprogrammed Configurations Available for Each Module.

Up to 10 Frequency Sub-bands in Each Configuration.

Preprogrammed Configurations Selectable via Remote Control Device

Fast random frequency sweeping technology.

Thermostatic Design for Frequency Stability over Temperature

PLL Auto-calibration

Wired Remote Control via RS-485 bus

Modules Programming via USB Interface

Power Supply 10.5 – 15 V DC

Current Consumption 80 A from 12V

Operating Time: Unlimited Operation Time with engine running

Does not require modification of the vehicle’s electrical system

Allows for installation between vehicles. Antennas and wiring harnesses can be pre-installed to allow easy exchange between vehicles

Fast random frequency sweeping technology.

Module # Freq. Range, MHz Power (Watts)

1 25-520 60

2 80-1000, switchable 30

3 1800-2000, switchable 30

Total 120

Module # Freq. Range, MHz Power (Watts)

1 25-520 60

2 500-2500 50

Total 110

The VIP300P is an advanced RF Jammer with built into a portable Back Pack configuration giving the user mobility during counterterrorist operations.

Documents

HSS Jamming Systems RF, Cellular, & Bomb …RF, Cellular, & Bomb Jammer Technical Specifications At HSS, our Jamming Systems are designed with precision and may include the following