Embed Size (px)
Citation preview
Brochure
HSE Drilling Services
Project Solutions ● Manpower ● Managed Services
Copyright © 2014
Health, Safety and Environmental Specialists
HI/HDS/15
Jerrard Winter Managing Director HAZTEK INTERNATIONAL
Our Values HSE services is not just our business, it is our passion and everybody working for Haztek International is
committed to this principal. This means each and every customer is guaranteed total commitment from a dedicated and driven work force.
No compromises.
Our People We have extensive HSE expertise across a wide range of disciplines. From the staff in our central operation
through to our field consultants, our employees are our greatest asset and we can ensure our customers
integrity, discipline and total commitment.
Our Aim We aim to provide the most efficient and effective HSE service for all our customers in the quickest possible
time, with no compromises in the safety or standards. All HSE obligations will be fulfilled with high calibre
personnel and accountability of the highest standard.
Project Solutions ● Manpower ● Managed Services
Copyright © 2014
Haztek International provides a comprehensive range of
specialised management, technical, engineering and resource
services to the high-hazard and special risk industries. While specialising in the oil and gas sector, Haztek International
also provides HSE services to the petrochemical, chemical,
power and marine environments from design all the way
through engineering, construction, commissioning and into
operations. Orchestrating seamless events, Haztek International efficiently
tailors and integrates services to suit our clients’ needs. Our
technical experts, who are highly trained and knowledgeable
about all aspects of health, safety and environmental
management, understand the requirements through all phases
of oil and gas operations including feasibility studies, EPCs,
construction, SIMOPs, shutdowns, turnarounds and general
operations.
Haztek will provides a tailor-made solution that saves
money and streamlines the entire process, without
compromising on safety.
Our expertise
Haztek and its project team members have experience in the
following project delivery to the drilling industry on a global
basis:
HSE case full development; HSE case sectional development and peer review/gap
analysis of client developed material; development of full MHRA reports and information such as
SOOB matrix for HSE case inclusion or as standalone
qualitative risk reports; environmental impact assessments, risk-based sensitivity
studies (QRA etc.), and vulnerability and reliability
assessments (FTA, FMEA, FMECA, RBI and RBM
programmes); on-hire pre-survey reviews and operator/owner systems
integration including HSE case HSEMS merging for
COMOPS or SIMOPS; lifecycle and management of change support (HAZOP, SCE/
SCA development, performance standards and written
schemes); HSE management system development, gap analysis and
audit including KPI establishment and measurement by
independent review; and emergency response training and scenarios including full-
time/desktop exercises.
Key stages of HSE drilling services
Our experience
Haztek International has carried out numerous HSE safety
cases to date for various rig types:
platform rigs
drill ships
drill barges
jack-ups
semi-subs
land rigs
submersibles
tender rig professionals
Ph
ase
s
Managed Services Team
HSE Services Manager
Manpower Manager
HSE Technical Support
Mobility and Logistics
Scope
Preparation
Planning
Execution
Evaluation
Re
spo
nsi
bili
ty
Project Solutions ● Managed Services ● Manpower Solutions
Copyright © 2014
HSE drilling services
Identify Hazards MHRA Report and
SOOB Matrix Evaluate Risk Update Safety Case IADC Section 4
Compliance
Key to the BowTie
control and
assessment process is
the validation of
identified barriers by:
hardware – function,
availability, reliability,
interdependency and
survivability in an MAH
event – and process
like MOC, for safety
critical elements; and
software and
procedure –
confirmation that
procedural controls are
in place, fit for purpose
and audited as part of
the HSEMS lifecycle.
In this process Haztek
uses assessment
tables that are pre-populated sections
from hazard checklist
ISO 17776:2000(E).
Identification of
hazards.
Evaluation of risk and
identification of risk
reduction measures,
using the client risk
matrix and developed
acceptance criteria.
The SOOB matrix is
developed from the
MHRA process
assisting the worksite
in distinguishing
between a ‘stop work’
condition and a
‘proceed with caution’
condition.
The MHRA report
specifically addresses
Section 4 of the HSE
case and further
provides information to
the remaining sections
relating to hazard
management,
response requirements
and lifecycle activities.
Section 4 of the IADC
HSE case is an
integrated part of the
MHRA report and is an
underpinning
document to the
overall HSE case. It is
continuously reviewed
against any changes
from the management
or engineering
standpoint to ensure
that hazards are
identified, assessed
and managed in the
correct manner.
The HSE case
sections are updated in
parallel to the MHRA
process to ensure that
information transfer is
maximised and that
impacts or potential
changes are identified
at an early stage so
that appropriate
actions/changes can
be addressed.
The HSE case is
subject to continuous
improvement and
audit.
Project Solutions ● Managed Services ● Manpower Solutions
Copyright © 2014
Drilling
Haztek International is uniquely placed to provide a fully integrated service to the drilling industry by virtue of a blend of
experience in project execution, best placed methodologies and the correct blend of staff to deliver these. Haztek fully meets all aspects of the IADC guidelines in its deliverables as well as enhancements in such areas as existing
documentation and compliance reviews, communicating the results and long-term support in lifecycle management.
Our approach
Project Solutions ● Managed Services ● Manpower Solutions
Copyright © 2014
Haztek International interrogates state-of-the-art technology on a day-to-day basis. One such resource is
our technical library, used as an educational platform as well as a way of communicating documents
between our clients and colleagues. We find that using BowTieXP is a powerful tool in helping our clients
understand major hazards and risks
Business Line
(Application)
General
Product Line
(Core Competency)
Description
Consulting
Services
Courses
Software
Regulatory
Compliance HSE Case COMAH Case development
As required Offshore Installation HSE Case development
IADC HSE Case development
HSE Case
underpinning and
standalone studies
MHRA/SHIDAC studies using BowTie presentations
FMEA/FMECA of critical systems
SCE/SCA development
Performance Standard development
EERA/ESSA
PFEER/DCR
QRA
Vulnerability assessment
Bridging documents, MOPO (Simops/Combined Ops) and
ALARP review
Peer Review Existing HSE Case reviews and performance benchmarking
Interfacing documentation with Clients
Education HSE Case roll out programmes
HSE Case prompt cards systems for HSE Cases and MHA SCE/SCA responsibility cards (CARE System)
Audit KPI Measurement
Tailored programmes to HSE Case performance
SCE/SCA/P Stds verification
Lifecycle
Management -
Software developed
with Client
Partnering for HSE Case Management across all operational
assets
SCE/SCA and Performance Standards update and
management
Due Diligence Compliance Audits and Gap analysis
Documentation review and verification
Fit for purpose reviews
Specific and
Client
Tailored
programmes
Integrity Standalone SCE/SCA and Performance Standards
Tailored critical and vulnerability reviews
Optimisation studies
Failure investigations
General Training and competency assessments/ management
Performance Measurement
HSE Case Services
Consequence Analysis and Dispersion Modelling
Environmental Studies / Consequence Analysis /
Dispersion Modelling
Fire and Gas Studies / Design / Mapping
Gap Analysis
Hazard Register
HAZOP / HAZID / ENVID
Haztek team leader and onsite focal point
HSE Audit
HSE Case, COMAH and IPPC submissions
HSE Management and Quality Management
IADC MHRA/HSE Safety Cases
Logistics & Mobility
Operations Management Systems (OMS)
Performance Standards
Procedures/Standards
Pre Start Up Safety Review (PSSR)
Process Hazard Analysis
Provision of PPE
QRA’s
Reliability Availability Maintainability (RAM)
Risk Assessment
Safety Management Systems
Safety Studies / Cases / training
SCE/SCA listing, performance standards
SIL Assessment
Managed Services Haztek International 120 Bunns Lane, London, NW7 2AS United Kingdom
Other Haztek capabilities include: For further information please contact:
Phone: +44 (0) 203 114 2190
Fax: +44 (0) 203 114 2105
E-mail: [email protected]
www.haztekinternational.com
Haztek International provides a comprehensive range of
specialised management, technical, engineering and
resource services to the high-hazard and special risk
industries.
Copyright © 2014 Haztek International Ltd. All rights reserved. This document is for the intended use of Haztek International Ltd. employees, clients, and potential clients. Any unauthorised use of this catalogue could result in prosecution. No part of
this catalogue may be reproduced or modified in any form by any means without permission from the publisher.
Se
rvic
e D
escri
ptio
n
Project Stage
FEED, Feasibility,
Conceptual,
Detailed Design
Seismic
Drilling
Procurement Construction Mechanical
Completion Commissioning Start Up Maintenance Decommissioning Hand Over Operations
Combined
Operations Shutdowns /
Turnarounds
HSE Audits
Risk Assessments
Hazard Register
HAZID
HAZOP
SIL Assessments
Safety Studies
HSE Case
Reliability Availability
(RAM)
Procedures / Standards
Environmental Studies
Operations Management
Systems (OMS)
Pre Start Up Safety
Review (PSSR)
Capabilities
