51
HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications

HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

HPF – Parker High Performance Flange Systemthe tear out-proof flange system for high pressure applications

Page 2: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

HPF – Parker High Perfomance Flange System

Introduction........................................................................................................................................................................ Page..2

General.information..................................................................................................................................................................... 5

Technical.data............................................................................................................................................................................... 9

Installation.................................................................................................................................................................................. 15

Machine,.tooling.and.equipment.............................................................................................................................................. 21

Ordering.information/Nomenclature...................................................................................................................................... 27

HPF.–.SAE.6000/ISO.6162-2...................................................................................................................................................... 31

HPF.–.Square.Flange/ISO.6164................................................................................................................................................. 45

Tube.clamps................................................................................................................................................................................ 59

Tubes........................................................................................................................................................................................... 93

Table of contents

HPF – Parker High Perfomance Flange System

For your safety!

Under.certain.circumstances,.tube.fittings.can.be.subjected.to.extreme.loadings..such.as.vibration.and.uncontrolled.pressure.peaks..

Only.by.using.genuine.Parker.components.and.following.Parker.assembly..instructions.can.you.be.assured.of.the.reliability.and.safety.of.the.products.and..their.conformity.to.the.applicable.standards.

Failure.to.follow.this.rule.can.adversely.affect.the.functional.safety.and.reliability..of.products,.cause.personal.injury,.property.damage,.and.result.in.loss.of.your..guarantee.rights.

Subject.to.alteration

©.Copyright.2008,.Parker.Hannifin.Corporation..All.Rights.Reserved.

Page 3: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

� �

IntroductionIntroduction

Performance Plus

Since.1929,.Parker.Hannifin.Corporation.has.served.the.market-place.with.dependable.fluid.power.technology..Today,.Parker.offers.more.than.100,000.quality.products.for.a.broad.range.of.industries.and.applications..No.other.manufacturer.presents.a.product.line.as.broad.as.Parker‘s,.nor.an.expertise.as.far-reach-ing.in.hydraulic.and.pneumatic.systems.and.components..Much.of.that.expertise.originates.with.Parker‘s.precision-made.tube.fittings,.which.were.among.the.first.products.manufac-tured.by.the.company..As.such,.they.reflect.Parker‘s.ongoing.commitment.to.excellence.

With.more.than.seventy.years.of.experience.in.product.design,.engineering,.applications.technology.and.manufacturing,.the.Tube.Fittings.Division.Europe.holds.a.leadership.position.few.other.manufacturers.can.claim..This.leadership.is.further.heightened.and.enhanced.by.the.sharing.of.technology.only.possible.in.Parker‘s.corporate.family.

Topflight Experience

Parker.has.used.the.background.data.and.knowledge.gained.from.important.industrial,.mobile,.offshore.and.other.applica-tions.to.create.the.broadest.and.best.performing.line.of.stand-ard.tube.fittings.in.the.world.

Why is Parker a topflight manufacturer of fittings?

There.are.many.reasons,.but.at.the.heart.is.the.design.and.manufacturing.excellence.that.goes.into.every.Parker.product.

Worldwide standardising activities

The.Parker.Fluid.Connectors.Group.supports.the.national.and.international.standardising.activities..Experienced.engineers.from.certain.countries.and.Divisions.give.their.input.to.national.committees.like.SAE,.BS,.and.DIN.committees.in.cooperation.with.the.users.of.the.products..As.a.result,.many.ISO.Fluid.Con-nector.standards.have.been.published..These.ISO.standards.are.the.platform.for.the.international.trading,.interchangeability.and.availability.that.is.necessary.for.all.globally.operating.com-panies.using.fluid.power.technology.

The Tube Fittings Authority:

Tube Fittings Division Europe

HPF

Page 4: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

� �

General information

Introduction

Page 5: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

� �

General information

HPF – The technology

HPF Performance

The.system.is.generally.applicable.for.working.pressures.up.to.420.bar..Force.distribution.on.the.components.is.ideal,.as.the.diagram.makes.clear.In.contrast.to.conventional.O-rings,.the.special.profile.seal.is.especially.resistant.to.gap.extrusion..A.further.significant.advantage.against.other.systems.is.the.compactness.of.the.HPF.system..This.refers.to.the.minimum.length.from.the.port.to.the.starting.point.of.the.tube.bend,.an.important.factor.in.designs.having.only.limited.access.and.space.in.which.to.assemble.

Flanges instead of Welding

Error free Assembly

Nowadays.many.tube.connections.are.welded..But.because.even.the.best.welders.can.make.mistakes,.every.single.welded.seam.has.to.be.checked..This.of.course.leads.to.enormous.loss.of.time.and.corresponding.costs..However,.problems.usually.start.already.when.trying.to.find.qualified.personnel.So.Parker‘s.HPF.system.offers.several.advantages.compared.to.welded.connections..

•..The.welding.of.galvanic.zinc-plated.tubes.is.always.problem-atic.–.HPF.can.be.used.with.zinc-plated.tubes.(No.painting.afterwards.necessary).

•..Welded.points.must.be.descaled.and.often.stained.(That.can.harm.the.environment!).

•..The.tube.does.not.have.to.be.cleaned.after.flanging.as.it.does.in.welded.connections..

•..There.are.no.noxious.gases.arising.from.the.flanging.process.and.there.is.no.risk.of.explosion.or.fire.

Cr(VI)-free Corrosion Protection

It.goes.without.saying.that.all.the.components.have.Cr(VI)-free.surfaces.Parker.is.very.conscious.of.its.responsibility.to.the.environment.and.to.human.health.and.has.therefore.given.up.the.employ-ment.of.surfaces.containing.Cr(VI)..

Parker the System Supplier

Parker.products.are.always.available.world.wide.regardless.of.what.is.required..Parker.considers.itself.a.partner.of.all.of.its.customers.including.activities.such.as.development,.design,.execution.and.maintenance.for.customer-specific.projects..This.service.also.includes.the.holding.of.stocks.for.customers.as.well.as.looking.after.them.on.site..Naturally.all.of.this.leads.to.enormous.cost.reductions.

General information

HPF – The technology

Parker‘s Mechanical Flange System for the toughest requirements

Parker‘s.HPF.system.was.specially.designed.and.set.up.to.meet.the.freedom.from.leakage,.performance.and.high.working.pressure.requirements.of.mobile.hydraulics.and.the.industrial.euipment,.such.as.injection.moulding.

The System

The.HPF.system.is.appropriate.for.the.tube.sizes.normally.used.in.these.industries,.for.tube.diameters.from.25.to.88.mm.and.for.wall.thicknesses.up.to.14.mm..The.system.is.designed.for.flange.patterns.to.ISO.6162-2.(code.62),.to.ISO.6164,.and.also.to.ISO.6162-1.(code.61).if.necessary.

Learning from Nature

The.best.solutions.to.complex.design.problems.are.often.found.in.nature..The.flaring.of.a.tube.is.similar.to.the.shape.of.a.branch.where.it.joins.the.trunk.of.a.tree..The.tube.is.flared.by.means.of.axial.hydraulic.pressure.either.to.37°.or.10°.in.accord-ance.with.the.systems.nowadays.found.in.the.market.place..The.HPF.system.combines.both.these.possibilities..The.formation.zone.of.the.tube.corresponds.to.a.parabola.running.from.10°.to.37°..An.additional.safety.feature.against.strong.system.vibration.arises.because.of.this.flat.formation.zone..

The HPF Connector – Strong Teamwork for the Toughest Demands

At.the.heart.of.the.HPF.connector.is.the.lockring..It.is.specially.hardened.and.is.manufactured.with.a.special.contour..This.ring,.which.supports.the.tube.assembly.from.the.outside,.provides.the.connector.with.additional.tear.out.safety..An.insert.is.introduced.into.the.formed.tube;.it.seals.on.the.port.side.with.a.choice.of.either.a.special.profile.seal.or.an.O-ring,.and.on.the.tube.side.with.an.O-ring..The.insert.does.not.have.a.toothed.profile.and.therefore.makes.repeat.assemblies.possible.without.problems.

No Additional Assembly Tools Required

Unlike.other.mechanical.flange.systems,.HPF.does.not.require.any.hydraulic.bolt.drivers.during.assembly..So.even.in.difficult.conditions,.the.bolts.can.be.simply.tightened..

HPF Machine

A.hydraulic.axial.press.is.required.for.tube.forming..This.is.available.as.a.complete.WorkCentre.with.integrated.tool.com-partments..It.stands.on.transportation.casters.and.can.be.easily.moved.by.one.person;.it.also.has.crane.and.lift.truck.points.to.provide.maximum.flexibility.

Page 6: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

� �

Technical data

General information

Page 7: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

Technical data

Pressure reductions and temperatures

Required pressure reductions (dependent on the material) with reference to the catalogue pressures for higher temperatures. Both metal fitting material and elastomeric sealing compound have to be selected according to the temperature range of the system.

Permissible operating temperature

Ambient temperature of hydraulic and pneumatic applications

Temperature not permissible

Perbunan = registered trademark of Bayer

Calculation example: Temperature = �00 °CMaterial = Stainless steelPressure reduction = �0%Pressure reduction tubes = ��.�%PN tube ��x�.�/��. DIN���� III = ��� bar

Formula:

PN Connection �00 °C = �00 bar x (�00% - �0%) = ��0 bar �00% PN tube �00 °C = ��� bar x (�00% - ��.�%) = ��� bar �00%

F37 seal

The.F37.seal.was.developed.especially.for.use.with.SAE.flanges..Compared.to.a.standard.O-ring.the.special.profile.of.the.F37.seal.is.ideally.adapted.to.higher.pressures.or.unsuitable.surface.finish.of.the.flanges.The.particularly.low.compression.set.of.the.polyurethane.compound.ensures.dimensional.stability.of.the.seal.over.a.large.temperature.range..Its.high.extrusion.resistance.prevents.gap.extrusion.even.if.the.flanges.“breathe“.under.pressure..Due.to.

good.abrasion.resistance,.less.preparation.is.necessary.on.the.surface.finish.of.the.sealing.area..of.the.flange..The.frequently.occuring.“pumping“.phenomenon.of.O-rings.is.prevented.by.the.shape.of.the.F37.seal.

Application area

Static.sealing.for.SAE-FlangesWorking.pressure:.. ≤.600.barWorking.temperature:.. see.table.above

Materials

The.F37.seal.is.made.of.a.polyurethane.based.Parker.compound.with.a.hardness.of.approx..93.Shore.A..In.comparison.with.other.polyurethane.materials.currently.available.on.the.market,.it.excels.because.of.its.increased.heat.resistance,.improved.per-formance.against.hydrolysis.and.low.compression.values.

Technical data

Overview: Suitable tube sizes HPF

�00 bar ��0 bar ��0 bar ��� bar �00 bar ��0 bar

��x�.0 ��x�.0 ��x�.0 ��x�.0 --- ---

��x�.0 ��x�.0 ��x�.0 ��x�.0 ��x�.0 ��x�.0

�0x�.0 �0x�.0 �0x�.0 �0x�.0 --- ---

�0x�.0 �0x�.0 �0x�.0 �0x�.0 �0x�.0 �0x�.0

��x�.0 ��x�.0 ��x�.0 ��x�.0 --- ---

��x�.0 ��x�.0 ��x�.0 --- --- ---

��x�.0 ��x�.0 ��x�.0 ��x�.0 --- ---

��x�.0 ��x�.0 ��x�.0 ��x�.0 ��x�.0 ��x�.0

��x�.0 ��x�.0 ��x�.0 ��x�.0 --- ---

�0x�.0 �0x�.0 --- --- --- ---

�0x�.0 �0x�.0 �0x�.0 --- --- ---

�0x�.0 �0x�.0 �0x�.0 �0x�.0 --- ---

�0x�.0 �0x�.0 �0x�.0 �0x�.0 �0x�.0 �0x�.0

�0x�.0 �0x�.0 �0x�.0 �0x�.0 --- ---

��x�.0 ��x�.0 ��x�.0 ��x�.0 --- ---

��x�.� ��x�.� ��x�.� ��x�.� --- ---

��x��.� ��x��.� ��x��.� ��x��.� ��x��.� ---

�0x�.0 --- --- --- --- ---

�0x�.0 �0x�.0 �0x�.0 --- --- ---

�0x�0.0 �0x�0.0 �0x�0.0 �0x�0.0 --- ---

��x��.0 ��x��.0 ��x��.0 ��x��.0 --- ---

Table shows the nominal pressure PN with the use of tubes acc. to E 355 N (St. 52.4 NBK). For details see page 93 – chapter tubes

The pressure rates are based on the calculated pressure of the corresponding tubes. The pressure rates of the flange-components are designed with a safety factor of PN x �.

MaterialPressure reduction of permissible operating temperatures TB in °C

-�0 -�� -�0 -�� -�� +�0 +�0 +�00 +��0 +��0 +��� +�00 +��0 +�00 +�00

Steel + Steel tubes 0% ��% ��% ��%

Stainless steel + Stainless steel tubes

0% ��% �0% �0%

Sealing material NBR (e.g. Perbunan)

Sealing material FKM

Sealing material polyurethane (P5008))

Page 8: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Technical data

Flow diameter and wall thickness

Determining tube sizes for hydraulic systems

Proper.tube.material,.type.and.size.for.a.given.application.and.type.of.fitting.are.critical.for.efficient.and.trouble-free.operation.of.the.fluid.system..Selection.of.proper.tubing.involves.choosing.the.right.tube.material,.and.determining.the.optimum.tube.size.(O.D..and.wall.thickness).Proper.sizing.of.the.tube.for.various.parts.of.a.hydraulic.system.results.in.an.optimum.combination.of.efficient.and.cost.effec-tive.performance.A.tube.that.is.too.small.causes.high.fluid.velocity,.which.has.many.detrimental.effects..In.pressure.lines,.it.causes.high.friction.losses.and.turbulence,.both.resulting.in.high.pres-sure.drops.and.heat.generation..High.heat.accelerates.wear.in.moving.parts.and.rapid.aging.of.seals.and.hoses,.all.resulting.in.reduced.component.life..High.heat.generation.also.means.wasted.energy,.and.hence,.low.efficiency.Too.large.tubes.increase.system.cost..Thus,.optimum.tube..sizing.is.very.critical..The.following.is.a.simple.procedure.for.sizing.tubes.

Determine required flow diameter

Use.table.to.determine.recommended.flow.diameter.for.the.required.flow.rate.and.type.of.line.The.table.is.based.on.the.following.recommended.flow.veloci-ties.(DIN.24346):

Pressure lines – 3 – 5m

s

Return lines – 2 – 4m

s

Suction lines – 1m

s

Avoid flow rates > �m/s!The resulting forces are high and can destroy the tube lines.

If.you.wish.to.use.different.velocities.than.the.above,.use.one.of.the.following.formulae.to.determine.the.required.flow.diameter.

Tube - I.D. [mm] = 4,61 ·m

s

ltr.

minFlow

Velocity

Maximum flow

[l/min]

Flow diameter in millimeters� m/s

Pressure lines� m/s

Return lines� m/s

suction lines�0 �.� �.� ��.��� �.0 �0.� ��.��0 �.� ��.� �0.��� �0.� ��.� ��.��0 ��.� ��.� ��.��� ��.� ��.� ��.��0 ��.0 ��.� ��.��� ��.� ��.� �0.��0 ��.� ��.� ��.��� ��.� ��.� ��.��0 ��.0 �0.� ��.��� ��.� ��.� ��.��0 ��.� ��.� ��.��� ��.� ��.� ��.��0 ��.� ��.� ��.��� ��.0 ��.� ��.��0 ��.� ��.� ��.��� �0.� ��.� ��.�

�00 �0.� ��.� ��.���0 ��.� ��.� ��.���0 ��.� ��.� �0.���0 ��.� �0.� ��.���0 ��.� ��.� ��.���0 ��.� ��.� ��.���0 ��.� ��.� ��.���0 ��.� ��.� �0.���0 ��.� ��.� ��.���0 ��.� ��.� ��.��00 ��.� ��.� ��.���0 �0.� ��.� ��.���0 ��.� ��.� ��.���0 ��.� ��.� ��.���0 ��.� ��.� ��.��00 ��.� ��.� ��.���0 ��.� ��.� ��.���0 ��.0 ��.� ��.0��0 ��.� �0.� ��.���0 �0.� ��.� ��.��00 ��.� ��.� ��.���0 ��.� ��.� ��.��00 ��.� ��.� �0�.���0 ��.� ��.� �0�.��00 �0.� ��.� ���.���0 ��.� ��.� ���.��00 ��.� �0.� ���.0��0 ��.� ��.� ���.��00 ��.� ��.� ��0.���0 �0.� ��.� ���.��00 ��.� ��.� ���.���0 ��.� ��.0 ���.�

�000 ��.� ��.� ���.��0�0 ��.� ��.� ���.���00 ��.� ��.� ���.����0 ��.� �0.� ���.���00 ��.� ��.� ���.����0 ��.� ��.� ���.0��00 ��.� ��.0 ���.����0 ��.� ��.� ���.���00 ��.� ��.� ���.����0 ��.� �0�.� ���.���00 ��.� �0�.� ���.�

Technical data

Flow characteristics

Hydraulic.systems.are.in.most.cases.only.rated.with.a.flow.velocity.defined.on.the.basis.of.experience..The.pressure.losses.in.lines.are.not.taken.into.account,.or.measured.later.on.when.testing.the.system..As.the.pressure.losses.increase.porportional-ly.greater.than.the.flow.resistance,.it.is.important.to.achieve.the.best.rating.of.the.system,.so.that.they.are.already.taken.into.ac-count.when.planning.the.tube.connections..Calculation.is.not.as.difficult.as.it.is.often.thought,.and.this.chapter.is.intended.to.provide.a.guideline..Besides,.it.provides.information.on.how.ex-cessive.pressure.losses.can.be.avoided,.because.pressure.losses.result.in.losses.in.performance.and.excessive.heat..Noise.occurs.and.possibly.cavitation.in.suction.lines.

Medium

All.indications.given.with.regards.given.concerning.flow.restric-tions.and.to.flow.properties.refer.exclusively.to.liquids..For.gaseous.media,.the.variable.density.of.the.gas.must.additionally.be.taken.into.account.

Units

υ(T) = Kinematic viscosity of the medium depending on temperature

ρ(T) = Density of the medium depending on temperature

ζ = Individual pressure loss coefficient

Only.base.units.have.been.used..This.has.the.advantage.that.the.formulae.do.not.contain.correction.factors.and.there.is.no.danger.of.confusion,.e.g..that.values.are.used.with.the.wrong.unit..In.case.values.are.given.in.other.units.–.the.flow.rate.is.e.g..often.given.in.l/min.–.it.is.advisable.to.convert.them.into.the.base.units.before.starting.calculation.

Pressure losses in pipe lines

To.calculate.pressure.losses.in.pipe.lines,.it.must.first.be.deter-mined.whether.there.is.a.laminar.or.a.turbulent.flow..Laminar.flow.is.homogenous.and.without.turbulence..In.case.of.turbu-lent.flow,.the.losses.increase.much.more.quickly.

c = Flow velocitym

s

d = Pipe inside diameter [m]

L = Pipe length [m]

p = Pressure [Pa], 1 bar = 100000 Pa

m3

s

m3

sV = Flow rate , 1 = 6000

I

min

.

= Pipe friction factor

kg

m3

m2

s

kg

m3

m2

s

The.kind.of.flow.is.defined.by.the.Reynolds’.number..With.a.Reynolds’.number.of.more.than.2320,.the.flow.changes.to.turbulent..The.Reynolds’.number.is.calculated.according.to.the.formula:

The.Reynolds‘.number.is.a.non-dimensional.number..The.criti-cal.fluid.velocity.at.which.the.flow.regime.can.change,.is.thus.calculated.from:

With.a.given.flow.rate,.the.fluid.velocity.can.be.calculated..according.to.the.formula:

Subsequently,.the.pipe.friction.factor.λ.is.a.function.of.the.Reynolds’.number.and.also.depends.on.the.roughness.of.the.pipe..As.hydraulically.smooth.pipes.can.generally.be.assumed.in.hydraulic.applications,.the.pipe.friction.factor.λ.is.calculated.according.to.the.following.formula:

Finally,.if.all.factors.are.known,.the.pressure.loss.in.certain.pipe.lines.can.be.calculated.according.to.the.formula:

Calculation of individual losses

A.hydraulic.system.does.not.only.incorporate.pipes,.but.also.valves,.fittings,.pipe.bends.etc..that.cause.flow.losses..These.in-dividual.losses.are.often.much.higher.than.the.pipe.losses.and.are.calculated.according.to.the.following.formula:

Flow profile Flow profilewith laminar flow with turbulent flow

c · d

υ(T)Re =

c cr = 2320 ·d

υ(T) m

s

c =d2 · π

V · 4 m

s

.

laminar �ow, (Re < 2320): =64

Re

turbulent flow, (Re > 2320): =0.3164

4 Re

Δp = λ · · [Pa]Ld

ρ(T) · c2

2

Δp = ζ · ρ(T) · [Pa]c2

2

Tube bends

With.pipe.bends,.the.pressure.loss.coefficient.results.from.the.ratio.of.bend.to.inside.diameter.(R/d).

Bend radius/Inside diameter Pressure loss coefficient ζ

� 0.��

� 0.��

� and more 0.��

Page 9: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Installation

Technical data

Page 10: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Installation

Tubeforming with Parflare® HPF

•..Adjust.tube.stop.wheel.according.to.chart.

•..Tighten.locking.screw.for.tube.stop.adjustment

5

Connections.are.not..to.mount.without.the.lockring

•..Place.flange.components.on.tube.before.flaring

•..First.of.all,.place.the.flange.in.correct.direction

•..Then.lockring.in.correct.direction

6

•..Insert.tube.so.that.it.lies.against.the.stop.

•..Place.upper.jaw.halfSupport.and.secure.long.and.heavy.tubes.horizon-tally

7

•..Swing.latch.in.position.“CLOSED“.

•.Pull.clamping.jaws.withtube.into.front.plate

8

9 10

•..Open.protective.hood•..Push.tube.with.clamping.

jaw.completely.out.of.the.front.plate.up.to.the.stop.of.both.guide.bolts

•..Clamp.in.“OPEN“.position•..Lift.upper.jaw.and.remove.

tube

11

Oil.flaring.pin.with.LUBSS•..Close.protective.hood•.Switch.on.main.switch•.Machine.is.ready.for.

flaring.operation

•..Start.flaring.operation.by.actuating.button

•..Observe.pressure.on.manometer

•..On.reaching.chart.value,.end.flaring.operation

•..Run.flaring.pin.to.start.position

•..Setting.values.are..recommendations.only

•..Adjust.setting.to.specific.tube.quality.and.tolerance

Installation

•..Minimum.straight.length.L1.before.bend

1

•.Cut.tube.squarely.•.max..±.1°.deviation

Burrs.can.result.in.sealing.problems.or.tool.wear

3

•..Proper.deburring.and.cleaning.of.inner.and.outer.diameter

•.Chamfer.1.mm.x.45°.maxBurrs.can.result.in.sealing.problems.or.tool.wear

4

•..Tube.length.before..flaring.determined.by.distance.X

2

Xafter

before

flaring

•..Clean.tube.before.flaring•..Adhere.to.project.specification

Dirt.can.result.in.sealing.problems.or.tool.wear

5

Tube preparation

Tube forming with Parflare® HPF

•..Open.safety.cover•..Latch.in.“OPEN“.position•..Cylinder.in.“BACK“

positionMain.switch.“OFF“.during.setting

1

•..Select.suitable.tools..according.to.chart

•..Check.flaring.pin.for.dirt,.wear.and.damage

•..Check.flaring.dies.for.dirt,.wear.and.damage

2

•..Insert.flaring.pin•..Fix.with.screw

3

•.For.inserting.clampingjaws.clamp.in.“OPEN“.position

•.Then.insert.lower.clamping.jaw

•.Tip.lower.clamping.jaw.to.make.things.easier

•.Push.clamping.jaw.onguide.bolt.to.stop

4

ON

OFF

ON

•..Select.suitable.tube.material

Selection of flange components•..Choose.components..

acc..to.the.relevant.tableLockrings.and.inserts.of.other.producers.are.strictly.permitted!

Tube selection

Tube O.D. x wall thickness

mm

Tube length determination

X mmL�

mm��x�.0 �.0

��0

��x�.0 �.��0x�.0 �.0��x�.0 �.���x�.0 �0.0��x�.0 ��.0��x�.0 �.��0x�.0 �.0�0x�.0 �.0�0x�.0 �.0�0x�.0 �0.0��x�.0 �.0��x�.� �.0

��x��.� ��.��0x�0.0 ��.0��x��.0 ��.0

ON

OFF

ON

Tubemm

Tube stopmm

Assembly pressure

bar��x�.0 �.� �00��x�.0 �.� ��0�0x�.0 �.0 �00��x�.0 �.� ��0��x�.0 �.� �00��x�.0 �.� �00��x�.0 �.0 �00�0x�.0 �.0 ��0�0x�.0 �.0 �00�0x�.0 �.0 �00�0x�.0 �.0 �00��x�.0 �.0 �00��x�.� �.0 �00

��x��.� �0.0 �00�0x�0.0 �0.0 �00��x��.0 �0.0 �00

Page 11: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Installation

Checking instructions for Parflare® HPF tools

•..Clean.pin.for.checking•..Visual.check:.

surface.must.be.free.of.wear.and.damage

1

•..Clean.die.halves.for..checking

•..Visual.check:.gripping.surface.must.be..clean.and.free.of.wear

•..Use.wire.brush.to..remove.metal.particles.from.gripping.surface

2

Tools for Parflare® machinesUse.of.worn.or.non-suitable.tooling.may.result.in.flange.failure.and..damage.of.machineTools.must.be.checked.regularly,.at.least.after.50.assembliesWorn.tools.must.be.replacedUse.only.genuine.Parker.PartsTools.must.always.be.kept.clean.and.lubricated

Installation

Checking the flare

•..Clean.flare.for.inspection•..Check.sealing.surface.for.

cracks,.burrs,.scratches.and.pittingDo.not.use.any.tubing..with.faulty.sealing.faces..(risk.of.leakage)

1

•..Dimensional.check.of.the.flare.according.to.chartDo.not.use.any.tubing.with.incorrectly.dimensioned.flaring.diameters

2

Installation HPF Flange connection

•..Tube.end.must.be.clean•..Fix.insert•..If.necessary,.use.

plastic.hammerAvoid.damage.to..sealing.surfaces

1

•..Lubricate.insert

2 3 4

•..Check.correct.seating.of.sealing.rings

•..Sealing.face.must.not.be.dirty.or.damaged

•..Position.flange.and..place.boltsTube.assembly.must.be.stress-free.at.both.ends.Bolts.must.move.freelyDo.not.use.shorter.bolts.indicated.in.the.catalogue!Parker.recommends.to.lubricate.the.bolts

•..Hand.tighten.bolts•..Torque.bolts.in.diagonal.

sequence.from.1.to.4•..Torque.bolts.in.small.

increments.to.the.appro-priate.torque.level.listed.in.chart

5

•..Be.sure.the.flange.seating.is.correct

•..Flange.gap.must.be.the.same.at.all.3.points

6

minmax

Ø D�

Tubemm

Ø D� ± �mm

��x�.0 ��.0��x�.0 ��.0�0x�.0 ��.0��x�.0 ��.0��x�.0 ��.0��x�.0 ��.���x�.0 ��.��0x�.0 ��.0�0x�.0 ��.0�0x�.0 ��.0�0x�.0 ��.0��x�.0 ��.0��x�.� ��.0

��x��.� ��.0�0x�0.0 ��.���x��.0 �0�.0

Flangesize

ISO ����-� ISO ����Bolt�0.�

TorqueNm

Bolt�0.�

TorqueNm

�/�“ M�0 ���“ M�� ��

� �/�“ M�� ��0� �/�“ M�� ��0

�“ M�0 ��0 M�� ��0� �/�“ M�0 ��0

�“ M�� ��0�“ M�0 ��00

Page 12: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

Machine, tooling and equipment

Installation

Page 13: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Machine, tooling and equipment

Parflare® HPF 120

Application Flaring machine for HPF flange connectorsProcess Tube forming by axial pressureDesign On-site and workshop machine for individual tube preparation

OperationManual tube clampingHydraulic driven toolProcess control by setting wheels and pressure display

Tube diameter �� to �� mm, optional ��0 mmTube material Steel and stainless steel

Cycle time� – � minutes flaring time� – � minutes total cycle time

Economic production quantity max. �0 assemblies per day

ToolsFlaring pin BHPF...Clamping die set MHPF...

Tool lubrication manualLubricant for pin LUBSS Machine dimensions (L x W x H) �00 x ��0 x �.��0 mmWeight approx. ��0 kgNominal voltage �00 V/�Ph/�.� kWConnecting cable �m/CEE ��ASound pressure level Less than �0 dB (A)

Specification

Consistent.flaring.result.is.achieved.by.setting.of.tube.stop.

Tubemm

Tube stopmm

Assemblypressure

bar25x3.0 5.5 10025x4.0 5.5 15030x5.0 7.0 20038x4.0 3.5 15038x5.0 3.5 20038x6.0 3.5 30042x5.0 5.0 40050x5.0 7.0 25050x6.0 8.0 30050x8.0 9.0 60060x8.0 8.0 50065x8.0 5.0 30066x8.5 6.0 500

75x12.5 10.0 70080x10.0 10.0 70088x14.0 10.0 700

Machine, tooling and equipment

Parflare® HPF 120

Workshop machine for manufacturing HPF flange connections

The.Parflare®.HPF.120.has.been.developed.for.tube.end.forming.by.axial.pressure.operation.for.the.HPF.flange.system.and.is.a.workshop.machine.for.project.operation.

Flange.flaring.is.achieved.by.axial.pressure.of.the.tool.into.the.tube.end..The.flaring.contour.matches.the.Parker.HPF.insert.

The.feed.movement.of.the.tool.is.produced.by.an.hydraulic.cylinder.which.is.driven.by.a.unit.in.the.machine.housing..The.return.feed.is.also.electro-hydraulic..The.tubes.are.clamped.in.clamping.jaw.sets.which.are.clamped.by.means.of.a.cone..The.machine.is.equipped.with.an.adjustable.stop.for.the.tube.end..This.enables.flared.flanges.to.be.produced.with.consistent.qual-ity..The.split.clamping.jaws.and.the.tube.stop.allow.simple.op-eration.and.consistent.results..The.separation.of.the.clamping.jaws.and.removal.of.the.tubes.is.made.easier.by.a.latch.device.

The.machine.is.designed.for.project.work.on.site..When.the.doors.are.opened,.the.Parflare®.HPF.120.is.transformed.into.a.completely.equipped.WorkCentre..At.the.front.of.the.machine.there.is.a.tool.magazine.in.which.all.the.tools.can.be.viewed.and.cleanly.laid.out..The.WorkCentre.can.be.manoeuvered.on.casters.as.well.as..by.crane.or.forklift..

The.Parflare®.HPF.120.is.supplied.ready.to.go.but.tools.must.be.ordered.separately..Special.clamping.jaws.and.pins.are.required.for.each.tube.size.

Application•Alternative.to.conventional.welded.connections.for.

hydraulic.lines•Workshop.machine.for.project.work,.on-site.assembly.

and.maintenance•.Not.suitable.for.high.volume.production

The.Parflare®.HPF.120.is.a.totally.equipped.WorkCentre.for.workshop.use.

Page 14: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Machine, tooling and equipment

Parflare® HPF 120

Ordering

Type Order codeParflare® HPF ��0 WorkCentreReady to use, including operating manual, filled with hydraulic oil and lubricant Without tools Basic machine �00 V, � phase, �0 Hz

HPF��0EU�00V

Catalogue ����/UK ���� via Parker catalogue service EMDCOperating manual UK/DE HPF��0/MANUALTool lubricant qty: �L LUBSS

Parflare®.machines.are.shipped.in.special.containers.which.should.be.kept.for.future.transportation.to.avoid.damage.

Clamping die set „MHPF“

Pressure pin „BHPF“

Tube OD mm Order code Order code�� MHPF�� BHPF��-���0 MHPF�0 BHPF��-���� MHPF�� BHPF��-�0�� MHPF�� BHPF��-�0�0 MHPF�0 BHPF��-�0�0 MHPF�0 BHPF�0-�0�� MHPF�� BHPF�0-�0�� MHPF�� BHPF�0-�0�� MHPF�� BHPF�0-�0�0 MHPF�0 BHPF�0-�0�� MHPF�� BHPF�0-�0

Tool lifetime

Assembly.tools.are.subject.to.wear.and.must.be.regularly.(max..50.assemblies).cleaned.and.checked.(for.checking.instructions.see.chapter.E).Worn.tools.can.cause.dangerous.assembly.failures.and.must.be.replaced.in.time..Average.tool.lifetime.is.approx..5000.cycles.when.properly.used..Maximum.lifetime.can.be.achieved.by.observing.the.following:

•.Regular.cleaning.and.checking•.Clean.and.corrosion-protected.storage•.Proper.de-burring.and.cleaning.of.tube.end•.Proper.tool.selection.and.operation•.Use.of.specified.lubricant

Flaring tools for machine: Parflare® HPF ��0

Machine, tooling and equipment

Parflare® HPF 120

Features, advantages and benefits of Parflare® HPF ��0

1. Cost saving – Compared.to.welding.or.brazing,.orbital.flar-ing.is.much.less.time.consuming..Special.tube.preparation.and.finishing.are.not.necessary..Flaring.uses.only.a.fraction.of.the.energy.needed.for.brazing.or.welding.

2. Zinc plated tubing – The.Parflare®.process.allows.the.use.of.zinc-plated.tubing..The.cost.for.cleaning.post.process,.or.paint-ing.can.be.saved..

. 3. Excellent sealing quality –.The.HPF.inserts.are.precisely.fitted.into.the.contour.of.the.tube.termination..Sealing.is.achieved.by.an.O-ring...

4. Process/Product concept – Parflare®.machines.are.espe-cially.designed.to.match.Parker.HPF.standards..Machine,.tools.and.products.are.fine-tuned.for.reliable.performance..

. 5. Workshop use – The.rigid.machine.design.allows.project.work.in.on-site.piping.workshops..

. 6. Short clamping length – Clamping.dies.for.HPF.flaring.are.optimised.for.minimum.straight.tube.length..

. 7. Easy to use – All.operational.devices.are.obvious.so.that.machine.operation.is.intuitive..Insertion.and.withdrawal.of.the.tube.ends.are.facilitated.by.the.two-part.clamping.jaws...

. 8. Quality – Consistent.quality.results.are.achieved.by..recommended.values.for.machine.setting..

. 9. Constant flare diameter – The.diameter.of.the.flare.is.given.by.the.tool.contour.and.the.tube.stop.adjustment...

.10. Flexible – Different.tube.material.and.quality.might.require.special.setting.of.tube.stop..For.best.results,.these.parameters.can.be.manually.adjusted.based.on.operators.experience.

11. Clean – The.Parflare®.process.is.environmentally.clean.and.safe..As.no.heat.or.chemicals.are.used,.hazards.from.fumes.or.heat.do.not.occur.

12. Perfect for on-site work – The.complete.WorkCentre.features.special.attachments.for.transportation.by.fork.lift.and.crane..Therefore.the.Parflare®.HPF.120.is.ideal.for.the.workshop.or.on-site.use..

.13. Ready to go – The.Parflare®.HPF.120.is.delivered.including..all.necessary.items.such.as.electric.plug,.operator.manual,.declaration.of.CE-conformity,.short.instruction.pictograms.on.machine.housing.and.dimensional.charts.for.tube.preparation..

Page 15: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Ordering information/Nomenclature

HPF – ISO 6164 Square flange

HPFC – Complete flange with metric thread holes incl. lockring

ISO 6164

Size

Tube

ODLK D1 D2 L1 LA

LX DB

Weight

(Steel)

kg/1 pieceOrder code

PN (bar)

3/4“25

50 32.5 42.1 22.050 35.4 9.0

0.25HPFC412-25

400

1“30

62 38.9 48.4 33.065 43.8 11.0

0.45HPFC416-30

400

1“38

62 38.9 48.4 32.065 43.8 11.0

0.40HPFC416-38

400

1 1/4“38

73 44.6 54.8 36.575 51.6 13.5

0.60HPFC420-38

400

1 1/4“42

73 44.6 54.8 37.575 51.6 13.5

0.56HPFC420-42

400

1 1/2“50

85 51.6 64.3 42.590 60.1 17.5

0.85HPFC424-50

400

2“50

98 67.6 80.2 40.0 100 69.3 17.51.55

HPFC432-50400

2 1/2“60

118 80.5 95.0 50.0 120 83.4 22.02.80

HPFC440-60400

2 1/2“65

118 80.5 95.0 50.0 120 83.4 22.02.50

HPFC440-65400

2 1/2“66

118 80.5 95.0 50.0 120 83.4 22.02.40

HPFC440-66400

2 1/2“75

118 80.5 95.0 55.0 120 83.4 22.02.50

HPFC440-75400

3“80

145 90.5 111.0 56.0 150 102.5 26.03.60

HPFC448-80400

3“88

145 90.5 111.0 56.0 150 102.5 26.03.40

HPFC448-88400

Machine, tooling and equipment

Page 16: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Ordering information / Nomenclature

Order code – HPF

ISO ����-�/SAE �000 System

Size TubeFlange with lockring Insert for F��

SealTube seal

O-ringPlain holes Threaded holes F�� Seal Flat version�/�“ ��x�.0 HPFC���-�� HPFCM���-�� IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.���/�“ ��x�.0 HPFC���-�� HPFCM���-�� IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.��

�“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.�0X�.���“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.�0X�.���“ ��x�.0 HPFC���-�� HPFCM���-�� IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.���” ��x�.0 HPFC���-�� HPFCM���-�� IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.��

� �/�“ ��x�.0 HPFC��0-�� HPFCM��0-�� IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC��0-�� HPFCM��0-�� IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC��0-�� HPFCM��0-�� IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC��0-�� HPFCM��0-�� IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.��� �/�“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.��� �/�“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.��� �/�“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.��

�“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.���“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.���“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.���“ �0x�.0 HPFC���-�0 HPFCM���-�0 IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.���“ ��x�.0 HPFC���-�� HPFCM���-�� IP���-��X�.0V IP���-��X�.0F F��S�� OR�0.0�X�.���“ ��x�.� HPFC���-�� HPFCM���-�� IP���-��X�.�V IP���-��X�.�F F��S�� OR�0.0�X�.��

ISO ����/Square flange System

Size TubeFlange with lockring Insert for F��

SealTube seal

O-ringPlain holes Threaded holes F�� Seal Flat version�/�“ ��x�.0 HPFC���-�� --- IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.���/�“ ��x�.0 HPFC���-�� --- IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.��

�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.�0X�.���“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.�0X�.���“ ��x�.0 HPFC���-�� --- IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.���” ��x�.0 HPFC���-�� --- IP���-��X�.0V IP���-��X�.0F F��S�� OR��.��X�.��

� �/�“ ��x�.0 HPFC��0-�� --- IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC��0-�� --- IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC��0-�� --- IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC��0-�� --- IP��0-��X�.0V IP��0-��X�.0F F��S�0 OR��.��X�.��� �/�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.��� �/�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.��� �/�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.��� �/�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.��

�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.���“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR�0.��X�.���“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.��

� �/�“ �0x�.0 HPFC���-�0 --- IP��0-�0X�.0V IP���-�0X�.0F F��S�0 OR��.��X�.��� �/�“ ��x�.0 HPFC���-�� --- IP��0-��X�.0V IP���-��X�.0F F��S�0 OR�0.0�X�.��� �/�“ ��x�.� HPFC���-�� --- IP��0-��X�.�V IP���-��X�.�F F��S�0 OR�0.0�X�.��� �/�“ ��x��.� HPFC��0-�� --- IP��0-��X��.�V IP��0-��X��.�F F��S�0 OR��.��X�.��

�“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.���“ �0x�.0 HPFC���-�0 --- IP���-�0X�.0V IP���-�0X�.0F F��S�� OR��.��X�.���“ �0x�0.0 HPFC���-�0 --- IP���-�0X�0.0V IP���-�0X�0.0F F��S�� OR��.��X�.���“ ��x��.0 HPFC���-�� --- IP���-��X��.0V IP���-��X��.0F F��S�� OR��.��X�.��

Ordering information / Nomenclature

Order code – HPF

Material and coating

CF Steel, Cr(VI)-freeSS Stainless steel

Sealing System

V F�� SealF Flat Face

Part CodeFlange FlangeType Code FootprintHPF 6 ISO ����-� (SAE�000)HPF 4 ISO ���� Square flange

Example: HPF6 20 -42x3.0 V CF

Series

8 12 16 20 24 32 40 48 64 80�/�" �/�" �" ��/�" ��/�" �" ��/�" �" �" �"

Pipe size

��x�.0 / Pipe O.D. x wall thickness (mm)

Ordering example for a tube-to-port flange connection:

Part code Component Qty. Code MaterialHPF��0-��X�.0VCF Flange � HPFC��0-��CFX Steel, Cr(VI)-freeTube to port Insert � IP�0-��X�.0VCFX Steel, Cr(VI)-free� ¼” �000psi Footprint F�� seal � F��S�0X P�00���X�.0 tube O-ring � OR��.��X�.�� NBR, �0° Shore

Bolts � ZYLS�0X���0� �0.�

Page 17: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

HPF – SAE 6000/ISO 6162-2

Ordering information / Nomenclature

Page 18: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – SAE 6000/ISO 6162-2

HPF – Tube-to-tube connection

Overview of tube-to-tube connection, Flanges with through boring, bolts and nuts

Example 38x4.0 in 1“: �x Flange connection complete with profile seal HPF���-��X�.0-V �x Flange connection complete flat version HPF���-��X�.0-F �x Bolts M��x��0 �x Nuts M��-�0

Flange connection 1 ISO 6162-2 with F37 profile seal

Flange connection consists of

Size

Tube

Flange connection complete

Insert�x

Flange incl.

lockring�x

Flange seal F�� sealing

ring�x

Tube seal

O-ring�x

Bolts �0.�

ISO �����x

Nut

ISO �0���x

�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x�0 M�0-�0�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x�0 M�0-�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M��x��0 M��-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M��x��0 M��-�0�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M��x��0 M��-�0�” ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M��x��0 M��-�0

� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x��0 M��-�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M�0x��0 M�0-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M�0x��0 M�0-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M�0x��0 M�0-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M�0x��0 M�0-�0�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR�0.0�X�.�� M�0x��0 M�0-�0�“ ��x�.� HPF���-��X�.�-V IP���-��X�.�V HPFC���-�� F��S�� OR�0.0�X�.�� M�0x��0 M�0-�0

Flange connection consists of

Size

Tube

Flange connectioncomplete

Insert�x

Flange incl. lockring �x

Tube seal

O-ring�x

�/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.���/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.��

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.���“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.���“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.��

� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.��

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.���“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR�0.0�X�.���“ ��x�.� HPF���-��X�.�-F IP���-��X�.�F HPFC���-�� OR�0.0�X�.��

Flange connection 2 ISO 6162-2 flat face

HPF – SAE 6000/ISO 6162-2

HPF – Tube-to-tube connection

Overview of tube-to-tube connection, � Flange with tapped holes, � Flange with through boring, bolts

Example 38x4.0 in 1“: �x Flange connection complete with profile seal HPF���-��x�.0-V �x Flange connection complete flat version HPFM���-��x�.0-F �x Nuts M��x�0

Flange connection 2 ISO 6162-2 flat version

Flange connection 1 ISO 6162-2 with F37 profile sealing

Flange connection consists of

Size

Tube

Flange connectioncomplete

Insert�x

Flange �x

Flange seal F�� sealing

ring�x

Tube seal

O-ring�x

Nuts �0.�

ISO ���� �x

�/�“ ��x�.0 HPF���-��x�.0-V IP���-��x�.0V HPFC���-�� F��S�� OR��.��x�.�� M�0x�0�/�“ ��x�.0 HPF���-��x�.0-V IP���-��x�.0V HPFC���-�� F��S�� OR��.��x�.�� M�0x�0

�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR��.�0x�.�� M��x�0�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR��.�0x�.�� M��x�0�“ ��x�.0 HPF���-��x�.0-V IP���-��x�.0V HPFC���-�� F��S�� OR��.��x�.�� M��x�0�“ ��x�.0 HPF���-��x�.0-V IP���-��x�.0V HPFC���-�� F��S�� OR��.��x�.�� M��x�0�” ��x�.0 HPF���-��x�.0-V IP���-��x�.0V HPFC���-�� F��S�� OR��.��x�.�� M��x�0

� �/�“ ��x�.0 HPF��0-��x�.0-V IP��0-��x�.0V HPFC��0-�� F��S�0 OR��.��x�.�� M��x�00� �/�“ ��x�.0 HPF��0-��x�.0-V IP��0-��x�.0V HPFC��0-�� F��S�0 OR��.��x�.�� M��x�00� �/�“ ��x�.0 HPF��0-��x�.0-V IP��0-��x�.0V HPFC��0-�� F��S�0 OR��.��x�.�� M��x�00� �/�“ ��x�.0 HPF��0-��x�.0-V IP��0-��x�.0V HPFC��0-�� F��S�0 OR��.��x�.�� M��x�00� �/�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR�0.��x�.�� M��x��0� �/�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR�0.��x�.�� M��x��0� �/�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR�0.��x�.�� M��x��0� �/�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR��.��x�.�� M��x��0

�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR�0.��x�.�� M�0x��0�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR�0.��x�.�� M�0x��0�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR��.��x�.�� M�0x��0�“ �0x�.0 HPF���-�0x�.0-V IP���-�0x�.0V HPFC���-�0 F��S�� OR��.��x�.�� M�0x��0�“ ��x�.0 HPF���-��x�.0-V IP���-��x�.0V HPFC���-�� F��S�� OR�0.0�x�.�� M�0x��0�“ ��x�.� HPF���-��x�.�-V IP���-��x�.�V HPFC���-�� F��S�� OR�0.0�x�.�� M�0x��0

Flange connection consists of

Size

Tube

Flange connection

complete

Insert

�x

Flange incl. lockring

�x

Tube seal O-ring

�x

�/�“ ��x�.0 HPFM���-��x�.0-F IP���-��x�.0F HPFCM���-�� OR��.��x�.���/�“ ��x�.0 HPFM���-��x�.0-F IP���-��x�.0F HPFCM���-�� OR��.��x�.��

�“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR��.�0x�.���“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR��.�0x�.���“ ��x�.0 HPFM���-��x�.0-F IP���-��x�.0F HPFCM���-�� OR��.��x�.���“ ��x�.0 HPFM���-��x�.0-F IP���-��x�.0F HPFCM���-�� OR��.��x�.���” ��x�.0 HPFM���-��x�.0-F IP���-��x�.0F HPFCM���-�� OR��.��x�.��

� �/�“ ��x�.0 HPFM��0-��x�.0-F IP��0-��x�.0F HPFCM��0-�� OR��.��x�.��� �/�“ ��x�.0 HPFM��0-��x�.0-F IP��0-��x�.0F HPFCM��0-�� OR��.��x�.��� �/�“ ��x�.0 HPFM��0-��x�.0-F IP��0-��x�.0F HPFCM��0-�� OR��.��x�.��� �/�“ ��x�.0 HPFM��0-��x�.0-F IP��0-��x�.0F HPFCM��0-�� OR��.��x�.��� �/�“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR�0.��x�.��� �/�“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR�0.��x�.��� �/�“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR�0.��x�.��� �/�“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR��.��x�.��

�“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR�0.��x�.���“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR�0.��x�.���“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR��.��x�.���“ �0x�.0 HPFM���-�0x�.0-F IP���-�0x�.0F HPFCM���-�0 OR��.��x�.���“ ��x�.0 HPFM���-��x�.0-F IP���-��x�.0F HPFCM���-�� OR�0.0�x�.���“ ��x�.� HPFM���-��x�.�-F IP���-��x�.�F HPFCM���-�� OR�0.0�x�.��

Page 19: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – SAE 6000/ISO 6162-2

HPF – Tube-to-port connection

Overview tube-to-port connection with profile seal

Example 38x4.0 in 1“: �x Flange connection complete with profile seal HPF���-��X�.0-V �x Bolts M��x�0

ISO 6162-2 with F37 profile seal

Flange connection consists of

Size

Tube

Flange connection complete

Insert�x

Flange incl.

lockring�x

Flange seal F�� sealing

ring�x

Tube seal

O-ring�x

Bolts �0.�

ISO �����x

�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x�0�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M��x�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M��x�0�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M��x�0�” ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M��x�0

� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M�0x�00�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M�0x�00�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M�0x�00�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M�0x�00�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR�0.0�X�.�� M�0x�00�“ ��x�.� HPF���-��X�.�-V IP���-��X�.�V HPFC���-�� F��S�� OR�0.0�X�.�� M�0x�00

Flange connection consists of

Size

Tube

Flange connection complete

Insert�x

Flange incl.

lockring �x

Tube seal

O-ring �x

Bolts �0.�

ISO �����x

�/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M�0x�0�/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M�0x�0

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.�� M��x�0�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.�� M��x�0�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M��x�0�” ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M��x�0

� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x�0

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M�0x�00�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M�0x�00�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M�0x�00�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M�0x�00�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR�0.0�X�.�� M�0x�00�“ ��x�.� HPF���-��X�.�-F IP���-��X�.�F HPFC���-�� OR�0.0�X�.�� M�0x�00

Overview of tube-to-port connector with flat sealExample 38x4.0 in 1“: �x Flange connection complete with flat seal HPF���-��X�.0-F �x Bolts M��x�0

ISO 6162-2 flat face

HPF – SAE 6000/ISO 6162-2

HPFC – Full flange incl. lockring

SizeTube OD D� L� L� LA LB LX LY DB

Weight(Steel)

kg/� piece Order code PN (bar)�/�“ �� ��.� �� �� �0 ��.� ��.� �0.� �0.� 0.� HPFC612-25 ��0

�“ �0 ��.� �� �� �0 ��.0 ��.� ��.� ��.0 0.� HPFC616-30 ��0�“ �� ��.� �� �� �0 ��.0 ��.� ��.� ��.0 0.� HPFC616-38 ��0

� �/�“ �� ��.� �� �� �� ��.0 ��.� ��.� ��.0 0.� HPFC620-38 ��0� �/�“ �� ��.� �� �� �� ��.0 ��.� ��.� ��.0 0.� HPFC620-42 ��0� �/�“ �0 �0.� �� �0 �� ���.0 ��.� ��.� ��.0 �.� HPFC624-50 ��0

�“ �0 �0.� �� �� ��� ���.0 ��.� ��.� ��.0 �.� HPFC632-50 ��0�“ �0 �0.� �� �� ��� ���.0 ��.� ��.� ��.0 �.� HPFC632-60 ��0�“ �� ��.� �� �� ��� ���.0 ��.� ��.� ��.0 �.� HPFC632-65 ��0�“ �� ��.� �� �� ��� ���.0 ��.� ��.� ��.0 �.� HPFC632-66 ��0

ISO ����-�

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, zinc plated, Cr(VI)-free CF HPFC���-�0CF

Stainless steel SS HPFC���-�0SS

Page 20: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – SAE 6000/ISO 6162-2

HPFC – Complete flange with metric thread holes incl. lockring

ISO ����-�

SizeTube OD D� L� L� LA LB LX LY M

Weight(Steel)

kg/� piece Order code PN (bar)�/�“ �� ��.� �� �� �0 ��.� ��.� �0.� M�0 0.� HPFCM612-25 ��0

�“ �0 ��.� �� �� �0 ��.0 ��.� ��.� M�� 0.� HPFCM616-30 ��0�“ �� ��.� �� �� �0 ��.0 ��.� ��.� M�� 0.� HPFCM616-38 ��0

� �/�“ �� ��.� �� �� �� ��.0 ��.� ��.� M�� 0.� HPFCM620-38 ��0� �/�“ �� ��.� �� �� �� ��.0 ��.� ��.� M�� 0.� HPFCM620-42 ��0� �/�“ �0 �0.� �� �0 �� ���.0 ��.� ��.� M�� �.� HPFCM624-50 ��0

�“ �0 �0.� �� �� ��� ���.0 ��.� ��.� M�0 �.� HPFCM632-50 ��0�“ �0 �0.� �� �� ��� ���.0 ��.� ��.� M�0 �.� HPFCM632-60 ��0�“ �� ��.� �� �� ��� ���.0 ��.� ��.� M�0 �.� HPFCM632-65 ��0�“ �� ��.� �� �� ��� ���.0 ��.� ��.� M�0 �.� HPFCM632-66 ��0

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, zinc plated, Cr(VI)-free CF HPFCM���-�0CF

Stainless steel SS HPFCM���-�0SS

HPF – SAE 6000/ISO 6162-2

IPV - Insert with F37 profile seal

ISO ����-�

Size Tube D� D� D� L�

Weight (Steel)

kg/� piece O-Ring F�� SealInsert

(incl. seals)�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V

�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR��.�0X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.�0X�.�� F��S�� IP���-�0X�.0V�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V

� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �0 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V� �/�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V� �/�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V

�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR�0.0�X�.�� F��S�� IP���-��X�.0V�“ ��x�.� ��.� ��.� ��.� �� 0.�� OR�0.0�X�.�� F��S�� IP���-��X�.�V

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, phosphated PHR IP��-�0X�.0VPHR

Steel, zinc plated, Cr(VI)-free CF IP��-�0X�.0VCF

Stainless steel SS IP��-�0X�.0VSS

Page 21: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – SAE 6000/ISO 6162-2

IPF – Flat face insert

ISO ����-�

Size Tube D� D� D� L�

Weight (Steel)

kg/� piece O-ringInsert

(incl. O-ring)�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F

�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR��.�0X�.�� IP���-�0X�.0F�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.�0X�.�� IP���-�0X�.0F�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F

� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �0 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR�0.��X�.�� IP���-�0X�.0F� �/�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR�0.��X�.�� IP���-�0X�.0F� �/�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F

�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR�0.��X�.�� IP���-�0X�.0F�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR�0.��X�.�� IP���-�0X�.0F�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR�0.0�X�.�� IP���-��X�.0F�“ ��x�.� ��.� ��.� ��.� �� 0.�� OR�0.0�X�.�� IP���-��X�.�F

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, phosphated PHR IP��-�0X�.0FPHR

Steel, zinc plated, Cr(VI)-free CF IP��-�0X�.0FCF

Stainless steel SS IP��-�0X�.0FSS

HPF – SAE 6000/ISO 6162-2

F37 Profile seal

ISO ����-�

Size

O-ring

DescriptionOrder code

P�00��/�“ F��S�� F37S12X

�“ F��S�� F37S16X� �/�“ F��S�0 F37S20X� �/�“ F��S�� F37S24X

�“ F��S�� F37S32X

O-ring seal

ISO ����-�

Size

O-ringOrder code

Description NBR FKM�/�“ OR��X�.�� OR25X3.53X OR25X3.53VITX

�“ OR��.��X�.�� OR32.92X3.53X OR32.92X3.53VITX� �/�“ OR��.��X�.�� OR37.69X3.53X OR37.69X3.53VITX� �/�“ OR��.��X�.�� OR47.22X3.53X OR47.22X3.53VITX

�“ OR��.��X�.�� OR56.75X3.53X OR56.75X3.53VITX

Page 22: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

HPF – SAE 6000/ISO 6162-2

LB − Flange L-block

ISO ����-�

HPF – SAE 6000/ISO 6162-2

LBR − Flange L-block reducer

ISO ����-�

Size Inch D� L� L� L� L�0 L� L� T�

Weight(Steel)

kg/� piece Order code�“ �� �0 �0 �� �� ��.� ��.� M�� �.� LB616CFX

� �/�“ �0 �0 �� �� �� ��.� ��.� M�� �.� LB620CFX� �/�“ �� �00 �00 �� �� ��.� ��.� M�� �.� LB624CFX

�“ �0 ��� ��� �� �� ��.� ��.� M�0 �.� LB632CFX

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF LB��0CFX only flange block

Steel, oil dipped S LB��0SX only flange block

Stainless steel SS LB��0SSX only flange block

Please change suffixes according to material/surface required

Size Inch D� D� L� L� L� L�0 L� L� L� L� T� T�

Weight(Steel)

kg/� piece Order code

� �/� - �“ �0 �� �0 �� �� �� ��.� ��.� ��.� ��.� M�� M�� �.� LBR620-616CFX� �/� - �“ �� �� �00 �00 �� �� ��.� ��.� ��.� ��.� M�� M�� �.� LBR624-616CFX

� �/� - � �/�“ �� �0 �00 �00 �� �� ��.� ��.� ��.� ��.� M�� M�� �.� LBR624-620CFX� - �“ �0 �� ��� ��� �� �� ��.� ��.� ��.� ��.� M�0 M�� �.� LBR632-616CFX

� - � �/�“ �0 �0 ��� ��� �� �� ��.� ��.� ��.� ��.� M�0 M�� �.� LBR632-620CFX� - � �/�“ �0 �� ��� ��� �� �� ��.� ��.� ��.� ��.� M�0 M�� �.� LBR632-624CFX

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF LBR��0-���CFX only flange block

Steel, oil dipped S LBR��0-���SX only flange block

Stainless steel SS LBR��0-���SSX only flange block

Please change suffixes according to material/surface required

Page 23: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – SAE 6000/ISO 6162-2

TB − Flange T-block

ISO ����-�

HPF – SAE 6000/ISO 6162-2

TBR − Flange T-block reducer

ISO ����-�

Size Inch D� L� L� L� L�0 L� L� T�

Weight(Steel)

kg/� piece Order code�“ �� �0 �0 �� �� ��.� ��.� M�� �.� TB616TFX

� �/�“ �0 �0 �� �� �� ��.� ��.� M�� �.0 TB620TFX� �/�“ �� �00 �00 �� �� ��.� ��.� M�� �.� TB624TFX

�“ �0 ��� ��� �� �� ��.� ��.� M�0 �.0 TB632TFX

A B CTBR620-616-620 � �/�“ �“ � �/�“TBR620-620-616 � �/�“ � �/�“ �“TBR616-620-620 �“ � �/�“ � �/�“

Size Inch D� D� L� L� L� L�0 L� L� L� L� T� T�

Weight(Steel)

kg/� piece Order code

� �/� - � - � �/�“ �0 �� �0 �� �� �� ��.� ��.� ��.� ��.� M�� M�� �.� TBR620-616-620CFX� �/� - � �/� - � �/�“ �� �0 �00 �00 �� �� ��.� ��.� ��.� ��.� M�� M�� �.� TBR624-620-624CFX

� �/� - � - � �/�“ �� �� �00 �00 �� �� ��.� ��.� ��.� ��.� M�� M�� �.� TBR624-616-624CFX� - � �/� - �“ �0 �� ��� ��� �� �� ��.� ��.� ��.� ��.� M�0 M�� �.� TBR632-624-632CFX� - � �/� - �“ �0 �0 ��� ��� �� �� ��.� ��.� ��.� ��.� M�0 M�� �.� TBR632-620-632CFX

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF TB��0CFX only flange block

Steel, oil dipped S TB��0SX only flange block

Stainless steel SS TB��0SSX only flange block

Please change suffixes according to material/surface required

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF TBR��0-���-��0CFX only flange block

Steel, oil dipped S TBR��0-���-��0SX only flange block

Stainless steel SS TBR��0-���-��0SSX only flange block

Please change suffixes according to material/surface required

Page 24: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – SAE 6000/ISO 6162-2

Bolts and nuts

ISO ����-�

Size Tube

BoltISO ���� �0.�

Tube/Port

Tube/Tube (HPFCM Flange with Thread bore)

Description Order code Description Order code�/�“ ��x�.0 M�0x�0 ZYLS10X50109X M�0x�0 ZYLS10X70109X�/�“ ��x�.0 M�0x�0 ZYLS10X50109X M�0x�0 ZYLS10X70109X

�“ �0x�.0 M��x�0 ZYLS12X60109X M�0x�0 ZYLS12X90109X�“ �0x�.0 M��x�0 ZYLS12X60109X M�0x�0 ZYLS12X90109X�“ ��x�.0 M��x�0 ZYLS12X60109X M��x�0 ZYLS12X90109X�” ��x�.0 M��x�0 ZYLS12X60109X M��x�0 ZYLS12X90109X

� �/�“ ��x�.0 M��x�0 ZYLS14X70109X M��x�00 ZYLS14X100109X� �/�“ ��x�.0 M��x�0 ZYLS14X70109X M��x�00 ZYLS14X100109X� �/�“ ��x�.0 M��x�0 ZYLS14X70109X M��x�00 ZYLS14X100109X� �/�“ ��x�.0 M��x�0 ZYLS14X70109X M��x�00 ZYLS14X100109X� �/�“ �0x�.0 M��x�0 ZYLS16X80109X M��x��0 ZYLS16X130109X� �/�“ �0x�.0 M��x�0 ZYLS16X80109X M��x��0 ZYLS16X130109X� �/�“ �0x�.0 M��x�0 ZYLS16X80109X M��x��0 ZYLS16X130109X� �/�“ �0x�.0 M��x�0 ZYLS16X80109X M��x��0 ZYLS16X130109X

�“ �0x�.0 M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X140109X�“ �0x�.0 M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X140109X�“ �0x�.0 M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X140109X�“ ��x�.0 M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X140109X�“ ��x�.� M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X140109X

Size Tube

Bolt ISO ���� �0.�Tube/Tube

(HPFC Flange with Through bore) Nut

ISO �0��Description Order code Description Order code

�/�“ ��x�.0 M�0x�0 ZYLS10X90109X M�0 ISO4032-M-10-10�/�“ ��x�.0 M�0x�0 ZYLS10X90109X M�0 ISO4032-M-10-10

�“ �0x�.0 M��x��0 ZYLS12X110109X M�� ISO4032-M-12-10�“ �0x�.0 M��x��0 ZYLS12X110109X M�� ISO4032-M-12-10�“ ��x�.0 M��x��0 ZYLS12X110109X M�� ISO4032-M-12-10�” ��x�.0 M��x��0 ZYLS12X110109X M�� ISO4032-M-12-10

� �/�“ ��x�.0 M��x��0 ZYLS14X120109X M�� ISO4032-M-14-10� �/�“ ��x�.0 M��x��0 ZYLS14X120109X M�� ISO4032-M-14-10� �/�“ ��x�.0 M��x��0 ZYLS14X120109X M�� ISO4032-M-14-10� �/�“ ��x�.0 M��x��0 ZYLS14X120109X M�� ISO4032-M-14-10� �/�“ �0x�.0 M��x��0 ZYLS16X150109X M�� ISO4032-M-16-10� �/�“ �0x�.0 M��x��0 ZYLS16X150109X M�� ISO4032-M-16-10� �/�“ �0x�.0 M��x��0 ZYLS16X150109X M�� ISO4032-M-16-10� �/�“ �0x�.0 M��x��0 ZYLS16X150109X M�� ISO4032-M-16-10

�“ �0x�.0 M�0x��0 ZYLS20X160109X M�0 ISO4032-M-20-10�“ �0x�.0 M�0x��0 ZYLS20X160109X M�0 ISO4032-M-20-10�“ �0x�.0 M�0x��0 ZYLS20X160109X M�0 ISO4032-M-20-10�“ ��x�.0 M�0x��0 ZYLS20X160109X M�0 ISO4032-M-20-10�“ ��x�.� M�0x��0 ZYLS20X160109X M�0 ISO4032-M-20-10

Check torque details (see page ��)

HPF – ISO 6164 Square flange

Page 25: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – ISO 6164 Square flange

Flange connection consists of

Size TubeFlange connection

completeInsert

�x

Flangeincl. lockring

�x

tube sealO-ring

�x�/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.���/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.��

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.���“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.���” ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.��

� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.��� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.��

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.��

� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.��� �/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR�0.0�X�.��� �/�“ ��x�.� HPF���-��X�.�-F IP���-��X�.�F HPFC���-�� OR�0.0�X�.��� �/�“ ��x��.� HPF��0-��X��.�-F IP��0-��X��.�F HPFC��0-�� OR�0.0�X�.��

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.���“ �0x�0.0 HPF���-�0X�0.0-F IP���-�0X�0.0F HPFC���-�0 OR��.��X�.���“ ��x��.0 HPF���-��X��.0-F IP���-��X��.0F HPFC���-�� OR��.��X�.��

HPF – Tube-to-tube connection (Continued)

Overview tube-to-tube connection, flat face

Example 38x4.0 in 1“: �x Flange connection complete with profile seal HPF���-��X�.0-V �x Flange connection complete flat face HPF���-��X�.0-F �x Bolts M�0x��0 �x Nuts M�0-�0

Flange connection 2 ISO 6164 flat

HPF – ISO 6164 Square flange

HPF – Tube-to-tube connection

Overview Tube to tube connection

Example 38x4.0 in 1“: �x Flange connection complete with profile seal HPF���-��X�.0-V �x Flange connection complete flat version HPF���-��X�.0-F �x Bolts M�0x��0 �x Nuts M�0-�0

Flange connection consists of

Size TubeFlange connection

completeInsert

�x

Flange incl. lockring

�x

Flange sealF�� sealing

ring�x

Tube sealO-ring

�x

Bolts �0.�

ISO �����x

NutISO �0��

�x�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�x�00 M�-�0�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�x�00 M�-�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M�0x��0 M�0-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M�0x��0 M�0-�0�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x��0 M�0-�0�” ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x��0 M�0-�0

� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x��0 M��-�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x��0 M��-�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x��0 M��-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x��0 M��-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x��0 M��-�0

� �/�“ �0x�.0 HPF��0-�0X�.0-V IP��0-�0X�.0V HPFC��0-�0 F��S��0 OR��.��X�.�� M�0x��0 M�0-�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S��0 OR�0.0�X�.�� M�0x��0 M�0-�0� �/�“ ��x�.� HPF��0-��X�.�-V IP��0-��X�.�V HPFC��0-�� F��S��0 OR�0.0�X�.�� M�0x��0 M�0-�0� �/�“ ��x��.� HPF��0-��X��.�-V IP��0-��X��.�V HPFC��0-�� F��S��0 OR�0.0�X�.�� M�0x��0 M�0-�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S��� OR��.��X�.�� M��x�00 M��-�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S��� OR��.��X�.�� M��x�00 M��-�0�“ �0x�0.0 HPF���-�0X�0.0-V IP���-�0X�0.0V HPFC���-�0 F��S��� OR��.��X�.�� M��x�00 M��-�0�“ ��x��.0 HPF���-��X��.0-V IP���-��X��.0V HPFC���-�� F��S��� OR��.��X�.�� M��x�00 M��-�0

Flange connection 1 ISO 6164 with F37 profile seal

Flange connection � see next page.

Page 26: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – ISO 6164 Square flange

Flange connection consists of

Size Tube Flange completeInner part

�x

Flange incl. lockring

�x

tube sealO-ring

�x

Bolts �0.�

ISO �����x

�/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M�x�0�/�“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M�x�0

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.�� M�0x���“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.�0X�.�� M�0x���“ ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M�0x���” ��x�.0 HPF���-��X�.0-F IP���-��X�.0F HPFC���-�� OR��.��X�.�� M�0x��

� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x�0

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M��x�0�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR�0.��X�.�� M��x�0�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x�0

� �/�“ �0x�.0 HPF��0-�0X�.0-F IP��0-�0X�.0F HPFC��0-�0 OR��.��X�.�� M�0x�00� �/�“ ��x�.0 HPF��0-��X�.0-F IP��0-��X�.0F HPFC��0-�� OR�0.0�X�.�� M�0x�00� �/�“ ��x�.� HPF��0-��X�.�-F IP��0-��X�.�F HPFC��0-�� OR�0.0�X�.�� M�0x�00� �/�“ ��x��.� HPF��0-��X��.�-F IP��0-��X��.�F HPFC��0-�� OR�0.0�X�.�� M�0x�00

�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x��0�“ �0x�.0 HPF���-�0X�.0-F IP���-�0X�.0F HPFC���-�0 OR��.��X�.�� M��x��0�“ �0x�0.0 HPF���-�0X�0.0-F IP���-�0X�0.0F HPFC���-�0 OR��.��X�.�� M��x��0�“ ��x��.0 HPF���-��X��.0-F IP���-��X��.0F HPFC���-�� OR��.��X�.�� M��x��0

HPF – Tube-to-port connection

Overview tube-to-port connecton, flat face

Example 38x4.0 in 1“: �x Flange connection complete, flat face HPF���-��X�.0-F �x Bolts M�0x��

ISO 6164 Flange flat

HPF – ISO 6164 Square flange

HPF – Tube-to-port connection

Overview tube-to-port connection with profile seal

Example 38x4.0 in 1“: �x Flange connection complete with profile seal HPF���-��X�.0-V �x Bolts M�0x��

ISO 6164 Flange with F37 profile seal:

Flange connection consists of

Size TubeFlange connection

completeInsert

�x

Flange incl. lockring

�x

Flange sealF�� lockring

�x

Tube sealO-ring

�x

Bolts �0.�

ISO �����x

�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�x�0�/�“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�x�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M�0x���“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.�0X�.�� M�0x���“ ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x���” ��x�.0 HPF���-��X�.0-V IP���-��X�.0V HPFC���-�� F��S�� OR��.��X�.�� M�0x��

� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S�0 OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x�0� �/�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x�0

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR�0.��X�.�� M��x�0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S�� OR��.��X�.�� M��x�0

� �/�“ �0x�.0 HPF��0-�0X�.0-V IP��0-�0X�.0V HPFC��0-�0 F��S��0 OR��.��X�.�� M�0x�00� �/�“ ��x�.0 HPF��0-��X�.0-V IP��0-��X�.0V HPFC��0-�� F��S��0 OR�0.0�X�.�� M�0x�00� �/�“ ��x�.� HPF��0-��X�.�-V IP��0-��X�.�V HPFC��0-�� F��S��0 OR�0.0�X�.�� M�0x�00� �/�“ ��x��.� HPF��0-��X��.�-V IP��0-��X��.�V HPFC��0-�� F��S��0 OR�0.0�X�.�� M�0x�00

�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S��� OR��.��X�.�� M��x��0�“ �0x�.0 HPF���-�0X�.0-V IP���-�0X�.0V HPFC���-�0 F��S��� OR��.��X�.�� M��x��0�“ �0x�0.0 HPF���-�0X�0.0-V IP���-�0X�0.0V HPFC���-�0 F��S��� OR��.��X�.�� M��x��0�“ ��x��.0 HPF���-��X��.0-V IP���-��X��.0V HPFC���-�� F��S��� OR��.��X�.�� M��x��0

Page 27: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

HPF – ISO 6164 Square flange

IPV – Insert with F37 profile seal

ISO ����

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, phosphated PHR IP���-�0X�.0VPHR

Steel, zinc plated, Cr(VI)-free CF IP���-�0X�.0VCF

Stainless steel SS IP���-�0X�.0VSS

Size Tube D� D� D� L�

Weight(Steel)

kg/� piece O-Ring F�� SealInsert

(incl. seals)�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V

�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR��.�0X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.�0X�.�� F��S�� IP���-�0X�.0V�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V�” ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-��X�.0V

� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �0 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S�0 IP��0-��X�.0V� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V� �/�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V� �/�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V

�“ �0x�.0 ��.� ��.� ��.� �� 0.�0 OR�0.��X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR�0.��X�.�� F��S�� IP���-�0X�.0V�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� F��S�� IP���-�0X�.0V

� �/�“ �0x�.0 �0.� ��.� ��.0 �� 0.�� OR��.��X�.�� F��S��0 IP��0-�0X�.0V� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR�0.0�X�.�� F��S��0 IP��0-��X�.0V� �/�“ ��x�.� ��.� ��.� ��.0 �� 0.�� OR�0.0�X�.�� F��S��0 IP��0-��X�.�V� �/�“ ��x��.� ��.� ��.� ��.0 �� 0.�� OR�0.0�X�.�� F��S��0 IP��0-��X��.�V

�“ �0x�.0 ��.0 ��.� �0�.0 �� 0.�� OR��.��X�.�� F��S��� IP���-�0X�.0V�“ �0x�.0 �0.� ��.� �0�.0 �� 0.�� OR��.��X�.�� F��S��� IP���-�0X�.0V�“ �0x�0.0 ��.� ��.� �0�.0 �� 0.�� OR��.��X�.�� F��S��� IP���-�0X�0.0V�“ ��x��.0 ��.� ��.� �0�.0 �� 0.�� OR��.��X�.�� F��S��� IP���-��X��.0V

HPF – ISO 6164 Square flange

HPFC – Complete flange with metric thread holes incl. lockring

ISO ����

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, phosphated PHR HPFC���-�0PHR

Stainless steel SS HPFC���-�0SS

SizeTube OD LK D� D� L� LA LX DB

Weight(Steel)

kg/� piece Order code PN (bar)�/�“ �� �0 ��.� ��.� ��.0 �0 ��.� �.0 0.�� HPFC412-25 �00

�“ �0 �� ��.� ��.� ��.0 �� ��.� ��.0 0.�� HPFC416-30 �00�“ �� �� ��.� ��.� ��.0 �� ��.� ��.0 0.�0 HPFC416-38 �00

� �/�“ �� �� ��.� ��.� ��.� �� ��.� ��.� 0.�0 HPFC420-38 �00� �/�“ �� �� ��.� ��.� ��.� �� ��.� ��.� 0.�� HPFC420-42 �00� �/�“ �0 �� ��.� ��.� ��.� �0 �0.� ��.� 0.�� HPFC424-50 �00

�“ �0 �� ��.� �0.� �0.0 �00 ��.� ��.� �.�� HPFC432-50 �00� �/�“ �0 ��� �0.� ��.0 �0.0 ��0 ��.� ��.0 �.�0 HPFC440-60 �00� �/�“ �� ��� �0.� ��.0 �0.0 ��0 ��.� ��.0 �.�0 HPFC440-65 �00� �/�“ �� ��� �0.� ��.0 �0.0 ��0 ��.� ��.0 �.�0 HPFC440-66 �00� �/�“ �� ��� �0.� ��.0 ��.0 ��0 ��.� ��.0 �.�0 HPFC440-75 �00

�“ �0 ��� �0.� ���.0 ��.0 ��0 �0�.� ��.0 �.�0 HPFC448-80 �00�“ �� ��� �0.� ���.0 ��.0 ��0 �0�.� ��.0 �.�0 HPFC448-88 �00

Page 28: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – ISO 6164 Square flange

F37 Profile seal

ISO ����

Size

O-Ring

DescriptionOrder code

P�00��/�“ F��S�� F37S12X

�“ F��S�� F37S16X� �/�“ F��S�0 F37S20X� �/�“ F��S�� F37S24X

�“ F��S�� F37S432X� �/�“ F��S��0 F37S440X

�“ F��S��� F37S448X

O-ring seal

ISO ����

Size

O-RingOrder code

Description NBR FKM�/�“ OR��X�.�� OR25X3.53X OR25X3.53VITX

�“ OR��.��X�.�� OR32.92X3.53X OR32.92X3.53VITX� �/�“ OR��.��X�.�� OR37.69X3.53X OR37.69X3.53VITX� �/�“ OR��.��X�.�� OR47.22X3.53X OR47.22X3.53VITX

�“ OR��.��X�.�� OR56.75X3.53X OR56.75X3.53VITX� �/�“ OR��.��X�.�� OR69.22X5.33X OR69.22X5.33VITX

�“ OR��.��X�.�� OR75.57X5.33X OR75.57X5.33VITX

HPF – ISO 6164 Square flange

IPF – Flat face insert

ISO ����

Please add the suffixes below according to the material required

Material Suffix surface and material

Example

Steel, phosphated PHR IP���-�0X�.0FPHR

Steel, zinc plated, Cr(VI)-free CF IP���-�0X�.0FCF

Stainless steel SS IP���-�0X�.0FSS

Size Tube D� D� D� L�

Weight (Steel)

kg/� piece O-ringInsert

(incl. O-ring)�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F�/�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F

�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR��.�0X�.�� IP���-�0X�.0F�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.�0X�.�� IP���-�0X�.0F�“ ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F�” ��x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-��X�.0F

� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �0 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-��X�.0F� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR�0.��X�.�� IP���-�0X�.0F� �/�“ �0x�.0 ��.� ��.� ��.� �0 0.�� OR�0.��X�.�� IP���-�0X�.0F� �/�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F� �/�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F

�“ �0x�.0 ��.� ��.� ��.� �� 0.�0 OR�0.��X�.�� IP���-�0X�.0F�“ �0x�.0 ��.� ��.� ��.� �� 0.�� OR�0.��X�.�� IP���-�0X�.0F�“ �0x�.0 �0.� ��.� ��.� �� 0.�� OR��.��X�.�� IP���-�0X�.0F

� �/�“ �0x�.0 �0.� ��.� ��.0 �� 0.�� OR��.��X�.�� IP��0-�0X�.0F� �/�“ ��x�.0 ��.� ��.� ��.0 �� 0.�� OR�0.0�X�.�� IP��0-��X�.0F� �/�“ ��x�.� ��.� ��.� ��.0 �� 0.�� OR�0.0�X�.�� IP��0-��X�.�F� �/�“ ��x��.� ��.� ��.� ��.0 �� 0.�� OR�0.0�X�.�� IP��0-��X��.�F

�“ �0x�.0 ��.0 ��.� �0�.0 �� 0.�� OR��.��X�.�� IP���-�0X�.0F�“ �0x�.0 �0.� ��.� �0�.0 �� 0.�� OR��.��X�.�� IP���-�0X�.0F�“ �0x�0.0 ��.� ��.� �0�.0 �� 0.�� OR��.��X�.�� IP���-�0X�0.0F�“ ��x��.0 ��.� ��.� �0�.0 �� 0.�� OR��.��X�.�� IP���-��X��.0F

Page 29: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – ISO 6164 Square flange

TB − Flange T-block

ISO ����

HPF – ISO 6164 Square flange

LB − Flange L-block

ISO ����

SizeInch D� L� L� L� L�0 L� L� T�

Weight(Steel)

kg/� piece Order code�“ �� �00 ��0 �00 �0 ��.� ��.� M�� �.�� LB432CFX

� �/�“ �0 ��0 ��0 ��0 �00 ��.� ��.� M�0 ��.�0 LB440CFX�“ �� ��0 �00 ��0 ��� �0�.� �0�.� M�� ��.�0 LB448CFX�“ �� ��0 ��0 ��0 ��0 ���.� ���.� M�0 ��.�0 LB464CFX

SizeInch D� L� L� L� L�0 L� L� T�

Weight(Steel)

kg/� piece Order code�“ �� �00 ��0 �00 �0 ��.� ��.� M�� �.0� TB432CFX

� �/�“ �0 ��0 ��0 ��0 �00 ��.� ��.� M�0 ��.�0 TB440CFX�“ �� ��0 �00 ��0 ��� �0�.� �0�.� M�� ��.�0 TB448CFX�“ �� ��0 ��0 ��0 ��� ���.� ���.� M�0 �0.�0 TB464CFX

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF LB���CFX

Steel, oil dipped S LB���SX

Stainless steel SS LB���SSX

Please change suffixes according to material/surface required

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF TB���CFX

Steel, oil dipped S TB���SX

Stainless steel SS TB���SSX

Please change suffixes according to material/surface required

Page 30: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

HPF – ISO 6164 Square flangeHPF – ISO 6164 Square flange

TBR − Flange T-block reducer

ISO ����

Size Inch D� D� L� L� L� L�0 L� L� L� L� T� T�

Weight(Steel)

kg/� piece Order code

� �/� - �“ �0 �� ��0 ��0 �00 �0 ��.� ��.� ��.� ��.� M�0 M�� �0.� TBR440-432-440CFX� - � �/�“ �� �0 ��0 ��� ��0 ��0 �0�.� �0�.� ��.� ��.� M�� M�0 ��.� TBR448-440-448CFX

� - �“ �� �� ��0 ��� �00 �00 �0�.� �0�.� ��.� ��.� M�� M�� ��.� TBR448-432-448CFX� - �“ �� �� ��0 ��� ��0 ��� ���.� ���.� �0�.� �0�.� M�0 M�� ��.� TBR464-448-464CFX

� - � �/�“ �� �0 ��0 ��� ��0 ��� ���.� ���.� ��.� ��.� M�0 M�0 ��.� TBR464-440-464CFX� - �“ �� �� ��0 �00 �00 ��0 ���.� ���.� ��.� ��.� M�0 M�� ��.0 TBR464-432-464CFX

A B C

TBR448-432-448 �“ �“ �“

TBR448-448-432 �“ �“ �“

TBR432-448-448 �“ �“ �“

Order code suffixes

Material Suffixsurfaceand material

Example Comments

Steel, zinc plated, Cr(VI)-free CF TBR���-���-���CFX only flange block

Steel, oil dipped S TBR���-���-���SX only flange block

Stainless steel SS TBR���-���-���SSX only flange block

Please change suffixes according to material/surface required

Bolts and nuts

ISO ����

Size Tube

BoltISO ���� �0.�

NutISO �0��Tube/TubeTube/Port Tube/Tube

Description Order code Description Order code Description Order code�/�“ ��x�.0 M�x�0 ZYLS8X50109X M�x�00 ZYLS8X100109X M�-�0 ISO4032-M-8-10�/�“ ��x�.0 M�x�0 ZYLS8X50109X M�x�00 ZYLS8X100109X M�-�0 ISO4032-M-8-10

�“ �0x�.0 M�0x�� ZYLS10X55109X M�0x��0 ZYLS10X110109X M�0-�0 ISO4032-M-10-10�“ �0x�.0 M�0x�� ZYLS10X55109X M�0x��0 ZYLS10X110109X M�0-�0 ISO4032-M-10-10�“ ��x�.0 M�0x�� ZYLS10X55109X M�0x��0 ZYLS10X110109X M�0-�0 ISO4032-M-10-10�” ��x�.0 M�0x�� ZYLS10X55109X M�0x��0 ZYLS10X110109X M�0-�0 ISO4032-M-10-10

� �/�“ ��x�.0 M��x�0 ZYLS12X70109X M��x��0 ZYLS12X120109X M��-�0 ISO4032-M-12-10� �/�“ ��x�.0 M��x�0 ZYLS12X70109X M��x��0 ZYLS12X120109X M��-�0 ISO4032-M-12-10� �/�“ ��x�.0 M��x�0 ZYLS12X70109X M��x��0 ZYLS12X120109X M��-�0 ISO4032-M-12-10� �/�“ ��x�.0 M��x�0 ZYLS12X70109X M��x��0 ZYLS12X120109X M��-�0 ISO4032-M-12-10� �/�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10� �/�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10� �/�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10� �/�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10

�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10�“ �0x�.0 M��x�0 ZYLS16X90109X M��x��0 ZYLS16X170109X M��-�0 ISO4032-M-16-10

� �/�“ �0x�.0 M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X190109X M�0-�0 ISO4032-M-20-10� �/�“ ��x�.0 M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X190109X M�0-�0 ISO4032-M-20-10� �/�“ ��x�.� M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X190109X M�0-�0 ISO4032-M-20-10� �/�“ ��x��.� M�0x�00 ZYLS20X100109X M�0x��0 ZYLS20X190109X M�0-�0 ISO4032-M-20-10

�“ �0x�.0 M��x��0 ZYLS24X110109X M��x�00 ZYLS24X200109X M��-�0 ISO4032-M-24-10�“ �0x�.0 M��x��0 ZYLS24X110109X M��x�00 ZYLS24X200109X M��-�0 ISO4032-M-24-10�“ �0x�0.0 M��x��0 ZYLS24X110109X M��x�00 ZYLS24X200109X M��-�0 ISO4032-M-24-10�“ ��x��.0 M��x��0 ZYLS24X110109X M��x�00 ZYLS24X200109X M��-�0 ISO4032-M-24-10

Check torque details (see page ��)

Page 31: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

HPF – ISO 6164 Square flange

Page 32: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

Tube clamps

Tube clamps

DIN �0��

Tube clamps

Programme overview

Tube clamps series A

Page.64.–.73

Tube clamps series C

Page.79.–.89

Tube clamps series B

Page.74.–.78

Tube clamps series C with absorbing noise insert

Page.90.–.91

Programme:

Tube clamps series A (according to DIN 3015 Part 1)

Available.in.seven.standard.sizes.for.normal.mechanical.re-quirements.–. Outer.tube.diameter.for.the.metric.series.6.to.57.mm–. Outer.tube.diameter.for.the.inch-size.series.R.1/8˝.to.R.11/2˝–. Outer.tube.diameter.for.the.imperial.size.series.1/4˝.to.21/2˝The.clamp.body.is.available.in.a.round/closed.version.Welding.plates,.rail-supports,.cover.plates.and.construction..types.

Tube clamps series B (according to DIN 3015 Part 3)

Available.as.a.twin.tube.clamp.in.five.standard.sizes.for.normal.mechanical.requirements.Outer.tube.diameter.6.to.42.mm.The.clamp.body.is.available.in.a.square/open.design.Welding.plates,.rail-supports,.cover.plates.and.construction.types.Clamp.halves.with.different.diameters.are.only.possible.when.used.together.

Tube clamps series C (according to DIN 3015 Part 2)

Specially.designed.for.high.mechanical.requirements,.and.available.in.eight.standard.sizes.–. Outer.tube.diameter.6.to.220.mm.The.clamp.body.is.available.in.a.square/closed.design.Welding.plates,.rail-supports,.cover.plates.and.construction.types.

Design:

According.to.DIN.3015:Both.upper.and.lower.clamp-halves.are.identical.Webs.inside.the.bore.of.the.clamps.provide.an.impact.and.vibration.deadening.effect,.and.absorb.the.forces.towards.the.direction.of.the.tube.axis.When.using.hoses.and.cables,.we.recommand.the.use.of.clamp.halves.with.a.smooth.bore.

Clamp material:

Polypropylene. –30°C.up.to. +.. 90° C. colour.dark.greenPolyamide. – 40°C.up.to. +.120° C. colour.blackRubber. –50°C.up.to. +.120° C. colour.blackAluminium. up.to. +.300° C

All.metal.parts.available.also.in.stainless.steel.

Other.materials.upon.request.

Stainless.steel.qualities.Stainless.steel.1.4401/1.4571.(AISI.316/316.TI),.resistent.against.rust.and.acid.

Accessories material:

Steel..Screws.as.well.as.cover.plates.of.series.A.and.B.are..galvanized.

Rail-supports.are.also.available.with.zinc.plated.surface.

Resistance to stress:

The.remarkable.features.of.Tube.Clamps.are.their.considerable.re-set.capability,.high.tensile.strength,.as.well.as.their.very.high.output.strength.and.excellent.resistance.to.cold..The.choice.of.design.and.clamp.material.depends.on.the.specific.demands.of.the.mechanical.and.thermal.requirements.

Order code:

The.order.code.for.clamp.halves.as.well.as.the.reference.No..for.complete.tube.clamps.incorporates.the.serial.indication,.mate-rial.description.and.interior.surface.

Example of description:

�) Rubber only available for series A and B, inside smooth and series C grooved design

�) Aluminium only available for series A size � to � and series C size � to ��) Smooth interior surface in series C only to size �

Aluminium clamps only available in a grooved design Inside smooth series A only size � to �

Registration:

German.Lloyd,.Lloyd.s.Register.of.Shipping.and.others.

2 03R A PTube clampSeries: A = Light series B = Twin tube clamp C = Heavy series

Material: P = Polypropylene N = Polyamide (Nylon) V = Rubber1) A = Aluminium2)

Interior surface:Standard = grooved G = smooth3)

Size:

Diameter:

Page 33: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps assembly instruction

DIN �0��

Tube clamps

Tube clamps material properties

DIN �0��

Mechanical properties Polypropylene (PP) Polyamide � (PA �) Aluminium Rubber

Density 0.�0� g/cm� �.��–�.��g/cm� �.�� g/cm� 0.�� g/cm�

Flexural deflection DIN ����� �� N/mm� ��0...�00 N/mm� �0 N/mm� – Impact resistance DIN ����� no break no break – Compressive strength DIN ����� �0 N/mm� ��0 N/mm� HB �00...�00 N/mm� A and B: ��° shore C: ��° shore Modulus of elasticity DIN ����� ��00 N/mm� �000 N/mm� �0.000 N/mm� Tensile strength A and B: �.� N/mm� without breakage DIN ����� ��–�� N/mm� �0–�0 N/mm� ��0 N/mm� C: �.� N/mm�

Thermal properties

Temp. resistance –�0 … + �0° C –�0 … + ��0°C �00° C –�0 … +��0°C

Chemical properties

Weak acids limited resistant limited resistant resistant Weak alkalis limited resistant limited resistant resistant Alcohol resistant resistant resistant Petrol limited resistant resistant limited resistant Mineral oils resistant resistant resistant Other oils resistant resistant resistant

The.outlined.particulars.are.approximate.values.and.are.only.shown.for.reference,.which.are.not.binding,.and.with.regard.to.possible.protection.of.third.parties..They.do.not.exempt.you.from.your.own.examination.of.suitability.of.the.products.delivered.by.us..Therefore,.these.values.can.only.be.used.in.a.limited.way.for.guidance.only.

The.application.of.the.products.is.carried.out.outside.of.our.control.and,.therefore,.is.exclusively.subject.to.your.own.area.of.responsibility..Any.claim.however.would.be.limited.for.all.damages.to.the.value.of.the.goods.supplied.by.us.and.in.use.by.you.

It.goes.without.saying,.that.we.guarantee.the.perfect.quality.of.our.products.according.to.our.general.sales.and.delivery.conditions.

Assembly:Assembly on to metal welding plates

Place.welding.plates.on.a.base.appro-priate.for.the.load..Make.sure.that.the.clamps.are.properly.aligned..Clamp.lower.clamp.halve.onto.welding.plate,.insert.tube,.place.upper.clamp.halve.onto.lower.halve.and.fasten.with.the.screws..Attention.must.be.paid.to.the.bias.(after.completed.assembly,.clamp.halves.may.not.be.in.contact)!.Do.not.weld.with.fit-ted.plastic.clamp!Extended.welding.plates.may.be.screw-fastened.to.the.base.

Assembly on support rails

Support.rails.are.available.in.four.differ-ent.heights.and.come.in.pieces.of.1.m.or.2.m.length,.as.required.Weld.on.support.rail.or.screw-fasten.with.fastening.angle.bracket..Insert.support.rail.nuts.in.rail.and.turn.until.stoppage..For.heavy.duty.construction.series,.nuts.are.simply.pushed.in..Clamp.lower.clamp.half.on.support.rail.nuts,.insert.tube,.place.upper.clamp.halve.onto.lower.halve.and.fasten.with.the.screws..Before.fastening.the.screws.the.clamp.may.still.be.positioned..Attention.must.be.paid.to.the.bias.(after.completed.assembly,.the.clamp.halves.may.not.be.in.contact)!

Construction assembly

Clamps.allow.the.assembly.of.multiple.clamps.of.the.same.construction.size.and.of.different.tube.diameters.one.above.the.other..The.construction.assembly.is.carried.out.with.special.fixing.screws.that.are.secured.against.twisting.by.applying.a.locking.plate..Clamp.lower.clamp.halve.on.welding.plate.or.support.rail.respec-tively,.insert.tube,.place.upper.clamp.halve.on.lower.halve.and.fasten.with.fix-ing.screws..The.fixing.screw.juts.out.from..the.upper.clamp.halve..The.application..of.a.locking.plate.securely.fastens.the..fixing.screw.and.prevents.twisting..Clamp.on.second.clamp.halve.on.to.the.fixing.screws.etc.

Page 34: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series A (Light construction series) – Components

DIN �0��, part �

Tube clamps

Tube clamps series A (Light construction series) – Components

DIN �0��, part �b

c

e

a

a

b

c

e

d

30

e 30

ef

7

30

d

ef

7

d

a e

30

30

ae

d size 0 size 0 size 0 size 0

size �–� size �–� size �–� size �–� Width: �0 mm Thickness: � mm

Order code for clamp halves:

Polypropylene – RAP Inside smooth – RAPG Polyamide � – RAN Inside smooth – RANG Rubber – RAVG Aluminium – RAA1)

(Please exchange as required standard abbreviation RAP in column for “clamp halves”)

� part welding plate, short clamp size Tube O.D. mm Tube NB Tube O.D. � clamp halves RAP… dimensions: APK A… dimensions: a Order code b c d e Order code d e

� RAP006X �.� �/� RAP006.4X 0 � �/�� RAP008X �� �� – ��.� APKA0X – �0 �.� �/� RAP009.5X �0 G�/� RAP010X �� RAP012X � RAP106X �.� �/� RAP106.4X � � �/�� RAP108X �� �� �0 ��.� APKA1X �0 �� �.� �/� RAP109.5X �0 G�/� RAP110X �� RAP112X ��.� �/� RAP212.7X ��.� G�/� RAP213.5X �� RAP214X � �� RAP215X �0 �� �� ��.� APKA2X �� �� �� �/� RAP216X ��.� G�/� RAP217.2X �� RAP218X �� �/� RAP319X �0 RAP320X � ��.� G�/� RAP321.3X �� �� �� ��.� APKA3X �� �0 �� RAP322X �� RAP323X �� � RAP325X ��.� G�/� RAP426.9X � �� RAP428X �� �� �0 �� APKA4X �0 �� �0 RAP430X �� ��/� RAP532X ��.� G� RAP533.7X � �� RAP535X �0 �� �� �� APKA5X �� �� �� ��/� RAP538X �0 RAP540X �� G��/� RAP542X ��.� ��/� RAP644.5X �� RAP645X �� G��/� RAP648X � �0 RAP650X �� �� �� �� APKA6X �� �� �0.� � RAP650.8X �� RAP652X �� RAP655X �� ��/� RAP657X

When assemblying solid rubber clamps, covering plates, hexagon screws and locking washers must be used. All metal parts available in stainless steel. �) Aluminium only sizes � to �.

size 0 size 0

size �–� size �–� Thickness: � mm Thickness: � mm Thickness: � mm

clamp weld/screw plate, long twin welding plate multiple weld plate

size APL A… dimensions: APD A… dimensions: APR A… dimensions: Order code d e f Order code d a e Order code d a e

0 APLA0X – �� �� APDA0X – �0 �� APRA0X – �0 ��� (10 clamps) � APLA1X �0 �� �0 APDA1X �0 �� �� APRA1X �0 �� ��� (10 clamps) � APLA2X �� �0 �� APDA2X �� �� �� APRA2X �� �� ��� (10 clamps) � APLA3X �� �� �� APDA3X �� �� �0� APRA3X �� �� ��� (10 clamps) � APLA4X �0 �� �� APDA4X �0 �0 ��� APRA4X �0 �0 ��� (5 clamps) � APLA5X �� �00 �� APDA5X �� �� ��� APRA5X �� �� ��0 (5 clamps) � APLA6X �� ��� �00 APDA6X �� �0 ��� APRA6X �� �0 ��� (5 clamps)

Metal parts also available in stainless steel.

Page 35: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series A (Light construction series) – Components

DIN �0��, part �

Tube clamps

Tube clamps series A (Light construction series) – Components

DIN �0��, part �

25e d

6,6

30

e dd

6,6

h

28

11

2

14,5

c

5

m

a

b

30

28

d

30

b

l

d d

l

d

l size 0 size 0

size �–� size �–� Thickness: �mm

� or � mtr

clamp weld plate, angled mounting rail rail nut

size APW A… dimensions: TS…A/B dimensions: TM…A/B1 dimensions: Order code d e Order code h Order code a b c m

0 APWA0X �� �0

� APWA1X �0 ��

TS11A/B1X � APWA2X �� �� TS11A/B2X TS14A/B1X TS��: �� � APWA3X �� �0 TS14A/B2X TS��: �� TMA/TMB1VERZX ��.� �0.� �� M�

TS30A/B1X TS�0: �0 � APWA4X �0 �� TS30A/B2X � APWA5X �� ��

� APWA6X �� ��

Metal parts also available in stainless steel.

size 0 size 0

size �–� size �–� DIN �� DIN ���/��� DIN��� Thickness: � mm

clamp cover plate slot head hexagon head socket head

size DP A… dimensions: SL A… dimensions: SSL A… dimensions: IS A… dimensions: Order code b d Order code d × L Order code d × L Order code d × L

0 DPA0X – – SLA0X M � × �0 SSL10X M � × �0 ISA0X M � × �0

� DPA1X �� �0 SLA1X M � × �0 SSLAOX M � × �0 ISA1X M � × �0

� DPA2X �0 �� SLA2X M � × �� SSLA2/SSB1X M � × �� ISA2X M � × ��

� DPA3X �� �� SLA3X M � × �0 SSLA3X M � × �0 ISA3X M � × �0

� DPA4X �� �0 SLA4X M � × �� SSLA4X M � × �� ISA4X M � × ��

� DPA5X �0 �� SLA5X M � × �0 SSLA5X M � × �0 ISA5X M � × �0

� DPA6X �� �� SLA6X M � × �0 SSLA6X M � × �0 ISA6X M � × �0

All metal parts available in stainless steel.

Page 36: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series A (Light construction series) – Complete range

Tube clamps

Tube clamps series A (Light construction series) – Components

DIN �0��, part �

M 6

12a

b

M 6sw 11

17

sw

8 9,521

a

3,5

b

a

clamp stacking�) locking plate�) locking washer�)

size AS A… dimensions: SB A dimensions: US A dimensions: Order code a b Order code a SW Order code a b

0 ASA0X �0 �� (AS B1X)

� ASA0X �0 �� (ASB1X)

� ASA2X �� �� SBAX �0 �� USA/USB1X � �� � ASA3X �0 ��

� ASA4X �� ��

� ASA5X �0 ��

� ASA6X �0 ��

�) The use of stacking bolts necessitates the use of locking plates in the construction assembly.�) When assembling solid rubber clamps, cover plates, hexagon screws and locking washers must be used.Metal parts also available in stainless steel.

Polypropylene – RAP Inside smooth – RAPG Polyamide � – RAN Inside smooth – RANG Rubber – RAVG* Aluminium – RAA

(As required please exchange standard abbreviation RAP in column for “Order code”)

� clamp halves, weld plate short, slot head bolts and bushes

SLA…

RAP…

APKA…

� clamp halves, weld plate short, socket head bolts and bushes

ISA…

RAP…

APKA…

� clamp halves, weld plate short, cover plate hex. head bolts

SSLA…

DPA…

RAP…

APKA…

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code Order code

� RAP1–006 RAP2–006 RAP3–006 �.� �/� RAP1–006.4 RAP2–006.4 RAP3–006.4 0�) � �/�� RAP1–008 RAP2–008 RAP3–008 �.� �/� RAP1–009.5 RAP2–009.5 RAP3–009.5 �0 G�/� RAP1–010 RAP2–010 RAP3–010 �� RAP1–012 RAP2–012 RAP3–012 � RAP1–106 RAP2–106 RAP3–106 �.� �/� RAP1–106.4 RAP2–106.4 RAP3–106.4 � � �/�� RAP1–108 RAP2–108 RAP3–108 �.� �/� RAP1–109.5 RAP2–109.5 RAP3–109.5 �0 G�/� RAP1–110 RAP2–110 RAP3–110 �� RAP1–112 RAP2–112 RAP3–112 ��.� �/� RAP1–212.7 RAP2–212.7 RAP3–212.7 ��.� G�/� RAP1–213.5 RAP2–213.5 RAP3–213.5 �� RAP1–214 RAP2–214 RAP3–214 � �� RAP1–215 RAP2–215 RAP3–215 �� �/� RAP1–216 RAP2–216 RAP3–216 ��.� G�/� RAP1–217.2 RAP2–217.2 RAP3–217.2 �� RAP1–218 RAP2–218 RAP3–218 �� �/� RAP1–319 RAP2–319 RAP3–319 �0 RAP1–320 RAP2–320 RAP3–320 � ��.� G�/� RAP1–321.3 RAP2–321.3 RAP3–321.3 �� RAP1–322 RAP2–322 RAP3–322 �� RAP1–323 RAP2–323 RAP3–323 �� � RAP1–325 RAP2–325 RAP3–325 ��.� G�/� RAP1–426.9 RAP2–426.9 RAP3–426.9 � �� RAP1–428 RAP2–428 RAP3–428 �0 RAP1–430 RAP2–430 RAP3–430 �� ��/� RAP1–532 RAP2–532 RAP3–532 ��.� G� RAP1–533.7 RAP2–533.7 RAP3–533.7 � �� RAP1–535 RAP2–535 RAP3–535 �� ��/� RAP1–538 RAP2–538 RAP3–538 �0 RAP1–540 RAP2–540 RAP3–540 �� G��/� RAP1–542 RAP2–542 RAP3–542 ��.� ��/� RAP1–644.5 RAP2–644.5 RAP3–644.5 �� RAP1–645 RAP2–645 RAP3–645 �� G��/� RAP1–648 RAP2–648 RAP3–648 � �0 RAP1–650 RAP2–650 RAP3–650 �0.� � RAP1–650.8 RAP2–650.8 RAP3–650.8 �� RAP1–652 RAP2–652 RAP3–652 �� RAP1–655 RAP2–655 RAP3–655 �� ��/� RAP1–657 RAP2–657 RAP3–657

Delivery in unassembled individual components.�) Contrary to the illustration size 0 clamps are secured by only one screw. * Only with cover plate, hexagon screws and locking washers.

Page 37: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

Tube clamps

Tube clamps series A (Light construction series) – Complete range

Tube clamps

Tube clamps series A (Light construction series) – Complete range

Polypropylene – RAP Inside smooth – RAPG Polyamide � – RAN Inside smooth – RANG Rubber – RAVG* Aluminium – RAA

(As required please exchange standard abbreviation RAP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code Order code

� RAP4–006 RAP5–006 RAP6–006 �.� �/� RAP4–006.4 RAP5–006.4 RAP6–006.4 0�) � �/�� RAP4–008 RAP5–008 RAP6–008 �.� �/� RAP4–009.5 RAP5–009.5 RAP6–009.5 �0 G�/� RAP4–010 RAP5–010 RAP6–010 �� RAP4–012 RAP5–012 RAP6–012 � RAP4–106 RAP5–106 RAP6–106 �.� �/� RAP4–106.4 RAP5–106.4 RAP6–106.4 � � �/�� RAP4–108 RAP5–108 RAP6–108 �.� �/� RAP4–109.5 RAP5–109.5 RAP6–109.5 �0 G�/� RAP4–110 RAP5–110 RAP6–110 �� RAP4–112 RAP5–112 RAP6–112 ��.� �/� RAP4–212.7 RAP5–212.7 RAP6–212.7 ��.� G�/� RAP4–213.5 RAP5–213.5 RAP6–213.5 �� RAP4–214 RAP5–214 RAP6–214 � �� RAP4–215 RAP5–215 RAP6–215 �� �/� RAP4–216 RAP5–216 RAP6–216 ��.� G�/� RAP4–217.2 RAP5–217.2 RAP6–217.2 �� RAP4–218 RAP5–218 RAP6–218 �� �/� RAP4–319 RAP5–319 RAP6–319 �0 RAP4–320 RAP5–320 RAP6–320 � ��.� G�/� RAP4–321.3 RAP5–321.3 RAP6–321.3 �� RAP4–322 RAP5–322 RAP6–322 �� RAP4–323 RAP5–323 RAP6–323 �� � RAP4–325 RAP5–325 RAP6–325 ��.� G�/� RAP4–426.9 RAP5–426.9 RAP6–426.9 � �� RAP4–428 RAP5–428 RAP6–428 �0 RAP4–430 RAP5–430 RAP6–430 �� ��/� RAP4–532 RAP5–532 RAP6–532 ��.� G� RAP4–533.7 RAP5–533.7 RAP6–533.7 � �� RAP4–535 RAP5–535 RAP6–535 �� ��/� RAP4–538 RAP5–538 RAP6–538 �0 RAP4–540 RAP5–540 RAP6–540 �� G��/� RAP4–542 RAP5–542 RAP6–542 ��.� ��/� RAP4–644.5 RAP5–644.5 RAP6–644.5 �� RAP4–645 RAP5–645 RAP6–645 �� G��/� RAP4–648 RAP5–648 RAP6–648 � �0 RAP4–650 RAP5–650 RAP6–650 �0.� � RAP4–650.8 RAP5–650.8 RAP6–650.8 �� RAP4–652 RAP5–652 RAP6–652 �� RAP4–655 RAP5–655 RAP6–655 �� ��/� RAP4–657 RAP5–657 RAP6–657

Delivery in unassembled individual components.�) Contrary to the illustration size 0 clamps are secured by only one screw. * Only with cover plate, hexagon screws and locking washers.

� clamp halves, weld/ screw plate, slot head bolts and bushes

SLA…

RAP…

APLA…

� clamp halves, weld/ screw plate, socket head bolts and bushes

ISA…

RAP…

APLA…

� clamp halves, weld/ screw plate, cover pla-te and hex. head bolts

SSLA…

DPA

RAP…

APLA…

Polypropylene – RAP Inside smooth – RAPG Polyamide � – RAN Inside smooth – RANG Rubber – RAVG* Aluminium – RAA

(As required please exchange standard abbreviation RAP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code Order code

� RAP9–006 RAP10–006 RAP12–006 �.� �/� RAP9–006.4 RAP10–006.4 RAP12–006.4 0�) � �/�� RAP9–008 RAP10–008 RAP12–008 �.� �/� RAP9–009.5 RAP10–009.5 RAP12–009.5 �0 G�/� RAP9–010 RAP10–010 RAP12–010 �� RAP9–012 RAP10–012 RAP12–012 � RAP9–106 RAP10–106 RAP12–106 �.� �/� RAP9–106.4 RAP10–106.4 RAP12–106.4 � � �/�� RAP9–108 RAP10–108 RAP12–108 �.� �/� RAP9–109.5 RAP10–109.5 RAP12–109.5 �0 G�/� RAP9–110 RAP10–110 RAP12–110 �� RAP9–112 RAP10–112 RAP12–112 ��.� �/� RAP9–212.7 RAP10–212.7 RAP12–212.7 ��.� G�/� RAP9–213.5 RAP10–213.5 RAP12–213.5 �� RAP9–214 RAP10–214 RAP12–214 � �� RAP9–215 RAP10–215 RAP12–215 �� �/� RAP9–216 RAP10–216 RAP12–216 ��.� G�/� RAP9–217.2 RAP10–217.2 RAP12–217.2 �� RAP9–218 RAP10–218 RAP12–218 �� �/� RAP9–319 RAP10–319 RAP12–319 �0 RAP9–320 RAP10–320 RAP12–320 � ��.� G�/� RAP9–321.3 RAP10–321.3 RAP12–321.3 �� RAP9–322 RAP10–322 RAP12–322 �� RAP9–323 RAP10–323 RAP12–323 �� � RAP9–325 RAP10–325 RAP12–325 ��.� G�/� RAP9–426.9 RAP10–426.9 RAP12–426.9 � �� RAP9–428 RAP10–428 RAP12–428 �0 RAP9–430 RAP10–430 RAP12–430 �� ��/� RAP9–532 RAP10–532 RAP12–532 ��.� G� RAP9–533.7 RAP10–533.7 RAP12–533.7 � �� RAP9–535 RAP10–535 RAP12–535 �� ��/� RAP9–538 RAP10–538 RAP12–538 �0 RAP9–540 RAP10–540 RAP12–540 �� G��/� RAP9–542 RAP10–542 RAP12–542 ��.� ��/� RAP9–644.5 RAP10–644.5 RAP12–644.5 �� RAP9–645 RAP10–645 RAP12–645 �� G��/� RAP9–648 RAP10–648 RAP12–648 � �0 RAP9–650 RAP10–650 RAP12–650 �0.� � RAP9–650.8 RAP10–650.8 RAP12–650.8 �� RAP9–652 RAP10–652 RAP12–652 �� RAP9–655 RAP10–655 RAP12–655 �� ��/� RAP9–657 RAP10–657 RAP12–657

Delivery in unassembled individual components.�) Contrary to the illustration size 0 clamps are secured by only one screw. * Only with cover plate, hexagon screws and locking washers.

� clamp halves, rail nuts, slot head bolts and bushes

SLA…

RAP…

TMA…

� clamp halves, rail nuts, socket head bolts and bushes

ISA…

RAP…

TMA…

� clamp halves, rail nuts, cover plate and hex. head bolts

SSLA…

DPA RAP…

TMA…

Page 38: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series A – Complete range

Tube clamps

Tube clamps series A – Complete range

Polypropylene – RAP Inside smooth – RAPG Polyamide � – RAN Inside smooth – RANG Rubber – RAVG* Aluminium – RAA

(As required please exchange standard abbreviation RAP in column for “Order code”)

� clamp halves, slot heads and bushes

SLA…

RAP…

� clamp halves, socket head bolts and bushes

ISA…

RAP…

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

� RAP13–006 RAP14–006 �.� �/� RAP13–006.4 RAP14–006.4 0�) � �/�� RAP13–008 RAP14–008 �.� �/� RAP13–009.5 RAP14–009.5 �0 G�/� RAP13–010 RAP14–010 �� RAP13–012 RAP14–012 � RAP13–106 RAP14–106 �.� �/� RAP13–106.4 RAP14–106.4 � � �/�� RAP13–108 RAP14–108 �.� �/� RAP13–109.5 RAP14–109.5 �0 G�/� RAP13–110 RAP14–110 �� RAP13–112 RAP14–112 ��.� �/� RAP13–212.7 RAP14–212.7 ��.� G�/� RAP13–213.5 RAP14–213.5 �� RAP13–214 RAP14–214 � �� RAP13–215 RAP14–215 �� �/� RAP13–216 RAP14–216 ��.� G�/� RAP13–217.2 RAP14–217.2 �� RAP13–218 RAP14–218 �� �/� RAP13–319 RAP14–319 �0 RAP13–320 RAP14–320 � ��.� G�/� RAP13–321.3 RAP14–321.3 �� RAP13–322 RAP14–322 �� RAP13–323 RAP14–323 �� � RAP13–325 RAP14–325 ��.� G�/� RAP13–426.9 RAP14–426.9 � �� RAP13–428 RAP14–428 �0 RAP13–430 RAP14–430 �� ��/� RAP13–532 RAP14–532 ��.� G� RAP13–533.7 RAP14–533.7 � �� RAP13–535 RAP14–535 �� ��/� RAP13–538 RAP14–538 �0 RAP13–540 RAP14–540 �� G��/� RAP13–542 RAP14–542 ��.� ��/� RAP13–644.5 RAP14–644.5 �� RAP13–645 RAP14–645 �� G��/� RAP13–648 RAP14–648 � �0 RAP13–650 RAP14–650 �0.� � RAP13–650.8 RAP14–650.8 �� RAP13–652 RAP14–652 �� RAP13–655 RAP14–655 �� ��/� RAP13–657 RAP14–657

Delivery in unassembled individual components.�) Contrary to the illustration size 0 clamps are secured by only one screw. * Only with cover plate, hexagon screws and locking washers.

Polypropylene – RAP Inside smooth – RAPG Polyamide � – RAN Inside smooth – RANG Rubber – RAVG* Aluminium – RAA

(As required please exchange standard abbreviation RAP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

� RAP16–006 RAP18–006 �.� �/� RAP16–006.4 RAP18–006.4 0�) � �/�� RAP16–008 RAP18–008 �.� �/� RAP16–009.5 RAP18–009.5 �0 G�/� RAP16–010 RAP18–010 �� RAP16–012 RAP18–012 � RAP16–106 RAP18–106 �.� �/� RAP16–106.4 RAP18–106.4 � � �/�� RAP16–108 RAP18–108 �.� �/� RAP16–109.5 RAP18–109.5 �0 G�/� RAP16–110 RAP18–110 �� RAP16–112 RAP18–112 ��.� �/� RAP16–212.7 RAP18–212.7 ��.� G�/� RAP16–213.5 RAP18–213.5 �� RAP16–214 RAP18–214 � �� RAP16–215 RAP18–215 �� �/� RAP16–216 RAP18–216 ��.� G�/� RAP16–217.2 RAP18–217.2 �� RAP16–218 RAP18–218 �� �/� RAP16–319 RAP18–319 �0 RAP16–320 RAP18–320 � ��.� G�/� RAP16–321.3 RAP18–321.3 �� RAP16–322 RAP18–322 �� RAP16–323 RAP18–323 �� � RAP16–325 RAP18–325 ��.� G�/� RAP16–426.9 RAP18–426.9 � �� RAP16–428 RAP18–428 �0 RAP16–430 RAP18–430 �� ��/� RAP16–532 RAP18–532 ��.� G� RAP16–533.7 RAP18–533.7 � �� RAP16–535 RAP18–535 �� ��/� RAP16–538 RAP18–538 �0 RAP16–540 RAP18–540 �� G��/� RAP16–542 RAP18–542 ��.� ��/� RAP16–644.5 RAP18–644.5 �� RAP16–645 RAP18–645 �� G��/� RAP16–648 RAP18–648 � �0 RAP16–650 RAP18–650 �0.� � RAP16–650.8 RAP18–650.8 �� RAP16–652 RAP18–652 �� RAP16–655 RAP18–655 �� ��/� RAP16–657 RAP18–657

Delivery in unassembled individual components.�) Contrary to the illustration size 0 clamps are secured by only one screw. * Only with cover plate, hexagon screws and locking washers.

� clamp halves, cover plate and hex. head bolts

SSLA…

DPA…

RAP…

� clamp halves, stacking bolts and locking plate

SBA…

ASA…

RAP…

Page 39: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series B (Twin-tube clamps) – Components

DIN �0��, part �

Tube clamps

Tube clamps series B (Twin-tube clamps) – Components

DIN �0��, part �

b

ce

a1 a2

d

30

g

m

14,5

c

5

m

a

b

h

28

11

2

de

30

30

b

7

d

d

l

Order code for clamp halves:

Polypropylene – RBP Inside smooth – RBPG Polyamide � – RBN Rubber – RBVG

(Please exchange standard abbreviation RBP in column for “clamp halves” as required.)

� part weld plate clamp size Tube O.D. mm Tube NB Tube O.D. � clamp halves�) RBP… dimensions: APB… dimensions: Order code b c d e Order code g m

� RBP106X �.� �/� RBP106.4X � � �/�� RBP108X �� �� �0 ��.� APB1X �� M � �.� �/� RBP109.5X �0 G�/� RBP110X �� RBP112X Thickness: � mm ��.� �/� RBP212.7X ��.� G�/� RBP213.5X �� RBP214X � �� RBP215X �� �� �� �� APB2X �� M � �� �/� RBP216X ��.� G�/� RBP217.2X �� RBP218X Thickness: � mm �� �/� RBP319X �0 RBP320X � ��.� G�/� RBP321.3X �� �� �� ��.� APB3X �0 M � �� RBP322X �� � RBP325X Thickness: � mm ��.� G�/� RBP426.9X � �� RBP428X �� �� �� �� APB4X �� M � �0 RBP430X Thickness: � mm �� ��/� RBP532X ��.� G� RBP533.7X � �� RBP535X �0� �� �� �� APB5X ��0 M � �� ��/� RBP538X �� G��/� RBP542X Thickness: � mm

Metal parts also available in stainless steel. �) Twin-tube clamps with different outer tube diameters upon request.

Width: �0 mm

clamp multiple weld plate mounting rail rail nut size APRB… dimensions: TS…A/B dimensions: TM… dimensions: Order code d e Order code h Order code a b c m

APRB1X � (5 clamps) �0 ��� TMA/TMB1VERZX ��.� �0.� �� M � Thickness: � mm APRB2X � (5 clamps) �� ��� TS11A/B1X Thickness: � mm TS11A/B2X APRB3X TS14A/B1X TS��: �� � (5 clamps) �� ��� TS14A/B2X TS��: �� Thickness: � mm TS30A/B1X TS�0: �0 TMB2X ��.� �0.� �� M� APRB4X TS30A/B2X � (5 clamps) �0 ��� Thickness: � mm APRB5X � (5 clamps) ��� ��� Thickness: � mm

� or � mtr

clamp size cover plate hexagonal head DP B… dimensions: SS B… dimensions: Order code b d Order code d × L

� DPB1X �� �.� SSLA2/SSB1X M � × ��

� DPB2X �� �.� SSB2X M � × ��

� DPB3X �� �.� SSB3X M � × ��

� DPB4X �� �.� SSB4X M � × �0

� DPB5X �0� �.� SSB5X M � × �0

Metal parts also available in stainless steel.

DIN ���/���

Tube clamps series B (Twin-tube clamps) – Components

DIN �0��, part �

Page 40: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series B – Complete range

Tube clamps

Tube clamps series B (Twin-tube clamps) – Components

DIN �0��, part �

d

l

M 6

12a

b

M 6sw 11

0,5

sw

27 15

20

2

22

b

a

clamp socket head stacking locking plate�) locking washer�) size IS B… dimensions: AS B… dimensions: SB B… dimensions: US… dimensions: Order code d × L Order code a b m SW Order code SW Order code a b

� ISA4X M � × �� ASA0X �0 �� M � �� SBB1X �� USA/USB1X � �� (ISB1X) (ASB1X)

� ISB2X M � × �� ASB2X �0 �� M � ��

� ISB3X M � × �� ASB3X �� �� M � �� SBB2X �� USB2X �� �0

� ISB4X M � × �0 ASB4X �� �� M � ��

� ISB5X M � × �0 ASB5X �� �� M � ��

�) The use of stacking screws necessitates the use of locking plates in the construction assembly!�) When assemblying solid rubber clamps, covering plates, he×agon screws and locking washers must be used.Metal parts also available in stainless steel.

DIN ���Polypropylene – RBP Inside smooth – RBPG Polyamide � – RBN Rubber – RBVG*

(As required please exchange standard abbreviation RBP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

� RBP1–106 RBP3–106 �.� �/� RBP1–106.4 RBP3–106.4 � � �/�� RBP1–108 RBP3–108 �.� �/� RBP1–109.5 RBP3–109.5 �0 G�/� RBP1–110 RBP3–110 �� RBP1–112 RBP3–112 ��.� �/� RBP1–212.7 RBP3–212.7 ��.� G�/� RBP1–213.5 RBP3–213.5 �� RBP1–214 RBP3–214 � �� RBP1–215 RBP3–215 �� �/� RBP1–216 RBP3–216 ��.� G�/� RBP1–217.2 RBP3–217.2 �� RBP1–218 RBP3–218 �� �/� RBP1–319 RBP3–319 �0 RBP1–320 RBP3–320 � ��.� G�/� RBP1–321.3 RBP3–321.3 �� RBP1–322 RBP3–322 �� � RBP1–325 RBP3–325 ��.� G�/� RBP1–426.9 RBP3–426.9 � �� RBP1–428 RBP3–428 �0 RBP1–430 RBP3–430 �� ��/� RBP1–532 RBP3–532 ��.� G� RBP1–533.7 RBP3–533.7 � �� RBP1–535 RBP3–535 �� ��/� RBP1–538 RBP3–538 �� G��/� RBP1–542 RBP3–542

Delivery in unassembled individual components.*Only with cover plate, hexagon screws and locking washers.

� clamp halves, weld plate, cover plate, hex. head bolt

SSB…

DPB…

RBP…

APB…

� clamp halves, weld plate, cover plate, socket head bolt

ISB…

DPB…

RBP…

APB…

Page 41: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series C (Heavy series) – Components

DIN �0��, part �

Tube clamps

Tube clamps series B – Complete range

a

b

ce

d

f

f

Polypropylene – RBP Inside smooth – RBPG Polyamide � – RBN Rubber – RBVG*

(As required please exchange standard abbreviation RBP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code Order code

� RBP4–106 RBP5–106 RBP8–106 �.� �/� RBP4–106.4 RBP5–106.4 RBP8–106.4 � � �/�� RBP4–108 RBP5–108 RBP8–108 �.� �/� RBP4–109.5 RBP5–109.5 RBP8–109.5 �0 G�/� RBP4–110 RBP5–110 RBP8–110 �� RBP4–112 RBP5–112 RBP8–112 ��.� �/� RBP4–212.7 RBP5–212.7 RBP8–212.7 ��.� G�/� RBP4–213.5 RBP5–213.5 RBP8–213.5 �� RBP4–214 RBP5–214 RBP8–214 � �� RBP4–215 RBP5–215 RBP8–215 �� �/� RBP4–216 RBP5–216 RBP8–216 ��.� G�/� RBP4–217.2 RBP5–217.2 RBP8–217.2 �� RBP4–218 RBP5–218 RBP8–218 �� �/� RBP4–319 RBP5–319 RBP8–319 �0 RBP4–320 RBP5–320 RBP8–320 � ��.� G�/� RBP4–321.3 RBP5–321.3 RBP8–321.3 �� RBP4–322 RBP5–322 RBP8–322 �� � RBP4–325 RBP5–325 RBP8–325 ��.� G�/� RBP4–426.9 RBP5–426.9 RBP8–426.9 � �� RBP4–428 RBP5–428 RBP8–428 �0 RBP4–430 RBP5–430 RBP8–430 �� ��/� RBP4–532 RBP5–532 RBP8–532 ��.� G� RBP4–533.7 RBP5–533.7 RBP8–533.7 � �� RBP4–535 RBP5–535 RBP8–535 �� ��/� RBP4–538 RBP5–538 RBP8–538 �� G��/� RBP4–542 RBP5–542 RBP8–542

Delivery in unassembled individual components.*Only with cover plate, hexagon screws and locking washers.

Order code for clamp halves:

Polypropylene – RCP Inside smooth – RCPG1) Polyamide � – RCN1) Rubber – RCVR Aluminium – RCA

(Please exchange as required standard abbreviation RCP in column for “clamp halves”)

� part � part clamp Tube O.D. Tube NB Tube O.D. � clamp halves � clamp halves size mm RCP… dimensions: RCPD… dimensions: Order code b c d e f Order code b c d e f � RCP106X RCPD106 � �/�� RCP108X RCPD108 �0 G �/� RCP110X RCPD110 �� RCP112X RCPD112 ��.� �/� RCP112.7X RCPD112.7 � ��.� G �/� RCP113.5X �� �� �� �� �0 RCPD113.5 �� �� �� �� �0 �� RCP114X RCPD114 �� RCP115X RCPD115 �� �/� RCP116X RCPD116 ��.� G �/� RCP117.2X RCPD117.2 �� RCP118X RCPD118 �� �/� RCP219X RCPD219 �0 RCP220X RCPD220 ��.� G �/� RCP221.3X RCPD221.3 �� RCP222X RCPD222 � �� RCP223X �0 �� �� �� �0 RCPD223 �0 �� �� �� �0 �� � RCP225X RCPD225 ��.� G �/� RCP226.9X RCPD226.9 �� RCP228X RCPD228 �0 RCP230X RCPD230 �0 RCP330X RCPD330 �� ��/� RCP332X RCPD332 ��.� G � RCP333.7X RCPD333.7 � �� RCP335X �� �0 �0 �0 �0 RCPD335 �� �0 �0 �0 �0 �� ��/� RCP338X RCPD338 �0 RCP340X RCPD340 �� G ��/� RCP342X RCPD342 �� ��/� RCP438X RCPD428 �0 RCP440X RCPD440 �� G ��/� RCP442X RCPD442 �� RCP445X RCPD445 ��.� G ��/� RCP448.3X RCPD448.3 �0 RCP450X RCPD450 � �� � RCP451X ��� �0 �0 �� �� RCPD451 ��� �0 �0 �� �0 �� RCP452X RCPD452 �� RCP455X RCPD455 �� ��/� RCP457X RCPD457 �0.� G � RCP460.3X RCPD460.3 �� ��/� RCP463X RCPD463 �� RCP465X RCPD465 �0 RCP470X RCPD470

Continuation see next page …

RCPD (= 2XRCP…)

� clamp halves, rail nut, cover plate, hex. head bolt

SSB…

DPB…

RBP…

TMB…

� clamp halves, rail nut, cover plate, socket head bolt

ISB…

DPB…

RBP…

TMB…

� clamp halves, locking plate, stacking bolt

SBB…

ASB…

RBP…

Page 42: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�0 ��

Tube clamps

Tube clamps series C (Heavy series) – Components

DIN �0��, part �

Tube clamps

Tube clamps series C (Heavy series) – Components (Continued)

a

b

ce

d

f

f

m

if

g

d

m

if

d

g

f

gk

n

i

h

b

11

h

� part � part clamp Tube O.D. Tube NB Tube O.D. � clamp halves � clamp halves size mm RCP… dimensions: RCPD… dimensions: Order code b c d e f Order code b c d e f �0 RCP570X RCPD570 �� RCP573X RCPD573 �� RCP575X RCPD575 � ��.� G ��/� � RCP576.1X ��� ��0 ��� �0 �0 RCPD576.1 ��� ��0 ��� �0 ��0 �0 RCP580X RCPD580 ��.� ��/� RCP582.5X RCPD582.5 ��.� G � ��/� RCP588.9X RCPD588.9 �0 RCP590X RCPD590 �0 RCP690X RCPD690 �� RCP697X RCPD697 �00 RCP6100X RCPD6100 � �0�.� G ��/� � RCP6101.6X �0� ��0 ��� �� �0 RCPD6101.6 �0� ��0 ��� �� ��0 �0� ��/� RCP6108X RCPD6108 ���.� G � ��/� RCP6114.3X RCPD6114.3 ��� � RCP6127X RCPD6127 ��� � RCP7127X RCPD7127 ��� ��/� RCP7133X RCPD7133 ��0 G � ��/� RCP7140X RCPD7140 � ��0 RCP7150X ��0 �00 �0� �00 �0 RCPD7150 ��0 �00 �0� �00 ��0 ���.� G ��/� � RCP7152.4X RCPD7152.4 ��� � �/� RCP7159X RCPD7159 ���.� G � � �/� RCP7165.1X RCPD7165.1 ���.� ��/� RCP7168.3X RCPD7168.3 ���.� � �/� RCP8168.3X RCPD8168.3 ���.� � RCP8177.8X RCPD8177.8 � ���.� ��/� RCP8193.7X ��0 ��0 ��� ��� ��0 RCPD8193.7 ��0 ��0 ��� ��� ��0 �0� RCP8203X RCPD8203 ���.� G � ��/� RCP8219.1X RCPD8219.1 ��0 RCP8220X RCPD8220

Metal parts also available in stainless steel.�) Only sizes �–�

Order code for clamp halves:

Polypropylene – RCP Inside smooth – RCPG1) Polyamide � – RCN1) Rubber – RCVR Aluminium – RCA

(Please exchange as required standard abbreviation RCP in column for “clamp halves”)

RCPD (= 2XRCP…)

clamp weld plate double weld plate weld/screw plate mounting rail size AP C… dimensions: APD C… dimensions: APL C… dimensions: TS C… dim.: Order Order Order Order code d f g i m code d f g i m code g f i k n code b h

� APC1X �� �0 �� � M�0 APDC1X �� �0 �� � M�0 APLC1X ��� �0 � �� �� TSC1X

� APC2X �� �0 �� � M�0 APDC2X �� �0 �� � M�0 APLC2X ��� �0 � �� �� (1 Meter)

�0 �� � APC3X �0 �0 �00 � M�0 APDC3X �0 �0 �00 � M�0 APLC3X ��0 �0 � ��� ��

TSC2X

� APC4X �0 �� ��0 �0 M�� APDC4X �0 �0 ��0 �0 M�� APLC4X ��0 �� �0 ��0 ��

(2 Meter)

� APC5X ��� �0 ��0 �0 M�� APDC5X ��� ��0 ��0 �0 M�� APLC5X ��0 �0 �0 �0� ��

� APC6X ��� �0 ��� �� M�0 APDC6X ��� ��0 ��� �� M�0 APLC6X ��0 �0 �� ��0 ��

� APC7X �0� �0 ��0 �� M�� APDC7X �0� ��0 ��0 �� M�� APLC7X ��0 �0 �� ��0 ��

� APC8X ��� ��0 ��0 �� M�0 APDC8X ��� ��0 ��0 �� M�0 APLC8X ��0 ��0 �� ��0 ��

Metal parts also available in stainless steel.Complete programme range please refer to page ��.

Page 43: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series C (Heavy series) – Components

DIN �0��, part �

Tube clamps

Tube clamps series C (Heavy series) – Components

DIN �0��, part �

f

b

d

m

i

f

d

b

m

i

d

l

25

12

24

6md

b

b

a

d

l

m

ab

msw

da

ec

b

clamp rail nut cover plate double cover plate he×agon head size TM C… dimensions: DP C… dimensions: DPD C… dimensions: SS C… dimensions: Order Order Order Order code b d m code b d f i m code b d f i m code d × L

� DPC1X �� �� �0 � �� DPDC1X �� �� �0 � �� SSC1X M �0 × ��

� TMC1X �0 ��.� M �0 DPC2X �0 �� �0 � �� DPDC2X �0 �� �0 � �� SSC2X M �0 × �0

� DPC3X �� �0 �0 � �� DPDC3X �� �0 �0 � �� SSC3X M �0 × �0

� TMC4X �� ��.� M �� DPC4X ��� �0 �� �0 �� DPDC4X ��� �0 �0 �0 �� SSC4X M �� × �00

� DPC5X ��� ��� �0 �0 �� DPDC5X ��� ��� ��0 �0 �� SSC5X M �� × ��0

� DPC6X �0� ��� �0 �� �� DPDC6X �0� ��� ��0 �� �� SSC6X M �0 × ��0

� DPC7X ��0 �0� �0 �� �� DPDC7X ��0 �0� ��0 �� �� SSC7X M �� × ��0

� DPC8X ��0 ��� ��0 �� �� DPDC8X ��0 ��� ��0 �� �� SSC8X M �0 × �00

Metal parts also available in stainless steel.

DIN ���/���

clamp socket head stacking locking plate�) locking washer�) size IS C… dimensions: AS C… dimensions: SP C… dimensions: US C… dimensions: Order Order Order Order code d × L code a b m SW code a b c d e code a b

� ISC1X M �0 × �� ASC1X �� �� M �0 �� SPC1X �� �0 � �� ��.�

� ISC2X M �0 × �0 ASC2X �0 �� M �0 �� SPC2X �0 �0 � �� ��.� USC1X �� ��

� ISC3X M �0 × �0 ASC3X �0 �� M �0 �� SPC3X �� �0 � �� ��.�

� ISC4X M �� × �00 ASC4X �� ��� M �� �� SPC4X ��� �� �0 �� ��.� USC4X �� ��

� ISC5X M �� × ��0 ASC5X ��0 ��� M �� �� SPC5X ��� �0 �0 �� ��.� USC5X �� ��

� ISC6X M �0 × ��0 ASC6X ��� �0� M �0 �� SPC6X �0� �0 �� ��� ��.� USC6X �� ��

� ISC7X M �� × ��0 ASC7X ��� ��� M �� �0 SPC7X ��0 �0 �� ��� �0.� USC7X �� ��

� ISC8X M �0 × �00 ASC8X ��0 ��0 M �0 �� SPC8X ��0 ��0 �� ��� ��.� USC8X �� ��

�) The use of stacking screws necessitates the use of locking plates in the construction assembly!�) When assemblying solid rubber clamps, covering plates, he×agon screws and locking washers must be used. Metal parts also available in stainless steel.

DIN ���

Page 44: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series C – Complete range (Continued)

Tube clamps

Tube clamps series C – Complete range

Polypropylene – RCP Inside smooth – RCPG1) Polyamide � – RCN Rubber – RCVR* Aluminium – RCA

(As required please exchange standard abbreviation RCP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

� RCP1–106 RCP2–106 � �/�� RCP1–108 RCP2–108 �0 G �/� RCP1–110 RCP2–110 �� RCP1–112 RCP2–112 ��.� �/� RCP1–112.7 RCP2–112.7 � ��.� G �/� RCP1–113.5 RCP2–113.5 �� RCP1–114 RCP2–114 �� RCP1–115 RCP2–115 �� �/� RCP1–116 RCP2–116 ��.� G �/� RCP1–117.2 RCP2–117.2 �� RCP1–118 RCP2–118 �� �/� RCP1–219 RCP2–219 �0 RCP1–220 RCP2–220 ��.� G �/� RCP1–221.3 RCP2–221.3 �� RCP1–222 RCP2–222 � �� RCP1–223 RCP2–223 �� � RCP1–225 RCP2–225 ��.� G �/� RCP1–226.9 RCP2–226.9 �� RCP1–228 RCP2–228 �0 RCP1–230 RCP2–230 �0 RCP1–330 RCP2–330 �� ��/� RCP1–332 RCP2–332 ��.� G � RCP1–333.7 RCP2–333.7 � �� RCP1–335 RCP2–335 �� ��/� RCP1–338 RCP2–338 �0 RCP1–340 RCP2–340 �� G ��/� RCP1–342 RCP2–342 �� ��/� RCP1–438 RCP2–438 �0 RCP1–440 RCP2–440 �� G ��/� RCP1–442 RCP2–442 �� RCP1–445 RCP2–445 ��.� G ��/� RCP1–448.3 RCP2–448.3 �0 RCP1–450 RCP2–450 � �� � RCP1–451 RCP2–451 �� RCP1–452 RCP2–452 �� RCP1–455 RCP2–455 �� ��/� RCP1–457 RCP2–457 �0.� G � RCP1–460.3 RCP2–460.3 �� ��/� RCP1–463 RCP2–463 �� RCP1–465 RCP2–465 �0 RCP1–470 RCP2–470

Continuation see next page …

� clamp halves, weld plate, cover plate, hex. head bolt

SSC…

DPC…

RCP…

APC…

� clamp halves, weld plate, cover plate, socket head bolt

ISC…

DPC…

RCP…

APC…

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

�0 RCP1–570 RCP2–570 �� RCP1–573 RCP2–573 �� RCP1–575 RCP2–575 � ��.� G ��/� � RCP1–576.1 RCP2–576.1 �0 RCP1–580 RCP2–580 ��.� ��/� RCP1–582.5 RCP2–582.5 ��.� G � ��/� RCP1–588.9 RCP2–588.9 �0 RCP1–590 RCP2–590 �0 RCP1–690 RCP2–690 �� RCP1–697 RCP2–697 �00 RCP1–6100 RCP2–6100 � �0�.� G ��/� � RCP1–6101.6 RCP2–6101.6 �0� ��/� RCP1–6108 RCP2–6108 ���.� G � ��/� RCP1–6114.3 RCP2–6114.3 ��� � RCP1–6127 RCP2–6127 ��� � RCP1–7127 RCP2–7127 ��� ��/� RCP1–7133 RCP2–7133 ��0 G � ��/� RCP1–7140 RCP2–7140 � ��0 RCP1–7150 RCP2–7150 ���.� G ��/� � RCP1–7152.4 RCP2–7152.4 ��� � �/� RCP1–7159 RCP2–7159 ���.� G � � �/� RCP1–7165.1 RCP2–7165.1 ���.� ��/� RCP1–7168.3 RCP2–7168.3 ���.� � �/� RCP1–8168.3 RCP2–8168.3 ���.� � RCP1–8177.8 RCP2–8177.8 � ���.� ��/� RCP1–8193.7 RCP2–8193.7 �0� RCP1–8203 RCP2–8203 ���.� G � ��/� RCP1–8219.1 RCP2–8219.1 ��0 RCP1–8220 RCP2–8220

Delivery in unassembled individual components.�) Only sizes �–�* Only with cover plate, hexagon screws and locking washers (only sizes �–�).

Polypropylene – RCP Inside smooth – RCPG1) Polyamide � – RCN Rubber – RCVR* Aluminium – RCA

(As required please exchange standard abbreviation RCP in column for “Order code”)

� clamp halves, weld plate, cover plate, hex. head bolt

SSC…

DPC…

RCP…

APC…

� clamp halves, weld plate, cover plate, socket head bolt

ISC…

DPC…

RCP…

APC…

Page 45: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series C – Complete range (Continued)

Tube clamps

Tube clamps series C – Complete range

Polypropylene – RCP Inside smooth – RCPG1) Polyamide � – RCN Rubber – RCVR* Aluminium – RCA

(As required please exchange standard abbreviation RCP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code Order code

� RCP3–106 RCP4–106 RCP5–106 � �/�� RCP3–108 RCP4–108 RCP5–108 �0 G �/� RCP3–110 RCP4–110 RCP5–110 �� RCP3–112 RCP4–112 RCP5–112 ��.� �/� RCP3–112.7 RCP4–112.7 RCP5–112.7 � ��.� G �/� RCP3–113.5 RCP4–113.5 RCP5–113.5 �� RCP3–114 RCP4–114 RCP5–114 �� RCP3–115 RCP4–115 RCP5–115 �� �/� RCP3–116 RCP4–116 RCP5–116 ��.� G �/� RCP3–117.2 RCP4–117.2 RCP5–117.2 �� RCP3–118 RCP4–118 RCP5–118 �� �/� RCP3–219 RCP4–219 RCP5–219 �0 RCP3–220 RCP4–220 RCP5–220 ��.� G �/� RCP3–221.3 RCP4–221.3 RCP5–221.3 �� RCP3–222 RCP4–222 RCP5–222 � �� RCP3–223 RCP4–223 RCP5–223 �� � RCP3–225 RCP4–225 RCP5–225 ��.� G �/� RCP3–226.9 RCP4–226.9 RCP5–226.9 �� RCP3–228 RCP4–228 RCP5–228 �0 RCP3–230 RCP4–230 RCP5–230 �0 RCP3–330 RCP4–330 RCP5–330 �� ��/� RCP3–332 RCP4–332 RCP5–332 ��.� G � RCP3–333.7 RCP4–333.7 RCP5–333.7 � �� RCP3–335 RCP4–335 RCP5–335 �� ��/� RCP3–338 RCP4–338 RCP5–338 �0 RCP3–340 RCP4–340 RCP5–340 �� G ��/� RCP3–342 RCP4–342 RCP5–342 �� ��/� RCP3–438 RCP4–438 RCP5–438 �0 RCP3–440 RCP4–440 RCP5–440 �� G ��/� RCP3–442 RCP4–442 RCP5–442 �� RCP3–445 RCP4–445 RCP5–445 ��.� G ��/� RCP3–448.3 RCP4–448.3 RCP5–448.3 �0 RCP3–450 RCP4–450 RCP5–450 � �� � RCP3–451 RCP4–451 RCP5–451 �� RCP3–452 RCP4–452 RCP5–452 �� RCP3–455 RCP4–455 RCP5–455 �� ��/� RCP3–457 RCP4–457 RCP5–457 �0.� G � RCP3–460.3 RCP4–460.3 RCP5–460.3 �� ��/� RCP3–463 RCP4–463 RCP5–463 �� RCP3–465 RCP4–465 RCP5–465 �0 RCP3–470 RCP4–470 RCP5–470

Continuation see next page …

� clamp halves, rail nuts, cover plate, hex. head bolts

SSC…

DPC…

RCP…

TMC…

� clamp halves, rail nuts, cover plate, socket head bolts

ISC…

DPC…

RCP…

TMC…

� clamp halves, locking plate, stacking bolts

SPC…

ASC…

RCP…

clamp size Tube O.D. mm Tube NB Tube O.D. Order code

�0 RCP5–570 �� RCP5–573 �� RCP5–575 � ��.� G ��/� � RCP5–576.1 �0 RCP5–580 ��.� ��/� RCP5–582.5 ��.� G � ��/� RCP5–588.9 �0 RCP5–590 �0 RCP5–690 �� RCP5–697 �00 RCP5–6100 � �0�.� G ��/� � RCP5–6101.6 �0� ��/� RCP5–6108 ���.� G � ��/� RCP5–6114.3 ��� � RCP5–6127 ��� � RCP5–7127 ��� ��/� RCP5–7133 ��0 G � ��/� RCP5–7140 � ��0 RCP5–7150 ���.� G ��/� � RCP5–7152.4 ��� � �/� RCP5–7159 ���.� G � � �/� RCP5–7165.1 ���.� ��/� RCP5–7168.3 ���.� � �/� RCP5–8168.3 ���.� � RCP5–8177.8 � ���.� ��/� RCP5–8193.7 �0� RCP5–8203 ���.� G � ��/� RCP5–8219.1 ��0 RCP5–8220

Delivery in unassembled individual components.�) Only sizes �–�* Only with cover plate, hexagon screws and locking washers (only sizes �–�).

Polypropylene – RCP Inside smooth – RCPG1) Polyamide � – RCN Rubber – RCVR* Aluminium – RCA

(As required please exchange standard abbreviation RCP in column for “Order code”)

� clamp halves, locking plate, stacking bolts

SPC…

ASC…

RCP…

Page 46: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube clamps

Tube clamps series C – Complete range (Continued)

Tube clamps

Tube clamps series C – Complete range

Polypropylene – RCPD Inside smooth – RCPDG1) Polyamide � – RCND Rubber – RCVDR* Aluminium – RCAD

(As required please exchange standard abbreviation RCP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

� RCPD1–106 RCPD2–106 � �/�� RCPD1–108 RCPD2–108 �0 G �/� RCPD1–110 RCPD2–110 �� RCPD1–112 RCPD2–112 ��.� �/� RCPD1–112.7 RCPD2–112.7 � ��.� G �/� RCPD1–113.5 RCPD2–113.5 �� RCPD1–114 RCPD2–114 �� RCPD1–115 RCPD2–115 �� �/� RCPD1–116 RCPD2–116 ��.� G �/� RCPD1–117.2 RCPD2–117.2 �� RCPD1–118 RCPD2–118 �� �/� RCPD1–219 RCPD2–219 �0 RCPD1–220 RCPD2–220 ��.� G �/� RCPD1–221.3 RCPD2–221.3 �� RCPD1–222 RCPD2–222 � �� RCPD1–223 RCPD2–223 �� � RCPD1–225 RCPD2–225 ��.� G �/� RCPD1–226.9 RCPD2–226.9 �� RCPD1–228 RCPD2–228 �0 RCPD1–230 RCPD2–230 �0 RCPD1–330 RCPD2–330 �� ��/� RCPD1–332 RCPD2–332 ��.� G � RCPD1–333.7 RCPD2–333.7 � �� RCPD1–335 RCPD2–335 �� ��/� RCPD1–338 RCPD2–338 �0 RCPD1–340 RCPD2–340 �� G ��/� RCPD1–342 RCPD2–342 �� ��/� RCPD1–438 RCPD2–438 �0 RCPD1–440 RCPD2–440 �� G ��/� RCPD1–442 RCPD2–442 �� RCPD1–445 RCPD2–445 ��.� G ��/� RCPD1–448.3 RCPD2–448.3 �0 RCPD1–450 RCPD2–450 � �� � RCPD1–451 RCPD2–451 �� RCPD1–452 RCPD2–452 �� RCPD1–455 RCPD2–455 �� ��/� RCPD1–457 RCPD2–457 �0.� G � RCPD1–460.3 RCPD2–460.3 �� ��/� RCPD1–463 RCPD2–463 �� RCPD1–465 RCPD2–465 �0 RCPD1–470 RCPD2–470

Continuation see next page …

� clamp halves, double weld plate, double cover plate, hex. head bolts

SSC…

DPDC…

RCPD… (=2XRCP…)

APDC…

� clamp halves, double weld plate, double cover plate, socket head bolts

ISC…

DPDC…

RCPD… (=2XRCP…)

APDC…

� clamp halves, double weld plate, double cover plate, hex. head bolts

SSC…

DPDC…

RCPD… (=2XRCP…)

APDC…

� clamp halves, double weld plate, double cover plate, socket head bolts

ISC…

DPDC…

RCPD… (=2XRCP…)

APDC…

Polypropylene – RCPD Inside smooth – RCPDG1) Polyamide � – RCND Rubber – RCVDR* Aluminium – RCAD

(As required please exchange standard abbreviation RCP in column for “Order code”)

clamp size Tube O.D. mm Tube NB Tube O.D. Order code Order code

�0 RCPD1–570 RCPD2–570 �� RCPD1–573 RCPD2–573 �� RCPD1–575 RCPD2–575 � ��.� G ��/� � RCPD1–576.1 RCPD2–576.1 �0 RCPD1–580 RCPD2–580 ��.� ��/� RCPD1–582.5 RCPD2–582.5 ��.� G � ��/� RCPD1–588.9 RCPD2–588.9 �0 RCPD1–590 RCPD2–590 �0 RCPD1–690 RCPD2–690 �� RCPD1–697 RCPD2–697 �00 RCPD1–6100 RCPD2–6100 � �0�.� G ��/� � RCPD1–6101.6 RCPD2–6101.6 �0� ��/� RCPD1–6108 RCPD2–6108 ���.� G � ��/� RCPD1–6114.3 RCPD2–6114.3 ��� � RCPD1–6127 RCPD2–6127 ��� � RCPD1–7127 RCPD2–7127 ��� ��/� RCPD1–7133 RCPD2–7133 ��0 G � ��/� RCPD1–7140 RCPD2–7140 � ��0 RCPD1–7150 RCPD2–7150 ���.� G ��/� � RCPD1–7152.4 RCPD2–7152.4 ��� � �/� RCPD1–7159 RCPD2–7159 ���.� G � � �/� RCPD1–7165.1 RCPD2–7165.1 ���.� ��/� RCPD1–7168.3 RCPD2–7168.3 ���.� � �/� RCPD1–8168.3 RCPD2–8168.3 ���.� � RCPD1–8177.8 RCPD2–8177.8 � ���.� ��/� RCPD1–8193.7 RCPD2–8193.7 �0� RCPD1–8203 RCPD2–8203 ���.� G � ��/� RCPD1–8219.1 RCPD2–8219.1 ��0 RCPD1–8220 RCPD2–8220

Delivery in unassembled individual components.�) Only sizes �–�* Only with cover plate, hexagon screws and locking washers (only sizes �–�).

Page 47: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

Clamp size

Tube O.D.mm

Absorbing plate

Weld plate

Bolt ISO �0�� H� H� H� H� H� H� H� H� H�

1

�.0

DPEC�X APCD�X M�0X�� �� �� �� �� � �0 �� �0 �

�.0�.�

�0.0��.0��.���.���.0��.0��.0��.���.0

2

��.0

DPEC�X APCD�X M�0X�0 �0 �� �� �� � �0 �� �� �

�0.0��.���.0��.0��.0��.���.0�0.0

3

�0.0

DPEC�X APCD�X M�0X�0 �� �� �� �� � �0 �0 �00 �

��.0��.���.0��.0�0.0��.0

4

��.0

DPEC�X APCD�X M��X��0 ��� ��� �� �0 � �� �0 ��0 �0

�0.0��.0��.0��.��0.0��.0��.0��.0��.0��.0�0.���.���.0�0.0

Clamp size

Tube O.D.mm

Absorbing plate

Weld plate

Bolt ISO �0�� H� H� H� H� H� H� H� H� H�

5

�0.0

DPEC�X APCD�X M��X��0 ��� ��� �0 �� � �0 ��� ��0 �0

��.0��.0��.��0.0��.���.��0.0

6

�0.0

DPEC�X APCD�X M�0X��0 �0� ��� ��� �0 �� �0 ��� ��� ��

��.0�00.0�0�.��0�.0���.����.0

7

���.0

DPEC�X APCD�X M��X��0 ��0 ��� ��� �0 �� �0 �0� ��0 ��

��0.0���.0��0.0���.���0.0���.����.0���.����,�

8

���.�

DPEC�X APCD�X M�0X��0 ��� �0� ��� �0 �� ��0 ��� ��0 ��

���.����.��0�.0���.���0.0

�0 ��

Tube clamps

Tube clamp series C with absorbing noise insert

Tube clamps

Tube clamp series C with absorbing noise insert

Page 48: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tubes

Tube clamps

Page 49: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

�� ��

Tube

P [bar]Weightkg/m

Order code

DIN ���� I DIN ���� III Cr(VI)-freePhosphated

and oiled��x�.0 ��� ��� �.�� R25X3.0ST52CF R25X3.0ST52��x�.0 ��� ��� �.0� R25X4.0ST52CF R25X4.0ST52�0x�.0 ��� ��� �.�� R30X4.0ST52CF R30X4.0ST52�0x�.0 ��0 ��� �.0� R30X5.0ST52CF R30X5.0ST52��x�.0 ��� �0� �.�� R38X4.0ST52CF R38X4.0ST52��x�.0 ��� ��� �.0� R38X5.0ST52CF R38X5.0ST52��x�.0 ��� ��0 �.�� R38X6.0ST52CF R38X6.0ST52��x�.0 �0� ��� �.�� R42X5.0ST52CF R42X5.0ST52�0x�.0 ��� ��� �.�� R50X3.0ST52CF R50X3.0ST52�0x�.0 ��� ��� �.�� R50X5.0ST52CF R50X5.0ST52�0x�.0 ��� ��� �.�� R50X6.0ST52CF R50X6.0ST52�0x�.0 ��� ��� �.�� R50X8.0ST52CF R50X8.0ST52�0x�.0 ��� ��� �0.�� R60X8.0ST52CF R60X8.0ST52��x�.0 ��� ��� ��.�� R65X8.0ST52CF R65X8.0ST52��x�.� ��� ��� ��.0� R66X8.5ST52CF R66X8.5ST52

��x��.� ��0 ��� ��.�� R75X12.5ST52CF R75X12.5ST52�0x�.0 ��0 ��� �.�0 R80X3.0ST52CF R80X3.0ST52�0x�.0 ��� ��� ��.�� R80X8.0ST52CF R80X8.0ST52

�0x�0.0 ��� ��� ��.�� R80X10.0ST52CF R80X10.0ST52��x��.0 ��� ��� ��.�� R88X14.0ST52CF R88X14.0ST52

Seamless steel tubes

Tubes

Material E���N (St. ��.�NBK)

Working pressure table acc. to DIN ����-I and DIN ����-IIITolerances DIN EN �0�0�-� (old DIN ����) and ISO ��0�Tube calculation basics see left

Other dimensions on request

Tubes

Tube calculation

DIN ���� I, only for static load

Calculation of working pressure of steel tubes for static stress up to ��0 °C. Corrosion – additional allowances are not considered for the calculation of pressures. Tubes with a diameter of OD/ID > � are calculated for static stress in accordance with DIN ���� III, but with K = yield strength.

DIN ���� III, for dynamic load

Calculation of working pressure of steel tubes for dynamic stress up to ��0 °C. Corrosion – additional allowances are not considered for the calculation of pressures.

Formula:

P = permissible working pressure [bar]K = yield strength [N/mm�]s = tube wall thickness [mm]c = factor for wall thickness allowance

= 0.� for Tube-OD � – �, 0.�� for Tube-OD � – �, 0.� for Tube-OD �0 – ��0 = 0.� for all stainless steel tubes

S = Design factor = �.�D = tube outside diameter [mm]

Formula

P = permissible working pressure [bar]K = fatigue strength [N/mm�]s = tube wall thickness [mm]c = factor for wall thickness allowance

= 0.� for Tube-OD � – �, 0.�� for Tube-OD � – �, 0.� for Tube-OD �0 – �0 = 0.� for all stainless steel tubes

S = Design factor = �.�D = tube outside diameter [mm]

P = �0 x K x s x c

S x D

P = �0 x K x s x c

S x (D + s x c)

Material specifications

E��� (St��.�) acc. to DIN EN �0�0�-�

Tensile strength min ��0 N/mm�

Yield strength min ��� N/mm�

Fatigue strength ��� N/mm� �)

Elongation at break min. �� %

�.���� cold drawn (CFA) acc. to DIN EN �0���-� (���Ti)

Tensile strength min �00 N/mm�

0.�% proof stress min ��0 N/mm�

�% proof stress min ��� N/mm�

Fatigue strength ��0 N/mm� �)

Elongation at break min. �� %�) mhp statement ���� �) Rollof/Matek ME Ausg. ��, (no standard specification)

Page 50: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

��

Notes

AEROSPACEKey Markets• Aircraft engines• Business & general aviation• Commercial transports• Land-based weapons systems• Military aircraft• Missiles & launch vehicles• Regional transports• Unmanned aerial vehicles

Key Products• Flight control systems

& components• Fluid conveyance systems• Fluid metering delivery

& atomization devices• Fuel systems & components• Hydraulic systems & components• Inert nitrogen generating systems• Pneumatic systems & components• Wheels & brakes

CLIMATE CONTROLKey Markets• Agriculture• Air conditioning• Food, beverage & dairy• Life sciences & medical• Precision cooling• Processing• Transportation

Key Products• CO2 controls• Electronic controllers• Filter driers• Hand shut-off valves• Hose & fittings• Pressure regulating valves• Refrigerant distributors• Safety relief valves• Solenoid valves• Thermostatic expansion valves

FILTRATIONKey Markets• Food & beverage• Industrial machinery• Life sciences• Marine• Mobile equipment• Oil & gas• Power generation• Process• Transportation

Key Products• Analytical gas generators• Compressed air & gas filters• Condition monitoring• Engine air, fuel & oil filtration

& systems• Hydraulic, lubrication &

coolant filters• Process, chemical, water

& microfiltration filters• Nitrogen, hydrogen & zero

air generators

ELECTROMECHANICALKey Markets• Aerospace• Factory automation• Life science & medical• Machine tools• Packaging machinery• Paper machinery• Plastics machinery & converting• Primary metals• Semiconductor & electronics• Textile• Wire & cable

Key Products• AC/DC drives & systems• Electric actuators, gantry robots

& slides • Electrohydrostatic actuation systems• Electromechanical actuation systems• Human machine interface• Linear motors• Stepper motors, servo motors,

drives & controls• Structural extrusions

PNEUMATICSKey Markets• Aerospace• Conveyor & material handling• Factory automation• Life science & medical• Machine tools• Packaging machinery• Transportation & automotive

Key Products• Air preparation• Brass fittings & valves• Manifolds• Pneumatic accessories• Pneumatic actuators & grippers• Pneumatic valves & controls• Quick disconnects• Rotary actuators• Rubber & thermoplastic hose

& couplings• Structural extrusions• Thermoplastic tubing & fittings• Vacuum generators, cups & sensors

FLUID & GAS HANDLINGKey Markets• Aerospace• Agriculture• Bulk chemical handling• Construction machinery• Food & beverage• Fuel & gas delivery• Industrial machinery• Mobile• Oil & gas• Transportation• Welding

Key Products• Brass fittings & valves• Diagnostic equipment• Fluid conveyance systems• Industrial hose• PTFE & PFA hose, tubing &

plastic fittings• Rubber & thermoplastic hose

& couplings• Tube fittings & adapters• Quick disconnects

HYDRAULICSKey Markets• Aerospace• Aerial lift• Agriculture• Construction machinery• Forestry• Industrial machinery• Mining• Oil & gas• Power generation & energy• Truck hydraulics

Key Products• Diagnostic equipment• Hydraulic cylinders

& accumulators• Hydraulic motors & pumps• Hydraulic systems• Hydraulic valves & controls• Power take-offs • Rubber & thermoplastic hose

& couplings• Tube fittings & adapters• Quick disconnects

PROCESS CONTROLKey Markets• Chemical & refining• Food, beverage & dairy• Medical & dental• Microelectronics• Oil & gas• Power generation

Key Products• Analytical sample conditioning

products & systems• Fluoropolymer chemical delivery

fittings, valves & pumps• High purity gas delivery fittings,

valves & regulators• Instrumentation fittings, valves

& regulators• Medium pressure fittings & valves• Process control manifolds

SEALING & SHIELDINGKey Markets• Aerospace• Chemical processing• Consumer• Energy, oil & gas• Fluid power• General industrial• Information technology• Life sciences• Military• Semiconductor• Telecommunications• Transportation

Key Products• Dynamic seals• Elastomeric o-rings • EMI shielding• Extruded & precision-cut,

fabricated elastomeric seals• Homogeneous & inserted elastomeric

shapes• High temperature metal seals• Metal & plastic retained composite

seals• Thermal management

Parker’s Motion & Control TechnologiesAt Parker, we’re guided by

a relentless drive to help

our customers become more

productive and achieve

higher levels of profitability

by engineering the best sys-

tems for their requirements.

It means looking at customer

applications from many

angles to find new ways to

create value. Whatever the

motion or control technology

need, Parker has the experi-

ence, breadth of product and

global reach to consistently

deliver. No company knows

more about motion and con-

trol technology than Parker.

For further information call

00800 27 27 5374

Page 51: HPF – Parker High Performance Flange System · 2012-10-23 · HPF – Parker High Performance Flange System the tear out-proof flange system for high pressure applications HPF –

Edition: June �00�/BUL/����/UK k-konzept/PlantijnCasparie

Your local authorized Parker distributor

© �00� Parker Hannifin Corporation. All rights reserved.

AE – UAE, Dubai Tel: +��� � �����00 [email protected]

AR – Argentina, Buenos Aires Tel: +�� ���� �� ����

AT – Austria, Wiener Neustadt Tel: +�� (0)���� ���0�-0 [email protected]

AT – Eastern Europe, Wiener Neustadt Tel: +�� (0)���� ���0� ��0 [email protected]

AU – Australia, Castle Hill Tel: +�� (0)�-���� ����

AZ – Azerbaijan, Baku Tel: +��� �0 ���� ��� [email protected]

BE/LU – Belgium, Nivelles Tel: +�� (0)�� ��0 �00 [email protected]

BR – Brazil, Cachoeirinha RS Tel: +�� �� ���0 ����

BY – Belarus, Minsk Tel: +��� �� �0� ���� [email protected]

CA – Canada, Milton, Ontario Tel: +� �0� ��� �000

CH – Switzerland, Etoy Tel: +�� (0) �� ��� 0� �0 [email protected]

CN – China, Shanghai Tel: +�� �� �0�� ����

CZ – Czech Republic, Klecany Tel: +��0 ��� 0�� ��� [email protected]

DE – Germany, Kaarst Tel: +�� (0)���� �0�� 0 [email protected]

DK – Denmark, Ballerup Tel: +�� �� �� 0� 00 [email protected]

ES – Spain, Madrid Tel: +�� �0� �� 00 0� [email protected]

FI – Finland, Vantaa Tel: +��� (0)�0 ��� ��00 [email protected]

FR – France, Contamine s/Arve Tel: +�� (0)� �0 �� �0 �� [email protected]

GR – Greece, Athens Tel: +�0 ��0 ��� ���0 [email protected]

HK – Hong Kong Tel: +��� ���� �00�

HU – Hungary, Budapest Tel: +�� � ��0 ���� [email protected]

IE – Ireland, Dublin Tel: +��� (0)� ��� ���0 [email protected]

IN – India, Mumbai Tel: +�� �� ���� �0��-��

IT – Italy, Corsico (MI) Tel: +�� 0� �� �� �� [email protected]

JP – Japan, Tokyo Tel: +(��) � ��0� ��0�

KR – South Korea, Seoul Tel: +�� � ��� 0�00

KZ – Kazakhstan, Almaty Tel: +� ���� �0� �00 [email protected]

LV – Latvia, Riga Tel: +��� � ��� ��0� [email protected]

MX – Mexico, Apodaca Tel: +�� �� ���� �000

MY – Malaysia, Subang Jaya Tel: +�0 � ���� ����

NL – The Netherlands, Oldenzaal Tel: +�� (0)��� ��� 000 [email protected]

NO – Norway, Ski Tel: +�� �� �� �0 00 [email protected]

NZ – New Zealand, Mt Wellington Tel: +�� � ��� ����

PL – Poland, Warsaw Tel: +�� (0)�� ��� �� 00 [email protected]

PT – Portugal, Leca da Palmeira Tel: +��� �� ��� ���0 [email protected]

RO – Romania, Bucharest Tel: +�0 �� ��� ���� [email protected]

RU – Russia, Moscow Tel: +� ��� ���-���� [email protected]

SE – Sweden, Spånga Tel: +�� (0)� �� �� �0 00 [email protected]

SG – Singapore Tel: +�� ���� ��00

SK – Slovakia, Banská Bystrica Tel: +��� ��� ��� ��� [email protected]

SL – Slovenia, Novo Mesto Tel: +��� � ��� ���0 [email protected]

TH – Thailand, Bangkok Tel: +��� ��� ���0

TR – Turkey, Istanbul Tel: +�0 ��� ����0�� [email protected]

TW – Taiwan, Taipei Tel: +��� � ���� ����

UA – Ukraine, Kiev Tel +��0 �� ��� ���� [email protected]

UK – United Kingdom, Warwick Tel: +�� (0)���� ��� ��� [email protected]

US – USA, Cleveland Tel: +� ��� ��� �000

VE – Venezuela, Caracas Tel: +�� ��� ��� ����

ZA – South Africa, Kempton Park Tel: +�� (0)�� ��� 0�00 [email protected]

Parker Worldwide

European Product Information Centre

Free phone: 00 800 27 27 5374

(from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE,

IT, PT, SE, SK, UK)