Item 1 of 50Which processors use hyperthreading? (Select two.)

A. Intel single core processors

B. AMD dual core processors

C. AMD quad core processors

D.

Item 2 of 50How many memory channels are there in a 2 processor DDR3-based server?

A. 2 channels

B.

C.

D. 6 channels

Item 3 of 50

A. processor socket

B. processor core

C. HyperTransport Bus

D. Front Side Bus

Item 4 of 50

A. chipset

B. PCI-e cards

C. hard drives

Intel dual core processors

3 channels

4 channels

On Intel Xeon 5500 Series (Nehalem) based servers, where is the memory controller located?

Which components are under the control of Dynamic Power Management on Intel Xeon 5500 Series (Nehalem) based servers? (Select two.)

C. hard drives

D. CPU

E. fans

Item 5 of 50

A. 292GB

B. 438GB

C. 584GB

D. 730GB

Item 6 of 50Which operating system has support for the ZFS filesystem?

A. Sun Solaris

B. Windows Server 2008 R2 x64 Enterprise Edition

C. Novell NetWare 6.5

D. Novell SLES 10

Item 7 of 50

A. Extreme Digital (xD)

B. Secure Digital (SD)

C. Compact Flash (CF)

D. PCI-express (PCIe)

Item 8 of 50

A server has four disks, each 146GB in size. They are configured as RAID 5. What is the logical drive size presented to the operating system?   

Which type of internal slot has been added to HP ProLiant G6-based servers for use by hypervisors?

A. extreme performance

B.

C. turbo boost performance

D.

Item 9 of 50In which log are Array POST errors recorded?

A. Windows Event Log

B.

C. IPMI Log

D. Onboard Administrator Log

Item 10 of 50What information does the ADU provide? (Select three.)

A.

B.

C. RAID stripe size

D.

E.

Item 11 of 50

A. ability to spin down idle disk drives

B. ability to put CPU sockets to sleep and wake up real time

C. ability to power down unused PCI-e slots

For the Intel x5570 Series processors in the HP ProLiant SL2x170z G6, what does the letter "x" preceding the processor model number indicate?

lower wattage

high performance/wattage

Integrated Management Log 

firmware version 

OEM hard drive vendor 

Hardware Error Logs

Smart Array driver version

Which capability is a key improvement in HP ProLiant G6 servers using Dynamic Power Management? 

C. ability to power down unused PCI-e slots

D. ability to put CPU cores to sleep and wake up real time

Item 12 of 50

A. dedicated 2GB RAM

B. quad-core CPU

C. QuickPath architecture

D. internal PCI-X 2.0

Item 13 of 50

A. RAID 1+0

B. RAID 5

C.

D. RAID 5+0

Item 14 of 50

A. power and thermal optimization

B. automated firmware upgrade

C. extended health monitoring

D. TPM module management

Item 15 of 50

What is required to support each installed HP 10Gb network adapter in a ProLiant server?

Which RAID level does Smart Array Advanced Pack (SAAP) employ to enhance performance, reliability and availability?

RAID 6+0  

Which key functions are under the control of the new ProLiant OnBoard Administrator found in every ProLiant G6 server? (Select two.)

A customer has an HP ProLiant G6 server, which meets the minimum requirements of 4 disks. They have purchased the Smart Array Advanced Pack. The customer complains that RAID 6 is not displayed as an option in ORCA. 

A. The license key must be entered in RBSU.

B. The license key must be activated over the Internet.

C.

D.

Item 17 of 50

A.

B.

C.

D.

E.

Item 16 of 50What is a function of the UPS management module?

A.

B.

C.

D. provides automatic voltage regulation

Item 18 of 50

A.

B.

What must be done to correct the problem?  

The license key must be entered in ORCA. 

The license key must be entered in iLO RBSU.

On ProLiant G6 servers, which statements are true about System Maintenance Utility? (Select two.)

Array Diagnostic Utility is part of System Maintenance Menu options.Diagnostic Utility is not part of System Maintenance Menu options.You can run memory tests from System Maintenance Utility.

You cannot access RBSU through System Maintenance Menu Utility.You can access RBSU through System Maintenance Menu Utility.

receives traps from HP SIM

sends email notification messages

manages the number and size of the text logs stored

The system board of a DL380 G6 Server has failed. What should be done with the Trusted Platform Module (TPM) that was installed and in use?

The TPM needs to be reinitialized and then reinstalled onto the new motherboard.TPM firmware revisions must be synchronized with the system board. 

C. The TPM module must be replaced with the motherboard.

D.

Item 19 of 50Which utilities can you use to change the bootable media sequence? (Select two.)

A. System Maintenance Menu

B. RBSU

C. SMH

D.

E. Insight Diagnostic CD

Item 20 of 50What is the minimum number of hard disks required for RAID 6?

A. 2

B. 4

C. 6

D. 8

Item 21 of 50

A. RAID 0

B. RAID 1

C. RAID 5

D. RAID 6

The TPM must be reinstalled on the new motherboard after the new motherboard has been flashed to the most current BIOS.

Option ROM Configuration for Arrays

You install a DL380 G6 Server with six disks. Your customer wants to have the maximum disk space available but still have protection against a disk failure. Which RAID level should you recommend?

Item 22 of 50

A. iLO 2

B. ORCA

C. ACU

D. RBSU

Item 23 of 50

A. RAID 0

B. RAID 1

C. RAID 5

D. RAID 6

Item 24 of 50

A.

B.

C.

D. HP SAS expander card and second internal drive cage

Item 25 of 50

A. ORCA

B. ADU

Which HP utility should you use to perform online RAID migration?

You install a DL380 G6 Server with six disks. Your customer wants maximum protection against a disk failure. Which RAID level should you recommend to withstand two simultaneous drive failures in a single array?

Your customer requires a cost-effective external storage solution with 20 hard drives for their DL380 G6 Server. Which solution should you recommend?

HP Smart Array P411 and HP StorageWorks 70 Modular Smart ArrayHP Smart Array P410 and HP StorageWorks 70 Modular Smart ArrayHP Smart Array P800 and HP StorageWorks 50 Modular Smart Array

What is used to add a hot spare drive to an array on a Smart Array 410i Controller? (Select two.)

B. ADU

C. ACU

D. SMU

E. RBSU

Item 26 of 50

A. The server continues using the original ROM version.

B.

C. The server must be reloaded with the original ROM version.

D.

Item 27 of 50

A. Implement preventive measures

B. Develop an action plan

C. Evaluate data

D. Execute an action plan

A complete power failure occurs during a system ROM upgrade on a ProLiant DL380 G6. What happens when the server is restarted?

The server stops during POST and prompts to continue the upgrade.

The server restarts using the updated ROM version.

Your customer's server failed. You have followed the HP Six Step Troubleshooting Methodology and have determined that the problem, a defective power supply, is fixed. You recommend to your customer that they install a redundant power supply to help prevent further downtime.

Which step of the HP Troubleshooting Methodology are you implementing?

Item 29 of 50What provides a view of server health information?

A. ACU

B. ADU

C. SMH

D. Firmware Maintenance CD

Item 30 of 50Where do you access the IPMI Event Log on 100 Series servers?

A. Integrated Management Log (IML)

B. SmartStart CD

C. RBSU

D. HP Insight Diagnostics

Item 31 of 50Where can you view hardware failure events in ProLiant 300/600/700 Series servers?

A. Firmware Maintenance CD

B. ORCA

C.

D. RBSU

Item 32 of 50Beep codes are one of the first indications of a failure. What do they indicate?

A.

B.

C.

D.

Item 33 of 50

A. % Processor Time

B.

C.

D.

Item 34 of 50When should a field engineer escalate a service call?

A.

B.

C.

D.

Integrated Management Log (IML)

The Smart Array has a failed disk.

The redundant power supply has failed.

The processor has unsupported wattage. 

The passive processor fan has failed.

What is a useful counter in the Processor category of Microsoft's Performance Monitor for evaluating the processor subsystem?

% Processer Tasks

% Cache Writes

% Tag Queues 

after you have been onsite more than one hour

after three major hardware components have been replaced and the problem is unresolvedwhen you cannot run Insight Diagnostics

when the current action plan does not meet the customer’s expectations

Item 35 of 50

A.

B.

C. Implement preventive measures

D.

E. Collect data

Item 36 of 50

A. Collect data

B. Determine if the problem is solved

C. Implement preventive measures

D. Evaluate data

E. Develop an optimized action plan

Item 37 of 50

A.

B.

C.

D.

E.

You replaced the memory module in a ProLiant server and the amber LED from Insight Display disappeared. You run an Insight Diagnostics Offline Edition Utility from the SmartStart CD and started the complete memory test.

According to HP Troubleshooting Methodology, which step did you perform?

Evaluate data

Determine if problem is solved

Execute the action plan

You just executed a step from your action plan. What is the next step you should take according to HP Troubleshooting Methodology?

How can you update the Version Control Repository Manager (VCRM) database? (Select two.)

Manually update it from the Management DVD.

Use the Upload to VCRM feature of the VCRM Update CD.

Manually download the software from the HP website into the repository.Manually copy updates from the SmartStart CD.

Use the Repository Auto Update feature in HP SIM.

Item 38 of 50Which protocol enables block level storage data to be transported over IP networks?

A. SCSI-3

B. iSCSI

C. FCoE

D. Etherchannel

Item 39 of 50Which tool incorporates the ProLiant Integration module?

A. HP Insight Rapid Deployment software (RDP)

B. HP Insight Vulnerability and Patch Manager module (VPM)

C. HP Insight Performance Manager module (PMP)

D. HP Insight Power Manager software (IPM)

Item 40 of 50

A.

B.

C.

D. on a mapped network drive using FAT16/32

Item 41 of 50

A. Run HP Insight Diagnostics Utility (online), using the SMH.

B.

You use the ADU started from the SmartStart CD. You want to send the result for further analysis. Where can you save the file? 

on a CD, burned with the optional CD-burner

on Drive C using NTFS        

on a USB stick

What should you do to test system memory in a ProLiant server? (Select two.)

Run HP Insight Diagnostics Utility (offline), using the Maintain Server button when booting a 8.x SmartStart CD.

B.

C.

D.

Item 42 of 50What does the ProLiant DL160 G6 need for virtual media and virtual KVM?

A.

B. to update the LO100i with the advanced license

C.

D.

Item 43 of 50

A.

B.

C.

D.

Item 44 of 50

A.

B.

C.

D.

Run HP Insight Diagnostics Utility (offline), using the Maintain Server button when booting a 8.x SmartStart CD.Run the HP Integrated Management Log (IML) and choose it in the drop-down menu.Run the embedded Diagnostics Utility on ProLiant servers equipped with 4MB ROM.

to buy an advanced license for the iLO 2 for the ProLiant DL160 G6

nothing since the advanced iLO 2 license is included with this ProLiant DL160 G6nothing since the ProLiant DL160 G6 already has those features available

You are updating the BIOS of a ProLiant DL380 G6. The ProLiant is not protected by a UPS. During the update, the utility power is off for one minute and the firmware update fails. What should you do after the utility power returns? 

You wait for the ProLiant to boot. It will detect the corrupted ROM and will switch to the backup ROM. You can restart your BIOS update.

You replace the system board and restart the BIOS update.

You do a system erase from the SmartStart CD and restart the BIOS update.You start the System Configuration Utility, type Control-A for advanced mode and do a manual BIOS recovery. You then restart the BIOS update.

What can cause an upgrade of the ProLiant Support Pack on a ProLiant server running Microsoft Windows Server 2008 to fail?

An installed hardware component has the Write Protect feature turned on.The  PSP used was for HP-UX and is not compatible with Microsoft Windows Server.Microsoft Windows Server 2008 does not support upgrading PSP but requires a full new installation of PSP.An installed hardware component is not supported by Microsoft or by HP.

D.

Item 45 of 50

A.

B.

C.

D.

Item 46 of 50

A. Reset the systems settings in RBSU.

B.

C. Engage the iLO 2 Security Override Switch procedure.

D.

Item 47 of 50

A.

B.

C.

D.

Item 48 of 50What is the common warranty for ProLiant 300 Series servers?

An installed hardware component is not supported by Microsoft or by HP.

In a support case you have to escalate a problem to the HP Support team. They expect a problem with some out-of-date drivers. What should you do to create a file that can be used to show them the currently installed versions?

Start Survey Utility from the HP SmartStart CD.

Start Survey Utility from within the Online Insight Diagnostics Edition.Start Inspect Utility from the Server Startup CD. 

Start Embedded Inspect Utility on ProLiants equipped with a 4MB ROM using RBSU.

An administrator cannot log in to iLO 2 using his previously working account. What can solve this login problem?

Use the System Erase Utility to selectively erase the iLO password.

Boot the system with the SmartStart CD and select "Reset Passwords."

You install 16 new 4GB Memory DIMMs on a single processor DL385 G6 that is running Windows 2003 x64 Enterprise Edition. The system only sees 32GB of memory. What is the possible reason?

Firmware must be updated to the latest version to support 64GB memory.DIMM banks are only active when the corresponding processor socket is populated.Windows 2003/2008 x64 Enterprise Edition must be installed to support more than 32GB of memory.You must activate the "Use Memory above 32GB" option in the RBSU.

A.

B. 3 years parts, 3 years labor, 3 years onsite support

C. 1 year parts, 1 year labor, 0 year onsite support

D. 3 years parts, 3 years labor, 0 year onsite support

Item 49 of 50

A. Proactive 24

B. 4-hour 24x7 Same Day

C. 4-hour Same Business Day

D. HP Support Plus

Item 50 of 50What does Proactive 24 Service offer customers?

A. Proactive Reporting for predictive failures

B. pre-failure hardware services

C.

D.

1 year parts, 1 year labor, 1 year onsite support

You have a customer that wants support that includes software technical assistance and 4-hour hardware response time. Which service provides this?

7x24 warranty coverage 

2-hour software and 4-hour onsite