HP0-A01.pdf

HP HP0-A01: Practice Exam QUESTION NO: 1 What does the linkloop command test? A. router activity B. Maximum Transmission Unit (MTU) size C. MAC address connectivity between network cards D. loopback address connectivity between network cards Answer: C

QUESTION NO: 2 Which file contains the information sent in response to a bootp request? A. /etc/services B. /etc/bootptab C. /etc/in etd.conf D. /etc/bootp.conf Answer: B

QUESTION NO: 3 Which commands can confirm host name resolution (DNS/Bind) is working correctly? A. whois B. uname C. nsquery D. hostname E. gethostbyname Answer: C

QUESTION NO: 4 What is IP multiplexing on a UNIX host? A. increasing throughput on the network interface B. binding the same IP address to multiple network interface C. binding more than one IP address to a single network interface D. binding more than one MAC address to a single network interface "Pass Any Exam. Any Time." - 100% Guaranteed 2

HP HP0-A01: Practice Exam Answer: C

QUESTION NO: 5 Which tools have been deprecated with the introduction of the nwmgr command? (Select three) A. netstat B. ifconfig C. linkloop D. lanscan E. lanadmin Answer: C,D,E

QUESTION NO: 6 How can you enable only NFS version 4 support on HP-UX 11 i v3? A. HP-UX v3 does not support NFSv4. B. Change the NFSv4 kernel parameter to yes, recompile the kernel and reboot. C. Using only NFSv4 is not supported; NFSv2 and NFSv3 are always enabled. D. Set the configuration parameters NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX to 4. Answer: D

QUESTION NO: 7 Which NFS server file contains a list of clients that currently have the server's NFS file systems mounted? A. /etc/fstab B. /etc/rmtab C. /etc/nfstab D. /etc/mnttab E. /etc/exports Answer: B

QUESTION NO: 8 "Pass Any Exam. Any Time." - 100% Guaranteed 3

HP HP0-A01: Practice Exam What is the length of an IPv4 address? A. 32 bits B. 48 bits C. 64 bits D. 128 bits Answer: A

QUESTION NO: 9 What are the major features of IPFilter on HP-UX 11i v3? (Select three.) A. creates extensive logs B. supports X.25 Interfaces C. installed and enabled by default D. provides a new GUI configuration tool E. supports Network Address Translation (NAT) Answer: A,B,E

QUESTION NO: 10 Which command displays Internet to Ethernet address resolution? A. arp B. lanscan C. ifconfig D. traceroute Answer: A

QUESTION NO: 11 What are the new features offered in NFS version 4? (Select three.) A. integrated security B. asynchronous write support C. integrated file locking support D. simplified firewall configuration E. support for the UDP network transport

"Pass Any Exam. Any Time." - 100% Guaranteed

4

HP HP0-A01: Practice Exam Answer: A,C,D

QUESTION NO: 12 Which feature of HP CIFS allows a Unix uid or gid to be mapped to a Windows account or group? A. nmbd B. smbd C. winbind D. smbclient Answer: C

QUESTION NO: 13 DRAG DROP Click the Task button. Using drag and drop, match each network configuration file with its common definition.

Drag and drop question. Drag the items to the proper locations. Answer:


5

HP HP0-A01: Practice Exam

Explanation:

QUESTION NO: 14 Which file contains the modified configuration values that will be used the next time the cimserver starts? A. cimserver.conf B. cimserver_start.conf C. cimserver_planned.conf D. cimserver_nextboot.conf Answer: C


6

HP HP0-A01: Practice Exam QUESTION NO: 15 Which pair of statements is true when launching a tool using HP System Insight Manager (HP SIM)? A. - authorizations are configured in HP SIM - users are authenticated using PAM on the HP SIM Server B. - authorizations are configured in HP SIM - users are authenticated using HP SIM's internal user database C. - authorizations are configured in Select Access - users are authenticated using HP SIM's internal user database D. - authorizations are derived from operating system login account permissions - users are authenticated using PAM on the HP SIM Server Answer: A

QUESTION NO: 16 What does the pvcreate command create? A. a hard partition B. the physical links C. a physical volume device file D. the Ivm disk resident structures Answer: D

QUESTION NO: 17 Which files control the HP System Management Homepage (SMH) configuration? (Select two.) A. /opt/smh/smh.conf B. /opt/smh/conf/enwars C. /opt/hpsmh/hpsmh.conf D. /opt/hpsmh/lbin/enwars E. /opt/smh/conf/timeout.conf F. /opt/hpsmh/conf/timeout.conf Answer: D,F


HP HP0-A01: Practice Exam The HP-UX System Management Homepage is started using which URL? A. http://hostname B. http://hostname:80 C. http://hostname:2301 D. http://hostname/hpsmh Answer: C

QUESTION NO: 19 Which areas can be locations of system bottlenecks? (Select three.) A. disk B. cpu C. VPMON D. memory E. hard partition size F. graphical interface G. size of filesystems Answer: A,B,D

QUESTION NO: 20 Which commands are recommended to clear the contents an active file called log-file? (Select two.) A. >log-file B. trim log-file " C. freset log-file D. cat /dev/null > log-file Answer: A,D

QUESTION NO: 21 Where are system startup/shutdown scripts located? A. /etc/rc2.d B. /sbin/init.d


8

HP HP0-A01: Practice Exam C. /sbin/config.d D. /etc/rc.config.d Answer: B

QUESTION NO: 22 DRAG DROP Click the Task button. Using drag and drop, match each backup/archive tool with its operation.


Explanation:


9


QUESTION NO: 23 What are benefits of the HP-UX 11i v3 parallel probing of HBAs, targets, and LUNs? (Select two.) A. improved boot time B. improved availability C. improved virtualization D. improved I/O scan time E. improved I/O performance Answer: A,D

QUESTION NO: 24 How do you change a volume group name without reloading the data? A. It is not possible. B. vgchange C. vgexport, mkdir, mknod, vgimport D. vgremove, mkdir, mknod, vgcreate Answer: C

QUESTION NO: 25 How do you remove a virtual partition? A. from the vPar monitor: MON>VPARREMOVE -p B. from the MP: CM>VPARDELETE and select the name of the vParfrom the list


10

HP HP0-A01: Practice Exam C. execute vparstatus, then verify the vPar is down using vparremove -p D. bring down all the vPar kernels made from the same nPar and reboot the kernel into the nPar Answer: C

QUESTION NO: 26 If ioscan shows no device files for a claimed hardware path, which command can be used to recreate them? A. Issf B. reboot C. insf-e D. /sbin/ioinitrc Answer: C

QUESTION NO: 27 Click the Exhibit button.

Why do you see an "x" for the users in the second field of the /etc/passwd file? A. password is expired B. blank password is used. C. user is currently deactivated. D. shadow password is enabled. Answer: D

QUESTION NO: 28 Which feature is new to 11 i v3 and is only available on Integrity servers? A. NUMA B. ccNUMA C. concurrent dumps D. single CPU per socket "Pass Any Exam. Any Time." - 100% Guaranteed 11


QUESTION NO: 29 Which file systems are included with the HP-UX Foundation Operating Environment (OE)? (Select two.) A. ext3 B. hfs C. VxVM D. memfs E. BaseJFS F. Online JFS Answer: B,E

QUESTION NO: 30 Which vPar feature is available on HP-UX 11i v3? A. shared I/O B. CPU granularity C. dynamic migration of I/O D. dynamic migration of memory Answer: D

QUESTION NO: 31 You want to create a mirror of a logical volume using two controllers. Which configuration file is used to accomplish this? A. /etc/lvmrc B. /etc/lvmtab C. /etc/lvmpvg D. /etc/dualcontroller Answer: C


HP HP0-A01: Practice Exam Which HW components are always found in an HP Integrity processor-based system? (Select three.) A. core I/O B. cell boards C. ltanium2CPU D. PCI I/O cards E. PA 8900 CPU F. HP-PB I/O cards Answer: A,C,D

QUESTION NO: 33 Which HP-UX 11 i v3 command allows SCSI device management and diagnoses? A. ioinit B. iofind C. scsiutil D. scsimgr Answer: D

QUESTION NO: 34 Which are structures inside a journal file system? (Select two.) A. mcells B. intent log C. fragment D. inode table E. cylinder group Answer: B,D

QUESTION NO: 35 HP-UX typically has multiple file systems configured. What is an advantage single HP-UX system? A. enables the creation of very large files B. required for a demand paging system


13

HP HP0-A01: Practice Exam C. helps to avoid excessive file fragmentation D. allows each file system to be tuned separately Answer: D

QUESTION NO: 36 What do physical volume links provide in HP-UX 11i v2? A. access to a spare disk B. automatic load balancing C. an alternate path to a disk D. improved RAID performance Answer: C

QUESTION NO: 37 Which command determines which device files are configured for boot, root, swap and dump? A. lifls-vvg00 B. Ivlnboot-v vg00 C. vgdisplay-v vg00 D. Ivdisplay -v /dev/vgroot Answer: B

QUESTION NO: 38 What is the purpose of the extendfs command? A. increases the size of active swap B. increases the size of a logical volume C. extends a file system within a logical volume D. shares a logical volume with another system E. extends a logical volume across volume groups Answer: C

QUESTION NO: 39


14

HP HP0-A01: Practice Exam Which symbol is used to append error messages to a file in the POSIX shell? A. 2> B. >>2 C. 2> Answer: D

QUESTION NO: 40 How do you search through all man pages for a command? A. man -c keyword B. man -k keyword C. man -s keyword D. man -v keyword Answer: B

QUESTION NO: 41 What can be determined using the file command? A. type of file selected B. absolute path for an executable C. compiler options used to create an executable D. pseudo terminal your session is currently logged on Answer: A

QUESTION NO: 42 Which command makes additional crontab entries? A. cron-a B. crontab-e C. vi /etc/crontab D. /usr/sbin/cron -e Answer: B


15

HP HP0-A01: Practice Exam QUESTION NO: 43 What does a hard link between two files do? A. allows two users to own the same file B. ensures that two files get deleted together C. allows multiple file names to reference the same data in a filesystem D. allows multiple file names to reference the same data across two filesystems Answer: C

QUESTION NO: 44 HOTSPOT Click the Task button. Using point and click, identify the User ID field in the /etc/passwd file shown in the graphic.

Click on the correct location or locations in the exhibit. Answer:

Explanation:


16


QUESTION NO: 45 Which command does root use to send an instant message to all users? A. wall B. talk C. send D. write Answer: A

QUESTION NO: 46 What does find /-name datafile return? A. path names of all files called datafile B. number of files called datafile in your current directory C. relative path of files called datafile from your current directory down D. relative path names of all files called datafile in your current directory Answer: A

QUESTION NO: 47 Which command can be used to verify a network interface card (NIC) is enabled? A. arp B. ping C. lanscan D. nslookup Answer: C

QUESTION NO: 48 What does the command touch myfile do if myfile exists? A. nothing B. gives an error


17

HP HP0-A01: Practice Exam C. sets the file size to zero D. updates the date/time stamp Answer: D

QUESTION NO: 49 Information about the currently installed software for the local system is stored in which location? A. /var/adm/sw/depot B. A/ar/adm/sw/products C. /var/adm/sw/filesets D. /var/adm/sw/swinstall.log Answer: B

QUESTION NO: 50 How do you determine which patches are currently installed on the system? A. check_patches B. swlist -I product | grep -i ph C. swlist -I depot | grep -i ph D. swlist -I product | grep -i patch Answer: B

QUESTION NO: 51 What is the smallest component that you can install with swinstall? A. file B. fileset C. product D. sub-product Answer: B

QUESTION NO: 52


18

HP HP0-A01: Practice Exam Which file transfer protocols are used by an Ignite server? (Select two.) A. nfs B. rep C. scp D. tftp E. cifs Answer: A,D

QUESTION NO: 53 Which HP Role-Based Access Control (RBAC) command allows a user to execute a program under a different user id? A. exec B. sudo C. runas D. privrun Answer: D

QUESTION NO: 54 Which file configures PAM (Pluggable Authentication Module)? A. /etc/pam.conf B. /sbin/init.d/pam C. /opt/PAM/pam.conf D. /etc/rc.config.d/pam Answer: A

QUESTION NO: 55 Which security features are available on 11 i v2 and not available on 11i v1? (Select three.) A. IPSec B. Bastille C. LDAP-UX D. Install-time Security


19

HP HP0-A01: Practice Exam E. Security Containment F. Encypted Volume and File System Answer: D,E,F

QUESTION NO: 56 What is the default umask value for a non-root user? A. 022 B. 200 C. 440 D. 644 Answer: A

QUESTION NO: 57 The anonymous user (nobody) is pre-configured on HP-UX to have which user ID? A. 0 B. 2 C. -2 D. 65534 E. -65534 Answer: C

QUESTION NO: 58 Which statement is true about a Virtual Private Network (VPN)? A. It is only used behind a firewall. B. It is a very fast dedicated network. C. It allows for clear text transmission. D. It is an encrypted stream over a public network. Answer: D

QUESTION NO: 59


20

HP HP0-A01: Practice Exam Which command compares the current state of the system to a saved Bastille baseline? A. bastille_diff B. bastille_drift C. bastille_verify D. bastille_compare Answer: B

QUESTION NO: 60 Which benefit does PV-Links provide? A. multiple paths to the same U\N card B. multiple paths to the same physical disk C. symbolic link to the same physical device D. multiple physical disks combined into a volume group Answer: B

QUESTION NO: 61 Which HP-UX 11 i v3 command allows SCSI device management and diagnoses? A. ioinit B. iofind C. scsiutil D. scsimgr Answer: D

QUESTION NO: 62 Which I/O bus technology is supported on Integrity based systems? A. PCI B. EISA C. HSC D. EIDE Answer: A


21

HP HP0-A01: Practice Exam QUESTION NO: 63 Which file system component contains information describing file attributes? A. inode B. intent log C. superblock D. journal cache Answer: A

QUESTION NO: 64 Which command can be used to show all physical volumes in a volume group? A. vgdisplay B. pvdisplay C. Ivdisplay D. Ivmdisplay Answer: A

QUESTION NO: 65 What is a use of the intent log in a journaled file system? A. log meta data changes B. provide an audit trail log C. track mirror transactions D. improve buffer cache performance E. log user data prior to a physical write Answer: A

QUESTION NO: 66 Which new features of HP-UX 11 i v3 potentially increase the overall I/O performance compared to previous releases of HP-UX 11i? (Select two.) A. Native Multi-Pathing B. sx2000 chipset support C. Agile device addressing "Pass Any Exam. Any Time." - 100% Guaranteed 22

HP HP0-A01: Practice Exam D. Unified File Cache (UFC) E. Persistant Device Special Files Answer: A,D

QUESTION NO: 67 Which main file contains the LVM configuration information? A. Ivmrc B. Ivmpvg C. Ivmtab D. Ivmconf E. Ivminfo Answer: C

QUESTION NO: 68 You have expanded an existing LUN in your EVA storage. The LUN belongs to an HP-UX 11 i v3 LVM volume group (VG). You want to expand the volume group to reflect the new LUN size. What is the most efficient way to accomplish this? A. You cannot expand a physical volume when using LVM. B. Create another physical volume and extend your current VG. C. Backup, remove, create and restore the data to reflect the new size. D. Use the vgmodify command to change the physical volume attributes. Answer: D

QUESTION NO: 69 Which command ends an unresponsive process? A. kill-1 PID B. kill-3 PID C. kill-s SIGSTOP PID D. kill-sSIGKILL PID Answer: D


23

HP HP0-A01: Practice Exam QUESTION NO: 70 Which technology does the Intel Itanium2 processor use? A. Complex Instruction Set Computing B. Reduced Instruction Set Computing C. Explicity Parallel Instruction Computing D. Super Scalar Reduced Instruction Computing Answer: C

QUESTION NO: 71 DRAG DROP Click the Task button. Using drag and drop, match each partitioning technology with the correct description.

Answer:

Explanation: Drag and drop question. Drag the items to the proper locations


24


QUESTION NO: 72 What is the function of the HP CIFS Server? A. to share HP-UX file systems with Windows clients B. tomount Windows file systems on an HP-UX system C. to share HP-UX CIFS-formatted disks with Windows clients D. tomount Windows CIFS-formatted disks on an HP-UX system Answer: A

QUESTION NO: 73 What are the new features of BIND 9.3.2? (Select three.) A. integration with IPFilter B. storing of IPv6 addresses C. support for new DNSSEC features D. new method of listing master servers E. configure the ordering of records in a multi-record response Answer: C,D,E

QUESTION NO: 74 Which tools have been deprecated with the introduction of the nwmgr command? (Select three.) A. netstat B. ifconfig C. linkloop D. lanscan E. lanadmin Answer: C,D,E

QUESTION NO: 75 Which Directory Server products are available for HP-UX 11i v3? (Select two.)


25

HP HP0-A01: Practice Exam A. NIS Server B. NIS+Server C. LDAP-UX Integration D. SuSe Directory Server E. Red Hat Directory Server Answer: A,E

QUESTION NO: 76 Which network transport protocol is supported by NFS version 4? A. rtp B. tcp C. ntp D. udp Answer: B

QUESTION NO: 77 Which command configures an IP address on an HP-UX system? A. ifconfig B. ipconfig C. netconfig D. lanconfig Answer: A

QUESTION NO: 78 Which command displays the IP address to hardware address translation table? A. arp B. netstat C. linkloop D. lanscan E. nslookup Answer: A


26


QUESTION NO: 79 Which file is used during network startup to identify the network interface name, IPv4 address, and subnet mask of your U\N card? A. netconf B. nfsconf C. auditing D. swconfig Answer: A

QUESTION NO: 80 Which protocols are supported by the HP CIFS Server to authenticate users? (Select two.) A. EAP B. ssh C. NTLM D. Kerberos E. Public/Private Key Answer: C,D

QUESTION NO: 81 Which protocol is used to assign an IP address to hosts? A. DNS B. BIND C. DHCP D. BOOTP Answer: C

QUESTION NO: 82 Which configuration file determines the synchronization sources and operating modes of NTP?


27

HP HP0-A01: Practice Exam A. /etc/xntpd B. /etc/ntp.conf C. /etc/rc.config.d/ntpconf D. /etc/rc.config.d/netdaemons Answer: B

QUESTION NO: 83 On an NFS server, which commands can you use to determine which clients have mounted exported file systems? (Select two.) A. mount -v B. showmount-a C. more /etc/rmtab D. more /etc/nfstab E. more /etc/mounts Answer: B,C

QUESTION NO: 84 Which command is used to verify remote host connectivity? A. inet B. ping C. netstat D. portmap Answer: B

QUESTION NO: 85 Which HP service and support tool is offered free-of-charge and provides proactive event notification to HP in case of failure of HP-UX servers? A. Support Tools Manager B. Event Monitoring Service C. Instant SupportEnterprise Edition D. HP Online Diagnostics Environment E. HP Offline Diagnostics Environment "Pass Any Exam. Any Time." - 100% Guaranteed 28


QUESTION NO: 86 How do you determine which patches are currently installed on the system? A. check_patches B. swlist -I patch C. swlist -I depot | grep -i ph D. swlist -I product | grep -i patch Answer: B

QUESTION NO: 87 Which Ignite command makes a recovery tape of all files in vgOO? A. make_net_recovery -x inc=/dev/vgOO -d /dev/rmt/1 mn B. make_tape_recovery -x inc_vgOO=all -a /dev/rmt/1 mn C. make_recovery -x inc_entire=/dev/vgOO -a /dev/rmt/1 mn D. make_tape_recovery -x inc_entire=/dev/VgOO -a /dev/rmt/1 mn Answer: D

QUESTION NO: 88 Information about the last installation for the local system is stored in which location? A. /var/adm/sw/depot B. /var/adm/sw/products C. /var/adm/sw/filesets D. /Var/adm/sw/swinstall.log Answer: D

QUESTION NO: 89 A customer wants to migrate to HP-UX 11 i v3. The customer has several HP 9000 and Integrity systems to test on. Which options or systems will support HP-UX 11i v3? (Select two.)


29

HP HP0-A01: Practice Exam A. L3000 currently running HP-UX 11 i v2 B. BL60p currently running HP-UX 11 i v2 C. rp3410 currently running HP-UX 11 i v2 D. vPar (version A.03.X) on HP 9000 Superdome running HP-UX 11 i v1 Answer: B,C

QUESTION NO: 90 DRAG DROP Click on the Task button. Using drag and drop, match the commands with the functions performed.

Drag and drop question. Drag the item to the proper location. Answer:


30


Explanation:

QUESTION NO: 91 Which operator will start a process in the background? A. ; B. || "Pass Any Exam. Any Time." - 100% Guaranteed 31

HP HP0-A01: Practice Exam C. & D. |& E. SS Answer: C

QUESTION NO: 92 How do you search through all man pages for a command? A. man -c keyword B. man -k keyword C. man -s keyword D. man -v keyword Answer: B

QUESTION NO: 93 Which statements are true regarding threads and processes? (Select two.) A. A thread is a component of a process B. A process is a component of a thread. C. Threads and processes have nothing to do with each other. D. A thread forces the entire process to run on a single set of resources. E. A process is a container for a set of instructions that carry out a task of the program. Answer: A,E

QUESTION NO: 94 HOTSPOT Click the Task button. Using point and click, identify on the password field in the /etc/passwd file that is displayed in the graphic.


32

HP HP0-A01: Practice Exam Hotspot question. Click on the correct location or locations in the exhibit. Answer:

Explanation:

QUESTION NO: 95 Which environmental variable allows you to override the default directories searched for man pages? A. PATH B. PATHVI C. MANPATH D. MANPAGE MANPAGE Answer: D

QUESTION NO: 96 Which command can you use to terminate a process? A. MANPAGE MANPAGE B. kill C. stop D. abort E. signal F. terminate


33

HP HP0-A01: Practice Exam Answer: A

QUESTION NO: 97 Which command does root use to send an instant message to all users? A. wall B. talk C. send D. write Answer: A

QUESTION NO: 98 Which sftp command allows a user to copy the contents of an entire directory? A. get B. rep C. mget D. getall E. mpull Answer: C

QUESTION NO: 99 What does the command touch myfile do if myfile exists? A. nothing B. gives an error C. sets the file size to zero D. updates the date/time stamp Answer: D

QUESTION NO: 100 Which statement describes the configuration of HP System Insight Manager (HP SIM) users and authorizations?


34

HP HP0-A01: Practice Exam A. HP SIM authorizations are configured in Select Access. B. HP SIM authorizations are derived from the operating system login account permissions. C. User accounts and authorizations in HP SIM are independent of operating system accounts. D. User accounts must exist on the HP SIM central management server and authorizations are configured within HP SIM. Answer: D

QUESTION NO: 101 DRAG DROP Click the Task button. Using drag and drop, arrange the steps in the correct order to bring a running Integrity system into single user mode.



35


Explanation:

QUESTION NO: 102 DRAG DROP Click the Task button. Using drag and drop, match the process or daemon name with the correct definition.


36



QUESTION NO: 103 DRAG DROP


37

HP HP0-A01: Practice Exam Click the Task button. Using drag and drop, match each command with the corresponding description.


QUESTION NO: 104 If the HP System Management Homepage daemon is not running, which command A. smh start B. smh startup C. hpsmh start D. hpsmh autostart Answer: D

QUESTION NO: 105


38

HP HP0-A01: Practice Exam Click the Exhibit button.

What does the expression by daemon mean in the /var/adm/kc.log? A. kernel module was changed via SAM B. kernel module was changed via the web interface (SMH/kcweb) C. kernel module was changed on command line D. kernel module was changed by any user with GID root Answer: B

QUESTION NO: 106 During a run-state change from run level 1 to run level 2, which of these scripts would run last? A. /sbin/rc2.d/S620xfs B. /sbin/rc2.d/S500inetd C. /sbin/rc2.d/K200tps.rc D. /sbin/rc2.d/K900nfs.server E. /sbin/rc2.d/S430nfs.client Answer: A

QUESTION NO: 107 Using the Online JFS product, which command sequence extends a mounted JFS file system? A. Ivextend, fsadm B. Ivextend, extendfs C. umount, Ivextend, fsadm D. umount, Ivextend, extendfs


39

HP HP0-A01: Practice Exam Answer: A

QUESTION NO: 108 Which statements are true about 11 i v3 support of multi-pathing? (Select two.) A. Native Multi-Pathing is bundled with all the HP-UX Operating Environments. B. Native Multi-Pathing works with only Persistent Device Special Files (DSFs). C. Native Multi-Pathing works with both Legacy and Persistent Device Special Files (DSFs). D. Native Multi-Pathing is bundled with theEnterprise and Mission Critical Operating Environments. j E. Native Multi-Pathing is bundled with all of the HP-UX Operating Environments except the Technical Compute OE. Answer: A,C

QUESTION NO: 109 By default, where does the cpio command send its output? A. /tmp B. stdout C. stderr D. cpio.out Answer: B

QUESTION NO: 110 How do you add 16GB of memory to a vPar? A. from the vPar monitor: MON> vparmodify -p # -a mem: 16Gb B. from the MP: CM>VPARMOD .select the vPar name from the list, then select Add Memory and type 16G C. from the HP-UX command line: execute vparremove -p and recreate the vPar with the desired amount of memory D. from the HP-UX command line: execute vparstatus to determine the vPar is down, then execute vparmodify -p -a mem::16348 Answer: D


40

HP HP0-A01: Practice Exam QUESTION NO: 111 Which commands should be used to monitor disk I/O statistics? (Select two.) A. sar B - top c - iostat D. netstat E. linkloop Answer: A

QUESTION NO: 112 Which command displays active shared memory segments? A. ipcs B. mstat C. vmstat D. strings /dev/kmem Answer: A

QUESTION NO: 113 Which command identifies known security vulnerabilities on the system? A. swa ident B. swa scan C. swa report D. swa sec chk Answer: C

QUESTION NO: 114 Which security tool can be used to detect an attack on HP-UX systems? A. NIS+ B. IPSec C. IPFilter D. Host IDS "Pass Any Exam. Any Time." - 100% Guaranteed 41

HP HP0-A01: Practice Exam E. Secure Shell (ssh) Answer: D

QUESTION NO: 115 Which command compares the current state of the system to a saved Bastille baseline? A. bastille_diff B. bastille_drift C. bastille_verify D. bastille_compare Answer: B

QUESTION NO: 116 Which Pluggable Authentication Module (PAM) restricts login access for a set of users? A. pam_unix A. pam_hpux B. pam_authz C. pam_access D. pam_validate Answer: C

QUESTION NO: 117 What is the default umask value for a non-root user? A. 022 B. 200 C. 440 D. 644 Answer: A

QUESTION NO: 118


42

HP HP0-A01: Practice Exam What is a benefit of Secure Shell? A. increase security of POSIX shell B. prevents denial of service attacks C. authentication through hidden identity D. privacy of data through strong encryption Answer: D

QUESTION NO: 119 What does the file /var/adm/inetd.sec do? A. controls access to kernel subsystems B. stores internet security services history C. specifies extra security for anonymous ftp users D. provides an extra layer of security for HP-UX systems Answer: D

QUESTION NO: 120 Which new features of HP-UX 11 i v3 potentially increase the overall I/O performance compared to previous releases of HP-UX 11i? (Select two.) A. Native Multi-Pathing B. sx2000 chipset support C. Agile device addressing D. Unified File Cache (UFC) E. Persistant Device Special Files Answer: A,D

QUESTION NO: 121 Which file systems are included with the HP-UX Foundation Operating Environment (OE)? A. HFSandVxVM B. Base JFS and ext3 C. HFS and Base JFS D. HFS and Online JFS


43

HP HP0-A01: Practice Exam E. Online JFS and memfs Answer: C

QUESTION NO: 122 Which statements are true for a LVM logical volume? (Select two.) A. It is not a file system. B. It may contain a file system. C. You can have one logical volume per volume group. D. A logical volume contains one or more volume groups. Answer: A,B

QUESTION NO: 123 The following message is displayed while attempting to unmount the /optfilesystem. Which command is used to determine which user is causing the file system to be busy? # umount /opt umount: cannot unmount/opt: Device busy A. bdf/opt B. who/opt C. showmount /opt D. fuser-cu/opt Answer: D

QUESTION NO: 124 Which are advantages of the Online JFS file system? (Select two.) A. supports larger disk drives B. allows more files per file system C. supports online defragmentation D. supports 128 bit encryption of system files E. supports dynamic online resizing of the file system Answer: C,E


44

HP HP0-A01: Practice Exam QUESTION NO: 125 Which LVM command allows dynamic size expansion of LUNs? A. vgmove B. vgmodify C. vgextend D. vgchange Answer: B

QUESTION NO: 126 Which feature is new to 11 i v3 and is only available on Integrity servers? A. NUMA B. ccNUMA C. concurrent dumps D. single CPU per socket Answer: C

QUESTION NO: 127 DRAG DROP Click the Task button. Using drag and drop, build the command line to create the volume group control file of vg01. Panels can be used multiple times or not used.



45


Explanation:

QUESTION NO: 128 Which I/O bus technology is supported on Integrity based systems? A. PCI B. EISA C. HSC D. EIDE Answer: A

QUESTION NO: 129 What is the purpose of the Ivextend command? A. extends a file system within a logical volume B. increases the size of active swap C. extends a logical volume across volume groups D. increases the size of a logical volume E. shares a logical volume with another system Answer: D


46

HP HP0-A01: Practice Exam QUESTION NO: 130 Which HP-UX 11 i v3 command allows SCSI device management and diagnoses? A. ioinit B. iofind C. scsiutil D. scsimgr Answer: D

QUESTION NO: 131 Which users are included in the /etc/ftpd/ftpusers file? A. those allowed ftp access B. those not allowed ftp access C. those allowed anonymous ftp access D. those allowed ftp access without a password Answer: B

QUESTION NO: 132 Which file contains information about unsuccessful login attempts? A. /etc/wtmp B. /var/adm/btmps C. /var/adm/utmps D. /var/syslog/failed_logins Answer: B

QUESTION NO: 133 Which command determines if a local user account has been locked? A. acctstat B. userstat C. passwd-l


47

HP HP0-A01: Practice Exam D. userdbstat Answer: B

QUESTION NO: 134 What is PAM (Pluggable Authentication Module) used for? A. to tell each service which authentication module to use B. to indicate which service can run in a nonsecure mode C. to enable the ftp service with pluggable module encryption D. to encrypt and authenticate IP packets at the network layer Answer: A

QUESTION NO: 135 Which command compares the current state of the system to a saved Bastille baseline? A. bastille_diff B. bastille_drift C. bastille_verify D. bastille_compare Answer: B

QUESTION NO: 136 What are benefits of Encrypted Volume and File System? (Select two.) A. protects data at rest B. protects data in use C. encrypts any mounted filesystem D. works with any supported volume manager E. provides additional file system access control Answer: A

QUESTION NO: 137 DRAG DROP Click the Task button.


48

HP HP0-A01: Practice Exam Using drag and drop, match the Install-Time Security bundles with their effects on system behavior.


QUESTION NO: 138 What is the result when a user enters the telnet command without arguments? A. An error is returned. B. Telnet enters command mode. C. The system connects to its loopback address. D. The system connects to the last known system address. Answer: B "Pass Any Exam. Any Time." - 100% Guaranteed 49


QUESTION NO: 139 In which order are cron.allow and cron.deny evaluated on an HP-UX system when both files exist? A. first cron.allow then cron.deny B. first cron.deny then cron.allow C. only cron.allow; cron.deny is ignored D. only cron.deny; cron.allow is ignored Answer: C

QUESTION NO: 140 HOTSPOT Click the Task button. Using point and click, identify on the password field in the /etc/passwd file that is displayed in the graphic.

Hotspot question. Click on the correct location or locations in the exhibit. Answer:

Explanation:


50

HP HP0-A01: Practice Exam QUESTION NO: 141 DRAG DROP Click the Task button. Using drag and drop, arrange the steps in sequence to create a file system.


QUESTION NO: 142 What can be determined using the which or whence command? A. absolute path for an executable B. current version and release of an executable C. compiler options used to create an executable D. pseudo terminal your session is currently logged on Answer: A

QUESTION NO: 143 How is the priority of a child process assigned?


51

HP HP0-A01: Practice Exam A. assigned randomly B. inherited from the parent process C. assigned the next lowest available priority D. assigned the next highest available priority Answer: B

QUESTION NO: 144 Which command scans for system hardware, interface cards, and usable I/O system devices? A. ioscan B. lanscan C. sysview D. scansys Answer: A

QUESTION NO: 145 Which variable holds the result status of an executed command? A. $! B. $# C. $? D. $error Answer: C

QUESTION NO: 146 You need information about linking files but don't know the specific command to use. Which command points you to the right command? A. which link B. man-c link C. man-k link D. apropos link Answer: C


52

HP HP0-A01: Practice Exam QUESTION NO: 147 Which command does root use to send an instant message to all users? A. wall B. talk C. send D. write Answer: A

QUESTION NO: 148 Information about the last installation for the local system is stored in which location? A. /var/adm/sw/depot B. /var/adm/sw/products C. /var/adm/sw/filesets D. /Var/adm/sw/swinstall.log Answer: D

QUESTION NO: 149 What is a benefit of using Ignite-UX? A. reduces the cost of software distribution B. updates all applications to their current versions C. searches the internet for updates to all applications listed in the /etc/update file D. automatically installs all current OS patches fromwww.hp.com/HP-UX/patches Answer: A

QUESTION NO: 150 What is the smallest component that you can install with swinstall? A. file B. fileset C. product D. sub-product


53

HP HP0-A01: Practice Exam Answer: B

QUESTION NO: 151 Which information is provided in the swiist output by default? (Select three.) A. version number B. product/bundle size C. product/bundle name D. description of the product/bundle E. directory where product/bundle is installed Answer: A

QUESTION NO: 152 Which configuration file determines the synchronization sources and operating modes of NTP? A. /etc/xntpd B. /etc/ntp.conf C. /etc/rc. c o nfi g. d/ntp c o nf D. /etc/rc.config.d/netdaemons Answer: B

QUESTION NO: 153 The /etc/resolv.conf file effects which service A. NIS B. NTP C. DHCP D. DNS/BIND Answer: D

QUESTION NO: 154 On an NFS client, which configuration file is used to name the local mount point when mounting a file system from an NFS server during system boot?


54

HP HP0-A01: Practice Exam A. fstab B. nfstab C. exports D. nfs.conf Answer: A

QUESTION NO: 155 On HP-UX 11iv3, what is the default maximum protocol version of the NFS server and client? A. 1 B. 2 C. 3 D. 4 Answer: C

QUESTION NO: 156 The set_parms command is an interactive system set-up command that allows you to specify which various parameters? (Select two.) A. sendmail B. timezone C. IP address D. security parameters Answer: B,C

QUESTION NO: 157 Which commands query the DNS name server for IP related information? (Select two.) A. dig B. iplist C. ipview D. nslookup Answer: A


55

HP HP0-A01: Practice Exam QUESTION NO: 158 Which program invokes Internet server processes as needed? A. inetd B. ifconfig C. swconfig D. svrconfig Answer: A

QUESTION NO: 159 What is the length of an IPv6 address? A. 32 bits B. 48 bits C. 64 bits D. 128 bits Answer: D

QUESTION NO: 160 What is the function of the HP CIFS Client? A. to share HP-UX file systems with Windows clients B. tomount Windows file systems on an HP-UX system C. to share HP-UX CIFS formatted disks with Windows clients D. tomount Windows CIFS-formatted disks on an HP-UX system Answer: B

QUESTION NO: 161 To enable the DHCP client on boot, the DHCP_ENABLE variable is set to '1' in which file? A. /etc/hosts B. /etc/nsswitch.conf C. /etc/rc.config.d/netconf D. /etc/rc.config.d/dhcp.conf


56


QUESTION NO: 162 What is an "alias" IP address? A. an additional IP address on a single NIC B. another (secondary) host using your host address C. a short form of the IP address used to simplify connections D. a duplicate (identical) address configured on two separate NICs on the same system Answer: A

QUESTION NO: 163 Which configuration file determines the mail relay behavior of the sendmail daemon? A. /etc/sendmail.relay B. /etc/mail/relay.conf C. /etc/mail/sendmail.cf D. /etc/rc.config.d/netdaemons Answer: C

QUESTION NO: 164 Which file configures whether AutoFS is enabled or disabled on an HP-UX: system? A. /etc/netconf B. /etc/nfsconf C. /etc/a utomount.conf D. /etc/rc.config.d/nfsconf Answer: D

QUESTION NO: 165 You are installing an rx7640 with two internal disks and Mirror/Disk UX. Which RAID level provides data protection for this environment?


57

HP HP0-A01: Practice Exam A. RAID 0 B. RAID 1 C. RAID 3 D. RAID 5 E. RAID 1 +0 Answer: B

QUESTION NO: 166 What are key features of HP Systems Insight Manager (HP SIM)? (Select four.) A. network maps B. inventory reports C. application management D. automatic event handling E. role-based access control F. historical performance reports G. secure command fan-out to multiple systems Answer: B,D,E,G

QUESTION NO: 167 Which file needs to be configured to automatically check and mount file systems? A. /etc/sbtab B. /etc/fstab C. /etc/mnttab D. /var/adm/fstab Answer: B

QUESTION NO: 168 Which default system setting is located in /etc/default directory? A. default system time B. default file system type C. default disk space usage limits D. default password for new users "Pass Any Exam. Any Time." - 100% Guaranteed 58

HP HP0-A01: Practice Exam Answer: B

QUESTION NO: 169 What is the main script that controls the start up of system services? A. /sbin/rc B. /sbin/ioinitrc C. /sbin/bcheckrc D. /sbin/preinitre Answer: A

QUESTION NO: 170 Which features are enabled by the HP-UX WBEM (Web-Based Enterprise Management) provider instrumentation? (Select three.) A. HP-UX Software Assistant capabilities B. HP Systems Insight Manager (HP SIM) inventory reports C. HP Systems Insight Manager (HP SIM) user configuration D. Management processor display of health of the server it is managing E. HP Systems Management Homepage (SMH) display of component health F. HP SIM and SMH display of system health and properties G. HP System Management Homepage (SMH) configuration snapshots and inventory reports Answer: B,E,F

QUESTION NO: 171 Where is the default run-state found? A. /etc/rc B. /etc/rc3.d C. /etc/inittab D. /sbin/bcheckrc E. defined by the user at boot time Answer: C


59

HP HP0-A01: Practice Exam QUESTION NO: 172 Which command is used to pvcreate a disk that has been previously used in LVM? A. pvcreate-F/dev/dsk/c1t2d0 B. pvcreate -f /dev/dsk/dt2d0 C. pvcreate-B/dev/rdsk/c1t2d0 D. pvcreate-f/dev/rdsk/cTt2d0 Answer: D

QUESTION NO: 173 What can an administrator do to optimize an existing JFS filesystem? A. increase SWAP size B. change mount options C. change syslog.log size D. increase the number of logical volumes Answer: B

QUESTION NO: 174 Which statements are true regarding the new 11 i v3 Mass Storage Stack device special files (DSFs)? (Select three. A. You can mix Legacy and Persistent DSFs. B. You must choose either Legacy or Persistent DSFs. C. Both Legacy and Persistent DSFs are created by default. D. You can choose for each LUN to use only Persistent DSFs. E. You can choose for the entire system to use only Persistent DSFs. F. You can set a flag to have Legacy DSFs created for current and future storage devices. Answer: A,C,E

QUESTION NO: 175 If the console output displays a FAIL message of a service or application during system startup, which file can provide additional information on the symptoms? A. /etc/salog "Pass Any Exam. Any Time." - 100% Guaranteed 60

HP HP0-A01: Practice Exam B. /etc/rc.log C. /etc/messages.log D. /var/adm/sw/swagent.log Answer: B

QUESTION NO: 176 Click the Exhibit button.

What does the expression by root mean in the /var/adm/kc.log? A. The kernel module was changed via SAM. B. The kernel module was changed via web interface (SMH/kcweb). C. The kernel module was changed on command line D. The kernel module was changed by any user with GID root. Answer: C

QUESTION NO: 177 Why do you use the HP-UX System Management Homepage (SMH) and its functional areas? (Select three.) A. to configure the HP-UX Event Monitoring System B. to see the health of the system and its components C. to manage a small number of systems in your environment D. to perform HP-UX management tasks such as configuration E. to run inventory reports and snapshot comparisons on the HP-UX system F. to manage Web-BasedEnterprise Management subscriptions and view events on the system


61

HP HP0-A01: Practice Exam Answer: B,D,F

QUESTION NO: 178 Identify the guidelines for selecting device swap areas. (Select two.) A. one swap area per disk B. dissimilar size of the disks C. consider speed of the disks D. 1st swap should have priority E. minimum two swap areas per disk Answer: A,C

QUESTION NO: 179 Which commands are used to list device file details? (Select two). A. Isdev B. Isf -a C. insf-e D. ioscan-fn E. Issf Answer: D,E


62

Documents

HP0-A01.pdf