Upload
sheik8o
View
37
Download
1
Embed Size (px)
DESCRIPTION
HP Procurve CLI Cheat Sheet
Citation preview
Config Files and Flash Files#show config --- Show config file
#show running config --- Show running config file
#copy config config1 usb <file name> --- Copy active config file to USB drive
#copy config config1 tftp <IP> <file name> --- Copy your config to file to TFTP server.
#copy tftp config <fileneme> <IP> ---Copy your config from TFTP server to switch
#show flash --- Displays info about flash (version etc.)
#copy tftp flash <IP> <file name> <primary|secondary> --- Download and update your flash with from TFTP server
#copy flash usb <file name> <primary|secondary> --- Copy flash to USB drive
#copy flash tftp <IP> <file name> <primary|secondary> --- Copy flash to TFTP server
#write memory --- Save config
2
Event Logs#log [<port>] [-r] --- Display log events of port [most recent first]
#log <IP address> --- Display log events of a specific IP
3
Miscellaneous#hostname <hostname> --- Set switch hostname
#link-test <destination switch MAC> --- Test connectivity between switches (local switch and destination switch)
#ping <IP address> --- Ping IP 192.168.0.1
#chassislocate --- Turn on/off switch locator led or blink it (30 minutes)
#chassislocate blink <time> --- Blink switch locator led set time in minutes
#ntp1 <time server name> --- Add time server to NTP server list
#timesync ntp --- Enable NTP synchronization with servers
#password operator --- Set operator password (Normal user / read-only )
#password manager --- Set manager password (Admin user / read-write)
#password all --- Set operator and manager password
#enable --- Switch to manager lever from operator level
#exit --- Exit current level
#logout --- Logout out of the switch
4
PoE#show power-over-ethernet brief [<port>] --- To show PoE
#no interface <port> power-over-ethernet --- To turn off for a port
#interface <port> power-over-ethernet --- To turn on for a port
5
Ports and LACP Trunks#interface <port> name <port-name> --- Assign a port name to port-list
#show name --- Show port name
#show interface --- Show port statistics
#interface <port> lacp active --- Configure dynamic LACP trunk on c1-c4
#no interface <port> lacp --- Remove port from dynamic LACP (returns to passive LACP)
#show trunks [<port>] --- Show trunk status (port optional)
#show lacp --- Show data for LACP configured ports
#trunk <port> <trk1...trk36> <trunk|lacp> --- Configure static trunk or LACP
#no trunk <port> --- Remove trunk
#[no] int <port> rate-limit all <0...100> --- Set (or remove) rate limit on port according to selected percentage
#show rate-limit all [<port>] --- Show rate limit on all or selected ports
#[no] int <port> rate-limit icmp <0...100> --- Set (or remove) rate limit to all ICMP traffic
#show rate-limit icmp [<port>] --- Show ICMP rate limit on all or selected ports
#loop-protect <port range> --- Turn on loop protection
#show loop-protect --- Display loop protection
6
Security#dhcp-snooping authorized-server <IP address> --- Set authorized DHCP server(s)
#dhcp-snooping trust <port> --- Set ports authorized to pass DHCP
#dhcp-snooping vlan <VLAN ID range> --- Enable DHCP on specified VLANs
#dhcp-snooping --- Enable DHCP globally
#dhcp-snooping option 82 --- Enable option 82 (on edge switches)
#crypto key generate ssh --- Generate an SSH key
#ip ssh --- Enable SSH
#no telnet-server --- Disable Telnet
#no web-management --- Disable web interface
#arp-protect trust <port> --- Set arp-protect trusted ports
#arp-protect vlan <VLAN ID range> --- Enable arp-protect on specified VLANs
#arp-protect --- Enable arp-protect globally
7
Show Information Commands#show system-information --- Show system information
#show name --- Show port name
#show config --- Show config file
#show mac <port> --- Show MAC-address of the device on specified port
#show mac <mac address> --- Show which port device with MAC-address is connected to
#show int d --- Show real time port traffic
#show int custom --- Show a custom view of port information
#show flash --- Displays info about flash (version etc.)
#show interface --- Show port statistics
#show run --- Show running config
#show lacp --- Show LACP information
#show trunks --- Show trunk information
#show spanning-tree --- Show STP information
#show rate-limit all [<port>] --- Show rate limit on all or selected ports
#show rate-limit icmp [<port>] --- Show ICMP rate limit on all or selected ports
#show snmpv3 <group|user> --- Show SNMPv3 groups or users
8
SNMPv3#snmpv3 enable --- Enable SNMP version 3
#snmpv3 only --- Restrict SNMP to only version 3
#snmpv3 user <user name> --- Adds an SNMP user and creates an optional password
#snmpv3 group <group> user <user> sec-model ver3 --- Adds a user to a desired access group
#show snmpv3 <group|user> --- Show SNMPv3 groups or users
9
VLANs#vlan <vlan ID> name <vlan name> --- Create VLAN and set its ID and name
#no vlan <port> --- Remove vlan setting on port
#vlan <vlan ID> <tagged|untagged> <port> --- Set port as tagged on vlan
#show vlan --- Show information about VLAN on this swtich
#show vlan ports <port> --- Show VLAN ID and status of specific port
#show vlan <VLAN ID> --- Show ports on this VLAN and port status