7
HOW TO USEPRODUCTGUIDE It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case we are using the fingertip but you can use a cooton swab or a napkin. Resutl with the product applied. A new range of metallic paints created from a wax base. Made from high quality pigments, achieving extremely realistic effects. The basic product can be used in all branches of scale modelling, and it can be applied by brush, with the fingertip, or with a cotton swab. Once dried, it can be polished to achieve a metallic finish. 2 3

HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

It is better to prime first so that the product sticks best to the surface.

1Start to spread it over the desired area, in this case we are using the fingertip but you can use a cooton swab or a napkin.

Resutl with the product applied.

A new range of metallic paints created from a wax base. Made from high quality pigments, achieving extremely realistic effects. The basic product can be used in all branches of scale modelling, and it can be applied by brush, with the fingertip, or with a cotton swab. Once dried, it can be polished to achieve a metallic finish.

2 3

Page 2: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

Start polishing with a cloth.

We start masking to use another kind of metal for the tip.

If you find some places without enough wax place it and start over the polishing process.

Torpedo ready for the next phase.

4

9

7 8

The more you polish the shinner it becomes, it always depends on the desired effects.

Apply it carefully to avoid irregularities.

We have polished thoroughly to get a high metallic gloss.

The mask applied.

5

10

6

11

Page 3: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

Repeat the same process with another metallic wax in this case we have used copper.

12Spread properly the product over the desired area.

Weathering detail.

The torpedo finished, with some acrylic weathering applied.

Depending on the result to achieve, we polish in some way or another, less polishing would mean an older metal while polishing a lot means newer metal.

13 14

Page 4: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

In this case we are using a Tiger wheel at 1/4 scale.

Yet another example over a propeller.

Start polishing as much as we want, as always depen-ding on the result to achieve.

Final result.

1

1

4

5

Start to spread the Gun Metal color over the wheel.

In this case we have used the Brass color.

Wheel with the wax completely spread.

Polish it as usual.

2

2

3

3

Page 5: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

This part is a periscope from Bronco Type XXIII scale model.

1Polish as usual. And see the amazing result.

2 3

Result over the model.

Page 6: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

Some more examples of the product applied

Page 7: HOWTO - ak-masters.com · HOWTO useprOducTguide It is better to prime first so that the product sticks best to the surface. 1 Start to spread it over the desired area, in this case

HOWTOuseprOducTguide

Some more examples of the product applied