Note: Backup of Option 11C system required PCMCIA Card.

Step1. Go to Start---Program---Accessories--Communication--Hyper Terminal

Step2. Enter Name as EXL and click on OK

Step3. Select COM1 port

Step4. Click on Restore Defaults from COM1 Properties and then click OK button

Step5. Login Procedure

TTY 00 SCH MTC BUG CTY 14:30OVL111 BKGD 44 >LOII ADMIN1

PASS? 0000 (4 times zero)

Step6. Backup Procedure

> LD 143

. UPGRADE

Main Cabinet Software Installation Main Menu:

1. New Install or Option 11/11E Upgrade - From Software Daughter Board2. System Upgrade3. Utilities4. New System Installation - From Software Delivery Card

[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection: 3

Utilities Menu:1. Restore Backed Up Database2. Archive Database Utilities3. Install Archived Database

To Login Type LOGIN NAME and Press Enter

Enter Password

4. Review Upgrade Information5. Clear Upgrade Information6. Undo Installation7. Flash Boot ROM Utilities8. Current Installation Summary9. Change 3900 series set languages.10. IP FPGA Utilities

[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection: 2

Customer Database Archives:

1. List Customer Database2. Remove Customer Database3. Archive a Customer Database

Enter Selection: 3

Enter a Customer name for your customized data:EXL11DEC

Customer database created: EXL11DEC

Copying database from primary drive to EXL11DEC

Archive copy completed.

Enter Selection: Q

Are you sure? (y/n/[a]bort) : Y

. **** (4 times star [Shift + 8])

Step7. Logout Procedure

> LOGO

TTY 00 SCH MTC BUG CTY 15:10OVL111 BKGD 44