Upload
buithuan
View
218
Download
4
Embed Size (px)
Citation preview
How to Order from Crafted Storage I don’t have an all-digital order form because I end up making unique things for almost every customer. Send me an e-mail at [email protected] with a description of what you’d like. I’ll reply with some digital proofs. Once we’re in synch, I’ll send you a PayPal invoice which includes your shipping costs.
Customization
Prices for Custom Work: Etching is free (within reason) and can include multiple designs per component.
Engraving is $5 per component and can include multiple designs. Walnut inlay is $10 per inlay and includes BriwaxTM finish on that piece.
Which System is Right for You?
Consider the slim system if the tournaments
you frequent give you a 6” space between the mat and the edge of the table
Consider the original tournament system if you have 8” to 16” in between mats, or want more room for your components and customization.
X-Wing Tournament Organization System (The Original) Protects and organizes your ships, cards, and templates as you move around an event
Rare-earth magnets hold the organizers to each other securely during movement
Maneuver Template Organizer: $20.00
Holds a full set of templates and range rulers (1, 2, and 3)
Area for one or two position markers
Customize the upper-left corner (approx. 40mm2 or 1.5in2).
Ship Model Organizer: $20.00
Removable divider fits three large-base, two-large & six small-
base ships, or eight small-base ships
Space for six maneuver dials (even with the dial upgrade kits)
Pilot cards fit in left and right spaces
No room for customization options
Cover for Ship Model Organizers: $20.00
Securely holds models in the ship organizer
Insets keep damage deck, dice, etc. secure while you move
Fits all pegs: regular, epic, and VCX-100
Customize the three inset areas (approx. 100mm2 and 60mm2).
Pilot and Upgrade Card Organizer: $20.00
Organizes your pilot cards, upgrades, and tokens during play
Remember to use your upgrades! The slots above each section
can display upgrade cards, shield tokens, or ship numbers
No room for customization options
New Design for 2017! Tall Box: $20.00
Inside dimensions: 80mm tall x 370mm long x 180mm wide
Will hold whatever models you’re bringing to a tournament
$10 Upgrade: line the bottom with stiff felt
Customize the long sides.
Faction Symbol or Text:
Etch or Engrave or Walnut Inlay
Faction Symbol or Text:
Etch or Engrave or Walnut Inlay
Faction Symbol or Text:
Etch or Engrave or Walnut Inlay
New Design for 2017! Short Box: $20.00
Same length and width, but only 52mm tall inside
Also fits the box inserts (pictured below).
$10.00 Upgrade: stiff felt pieces cut to fit the inside walls and
bottom (available in white, black, red, yellow, orange, pink, royal blue,
Kelley green, or brown)
Box Inserts: $10.00
This or many other configurations are possible
Completely protects everything but the VCX-100 or YV-666
Configure the assorted dividers to fit your collection in either
storage box.
$5.00 Upgrade: enough charcoal-colored foam to cut and fit
your final arrangement.
You pay shipping costs. Please remember to include your delivery address and contact info.
I love doing custom work! Let me know what you’re interested in and we’ll work something out.
Take a look at examples of other orders on the website or in the Facebook group:
craftedstorage.com
facebook.com/groups/craftedstorage
Slim System for X-Wing Tournament Organization Protects and organizes your ships, cards, and templates as you move around an event
This size is only 6” deep, and works better if your FLGS or tournament provides that much room for you.
Rare-earth magnets hold the organizers to each other securely during movement Maneuver Template Organizer: $20.00
Holds maneuver templates and ship position markers
Customize the upper-left corner (approx. 1in2) or the central
storage area (approx. 1.5in2)..
Ship Model Organizer: $20.00
Removable divider fits three large-base, two-large & six small-
base ships, or eight small-base ships
Space for a range ruler
No room for customization options
Cover for Ship Model Organizers: $20.00
Securely holds models in the ship organizer
Insets keep dice or other components secure while you move
Fits all pegs: regular, epic, and VCX-100
Customize the two inset areas (approx. 2 in by 4 in).
Pilot and Upgrade Card Organizer: $20.00
Organizes four pilot cards, upgrades, and tokens during play
Room for a damage deck holder on the right side
Tall Box: $20.00
Inside dimensions: 80mm tall x 350mm long x 115mm wide
Will hold your 100 point tournament list
$10 Upgrade: line the bottom with stiff felt
Customize the long sides.
Faction Symbol or Text:
Etch or Engrave or Walnut Inlay
Faction Symbol or Text:
Etch or Engrave or Walnut Inlay
Faction Symbol or Text:
Etch or Engrave or Walnut Inlay
Short Box: $20.00
Same length and width, but only 52mm tall inside
Also fits the box inserts (pictured below).
$10.00 Upgrade: stiff felt pieces cut to fit the inside walls and
bottom (available in white, black, red, yellow, orange, pink, royal blue,
Kelley green, or brown)
Box Inserts: $10.00
Old picture. These are resized to fit the slim system box.
Completely protects everything but the VCX-100 or YV-666
(they’re too tall).
Configure the assorted dividers to fit your collection in either
storage box.
$5.00 Upgrade: enough charcoal-colored foam to cut and fit
your final arrangement.
You pay shipping costs. Please remember to include your delivery address and contact info.
I love doing custom work! Let me know what you’re interested in and we’ll work something out.
Take a look at examples of other orders on the website or in the Facebook group:
craftedstorage.com
facebook.com/groups/craftedstorage
Destiny Organization System Bring just what you need to play, trade, and modify your tournament deck in a 9” x 6” x 6” box.
Double-walled construction protects your components with ½” of plywood, engineered to survive a trip in a backpack.
Prices for Custom Work: Etching is free. Engraving is $5 per component. Walnut inlay is $10 per
faction symbol and includes BriwaxTM finish on that piece.
Storage Box: $10.00
Card slots hold 30+ sleeved cards or 12 dice each.
Dice compartment holds 36 dice.
Price includes a stiffened-felt liner.
Customize the box sides:
Lid / Dice Tray: $10.00
Pairs with either the storage box or the tournament tray
Price includes a stiffened felt liner.
Customize the top of the lid:
Tournament Tray: $10.00
Stores and organized up to 20 dice and a sleeved deck
Price includes a stiffened felt liner.
Sides are very short, LMK if you really want to customize them:
Tournament Ramp: Free! (If your order includes a tray and a lid)
Breaks down to fit between a tournament tray and a lid
Securely holds your tray while concealing your dice
You pay shipping costs. Please remember to include your delivery address and contact info.
Pieces require assembly. Check out the instructions here: (I haven’t made them yet). I’ll assemble up to
five components for a fee of $10. Shipping will cost a bit more for assembled systems.
Faction symbol, text, or graphics:
Etch or Engrave or Walnut Inlay
Faction symbol, text, or graphics:
Etch or Engrave or Walnut Inlay
Faction symbol, text, or graphics:
Etch or Engrave or Walnut Inlay
Tanks! Organization System Each tray organizes a tank and its upgrade cards with the tokens used in play.
Prices for Custom Work: Etching is free. Engraving is $5 per component. Walnut inlay is $10 per
faction symbol and includes BriwaxTM finish on that piece.
Tank / Upgrade Deck: $10.00
Space for up to five upgrades to your tank.
Slots for damage token, ID token, and movement token
Customize the lower-right corner:
Faction symbol, text, or graphics:
Etch or Engrave or Walnut Inlay