12
Modify BTS RXU Board(MOD BTSRXUBRD) Function Use this command to rename an RXU board and modify the verification threshold of transmit bandwidth, receive bandwidth, RXU specification and number of TRXs of an RXU board. This command applies to DBS3900 GSM, BTS3900 GSM, BTS3900A GSM, BTS3900L GSM, BTS3900AL GSM, BTS3900E GSM, DBS3036, BTS3036, and BTS3036A. If users require a specific verification threshold instead of a BSC-level verification threshold, run this command to set Configure Check Threshold or Not to default value Yes, and set Forward Bandwidth, Receive bandwidth, and TRX Number. Note The RXU specification of the GRRU board is categorized into RRU3008_V1, RRU3008_V2, RRU3029, OTHER_RXU. The RXU specification of the MRRU board is categorized into RRU3908_V1, RRU3908_V2, RRU3920_V1, RRU3922E, RRU3926, RRU3928, RRU3929, RRU3936, RRU3938, RRU3942, RRU3960, RRU3961, OTHER_RXU. The RXU specification of the GRFU board is categorized into GRFU_V1, GRFU_V2, GRFU_V3, GRFUe, OTHER_RXU. The RXU specification of the MRFU board is categorized into MRFU_V1, MRFU_V2, MRFU_V2a, MRFU_V3, MRFUd, MRFUe, OTHER_RXU. The RXU specification of the BTS3900E board is categorized into BTS3900E_V1. If an RRU or RFU whose parameter values are modified cannot establish links or operate at the maximum CPRI line bit rate, you can run the command STR BTSCPRILBRNEG to start a CPRI line bit rate negotiation. Parameters Parameter ID Parameter Name Parameter Description IDTYPE Index Type Meaning: Index type of the BTS. BYNAME: query by BTS name; BYID: query by BTS index.

How to Modify BTS

Embed Size (px)

DESCRIPTION

How to Modify BTS

Citation preview

Page 1: How to Modify BTS

Modify BTS RXU Board(MOD

BTSRXUBRD)

Function

Use this command to rename an RXU board and modify the verification threshold of transmit

bandwidth, receive bandwidth, RXU specification and number of TRXs of an RXU board.

This command applies to DBS3900 GSM, BTS3900 GSM, BTS3900A GSM, BTS3900L GSM,

BTS3900AL GSM, BTS3900E GSM, DBS3036, BTS3036, and BTS3036A.

If users require a specific verification threshold instead of a BSC-level verification threshold, run

this command to set Configure Check Threshold or Not to default value Yes, and set Forward

Bandwidth, Receive bandwidth, and TRX Number.

Note

The RXU specification of the GRRU board is categorized into RRU3008_V1, RRU3008_V2,

RRU3029, OTHER_RXU.

The RXU specification of the MRRU board is categorized into RRU3908_V1, RRU3908_V2,

RRU3920_V1, RRU3922E, RRU3926, RRU3928, RRU3929, RRU3936, RRU3938, RRU3942,

RRU3960, RRU3961, OTHER_RXU.

The RXU specification of the GRFU board is categorized into GRFU_V1, GRFU_V2,

GRFU_V3, GRFUe, OTHER_RXU.

The RXU specification of the MRFU board is categorized into MRFU_V1, MRFU_V2,

MRFU_V2a, MRFU_V3, MRFUd, MRFUe, OTHER_RXU.

The RXU specification of the BTS3900E board is categorized into BTS3900E_V1.

If an RRU or RFU whose parameter values are modified cannot establish links or operate at the

maximum CPRI line bit rate, you can run the command STR BTSCPRILBRNEG to start a

CPRI line bit rate negotiation.

Parameters

Parameter ID Parameter

Name

Parameter Description

IDTYPE Index Type Meaning: Index type of the BTS. BYNAME: query by BTS

name; BYID: query by BTS index.

Page 2: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

GUI Value Range: BYNAME(By Name), BYID(By Index)

Unit: None

Actual Value Range: BYNAME, BYID

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

BTSID BTS Index Meaning: Index of the BTS, uniquely identifying a BTS in a

BSC.

GUI Value Range: 0~2047

Unit: None

Actual Value Range: 0~2047

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: N/A

Impact on Network Performance: None

BTSNAME BTS Name Meaning: Name of the BTS, uniquely identifying a BTS in a

BSC. This parameter cannot contain the following invalid

characters:

, ; = " '

In addition, BTS names cannot contain two or more

consecutive %, two or more consecutive spaces, or more than

Page 3: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

three consecutive +.

GUI Value Range: None

Unit: None

Actual Value Range: 1~64 characters

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: None

RXUIDTYPE RXU Index

Type

Meaning: Index type of the RXU. If this parameter is set to

RXUNAME(RXUName), query the RXU by RXU name. If

this parameter is set to RXUPOS(RXUPOS), query the RXU

by RXU position number. If this parameter is set to

SRNSN(SRNSN), query the RXU by subrack number.

GUI Value Range: RXUNAME(RXUName),

RXUPOS(RXUPOS), SRNSN(SRNSN)

Unit: None

Actual Value Range: RXUNAME, RXUPOS, SRNSN

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A.

RXUCHAINNO RXU Chain Meaning: Number of the RXU chain where the board is

Page 4: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

No. located

GUI Value Range: 0~249

Unit: None

Actual Value Range: 0~249

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

RXUPOS RXU Board

Position

Meaning: Position of the RXU board on an RXU chain.

GUI Value Range: 1~24

Unit: None

Actual Value Range: 1~24

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A.

CN Cabinet No. Meaning: Number of the cabinet where the BTS board is

located.

GUI Value Range: 0~62

Page 5: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

Unit: None

Actual Value Range: 0~62

MML Default Value: None

Recommended Value: None

Parameter Relationship: The value range of this parameter

varies with BTS type. Different types of BTSs support a

different number of cabinets.

Service Interrupted After Modification: No (Impact on the

UE in idle mode)

Impact on Network Performance: N/A.

SRN Subrack No. Meaning: Number of the subrack where the BTS board is

located.

GUI Value Range: 0~254

Unit: None

Actual Value Range: 0~254

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A.

SN Slot No. Meaning: Number of the slot where the BTS board is located.

GUI Value Range: 0~23

Unit: None

Page 6: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

Actual Value Range: 0~23

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A.

RXUNAME RXU Name Meaning: Name of an RXU

GUI Value Range: None

Unit: None

Actual Value Range: 1~64 characters

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

NewRXUName New RXU

Name

Meaning: New name of the RXU

GUI Value Range: None

Unit: None

Actual Value Range: 1~64 characters

MML Default Value: None

Recommended Value: None

Page 7: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

ISCONFIGTHD Configure

Check

Threshold or

Not

Meaning: If this parameter is set to NO, the default check

threshold corresponding to the RXU specifications is used.

If this parameter is set to YES, the board-level check

threshold is used. The settings of the parameters

BRDTXBW, BRDRXBW must be correct. Otherwise, the

parameter which has never been set will be set to the default

check threshold corresponding to the V1 specifications of the

RXU.

GUI Value Range: NO(NO), YES(YES)

Unit: None

Actual Value Range: YES, NO

MML Default Value: None

Recommended Value: NO(NO)

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

BRDTXBW Forward

Bandwidth

Meaning: Upper threshold of total transmit bandwidth of the

same transmit channel of a board. The differences of

maximum frequency and minimum frequency of the TRXs

that have the same antenna path No. on a board are converted

into bandwidths. Then the bandwidths are compared with the

value of this parameter. For example, if this parameter is set

to 150, the total transmit bandwidth cannot exceed 15 MHz.

All the carriers on a TRX module that is not configured with

antenna path No. are considered to be on the same transmit

Page 8: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

channel.

GUI Value Range: 0~1000

Unit: 100kHz

Actual Value Range: 0~100000

MML Default Value: None

Recommended Value: 150

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

BRDRXBW Receive

Bandwidth

Meaning: Upper threshold of total receive bandwidth of a

board. The difference of maximum frequency and minimum

frequency of TRXs on a board is converted into a bandwidth.

Then the bandwidth is compared with the value of this

parameter. For example, if this parameter is set to 250, the

total receive bandwidth cannot exceed 25 MHz.

GUI Value Range: 0~1000

Unit: 100kHz

Actual Value Range: 0~100000

MML Default Value: None

Recommended Value: 250

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

PWRMODE Power Class Meaning: GSM multi-carrier base station standard. Together

Page 9: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

with the Board Type parameter, this parameter serves as an

index field and uniquely determines an entry of verification

threshold of the transmit bandwidth, receive bandwidth, and

number of TRXs of an RXU board. This parameter is not

used in the MOD BTSRXUBRD command now.

GUI Value Range: CLASS0(Class0), CLASS1(Class1),

CLASS2(MCBTS), MSR(MSR)

Unit: None

Actual Value Range: CLASS0, CLASS1, CLASS2, MSR

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A.

TrxNum TRX Number Meaning: Allowed number of TRXs bound to a board.

GUI Value Range: 0~8

Unit: None

Actual Value Range: 0~8

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A

RXUSPEC RXU Meaning: Specification of an RXU. This parameter specifies

Page 10: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

Specification the RF capability of an RXU. Set this parameter to an

appropriate value based on the type of the RXU. The value

Reserved7(Reserved7) indicates that the specification of the

RXU is RRU3939. The value Reserved8(Reserved8)

indicates that the specification of the RXU is RRU3932.

Other values ReservedXX(ReservedXX) are reserved for

future use. If there is no available specification for an RXU,

set this parameter to OTHER_RXU(Other RXU SPEC).

GUI Value Range: RRU3008_V1(RRU3008 V1 SPEC),

RRU3008_V2(RRU3008 V2 SPEC), RRU3029(RRU3029

SPEC), RRU3908_V1(RRU3908 V1 SPEC),

RRU3908_V2(RRU3908 V2 SPEC),

RRU3920_V1(RRU3920 V1 SPEC),

RRU3922E(RRU3922E SPEC), RRU3926(RRU3926

SPEC), RRU3928(RRU3928 SPEC), RRU3929(RRU3929

SPEC), RRU3936(RRU3936 SPEC), RRU3938(RRU3938

SPEC), RRU3942(RRU3942 SPEC), RRU3960(RRU3960

SPEC), RRU3961(RRU3961 SPEC), GRFU_V1(GRFU V1

SPEC), GRFU_V2(GRFU V2 SPEC), GRFU_V2a(GRFU

V2a SPEC), GRFU_V3(GRFU V3 SPEC), GRFUe(GRFUe

SPEC), MRFU_V1(MRFU V1 SPEC), MRFU_V2(MRFU

V2 SPEC), MRFU_V2a(MRFU V2a SPEC),

MRFU_V3(MRFU V3 SPEC), MRFUd(MRFUd SPEC),

MRFUe(MRFUe SPEC), BTS3900E_V1(BTS3900E V1

SPEC), OTHER_RXU(Other RXU SPEC),

Reserved1(Reserved1), Reserved2(Reserved2),

Reserved3(Reserved3), Reserved4(Reserved4),

Reserved5(Reserved5), Reserved6(Reserved6),

Reserved7(Reserved7), Reserved8(Reserved8),

Reserved9(Reserved9), Reserved10(Reserved10),

Reserved11(Reserved11), Reserved12(Reserved12),

Reserved13(Reserved13), Reserved14(Reserved14),

Reserved15(Reserved15), Reserved16(Reserved16),

Reserved17(Reserved17), Reserved18(Reserved18),

Reserved19(Reserved19), Reserved20(Reserved20),

Reserved21(Reserved21), Reserved22(Reserved22),

Reserved23(Reserved23), Reserved24(Reserved24),

Reserved25(Reserved25), Reserved26(Reserved26),

Reserved27(Reserved27), Reserved28(Reserved28),

Reserved29(Reserved29), Reserved30(Reserved30),

Reserved31(Reserved31), Reserved32(Reserved32),

Reserved33(Reserved33), Reserved34(Reserved34),

Page 11: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

Reserved35(Reserved35), Reserved36(Reserved36),

Reserved37(Reserved37), Reserved38(Reserved38),

Reserved39(Reserved39), Reserved40(Reserved40),

Reserved41(Reserved41), Reserved42(Reserved42),

Reserved43(Reserved43), Reserved44(Reserved44),

Reserved45(Reserved45), Reserved46(Reserved46),

Reserved47(Reserved47), Reserved48(Reserved48),

Reserved49(Reserved49), Reserved50(Reserved50),

Reserved51(Reserved51), Reserved52(Reserved52),

Reserved53(Reserved53), Reserved54(Reserved54),

Reserved55(Reserved55), Reserved56(Reserved56),

Reserved57(Reserved57), Reserved58(Reserved58),

Reserved59(Reserved59), Reserved60(Reserved60),

Reserved61(Reserved61), Reserved62(Reserved62),

Reserved63(Reserved63), Reserved64(Reserved64),

Reserved65(Reserved65), Reserved66(Reserved66),

Reserved67(Reserved67), Reserved68(Reserved68),

Reserved69(Reserved69), Reserved70(Reserved70),

Reserved71(Reserved71), Reserved72(Reserved72),

Reserved73(Reserved73), Reserved74(Reserved74),

Reserved75(Reserved75), Reserved76(Reserved76),

Reserved77(Reserved77), Reserved78(Reserved78),

Reserved79(Reserved79), Reserved80(Reserved80),

Reserved81(Reserved81), Reserved82(Reserved82),

Reserved83(Reserved83), Reserved84(Reserved84),

Reserved85(Reserved85), Reserved86(Reserved86),

Reserved87(Reserved87), Reserved88(Reserved88),

Reserved89(Reserved89), Reserved90(Reserved90),

Reserved91(Reserved91), Reserved92(Reserved92),

Reserved93(Reserved93), Reserved94(Reserved94),

Reserved95(Reserved95), Reserved96(Reserved96),

Reserved97(Reserved97), Reserved98(Reserved98),

Reserved99(Reserved99), Reserved100(Reserved100)

Unit: None

Actual Value Range: RRU3008_V1, RRU3008_V2,

RRU3029, RRU3908_V1, RRU3908_V2, RRU3920_V1,

RRU3922E, RRU3926, RRU3928, RRU3929, RRU3936,

RRU3938, RRU3942, RRU3960, RRU3961, GRFU_V1,

GRFU_V2, GRFU_V2a, GRFU_V3, GRFUe, MRFU_V1,

MRFU_V2, MRFU_V2a, MRFU_V3, MRFUd, MRFUe,

BTS3900E_V1, OTHER_RXU, Reserved1, Reserved2,

Page 12: How to Modify BTS

Parameter ID Parameter

Name

Parameter Description

Reserved3, Reserved4, Reserved5, Reserved6, Reserved7,

Reserved8, Reserved9, Reserved10, Reserved11,

Reserved12, Reserved13, Reserved14, Reserved15,

Reserved16, Reserved17, Reserved18, Reserved19,

Reserved20, Reserved21, Reserved22, Reserved23,

Reserved24, Reserved25, Reserved26, Reserved27,

Reserved28, Reserved29, Reserved30, Reserved31,

Reserved32, Reserved33, Reserved34, Reserved35,

Reserved36, Reserved37, Reserved38, Reserved39,

Reserved40, Reserved41, Reserved42, Reserved43,

Reserved44, Reserved45, Reserved46, Reserved47,

Reserved48, Reserved49, Reserved50, Reserved51,

Reserved52, Reserved53, Reserved54, Reserved55,

Reserved56, Reserved57, Reserved58, Reserved59,

Reserved60, Reserved61, Reserved62, Reserved63,

Reserved64, Reserved65, Reserved66, Reserved67,

Reserved68, Reserved69, Reserved70, Reserved71,

Reserved72, Reserved73, Reserved74, Reserved75,

Reserved76, Reserved77, Reserved78, Reserved79,

Reserved80, Reserved81, Reserved82, Reserved83,

Reserved84, Reserved85, Reserved86, Reserved87,

Reserved88, Reserved89, Reserved90, Reserved91,

Reserved92, Reserved93, Reserved94, Reserved95,

Reserved96, Reserved97, Reserved98, Reserved99,

Reserved100

MML Default Value: None

Recommended Value: None

Parameter Relationship: None

Service Interrupted After Modification: No (And no impact

on the UE in idle mode)

Impact on Network Performance: N/A.