How to manually set your internet connection in Eduroam wired networkPlease follow these instructions only if the automatic configuration from eduroam.tuzvo.sk is not

working for you

1. Right click on Windows icon on bottom left side, then select Computer Management

2. Doubleclick on Wired autoconfig from menu Services and Appications → Services

1

3. Select status type Automatic and then click on Start button, then left click to Apply

4. Right click on network icon and select Open Network and Internet Settings

2

5. Choose Change adapter options

6. Right click to ethernet network and select Properties option

3

7. Select Authentication tab and then set everything like in a image below. Authentication method must be Microsoft: EAP-TTLS. Then left-click on Settings icon

8. Set your setting like in a picture below, then press OK

4

9. Select Additional Settings...

10. Set authentication mode to User authentication and then click on Replace credentials

5

11. Type your eduroam username and password. For our students, username is uis_login@tuzvo.sk, for example novak@tuzvo.sk and the same password as to the UIS (University information system, is.tuzvo.sk). Then confirm everything by pressing OK buttons

12. Right click on Ethernet, disable and re-enable your network adapter

After few seconds, your internet is ready!

6