How to make a CHI-BA+KUN ORIGAMI FACE 1 Start with one sheet of paper, color side down, and fold it into a triangle. 2 Fold in half again horizontally to make a smaller triangle. 3 Pull one of the flaps outward and flatten it to form a diamond. 4 Flip over and repeat step on the other side. 5 Rotate the paper so that the flaps point downward. 6 Fold the left and right corners up so that the edges meet at the center, and unfold. Fold the top corner down and unfold. The three creases you just made will be useful in the next step. 7 Pull one of the flaps upward and flatten it to form a diamond. 8 Turn it over and repeat step 6~7 on the other side. 9 Rotate the paper. Valley fold Mountain fold What you'll need: two square sheets of red origami paper, glue, scissors, a pen

FACEHow to make a CHI-BA+KUN ORIGAMI FACE 1 Start with one sheet of paper, color side down, and fold it into a triangle. 2 Fold in half again horizontally to make a smaller triangle

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

How to make a CHI-BA+KUN ORIGAMI

FACE

1 Start with one sheet of paper, color side down, and fold it into a triangle.

2 Fold in half again horizontally to make a smaller triangle.

3 Pull one of the flaps outward and flatten it to form a diamond.

4 Flip over and repeat step on the other side.

5 Rotate the paper so that the flaps point downward.

6 Fold the left and right corners up so that the edges meet at the center, and unfold. Fold the top corner down and unfold. The three creases you just made will be useful in the next step.

7 Pull one of the flaps upward and flatten it to form a diamond.

8 Turn it over and repeat step 6~7 on the other side.

9 Rotate the paper.

Valley fold

Mountain foldWhat you'll need: two square sheets of red origami paper, glue, scissors, a pen

Page 2: FACEHow to make a CHI-BA+KUN ORIGAMI FACE 1 Start with one sheet of paper, color side down, and fold it into a triangle. 2 Fold in half again horizontally to make a smaller triangle

10 Bring the bottom tip up to the left, making sure that the crease begins from the right corner.

11 Flip it over and bring the bottom tip up to the right, making sure that the crease begins from the left corner.

12 Fold both flaps you just made upward at the center.

13 Bring the front left flap over to the right. Repeat on the other side.

14 Fold the front peak down.

15 Fold the bottom tip so that it touches the intersection.

16 Fold the top part down so that the tip touches the bottom edge of the figure. (It will be unfolded later in [BODY] step 5.)

17 Turn it over.

18 Fold back the bottom tip to make the nose.

19 Draw the eyes, a nose, and a mouth. And now, you have CHI-BA+KUN's face!

Page 3: FACEHow to make a CHI-BA+KUN ORIGAMI FACE 1 Start with one sheet of paper, color side down, and fold it into a triangle. 2 Fold in half again horizontally to make a smaller triangle

BODY

Note: Using the second sheet of paper, repeat steps 1 through 9 of the [FACE].

1 Bring the front right flap over to the left. Repeat on the other side.

2 Fold the bottom tips inward along the mountain fold lines shown in the picture to make CHI-BA+KUN's feet.

3 Cut the front paper from the top partway down the center. Fold down each tip that you just made to the sides diagonally to create hands.

4 CHI-BA+KUN’s body is complete!

5 Now, it's time to connect the face and the body with a bit of glue. Take the face and unfold the flap created in [FACE] step 16. Put glue on the bottom triangle of the face and attach the peak of CHI-BA+KUN's body to it.

6 Glue and fold the top flap downward again.

7 ...and you're done! Here's your CHI-BA+KUN!! (Let CHI-BA+KUN hold a heart-shaped piece of paper, if you'd like ♥)