How to make a 3D How to make a 3D SnowflakeSnowflake

Using recycled paperUsing recycled paper

Step 1.Step 1.

Using template cut Using template cut out 6 additional out 6 additional squares. squares. – (Or 5 and use the (Or 5 and use the

template)template)

Best to choose Best to choose paper that is only paper that is only half printed on. half printed on.

Step 2.Step 2. Fold paper to make Fold paper to make

a triangle and have a triangle and have the folded part to the folded part to the bottom. the bottom.

Using scissors cut Using scissors cut two strips along two strips along bottom edge. (don’t bottom edge. (don’t cut all the way to cut all the way to the other side)the other side)

Once open should Once open should look like so look like so

Step 3. Step 3. Now you want to Now you want to

fold in the edges fold in the edges and tape. I use half and tape. I use half a piece of tape and a piece of tape and it is good. it is good.

Flip over and roll on Flip over and roll on other side. Flip back other side. Flip back to to starting starting

side and do side and do last one.last one.

Do the same to Do the same to remaining 5.remaining 5.

Step 4. Step 4. Take 3 of your petals and staple together.Take 3 of your petals and staple together. Staple other three together.Staple other three together. You might need help for this one. You might need help for this one.

– Take both sides and staple Take both sides and staple

together. together. Use tape pieces to Use tape pieces to

connect the petals to connect the petals to

one another if they are one another if they are

floppy.floppy.

How to make How to make streamersstreamers

Using recycled paperUsing recycled paper

Step 1. Step 1.

Ok so the papers that were not good Ok so the papers that were not good for the first project can be used here. for the first project can be used here.

Fold a paper accordion style till it is Fold a paper accordion style till it is all used up.all used up.– Can fold the paper and cut in two or Can fold the paper and cut in two or

three to make multiple streamers. three to make multiple streamers.

Step 2. Step 2.

On side with ink draw a pattern that you On side with ink draw a pattern that you wish to use. wish to use. – Putting it on this side will make it so that you Putting it on this side will make it so that you

wont see any pencil when it is being displayed. wont see any pencil when it is being displayed. Choose a design that is more of a Choose a design that is more of a

silhouette. Otherwise details will be lost. silhouette. Otherwise details will be lost.

GoodGood BadBad

Step 3.Step 3.

Make sure that there is contact to Make sure that there is contact to each side of the paper. This is so each side of the paper. This is so they will be connected. they will be connected.

Once done cutting unfold and you Once done cutting unfold and you will have a streamer. will have a streamer.