Upload
misha-liang
View
390
Download
33
Embed Size (px)
DESCRIPTION
How to flash VAG Bosch EDC16U34 ECU with V54 FGTech Galletto 4 Master ??V54 FGTech Galletto 4 master is the update version of the galletto 2 V53.FGTech with multi-language and support all cars, trucks, motorcycles, Marine, BDM MPC5xx, EDC17, BDM Boot Mode Tricore, checksum. Autodiagnosticobd have FGTech Galletto 4-Master V54 BDM-TriCore-OBD with BDM Adapters for launched.
Citation preview
How to flash VAG Bosch EDC16U34 ECU with V54 FGTech Galletto 4 Master ??
V54 FGTech Galletto 4 master is the update version of the galletto 2 V53.FGTech with multi-language and support all cars, trucks, motorcycles, Marine, BDM MPC5xx, EDC17, BDM Boot Mode Tricore, checksum. Autodiagnosticobd have FGTech Galletto 4-Master V54 BDM-TriCore-OBD with BDM Adapters for launched.
V54 Fgtech Galletto 4 Master MPC5xx EDC17 BDM-TriCore-OBD
Requirement:
1.V54 FGTech Galletto 4 Master Full Set
2.A laptop running Win XP home
3.Close the anti-virus software
4.cut internet/network connection
Precedure for you to flash a VAG Bosch EDC16U34 ECU:
Step1: Install the V54 FGTech Galletto 4 Master Software.
Step2: Connect the V54 FGTech ECU tuning kit with computer, setup boot and BDM.
Step3: Find out the BDM pads showed on the picture bellow.
Step4: Carefully align with the BDM Port ECU programming spring adapter/probe drop and secure frame.
Step5: Make sure everything is connected correctly, as in your PDF file.
Step6: Run FGtech V54 software, accept the system notice.
Attention: Make sure you have 12V+ feeding FGTECH 4 master main device and the intermediate adapter.
Step7: Switch intermediate adapter to ON, the read LED indicator will flash
Step8: Click the Option list as the order: "Select Driver"=> "BMD-Jtag"=>"Connect".
Step9: The system is building communication between V54 FGTech Galletto 4 Master and computer. If communication is well built, green bar will start loading and finally display ECU information.
Step10: Ready to read and write ECU. Choose "Read Eeprom", follow the system
prompts to read eeprom.Step11: Then select "Write Eeprom", follow the system prompts.
Step12: Turn the switch off when complete write eeprom.Step13: After the programming finished, exit FgTech V54 software program.
This article is compiled by www autodiagnosticobd com, if you have any advice on it, pls feel free to contact autodiagnosticobd - China autodiagnosticobd Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
ADD:1102A,DongMing Business Bldg, Longhua new district, Shenzhen 518113,China
TEL :+86-755-29438109
Email: [email protected]
Facebook: Misha Liang
Whatsapp: +86 13714697738
Skype: eobdscan1
Website: www.autodiagnosticobd.com