Upload
skrilin5
View
3.170
Download
6
Embed Size (px)
DESCRIPTION
How to Disassemble Your N43 Series
Citation preview
How to disassemble your N43 seriesBy Skrilin5 for Notebook review forum
Bottom
- Remove all the screws
- Open the lid under the 2 normal screw to access to the HDD
Long screw
Normal screw
HDD Tray and body screws
HDD tray screw
Normal screw
- Remove all the screws
- Pull the HDD tray from left to right to remove it
RAM Slots
- Remove the screw
- Open the lid under to access to the RAM
CD TRAY
- Remove RAM
- Remove the screw
- Push the CD tray from right to left to remove it
Normal screw
CD reader close body screw
- Remove Body Screw
Body screw close to the battery
- Remove Body Screw
Remove the keyboard- Put a flat screwdriver in the
hole situated at the top of the keyboard to losen it
- There is a cable holding the keyboard to the motherboard.
- Pull the black clip to free the cable and remove the keyboard (see the next photo to see the black clip)
Upper body screw
Normal screw
- Remove all screws
- Pull up the touchpad clip to release the cable to remove the touchpad
Keyboard Clip
Touchpad Clip
Upper body removal
- Insert a plastic card among the yellow line and slide it all around the laptop to unclip all the upper body
Motherboard
- Remove all the screws
Normal screw
Short screw
- Disconnect cable
- Speakers- Display- Power supply- Bluetooth
Motherboard
- Pull gently the motherboard in order to disconnect it to other PCB still screwed to the body
Motherboard
- Pull gently the motherboard in order to disconnect it to other PCB still screwed to the body
Motherboard
Heatsink removal
- Remove all screws
- Disconnect fan cable
Heatsink screw
Cleaning
- Clean old thermal paste on heatsink
- Remove stickers on GPU and CPU
- Clean dies of CPU and GPU
Cleaning
New thermal paste
- Put the new thermal paste on dies (a small amount)
- Put the heatsink back and reassemble everything!
- (my sticker is still dirty because old thermal paste leaked everywhere )