2
601-20 Yeoksam-dong Gangnam-gu Seoul 135-080, KOREA Tel. +82.2.6262.9900 | Fax. +82.2.6262.9999 | [email protected] How to create an error-free result in XOR for other CAD and CAM systems Geometrical erroneous features, short edge, needle like face and twisted face which are caused by the wrong definition of a sketch plane, mistaken sketch entities or the result of inaccurate boolean operation, may bring unexpected errors in other CAD and CAM systems. Especially with CoCreate which uses very tight tolerance system, you need particular attention during modeling to export the result body. The image below shows some geometrical erroneous features. < Abnormal Face> < Stepped Shape > <Extremely Small Edge > Solution To avoid these problems during modeling, you need to have a correct understanding for

How to Create an Error-free Result in XOR for Other CAD and CAM Systems

Embed Size (px)

DESCRIPTION

How to Create an Error-free Result in XOR for Other CAD and CAM Systems

Citation preview

Page 1: How to Create an Error-free Result in XOR for Other CAD and CAM Systems

601-20 Yeoksam-dong Gangnam-gu Seoul 135-080, KOREATel. +82.2.6262.9900 | Fax. +82.2.6262.9999 | [email protected]

How to create an error-free result in XOR for other CAD and CAM systems

Geometrical erroneous features, short edge, needle like face and twisted face which are

caused by the wrong definition of a sketch plane, mistaken sketch entities or the result of

inaccurate boolean operation, may bring unexpected errors in other CAD and CAM

systems. Especially with CoCreate which uses very tight tolerance system, you need

particular attention during modeling to export the result body. The image below shows

some geometrical erroneous features.

< Abnormal Face> < Stepped Shape > <Extremely Small Edge >

Solution

To avoid these problems during modeling, you need to have a correct understanding for

Page 2: How to Create an Error-free Result in XOR for Other CAD and CAM Systems

601-20 Yeoksam-dong Gangnam-gu Seoul 135-080, KOREATel. +82.2.6262.9900 | Fax. +82.2.6262.9999 | [email protected]

scan features, follow the proper modeling process, exactly define a sketch plane, obtain

edges that need to be shared using Convert Entity and do not try immoderate filling gaps.

Remove the extremely small edges

Remove the abnormal surfaces.

Remove the stepped shapes.