Housing Development oDAS Expansion Fiber and Power ...noc.ucsc.edu/docs/Cellular/Crown-Housing-proposal.pdfUniversity of California, Santa Cruz Housing Development oDAS Expansion Fiber

University of California, Santa Cruz

Housing Development oDAS Expansion Fiber and Power Requirements

5/09/2017

Crown Castle Project # 48494267 (Rev.2)

| 2UCSC West Campus Development ProjectProprietary & Confidential

ItemFrequency Bands (AT&T)

700 MHz 850 MHz 1900 MHz 2100 MHz

MIMO or SISO MIMO MIMO MIMO MIMO

# of Sectors per node 1 1 1 1

Number of Node Locations 1

Fiber Count per each node location 8

Proposed Equipment per each Node Location 4) Total Ericsson RRUS (700/850/1900/2100)

Proposed Antenna (Omni/Panel) Amphenol 6876300 (Panel)

Average Antenna Height Lowest: 26.5 ft, Highest: 87.7 ft

oDAS Design Criteria for AT&T: To improve AT&T coverage at the UCSC campus Housing Expansion Location. The coverage objective takes into account future capacity planning, based on the assumptions set forth in the table below.

Executive Summary


ItemFrequency Bands (Verizon)

700 MHz 850 MHz 1900 MHz 2100 MHz

MIMO or SISO MIMO MIMO MIMO MIMO

# of Sectors per node 1 1 1 1



Proposed Equipment per each Node Location 4) Total Ericsson RRUS (700/850/1900/2100)



oDAS Design Criteria for Verizon: To improve Verizon coverage at the UCSC campus Housing Expansion Location. The coverage objective takes into account future capacity planning, based on the assumptions set forth in the table below.


ItemFrequency Bands (Sprint)

800 MHz 1900 MHz

MIMO or SISO MIMO MIMO

# of Sectors per node 1 1



Proposed Equipment per each Node Location 2) Total CommScope ION-M (800/1900)



oDAS Design Criteria for Sprint: To improve Sprint coverage at the UCSC campus Housing Expansion Location. The coverage objective takes into account future capacity planning, based on the assumptions set forth in the table below.


oDAS Design Criteria for T-Mobile: To improve T-Mobile coverage at UCSC campus Housing Expansion area. The coverage objective takes into account future capacity planning, based on the assumptions set forth in the table below.

ItemFrequency Bands (T-Mobile)

1900 MHz 2100MHz

MIMO or SISO MIMO MIMO

# of Sectors per node 1 1



Proposed Equipment per each Node Location 2) Total CommScope ION-M (800/1900)




oDAS Design Criteria: The table below shows the total fiber strands and power consumption required for each proposed node location.

Carrier Fiber Required

Total Required Fiber Per Node

Location

AT&T 8

20Verizon 8

Sprint 4

Verizon / AT&T / Sprint Fiber Requirements

Head-End Hub #1 to Each Node Location

Carrier Fiber Required

Total Required Fiber Per

Node Location

T-Mobile 4 4

T-MobileFiber Requirements

Head-End Hub #2 to Each Node Location

Verizon / AT&T / Sprint / T-MobilePower Requirements Per Each Node Location

Carrier Equipment Type Power Consumption Per Each

Total Required Total Power Consumption

AT&T RRUS 290W 4

4,520 WVerizon RRUS 290W 4

Sprint ION-M 550W 2

T-Mobile ION-M 550W 2


Equipment Specifications

Specification ION-M (Sprint)

Band(s) 800MHz & 1900MHz

Physical dimensions 32.7” (height) x 6.1” (width) x 5.8” (depth)

Weight 20 lbs

Specification ION-M (T-Mobile)

Band(s) 1900MHz & 2100MHz

Physical dimensions 32.7” (height) x 6.1” (width) x 5.8” (depth)

Weight 20 lbs

Specification Ericsson RRUS (AT&T)

Band(s) 700 MHz, 850MHz, 1900 MHz, 2100 MHzPhysical dimensions 20.4” (height) x 18.5” (width) x 7.5” (depth)

Weight 49.4 lbs.

Specification Ericsson RRUS (Verizon)

Band(s) 700 MHz, 850MHz, 1900 MHz, 2100 MHzPhysical dimensions 20.4” (height) x 18.5” (width) x 7.5” (depth)

Weight 49.4 lbs.


Antenna Specifications

Electrical Amphenol 6876300

Frequency (MHz) 690 … 790 … 880 … 960 1710 … 1880 1900 … 2170 2500 … 2690

Gain (dBi) 13.2 … 13.7 … 14.1 … 14.5 16.5 … 16.9 16.9 … 17.3 17.2 … 17.5

Horizontal BW (°) 75 … 73 … 69 … 62 67 64 60

Vertical BW (°) 18.0 … 15.5 … 14.0 … 11.5 7.0 6.5 5.5

VSWR 1.5:1

Polarization (+/- 45°)

Mechanical Amphenol 6876300 850 MHz 2600MHz

Antenna type Tri-band

Dimensions 59.0” (l) x 12.0” (w) x 6.3” (d)

Weight (lbs.) 44.1

Survival wind speed 124 mph

Connectors 6 x 7/16 DIN-Female

Patterns HBW VBW HBW VBW


Proposed Coverage Location


Existing Node Locations


Carrier Hub to Remote Node Fiber Map


Sample Construction Drawings – Stanford University




Sample Construction Site Photos – Stanford University


Sample Construction Site Photo –Sea World San Diego


Equipment Demarcation – Small Cell (AT&T and Verizon)

FiberAggregation Point

Small Cell**

Customer Customer

ANTENNA

Crown Castle

Coax

Customer purchased equipment

Crown Castle purchased equipment

**Demarcation Point between Crown Castle and Customer, excluding the Small Cell equipment

NODE

RRUS Amphenol 6876300


Equipment Demarcation – DAS with Crown POI (Sprint and T-Mobile)

BTS POI HOST UNIT

REMOTEUNIT

Customer Crown Castle Crown Castle Crown Castle

ION-M ION-M

ANTENNA

Crown Castle

Coax CoaxFiberCoax

Customer purchased equipment

Crown purchased equipment

Demarcation Point between Crown Castle and Customer

NODEHUB

ION-M Amphenol 6876300


FOR FURTHER INFORMATION PLEASE CONTACT:

Stephen TurnerSr. RF Engineer(408) [email protected]

Documents

Housing Development oDAS Expansion Fiber and Power ...noc.ucsc.edu/docs/Cellular/Crown-Housing-proposal.pdfUniversity of California, Santa Cruz Housing Development oDAS Expansion Fiber