Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Dedicated To Your Success
980 Series
357 Series
980 Series-High Power
980 Series-Double Zone
HOT RUNNER TEMPERATURECONTROLLERS
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIES
• Intuitive - Logical operator interface. Inputs are made in Shop Terminology.
• Precise - Accurate. Can be easily re-calibrated on the shop floor.
• Helpful - 14 diagnostic messages for start-up and troubleshooting without guesswork. Stores up to 24 job profiles for later recall.
• Reliable - Sturdy construction, tolerant of electrical line variations and harsh environments. patented static cooling keeps airborne dust and contaminants from accumulating inside the housing and affecting performance, drastically reducing maintenance requirements. -
• Adaptive - Adjusts to varying conditions as they develop, constantly re-calculates and checks P.I.D. Parameters, and makes quick revisions if necessary. Self- compensating to continue running if thermocouple fails.
• Responsive - Zones are continuously monitored individually, allowing immediate updating when required.
• Versatile - The ORYCON 357 Series Controllers are designed to be true "plug and go" units. They are available in a variety of voltages and with several styles of connectors.
• Economical -Designed for years of reliable, trouble-free operation, The low initial cost is only one aspect of the value of the ORYCON 357 to any molding operation.
ORYCON 357 Hot Runner Temperature Controllers require no fans and are made to operate in any molding environment.
Because it employs redundant, state-of-the-art microprocessors, proprietary "fuzzy logic", and intuitive operator interface,the ORYCON 357 is a practical tool for handling any Hot Runner Molding task.
12 ZoneUnit
Shown
Te
mp
era
ture
C
on
tro
lle
rs
48
357 SERIES, HOT RUNNER CONTROLLERS
OPERATOR INTERFACE
• STN Color Graphics Touch Screen clearly displays zone set-points and actual temperatures. Cavity zones are displayed as circles and manifold zones are displayed as squares easily set at time of set-up.
• Pressing on an individual zone brings up the full page display for one zone allowing changes to be entered by using an on-screen key- pad or up/down arrows.
• Each zone can be set to operate automatically in closed-loop or in manual mode.
Commands are readily accessible by pressing the permanent icon keys:
HOME - Returns display to Multi-Zone mode.
SET-UP - Allows changes in number of total zones, cavity and manifold assign- ment.
COPY - Allows entering same set point for a selected range of zones.
LINK - Allows two or more zones to use one thermocouple.
PROG - Allows storage and retrieval of job settings - with full on-screen keypad for alpha-numeric input.
HELP - Displays hints for the operation and troubleshooting of current mode.
STOP - Ceases all operation.
WARM - Puts unit in Warm-Up mode for 10 minutes, then resumes normal operation.
RUN - Starts and maintains control operation.
PARK - Reduces all temperature to all zones to 200°F or 100°C for pausing operation.
BOOST - Temporarily increases set points by 200°F or 100°C then resumes normal operation.
GRAPH - Changes display to Bar Graph Mode.
Te
mp
era
ture
C
on
tro
lle
rs
49
FULL CHOICE OF CONNECTORS
ORCUSTOMER'S
CHOICE
12 Zone
24 Zone
36 Zone
Full Color DisplayWith Touch Screen
Static-CooledChassis
IndividualCircuit BreakerFor Each Rack
Alarm On/OffSwitch
AudibleAlarm
ReplaceableModules
Individual PowerSwitch for Each
Zone
Small Footprint23¼" Wide x 6" Deep
SturdyConstruction
Adjustable Tilt
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIES
Stack light
PhaseIndicators
Te
mp
era
ture
C
on
tro
lle
rs
50
357 HOT RUNNER CONTROLLER STANDS
TO ORDER PLEASE SPECIFY
MR357 24
Model No.Number of zones required in multiples of 12 (48 max).
The MR357 series stands are constructed for viewing ease and to suit the user’s preference. They can accept up to four 357 series Mainframes.
Built of heavy gauge steel and supplied with heavy duty casters, the stands are designed for easy maneuverability, convenience, durability, and min-imum footprint.
Special configuration stands can be supplied to customer’s specific requirements. Call Orycon for details.
12 Zone 24 Zones 36 Zones
36 ZonesWith Transformer
Te
mp
era
ture
C
on
tro
lle
rs
51
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIESSystem Ordering Information
357-e - 12 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
12 Zone Unit
Includes:1ea. - Primary Mainframe with modules1ea. - Set of 12 zone cables
24 Zone Unit
Includes:1ea. - Primary Mainframe with modules1ea. - Secondary Mainframes with modules2ea. - Sets of 12 zone cables
36 Zone Unit
Includes:1ea. - Primary Mainframe with modules2ea.- Secondary Mainframes with modules3ea. - Sets of 12 zone cables
Model No.
No. Of Zones
Cable Type (Please Specify)
*Customer’s Choice
TO ORDER PLEASE SPECIFY
357-e - 24 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable Type (Please Specify)
*Customer’s Choice
357-e - 36 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable Type (Please Specify)
*Customer’s Choice
Te
mp
era
ture
C
on
tro
lle
rs
52
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIESSystem Ordering Information
MainframeStands
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIESSystem Ordering Information
MainframeStands
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIESSystem Ordering Information
MainframeStands
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIESSystem Ordering Information
MainframeStands
MULTI-ZONE, HOT RUNNER CONTROLLERS
357 SERIESSystem Ordering Information
MainframeStands
48 Zone Unit
Includes:1ea. - Primary Mainframe with modules3ea. - Secondary Mainframes with modules4ea. - Sets of 12 zone cables
357-e - 48 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable Type (Please Specify)
*Customer’s Choice
TO ORDER PLEASE SPECIFY
MR357 - 12 - T
Model No.
No. Of Zones12, 24, 36, 48
Transformer (If required)
Standard Units shipped in kit form.
Transformer Units (T Option)shipped assembled and include:
Power Disconnect 6" heavy duty castors
Te
mp
era
ture
C
on
tro
lle
rs
53
MULTI-ZONE, HOT RUNNER CONTROLLERS
THE 980 GENERATION
The ORYCON 980 Generation Temperature Controllers are designed specifically for Hot Runner Molding applications.Like all other models in the ORYCON family of controllers they are made to operate under harsh manufacturing conditions.
Powerful state-of-the-art microprocessor, coupled with proprietary "fuzzy logic", offer the molder a practical tool to help handle the most demanding Hot Runner Molding jobs with ease.
Intuitive - User friendly operation.
Precise - Accurate, stable circuitry performs like a lab instrument - can be easily re-calibrated by user.
Helpful - 14 diagnostic messages for start-up and troubleshooting without guesswork. Self- compensating to continue running if thermocouple fails or if other problems develop.
Reliable - Mechanically sturdy, highly tolerant of electrical line variations and extremes in environment. Patented static cooling keeps airborne dust and contaminants from accumulating inside the housing and affecting circuitry, drastically reducing maintenance requirements.
Adaptive - Adjusts to varying conditions as they develop, constantly re-calculates and checks P.I.D. parameters, makes quick revisions if necessary.
Responsive - Commands are tailored to user requirements, changes in settings and feedback are displayed in "real time" mode.
Versatile - The ORYCON 980 Series Controllers can be used as part of a larger system without requiring special cabinetry and wiring. They are designed to be true "plug and go" units. In addition they can be used in conjunction with a multi-zone Computer Control, in which case changes and adjustments can be made either locally at the module, often preferable when setting up and starting a mold, or from a Computer screen, as is convenient once the mold is running.
Practical - Although it possesses a high degree of sophistication, it is mainly a helpful, durable and easy to use tool.
Economical -Competitive pricing is only one aspect of the cost factor of the 980 Series Controllers. When combined with years of reliable and trouble-free operation, convenience and flexibility, they are the most cost-effective Hot Runner Controllers on the market today.
The following are some of the features of the ORYCON 980 Series Controllers:
Te
mp
era
ture
C
on
tro
lle
rs
54
MULTI-ZONE, HOT RUNNER CONTROLLERS
THE 980 GENERATION
2 ZoneModel 980F2
(supplied with double5 pin connectors)
6 ZoneModel 980F6
9 ZoneModel 980F9
12 ZoneModel 980F12
Main CircuitBreaker
Sturdy AluminumHousing
Heat SinkRS232 com port ‡
(in rear)
GlobalWarm-UpDisable
Zone *Selector
AMP Meter *
Zone * Indicator
Alarmon/off switch
AudibleAlarm
Copy AllSet-Points
Link AllSet-Points
Incrementally
MULTI-ZONE, HOT RUNNER CONTROLLERS
THE 980 GENERATION
2 ZoneModel 980F2
(supplied with double5 pin connectors)
6 ZoneModel 980F6
9 ZoneModel 980F9
12 ZoneModel 980F12
Main CircuitBreaker
Sturdy AluminumHousing
Heat SinkRS232 com port ‡
(in rear)
GlobalWarm-UpDisable
Zone *Selector
AMP Meter *
Zone * Indicator
Alarmon/off switch
AudibleAlarm
Copy AllSet-Points
Link AllSet-Points
Incrementally
4 Types of Control Modules Available
DiagnosticsChart
MAINFRAMES
Mold CablesConnect in Rear
* [A] option‡ [RS] option
The small footprint Model 980 Mainframes accept only 980 Series Modules. Supplied with 18" long power cord ready to be wired to customer's 3 phase connector. They can be stacked to achieve the number of zones required. Units are statically cooled by patented heat sink system that prevents dust and contaminants from fouling the circuitry.
TO ORDER PLEASE SPECIFY
980F 12 N A RS
Model
No. of Zones
Cable Connector:"N" for ORYCON 980 Standard"D" for D-M-E Standard"S" Customer Choice (describe)
"A" Amp display "O" No Amp Display
"RS" Com Port"OO" No Com Port
ORYCON 980 standard connectors are ruggedized aluminum die-cast, double-latch, single connector for power and thermocouple with gold-plated thermocouple pins.
(see WN Control Cables)
Te
mp
era
ture
C
on
tro
lle
rs
55
TEMPERATURE CONTROLMODULES
980 GENERATION
15 AMPS MAX LOAD FEATURES
• Intuitive, user-friendly instructions for basic operation, easy to remember commands for full diagnostics display• State-of-the-art, updated powerful microproces- sor based with fast responding proprietary " fuzzy logic" • Field calibration by user• 15 diagnostic messages make it easy to troubleshoot, start-up and operate • Auto averaging with memory for continued operation without thermocouple continuously recalculating P.I.D.• Boost feature for quickly raising temperature to 200° above set point with automatic return to original set point • Can interface with remote or local PC for a variety of additional features including ISO 9000 requirements, SPC, and Production Control• Dual set-up ability either from PC or front panel• Current sensing and monitoring ability with display of zone AMPS when current is at 100% or load at the time inquiry is made by pressing the "down" and "closed/open loop" buttons simultaneously• Rugged, durable, instrument quality accuracy• Easily visible set-point and actual temperature display• Two pole switch cuts off both legs of power to heater
Set PointDisplay
ActualTemperature
Display
DeviationIndicators
Closed/Open Loop
Selector
BoostButton
Two PolePower Switch
SettingUp & Down
Buttons
Easy PullHandle
Captive Fastener
TO ORDER PLEASE SPECIFY
980C J F 1 A
Model
Calibration"J" for Type J Thermocouple"K" for Type K Thermocouple Scale
"F" for Fahrenheit"C" for Centigrade
Communications"1" with communications and local/remote setting"O" no communications
Current Sensing"A" with current sensing"O" no sensing
Te
mp
era
ture
C
on
tro
lle
rs
56
TEMPERATURE CONTROLMODULES
980 GENERATION
30 AMP Max Load
Model 980CH control modules have all the features of the 980C. The circuitry and software are designed to handle heavier current loads. The fuse is accessible directly from the front panel for increased convenience. They are intended to operate only in Model 980FH6 high amperage mainframes. The power switch cuts off one side of the line while the other side is fused with a KTK fast-acting fuse for better protection of the circuit. Specifically designed to control temperature of Hot Runner Manifolds, they respond more directly to the conditions characteristic of larger systems.
In operation, the unit checks for load, time of temperature rise, and automatically adapts to the conditions of the mold to maintain a uniform and stable temperature.
980FH6 WNH6-12
Mainframes and Mold Cables.
Note: 980CH modules require high amperage
TO ORDER PLEASE SPECIFY
980CH J F 1 AModel
Calibration"J" for Type J Thermocouple"K" for Type K Thermocouple
Scale"F" for Fahrenheit"C" for Centigrade
Communications"1" with communications and local/remote setting"O" no communications
Current Sensing"A" with current sensing"O" no sensing
High Amperage Mainframe High Amperage Cable
Te
mp
era
ture
C
on
tro
lle
rs
57
TEMPERATURE CONTROLMODULES
980 GENERATION
INITIALWARM-UP
AVERAGEPOWER
OPEN T/C *
OPEN FUSE
OPEN HEATER *
OPEN T/COR HEATER
REVERSEDT/C
SHORTEDT/C
BOOSTMODE
MANUALOPERATION
READINGPRESENT AMPS *
FULL LOADZONE CURRENT *
CALIBRATINGP.I.D. ROUTINE NO.
END OFCALIBRATION
YOURPREFERRED
CONTROLLER
MODEL 980 DIAGNOSTIC MESSAGES
* OPTIONAL
Te
mp
era
ture
C
on
tro
lle
rs
58
MODEL 980F-02 SINGLE AND DOUBLE ZONE
TEMPERATURE CONTROLLER HOUSING
MODEL 980FH-01 SINGLE ZONE 30 AMP
TEMPERATURE CONTROLLER HOUSING
MODEL 980F-02 SINGLE AND DOUBLE ZONE
TEMPERATURE CONTROLLER HOUSING
MODEL 980FH-01 SINGLE ZONE 30 AMP
TEMPERATURE CONTROLLER HOUSING
TO ORDER PLEASE SPECIFY
Carrying Handle
RemovableMountingBrackets
48" Power Cord
Diagnostic Chart
5 Pin ConnectorStandard
Other Connectors Available on Request
HOUSES: 1 each 980C series 15 AMP control module and 1 blank panel OR: 2 each 980C series 15 AMP control modules980F-02 N
Model "N" for Orycon 980 Standard"S" for Customer's Choice
HOUSES: 1 each 980CH series 30 AMP control module
Note:Control Modules must be selected and ordered separately.
Note: Control Module must be selected and ordered separately.
Housing supplied with 12' Long Power and T/C Cable
TO ORDER PLEASE SPECIFY
980FH-01 N
Model "N" for Orycon 980 Standard"S" for Customer's Choice
Each Housing is supplied with two 5 Pin Connectors for
Power and T/C
48" Power Cord
.
Heavy-Duty Powerand T/C Connector
MatingConnector
Flying Leads(To be fitted with Mold Connector
by Customer)
Te
mp
era
ture
C
on
tro
lle
rs
59
MODEL 980F-02 & 980FH-01 SINGLE AND DOUBLE ZONE
TEMPERATURE CONTROLLER HOUSING
980F-01
980 SERIESSystem Ordering Information
Single Zone Unit15 AMP
Includes:1ea. - 15 AMP Housing with module1ea. - set of cables
Double Zone Unit15 AMP
Includes:1ea. - 15 AMP Housing with two modules1ea. - set of cables
Single Zone Unit30 AMP
Includes:1ea. - 30 AMP Housing with module1ea. - set of cables
980F - 1 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
TO ORDER PLEASE SPECIFY
980F - 2 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
980FH - 1 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
Te
mp
era
ture
C
on
tro
lle
rs
60
MULTI-ZONE, HOT RUNNER CONTROLLERS
980 SERIESSystem Ordering Information
9 Zone Unit
Includes:1ea. - Primary Mainframe with modules1ea. - set of cables
18 Zone Unit
Includes:1ea. - Primary Mainframe with modules1ea. - Secondary Mainframe with modules1ea. - set of cables
27 Zone Unit
Includes:1ea. - Primary Mainframe with modules2ea. - Secondary Mainframes with modules1ea. - set of cables
980 - 09 - WN12-12
WN9-12WN9-20W8-10P/T(8 zones per set)W8-20P/T(8 zones per set)CC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
TO ORDER PLEASE SPECIFY
980 - 18 - WN12-12
Model No.
No. Of Zones
980 - 27 - WN12-12
Model No.
No. Of Zones
WN9-12WN9-20W8-10P/T(8 zones per set)W8-20P/T(8 zones per set)CC*
Cable (Please Specify)
*Customer’s Choice
WN9-12WN9-20W8-10P/T(8 zones per set)W8-20P/T(8 zones per set)CC*
Cable (Please Specify)
*Customer’s Choice
Te
mp
era
ture
C
on
tro
lle
rs
61
MULTI-ZONE, HOT RUNNER CONTROLLERS
980 SERIESSystem Ordering Information
12 Zone Unit
Includes:1ea. - Primary Mainframe with modules1ea. - set of cables
24 Zone Unit
Includes:1ea. - Primary Mainframe with modules1ea. - Secondary Mainframe with modules1ea. - set of cables
36 Zone Unit
Includes:1ea. - Primary Mainframe with modules2ea. - Secondary Mainframes with modules1ea. - set of cables
980 - 12 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
TO ORDER PLEASE SPECIFY
980 - 24 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
980 - 36 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
Te
mp
era
ture
C
on
tro
lle
rs
62
MULTI-ZONE, HOT RUNNER CONTROLLERS
980 SERIESSystem Ordering Information
48 Zones
Includes:4 - 12 zone Mainframe48 - 980C-J-C1A Modules1 - set of cables
980 - 48 - WN12-12
WN12-12WN12-20W12-10P/TW12-20P/TCC*
Model No.
No. Of Zones
Cable (Please Specify)
*Customer’s Choice
TO ORDER PLEASE SPECIFY
MR980 - 12 - T
Model No.
No. Of Zones12, 24, 36, 48
Transformer (If required)
MainframeStands
Standard Units shipped in kit form.
Transformer Units (T Option)shipped assembled and include:
Power Disconnect 6" heavy duty castors
Te
mp
era
ture
C
on
tro
lle
rs
63
CONTROL CABLES
Made for convenience and long service, ORYCON control cables are rugged and resistant to abuse. By incorporating both power and thermocouple lines into one single cable, they help avoid clutter around the press.
CATALOG NO.
CATALOG NO.
NO. OFZONES
NO. OFZONES
LENGTH(mm)
LENGTH(mm)
W9-12
W9-20
W12-12
W12-20
WN9-12
WN9-20
WN12-12
WN12-20
WN6-12
WN6-20
9
9
12
12
9
9
12
12
6
6
3640
6080
3640
6080
3640
6080
3640
6080
3640
6080
MAX LOAD
MAX LOAD
15 Amps
20 Amps
FEATURES
1. Single, heavily insulated cable for power and thermocouple2. Heavy duty aluminum die-cast housing3. Double latches secure firmly to mold4. Heavy duty power pins5. Gold plated thermocouple pins to reduce error
1
2
5
3
4
FEATURES
1. Single, heavily insulated cable for power and thermocouples2. Snap-in latching fasteners3. Steel connector housing for longer life4. Tin plated power pins5. Gold plated thermocouple pins
STANDARD CABLES FOR THC-240 SERIES CONTROLLERS
STANDARD CABLES FOR 980 SERIES CONTROLLERS
1
2
3
4
5
Heavy duty 30 Amps
Te
mp
era
ture
C
on
tro
lle
rs
64
ALTERNATE CONTROL CABLES
CATALOG NO. NO. OFZONES
LENGTH(mm)
POWER CABLES
Cables for any required configuration can be supplied.
For details, call ORYCON
THERMOCOUPLE CABLES
Alternate control cables are supplied for customer convenience in order to connect Orycon controllers to existing molds outfitted with competitors' connectors. They are exact replacements for D-M-E* cables.
W8-10T
W8-20T
W12-10T
W12-20T
8
8
12
12
3040
6080
3040
6080
CATALOG NO. NO. OFZONES
LENGTH(mm)
W8-10P
W8-20P
W12-10P
W12-20P
8
8
12
12
3040
6080
3040
6080
CATALOG NO. NO. OFZONES
LENGTH(mm)
WN8-12D
WN8-20D
WN12-12D
WN12-20D
8
8
12
12
3640
6080
3640
6080
Mold End
Standard D-M-E*Power Connector
Standard D-M-E*Thermocouple Connector
Controller EndStandard ORYCONWN Series Connector
*Registered Trademark of D-M-E Co., Detroit, MI.
Te
mp
era
ture
C
on
tro
lle
rs
65
PWC 5SHOWN
CONNECTORS
THERMOCOUPLE MOLD CONNECTORS
The TCC series connectors conform to NEMA type 4 and NEMA type 12 specifications. They are polarized and provided with a latch for positive retention of the mating connector. Zone location and polarity are marked. Screw terminals are located on the underside for wire assembly.
TCC Connector shown at right and the PWC series (below) mate with ORYCON Adapter Cables. Models W9-12D, W9-20D, W12-20D, WN8-12D and WN12-12D.
POWER MOLD CONNECTORS 15 AMP MAX
The PWC series connectors also conform to NEMA Type 4 and Type 12 specifications. They have a latching clamp and are configured for one way insertion. Contact pins are crimped and supplied with 6" of wire with zone marker, as well as the appropriate quantity of insulated crimp connectors required for quick wiring.
INPUT POWER CONNECTORS FOR MAINFRAMES
Three phase input connectors are suited for the ORYCON Mainframes described below. Call ORYCON for information on other applications.
WP 240-30 WS 240-30 WP 240-50 WS 240-50
CATALOG NO.
NO. OFZONES
TCC 5
TCC 8
TCC 12
5
8
12
83,0
103,0
130,0
32,0
32,0
32,0
28,6
28,6
28,6
DIM. A(mm)
DIM. B(mm)
DIM. C(mm)
CATALOG NO.
NO. OFZONES
PWC 5
PWC 8
PWC 12
5
8
12
86,0
86,0
86,0
17,5
17,5
17,5
20,7
20,7
20,7
DIM. A(mm)
DIM. B(mm)
DIM. C(mm)
CATALOG NO.
WP 240-30
WS 240-30
WP 240-50
WS 240-50
30 3Ø mm
30 3Ø mm
50 3Ø mm
50 3Ø mm
Male
Female
Male
Female
RATED AMPS GENDER
TCC 8SHOWN
BA
C
C
BA
Te
mp
era
ture
C
on
tro
lle
rs
66
MOLD JUNCTION BOXES
with connectors
One very important aspect of controlling temperature in a Hot Runner System is the wiring. Often this proves to be the weak link of a system. ORYCON Mold Junction Boxes are designed to simplify wiring, save time in testing and troubleshooting and improve the reliability of the Hot Runner System they are used in. No special tools are required. The terminal blocks have compression washers that allow a secure connection simply by slipping the wires under and tightening the screws.
FEATURES
1. Recessed Power and Thermocouple Connector2. Connector Guard3. Terminal Blocks - one side for Power, one side for Thermocouples4. Double Latches5. Heavy Gauge Steel Construction
FEATURES
1. Ruggedized Power and Thermocouple Connector2. Die-cast Connector Housing3. Easy wiring Terminal Blocks - one side for Power, one side for Thermocouples4. Double Latches for positive hold5. Heavy Gauge Steel Construction
CATALOG NO. NO. OFZONES
LxWxH MAX LOAD
J-240-910
J-240-1210
J-240-430S
J-240-630
9
12
4
6
15 Amp/Zone
30 Amp/Zone
J-240 FOR THC-240 SERIES CONTROLLERS
J-980-920
J-980-630
J-980-1220
CATALOG NO. NO. OFZONES
LxWxH MAX LOAD
9
6
12
20 Amp/Zone
30 Amp/Zone
20 Amp/Zone
J-980 FOR 980 SERIES CONTROLLERS
1
2
3
4
5
4
3
2
1
5
ALL MODELS83 x 166 x 172
83 x 135 x 129
83 x 135 x 153
83 x 135 x 129
83 x 135 x 160
67mm89mm
MOUNTING HOLE PATTERNUSE M4 SCREWS
78mm146mm
63,5mm
Te
mp
era
ture
C
on
tro
lle
rs
67
CATALOG NO. NO. OFZONES
LxWxH MAX LOAD
5
8
12
10 Amp/Zone
10 Amp/Zone
10 Amp/Zone
ALL MODELS120 x 152 x 120H
CATALOG NO. NO. OFZONES
LxWxH MAX LOAD
5
8
12
16 Amp/Zone
16 Amp/Zone
16 Amp/Zone
J357-D FOR HOT RUNNER CONTROLLERSSupplied wired with crimp splicers and adjustable mounting tabs.
CATALOG NO. NO. OFZONES
LxWxH MAX LOAD
5
8
12
16 Amp/Zone
16 Amp/Zone
16 Amp/Zone
J357-M2Double Latch Connector
Power - Double Row Male T/C - Double Row Female
J357-M1 FOR HOT RUNNER CONTROLLERSSupplied wired with adjustable mounting tabs.
J357-M1Single Latch Connector
Power - Double Row Male T/C - Double Row Female
J357-DSingle Latch Connector
Power - 25 pin male T/C - Double Row male
MOLD JUNCTION BOXES
TYPE J-357 with connectors• Maximum Flexibility • Ample Access,
• Small Footprint • Heavy-Duty Steel Construction
J357-M2 FOR HOT RUNNER CONTROLLERSSupplied wired with adjustable mounting tabs.
J357-M2-516
J357-M2-816
J357-M2-1216
J357-M1-516
J357-M1-816
J357-M1-1216
J357-D-510
J357-D-810
J357-D-1210
4 holes for direct mounting to mold
Use M6 screws for adjustable mounting tabs
All locationssymmetrical
wire exit
MOUNTING HOLE PATTERN
Te
mp
era
ture
C
on
tro
lle
rs
68
ALL MODELS120 x 152 x 120H
ALL MODELS120 x 152 x 120H
Controllers-2006.pdfPage 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12Page 13Page 14Page 15Page 16Page 17Page 18Page 19Page 20Page 21
CNTRLR COVER.pdfPage 1