Horizontal Systems

7/29/2019 Horizontal Systems

1/8

Horizontal LifelineSystems

Engineered to give workersthe mobility they want whileproviding the safety they need

Hor izont al syst ems for any applicat ion

NEWFROMDBIS

ALA

SO 9001

hat the guys up therewant to wear

/


2/8USA 1.800.328.6146

2 horizontal lifeline systems

Designed to give workers the mobil it y they want and the safety t hey need.

A horizontal lifeline system may appear to be a basicline strung between two anchors. It is not! Properengineering is critical to ensure a safe lifeline. Failureof a lifeline system can cause serious injury or evendeath.Typical failures involve improper calculation ofclearance,no account for sag in the lifeline,misun-derstanding of anchorage strength, and location.

Calculating clearance and fall distance is crucial toensuring worker safety.Many factors must be consid-ered,d-ring height and movement, cable sag anddeflection, shock absorber length and extension,initialanchorage height, and distance to lower obstructions.Horizontal systems that have not endured rigorousengineering and testing can not possibly predictthese factors and are extremely dangerous.

In any homemade lifeline system some sag in thelifeline is inevitable.While it may not seem like animportant detail, the amount of sag amplifies theforces on your end anchors. In a system with only 5degrees of sag the forces on the anchorage would be5 times higher than those for the worker.If the work-er was exposed to 1,800 lbs.arresting force theanchorage connectors would be subjected to 9,000lbs.each.To meet the minimum safety factor of two,for an engineered system,each anchor must supportat least 18,000 lbs.

DBI/SALA takes the guesswork out of putting togeth-er a horizontal fall protection system.Each of oursystems has been engineered to met the demands ofthe workplace and meets OSHA and ANSI require-ments. With four unique systems you are sure tofind a solution to your individual requirements and asafe alternative to unengineered products.

Horizontal Lifeline

Systems


3/8iron wing

Iron Wing

Heavy Duty Por table

Horizontal Lifeline Systems

Iron Wing systems are designed for situations

where extremely long or mult iple spans areneeded or when larger beams are presentduring heavy construction, bridge work, on piperacks,etc.The easy to install and fully customizableIron Wing System is carefully engineered for con-tinuous fall protection while giving you freedom ofmovement. Choose from standard models to fitbeams up to 1-1/4 thick and 6-12 wide,or selectoptional components to fit up to 3 thick and up to24 wide beams.

DBI/SALAs 3-point claw/contact system offers relia-bility without tie-back, reducing trip fall hazards. Theall metallic system,designed for durability and safety,includes a 3/8" 7x19 galvanized cable lifeline offsetfrom the beam by 12 inches for easy passage andelevated 40 inches high for use as a hand rail.Engineered for convenience as well as safety, you canpurchase a complete turnkey system or custom-design a system to fit your specific job requirements.

7000020

Two lightweight IronWing stanchions(anchors)

Internal in-line energyabsorber 20 ft. cable assembly withturnbuckle

Fastening hardware Standard size fits flanges6"-12" wide and up to 1-1/4" thick

Optional adapters fit 12-18 or 18-24wide

Instructional video

Similar Models:

7000030: 30 ft. system7000040: 40 ft. system

7000050: 50 ft. system7000060: 60 ft. system

Custom ize Your Own System

7006606: Stanchion with energy absorber7006608: Stanchion - Intermediate7006602: Stanchion - Standard7000000: Cable assembly with turnbuckle,20 ft - 100 ft lengths

available in 10 ft. increments,(last three digits in partnumber detail length).

7001000: Cable with swage fitting,20 ft - 100 ft lengths availablein 10 ft. increments,(last three digits in part numberdetail length).

Bridge Const ruct ion

Delta Harness 1103321Shockwave2 Shock Absorbing Lanyard 1224306Custom Iron Wing System

H o r i z o nt a l L i f el i ne Syst e m s


4/8

Cable Sayf line

Compact All M etal HorizontalLifeline Systems

Highly portable system, ideal in situat ions wherewelding, sparks or harsh environment s arepresent or where minimal clearance exists.This all metal system is durable enough to be left inplace for long periods of time and light enough to bemoved easily from one job to another.

The included Zorbit energy absorber allows you touse a standard 5,000 lb. rated anchorage connectorsuch as our tie-off adaptor, fixed beam anchor,D-ringanchorage plate,etc.

7602020 Sayf lineCable HorizontalLif eline system

Cable lifeline assembly Turnbuckle to tension Zorbit energy absorber Cable grip 20 ft. long

Similar Models:7602030: 30 ft. system7602040: 40 ft. system7602050: 50 ft. system7602060: 60 ft. system7602070: 70 ft. system7602080: 80 ft. system7602090: 90 ft. system7602100: 100 ft. system

Plant M aintenance

Delta Harness 1102000ShockWave 2Shock Absorbing

Lanyard 1224306Sayfline System 7602020

USA 1.800.328.61464 cable sayfline


Construction


5/8sayfline


7600020 Sayf lineSynthetic H orizontalLif eline System

Easily installed with no specia

tools or equipment Lightweight ,only 12 lbs. Rope lifeline assembly withtensioner

Two t ie-off adapters 20 ft. long Carrying/storage bag

Similar Models:

7600030: 30 ft. system7600040: 40 ft. system7600050: 50 ft. system7600060: 60 ft. system

Sayfline

Lightweight SyntheticHorizontal Lifeline Systems

Sayfline horizontal systems are not onlylight-weight and easy to insta ll, they are also

ext remely por table.They are ideal for temporaryapplications such as maintenance,painting or bill-board work where the system will be left in place fora few minutes up to several weeks. Just disassembleand take to the next job.Engineered with DBI/SALAsattention to quality and detail, the Sayfline systemswill work alongside you with absolute safety and reli-ability.

Plant M aintenance

Delta Harness 1102000EZ StopShock Absorbing Lanyard 1220006Sayfline System 7600020Fixed Beam Anchors 2108406

Maintenance


6/8beamsafeUSA 1.800.328.6146

6


USA 1.800.328.6146

BeamSafe

Por table HorizontalLifeline Systems

BeamSafe is an excellent choice for building andbridge construction where spans of 60 feet or less

are needed.Designed with the help of craftsmen inthe field, the BeamSafe systemgives you aneasy-to-install tie-of f point before flooring orother fall prot ect ion is available. Position theBeamSafe system almost anywhere on a beam forboth fall protection and as a hand-rail for balance--for up to two people. Installing the system is quickand easy, requiring just a standard wrench to assem-ble the two bolts and a safety strap. Each lightweightstanchion,weighing less than 35 lbs.,mounts at a 19degree angle from the base to keep it out of the waywhile walking the beam.

7400520 Comp leteBeamSafe System

Two BeamSafestanchions (anchors)

Zorbit energy absorber withturnbuckle

20 ft. cable assembly Fastening hardware Standard size fits flanges 6-1/2"- 24" wide;up to 3/4" thick

Optional adapter fits to 26"wide; 2-1/4" thick

Instructional videoSimilar Models:

7400530: 30 ft. system7400540: 40 ft. system7400550: 50 ft. system7400560: 60 ft. system

Steel Erect ion/Construct ion

Delta Harness 1102000Body Belt 1000054Shockwave2 Shock Absorbing Lanyard 1224306BeamSafe System 7400520

Bridge Construction


7/8zorbit

Shock A bsor ber

7401031 Zorbit Kits

Allows you to customizeyour own system safely

Zorbit energy absorber 2 shackles 2 bolts/nuts

Similar Models:

7401032: with turnbuckle7401033: with turnbuckle,thimble and cable clips (justadd your own cable)

Zorbit

Shock Absorber for HorizontalLifelines

Weveadded safet y and t aken the guessworkout of put ting together your own horizontal

lif eline system.Can you answer the following ques-tions? How much clearance do I need? How willlifeline sag and span distance affect the safety of mysystem? What forces will be generated on my endanchors? Do my anchorage connectors and supportstructure have sufficient strength?

Now you can. This revolutionary new shock absorberfeatured on our Beamsafe and cable Sayfline sys-tems is also available separately. In situations wherea competent person understands the requirementsneeded,Zorbit can be attached to your own sys-

tem to bring safety to a previously unsafe system.

Commercial Constr uction

Delta Harness 1103321Shockwave2 Shock Absorbing Lanyard 1224306Zorbit with contractor supplied horizontal lifeline

Construction


8/8

Safety Systems

Construct ion/M aintenance

Delta Harness 1102000ShockWave 2Shock Absorbing

Lanyard 1224306Glyder Sliding Beam Anchor

2110808

Steel Erect ion

Delta Harness 1102429

Force2Shock Absorbing Lanyard1225006

Glyder Sliding Beam Anchor2110808

General Const ruct ion

Delta Harness 1102000TalonSelf Retracting Lifeline

3101001Fixed Beam Anchor 2108406

Concrete Wall-Form Wor kDelta Harness 1101643Wall Form Hook Assembly

5904350Sealed Self Retracting Lifeline

3403400

General Indust ry/Const ruct ion

Adjust-A-Net Infinitely Adjustable

Fall Protection and DebrisContainment System 4100100

General Indust ry/Const ruct ion

Vertical Net Debris Containment andGuardrail System 4100003

With 25 years of fall protection expertise,we offer the broadest

line of safety equipment in the industry; including harnesses,

shock absorbing lanyards,self-retracting lifelines,rescue and

retrieval equipment, netting and more! We engineer all safety

systems to meet (and exceed) every code! The DBI/SALA team

works with you to design and construct a system engineered for

maximum safety and comfort every time!

Specialized Safety Systemsdesigned for the wayyou work.

Contact us todayPhone: 800-328-6146 Fax: 651-388-5065

Website:www.dbisala.com

In Canada call 800-387-7484

Form:9700003 Rev:A

Documents

Horizontal Systems