-
7/28/2019 HOP DAU CAP ha the.rtf
1/3
HCMCPC
SPECIFICATION
TERMINATION KIT FOR 0.6/1KV 3x95+1x50mm2 or3x50+1x25mm2
CABLE
I. SCOPE :
This specification covers the supply of outdoor terminations
withaccessories for 0.6/1KV - 3x95+1x50mm2 or 3x50+1x25mm2
cable.
II. STANDARD OF MANUFACTURE AND TEST :
VDE 0278 : Power cable accessories with rated voltage up to
30KV.
III. DESCRIPTION :
1. The termination shall be of outdoor, heat or cold shrink type
used tomake the cable termination for underground cable
0.6/1KV.
2. Technical characteristics of cable :
- Insulation of cable : XLPE- Voltage rating : 0.6/1KV- Core
size :
+ 3x95 + 1x50 mm2
+ 3x50 + 1x25 mm2
- Conductor material : Copper
- Armour : Steel wires- Outside diameter of cable 3x95 + 1x50
mm2 : 43mm- Outside diameter of cable 3x50 + 1x25 mm2 : 37mm
3. Technical requirement :
- AC withstand voltage : 4KV AC for 15 minute between
eachconductor and other conductor.
- Impulse voltage withstand :+ 10 positive impulses : 8KV+ 10
negative impulses : 8KV
- Load cycling : According to VDE 0278- DC voltage withstand :
15KV for 5 minutes.
4. Accessories :
Description 3x95 + 1x50 3x50 + 1x25
Copper crimp lugs forcopper conductor
+ 3 for conductor of95mm2+ 1 for conductor of50mm2
+ 3 for conductor of50mm2+ 1 for conductor of25mm2
IV. TESTING REQUIREMENT :
1. Type testing items :
/var/www/apps/conversion/tmp/scratch_1/138238355.rtf 1/4
-
7/28/2019 HOP DAU CAP ha the.rtf
2/3
HCMCPC
SPECIFICATION
TERMINATION KIT FOR 0.6/1KV 3x95+1x50mm2 or3x50+1x25mm2
CABLE
- AC voltage withstand test.- Loading cycle test.- Impulse
voltage withstand test.- Thermal short circuit test.- DC voltage
withstand test.
2. Requirements :
In order to ensure the quality of supplied goods , in case of
bid winning ,the Tenderer shall supply copies of type test report
met the following
requirements:
Type test report shall be approved by an lawful, reputable,
independenttesting laboratory with the following content :
- Testing sample : The same as the supplied item
(manufacturer,original country, manufactures code as specified in
tender document).
- Testing items : Including testing items as specified in
SectionIV.1 of this specification.
- Testing values shall be corresponding values as stated in
Section IIIof this specification. If in section III, there are no
corresponding values,
testing values will be selected according to the standard
specified insection II of this specification.
V. REQUIREMENT OF TENDER TECHNICAL DOCUMENT :
- Technical description, data sheets, catalogues and other
materialsubmitted with the quotation must enable the buyers
engineers tothoroughly evaluate the proposals as to its compliance
with the inquiryspecifications.
- Minimum requirements :
+ Detailed summary of deviations to inquiry specification+
Completed inquiry data sheet expressed at section VI+ Catalogues
containing outline dimensions, electrical data and
installation details+ Certificate of quality management.
- The proposal bidding has Type Test Report which meets the
requirementsas specified in item IV 2.b will be preferable .
VI. DATA SHEET :
No
DESCRIPTION UNITREQUIREME
TENDERED
/var/www/apps/conversion/tmp/scratch_1/138238355.rtf 2/4
-
7/28/2019 HOP DAU CAP ha the.rtf
3/3
HCMCPC
SPECIFICATION
TERMINATION KIT FOR 0.6/1KV 3x95+1x50mm2 or3x50+1x25mm2
CABLE
NTS
1. Item No.
2.
DC voltage withstand for 5min.
KV 15
15.
Accessories :
- 3 copper crimp lugs forconductor of 95mm2 and 1copper crimp
lug forconductor of 50mm2.
Yes
- 3 copper crimp lugs forconductor of 50mm2 and 1copper crimp
lug forconductor of 25mm2.
Yes
/var/www/apps/conversion/tmp/scratch_1/138238355.rtf 3/4
