Hodzic Emil CV 2015

Curriculum Vitae

Personal information

First name / Surname Emil Hodzic

Address(es) Krsiniceva 12 ,51000 Rijeka, CroatiaTelephone(s) Mobile: +385958599684

Fax(es)E-mail [email protected]

Nationality CroatianDate of birth 29. March. 1980.

Gender Male

Medical fitness Certificate

16.04.2014.- 16.04.2016

Fit for offshore duty

Yes Dr. Terence TilneyOil and Gas UK Medical Guidelines

Page 1/13 - Curriculum vitae of Surname(s) First name(s)

For more information on Europass go to http://europass.cedefop.europa.eu© European Communities, 2003 20060628

Work Experience

Position Senior Electrician Oil Drilling Rig

nameNoble Paul Romano

Type of Rig SemisubmersibleDates 29.04.2012 – 01.03.2015

Name and Address

Noble International 13135 S. Dairy Ashford RdSugar Land TX 77478 USA

Main activities and responsibilities

Maintenance team- Maintenance Semisubmersible Rig- Ordering and installing El. equipment- Shipyard project and Drilling well- Design EVA 4000- Classification ABS +A1, Column Stabilized Drilling Unit, CRC- Water Depth 6,000 ft. - Drilling Depth 25,000 ft. - Variable Deck Load 8,000 kips - Hook Load 1,500 kips - Setback Capacity 1,000 kips- Quarters Capacity 122 - Draft (Operating/Transit) 79 ft. / 16 ft. Moonpool 22 ft. x 20 ft. - Depth 130 ft. Length 348 ft. Breadth 328 ft.

Equipment

-Lighting Pauluhn Hazardous Locations-Lifeboat & Davit system Alexander/Ryan-HP Compressors Raw Winch and Hoist-Air Compressors Quincy-HDI 2000 B Drilling Instrumentations-Hartzell fan general ventilation systems-AC Units Carrier -Galley equipment-Gai Tronics-EX Registry-Devon Oil Centrifuge-Elevator Champ U 900-Craneman Gantry crane-Sonardyne transponder-Alfa laval exchanger- Derrick Dreco; 170 ft. x 40 ft. x 40 ft.; 1,928 kips - Drawworks National Oilwell E3000; 3,000 hp - Top Drive Varco TDS-4S; 85,000 ft-lbs max continuous torque - Rotary Continental Emsco T6050 - Iron Roughneck NOV AR 3200 - BOP Shaffer SLX; 5 ram; 18-3/4 in x 15k psi w/ Shaffer Spherical 18-3/4 in x 10k psi annular - Motion Compensator Shaffer 600K CMC - Riser Tensioner/Stoke (10) Shaffer; 160 kips/ea.; 50 ft. line travel - Riser Details (2) Shaffer DT; 75 ft. - LMRP (1) Shaffer Spherical 18-3/4 in x 10 psi annular - Control System Shaffer MUX System - Pipe Handling Systems NOV PRS-4I - Solids Control System (5) Thule VSM300 - Diverter Vetco KFDS-500 - Tree Storage/Handling N/A - Cranes Dreco 65 mt. - Mud Pumps National Oilwell PT-1700; 1,700 HP - Engines EMD 12-645-ESB-Emergency Generator Kato ,Engine Caterpillar D 399-Ross Hill SCR Room- Station Keeping Moored 9 legs (10,500 ft. wire x 4250 K5 chain)



Position Senior Electrician Saipem 10 000 DrillshipOil Drillship name SAIPEM 10 000

Type DrillshipDates 26.12.2011.-28.04.2012.

Name and Address

GPS (Saipem)Uetlibergstrasse 134 a8045 ZurichSwitzerland


Maintenance team- 5th generation ultra deepwater drillship

Built by Samsung Heavy Industries Shipyard in Geoje, South Korea (2000)- Classification:

ABS +A1 (E), drilling unit, +FPSO, +AMS, +ACCU, +DPS-3, OMBO, DLA, +CDS, E- Design criteria:

Water depth: up to 10,000 ftDrilling depth: 9,144 mVariable deck load: 20,000 t

- Cranes; 4 Hydralift knuckle boom cranes. Rated capacity: 85 t @ 18.4 m rad.- Drawworks; 2 Wirth GH 4500 EG, powered by 3 GE GEB 22A1 AC electric motors,

1,420 HP each- Mud pumps; 4 Wirth TPK 71/2”. Rated input power: 2,200 HP each- Rotary table; 2 Wirth RTSS, max. opening 601/2”, hydraulic driven. Rated capacity:

1,000 t- Top drive; 2 Hydralift HPS 750 2E, rated capacity: 750 t – 7,500 psi w.p., powered by

2 GE GEB 20 B2 1,150 HP AC electric motors- Derrick: Bailey Dynamic double derrick, 200 ft high, 80 x 60 ft base, 60 x 20 ft top.

Static hook load capacity: 2,000 kips- Power system generators; 6 Wartsila NSD CO 18V32LNE 7,000 kW coupled with

ABB HSG900XU10 8,750 kvA. Total power generation: 42,000 kW- Thrusters; 6 azimuthal thrusters, each driven by one 4,000 kW electric motor- Crew facilities; Air conditioned living quarters for 172 people

Position Senior Electrician Perro Negro 8Oil Drilling Rig Perro Negro 8

Type of Rig JackupDates 20.10.2010.-01.12.2011.

Name and address GPS (Saipem)Uetlibergstrasse 134 a8045 ZurichSwitzerland


Maintenance team-Classification- ABS - Class notation 1A1 self elevating unit-Drawworks- National Oilwell Varco, 3,000 hp, SSDG 3000, AC driven1¾” drilling line, fitted with disc brakes-Rotary table- National Oilwell Varco, 49½”, 726 metric tons, 46,000 ft/lbs,torque-Top Drive- National Oilwell Varco, 680 metric tons, 7,500 psi, 1,000+hp, DC driven, TDS 8-Power system generators- Five Caterpillar main diesel engines 3516 @ 1,604 kW- Five Kato main generators @ 1,604 kW, 690 V/3 phase 60 Hz- One Caterpillar diesel emergency generator 3516 @ 1,604 kW

- maintenance;

-GustoMSC Rack and Pinion Jacking system type GDRLL-100 LL / 6 ,54 pinions driven by El. Motor through input –planetary gearbox, fixation system type 5000 ;



-PM(Preventive maintenance program) -Checking El. Motors, Insulation test, Resistance, Amps, Heater, Thermistor motor protection, Ground wire connection, general stage of El. Motor, check silicon grease around covers to prevent water ingress, check connection and glands,-Checking El. Brake for El. Motors,-Checking cables from VFD Control system to El. Motors on Legs,-Checking VFD Control system, Drives ,fuses, relays, transformer -Top drive-Draworks-HPU ringline pumps and centrifugal pumps- oil cooling motors-shakers-screw conveyor -desilter pump-desander pump-degasser unit-degasser pump-trip tank pump-strip tank pump-triplex pumps for koomey unit ABB motors Finland 86 kW-beakon alarm unit-Rig air compressor SULLAIR LS-200 S-Bulk air comopressor SULLAIR LS-200 S-AC units Frigotechnica-Switchboard MCC rooms Main,Emergency and Drilling-Cranes Favell-Flood lights-Camera system-Gas alarms and fire alarms-Anchor winches-Breaking resistors-Skidding unit-Fixation systems for legs-Lifeboats-Davit system-Emergency generator-Pollution tank -Chiller system-UPS-High pressure washing machine-Kitchen equipment-Laundry-Television system-Acommodation equipment-Welder workshop equipment-Jacket water circulating pumps Sency machinery &electric 9 kW-Water maker Alfa laval type DP U-36-C125 Cap =50-Oil water separator Jowa 15 ppm-Bilge alarm system-Mud pumps-charging pumps-chain oilers-mixing pumps-agitators-base oil pumps-main fire pump TECO 90 kW-em. fire pump-jockey fire pump TECO 30 kW-foam deluge fire pump TECO 90 Kw-sanitary water hidrophore TECO 15 HP



-water cooling generator service pump TECO 50 HP-ballast pump TECO 50 HP-SPRINKLER pump TECO 75 HP-Sewage treatment plant Ham worthy water systems-portable water pressure set TECO 15 HP-hot water maker OSO Norway-hot water circulating pumps TECO-water mist fire pump VEM-Garbage compactor DELITEK AS Norway-water boilers-raw water pumps Saer elettropompe 132 kW-UV sterilizer Jowa -main generator-fuel pumps-drill water pumps TECO 37 kW-main air dryer SULLAIR C 1616-main dryer bulk SULLAIR C 1616

Position Electrician D.R.Steward Jack upOil Drilling Rig D.R. Steward

Type of Rig JackupDates 08.08.2010-20.10.2010

Name and address of employer

TransoceanLimited 25/28 North Wall QuayDublinIreland


Ready stack for all electrical equipment on jackup rig-Draw works-Oilwell E-3000 double drum, 2000 HP input with Elmagco 7838 auxiliary brake-Top Drive-Varco TDS-4S with PH-85 pipehandler-Rotary-National C-495, 49˝in with independent drive-Mud Pumps-2 x Oilwell A1700-PT, 1600 hp each -Shale Shakers-1 x Brandt Dual Tandem ATL-CS; 2 x Brandt Linear Shakers -Desilter-1 x Brandt SE-16-Mud cleaner-1 x Brandt ATL-MC16 Mud Cleaner-Main power-2 x EMD 16-645-E8 & 1 x EMD 12-645-E8 engines driving EMD AB20-6 1400 kW generator each -Emergency power-1 x Caterpillar 3408A, 275 kW, 480 V turbocharged generator set-Power distribution-Ross Hill 1600 SCR, 3 generator controls, 4 x 1800 amps SCR bridges -Deck Cranes-3 x MLT PCM-120AS electric cranes, 100 ft boom 50 st @ 24 ft; 1 x National OS-45, 100 ft boom 30 st @ 15 ft -Jacking system-Electric rack and pinion system, 16 pinions per leg -Winches-4 x LeTourneau W-1500 electric winches

Position Electrician Oil Drilling Rig Key Manhattan

Type of Rig JackupDates 15.09.2009 – 08.08.2010


TransoceanLimited 25/28 North Wall QuayDublin 1Ireland


-Drawworks-National 1625 DE, 3,000 hp, driven by two GE 752 DC motors, complete with Elmago 7838 electric brake-Rotary table-National C-375, with independent drive using a GE 752 DC motor with 2-speed transmission-Top drive-Varco Model TDS-3, 500 ton, with a PH-60 pipehandler, rated to 26,400 ft.-lbs. continuous drilling torque-Mud pumps-Three National 12-P-160, 1,600 HP triplex pumps, each driven by two GE 752 DC traction motors



-Jacking system-MLT electrically driven rack and pinion system,Maintenance El. Motors and Control panels-Emergency generator-One Caterpillar D-3412, 320 Kw-Power DC equipment-Four Baylor SCR units, each rated at 1,400 amps, powering eight GE 752 DC motors-Power AC equipment-Three EMD 16-645-EB diesel engines, 2,200 hp, driving three EMD 2.625 kva generators-Cranes-Four MLT PCM-120 AS cranes with 100 ft. booms, rated for 50 tons at 24 ft. radius-cold stack G.H.Galloway jack up rig-“Ready to drill team” in shipyard on jack up rig Key Manhattan-Safety paper work(PTW,start observation,think plan)-Energy isolation certificate (isolation equipment)-Repair and preventive maintenance on DWKS-Install new brake on DWKS with mechanic-PM on Elmagco brake and cooling system-repair lights on all rig-replace dc motor top drive-repair on drillers console-install the airplane light on crown on derrick-PM on RT-PM on el. cranes-install transformers, EM lights, AC units, limit switches on cranes -install new cables-install flame boom system-PM on jack up system-install shakers and safety equipment-install auger-PM on control panel in SCR room-PM on main generators and Em. generators-PM on rig air compressors-Work with mechanic on bilge systems-install bilge pump el. MotorsInstall drill water pump el. Motors-change impeller in pumps-change valves-install welding machine-install batt. Charger for forklift-test Oil water separatorPM and change el. Motor on Omnipure-Change Mud mixing pump-change gadges on silos-change charging pump el.motor-PM on mud pump-change el.motor for auger in pit room-test fire pumps-PM on Em. generator-PM on smoke detector system and fire alarm-PM on batteries on rig-install TV system-PM fog system-PM Obstruction light-Work on washers and dryers-Install new installation in accommodation- Damage control for weekly drill

Position Electrician G.H. GallowayOil Drilling Rig G.H. Galloway

Type of Rig JackupDates 05.08.2008 – 15.09.2009

Name and address TransoceanPage 6/13 - Curriculum vitae of

Surname(s) First name(s) For more information on Europass go to http://europass.cedefop.europa.eu© European Communities, 2003 20060628

of employer Limited 25/28 North Wall QuayDublin 1Ireland


-Drawworks-Oilwell E-3000, 2000 hp input; Elmagco 7820-CL auxiliary brake-Top Drive-Varco TDS-3, 500 tons -Rotary table-National C375, 37½in opening, independent drive-Mud Pumps-2 x National 12-P-160, 1600 hp each-Shale Shakers-3 x Brandt Retro-FS tandem basket shakers-Desander-Brandt Mdl SRS-3, 3 cones-Desilter-28 cones-Main Power-2 x EMD 16-645-E8 driving 1550 kW genset each; 1 x EMD 12-645-E8 driving a 1150 kW genset -Emergency generator-1 x Caterpillar D-3408 driving 1 x 300 kW AC generator-Power distribution-Ross-Hill SCR System with three generators control and 4 x 1800 A SCR bridges -Deck cranes-3 x Skagit Model 363, 100 ft. boom, 50 tons @ 30 ft.-Jacking system-National electric drive rack and pinion, maintenance El. Motors and control panels-Winches-4 x Skagit JUW-075 single drum-Paper work; Start card, Written think plan, Energy isolation certificate, Permit to work-Isolating electrical equipment-Repair “Speedqueen” dryer machine-Wiring cable-PM (preventive maintenance) on lifeboats-PM on A/C Units-PM on leg motors (bow ,port, stbd side)-Grounding 3rd parts units-Repair “Vema-static” water gun-PM on cranes-Testing gas detectors(LEL AND H2S)-Test smoke detectors-Repair “Scotsman” touchfree icemaker-PM on portable el. Tools-Repair exhaust-PM on forklift-PM deepwell pump-PM navigations lamps-PM portable gas detectors-Repair top auger-Repair trip tank pump-PM on drawworks motors-Install new helideck lamps-PM on mudpumps-Changing bearings on el. motor “US motors”-Checking Elmagco brake and Topdrive-PM anchor winches-PM emergency generator -PM jacking unit-Installing LCD TV-Installing PC-Housekeeping-Daily check off el. equipment-Installing radio antenna-Installing lamps-PM on el. refrigerator and freezer-Installing power supply

Position ElectricianDates 04.2003 - 02.2008


Control EngineeringIvana Zorza 39Rijeka

Type of business and sector

Engineering


-Installing El. Equipment-Measurement systems-Pump systems-Maintenance El. Motors-Sensor water systems-Antenna systems



-Sales El. Components and equipment

Position Electrician in ShipyardDates 01.12.2000.-31.05.2002.


Eldos Elektrika,Pulska 2,Rijeka,Croatia (www.lenac.hr)


-Eldos elektrika is subcontractor in shipyard “Viktor Lenac” in Rijeka,Croatia-Repair El. Motors, pumps ,generator, ship equipment-Install Control panels-Pulling new cables-Connecting power supply-Maintenance lighting-Install navigation systems

Type of business or sector

Ships

Education and training

Dates 03.01.2015Name of

organizationNoble Drilling

Type of education or training

Dangerous Goods Training

Certificate NumberDuration of Certificate


organizationFALCK Safety Services


FOET incl. HUET (OPITO)

Certificate Number 61835858231014442363Duration of Certificate

09.11.2018


organizationFALCK Safety Services


Norwegian Oil and Gas upgrade



organizationIADC

Type of Education or Training

PATH KSA Performance Program

Certificate Number Duration of Certificate




organizationBritannia Petroleum Limited Zeefax London

Type of Education or Training

SCR Course


Dates 28-30.04.2014Name of

organizationDHTC


Coxswain MOB Course

Certificate Number Nogepa 2.3a/2.7acDuration of Certificate

01.05.2016

Dates 12.-17.01.2014Name of

organizationCool Concerns Ltd


FGAS 2079-101

Certificate Number 5501017956/20Duration of Certificate


organizationCompex EX Certificate


EX01 EX02 EX03 EX04

Certificate Number 2013068NECDuration of Certificate

28.02.2018


organizationSURVIVEX Aberdeen


ISO140001 , ABRASIVE WHEELS,VHF,HELIDECK ASST.,GAS DETECTION ,CONFINED SPACE ,GANTRY CRANE ,BANKSMAN SLINGER ,

Certificate Number VariousDuration of Certificate


organizationABB


800Xa DCS Distributed Control Systems


Unlimited




organization MARPOL Training institute


Meeting MARPOL Standards Annex I II III IV V VI and waste management



organizationMAERSK


Confined space entry and gas detection

Certificate Number CS2013NC-058Duration of Certificate

10.07.2015

Dates 07.2012Name of

organizationSurvivex Aberdeen


Working at Heights, Waste Management ,VHF / UHF Radio ,Spill Awareness ,Scissor Lift ,Risk Assessment ,Rigging and lifting ,Permit to Work ,Manual handling, Man Ridding winch ,LOLER, Helicopter refuelling , H2S ,Gas detection ,COSHH ,BANKSMAN ,ABRASSIVE WHEELS


Dates 23.01.2012.-26.01.2012Name of

organizationAPT Pavia Italy


Team member


25.01.2014.

Dates 24.10.2011.-26.10.2011.Name of

organizationC.G.T. Engine division, Vercelli, Italy


Caterpillar Operations and maintenance course

Certificate Number 3516BDuration of Certificate

Unlimited



Dates 05.07.2011.Name of

organizationEnerMech -OPITO


-Banksman and slinger-Rigging and lifting-Use of manriding, Tuggers, Billy Pugh-Manual handling-Hand and eye injury-JSA Risk assessment-Confined space-MSDS-Mobile elevators work platforms-Noise awareness-Working at height-Forklift operator-PPE and safety signs.


05.07.2013.

Dates 1994-1997(3 years education)Name of

organizationElectrical-industry and vocational school in Rijeka, Croatia


Electrical engineer in industry

Certificate Number 2170-56-01-97-B-8 (Diploma of final exam translated to English by permanent Court interpreter)

Duration of Certificate

Unlimited


organizationFalck Nutec


Basic Offshore Safety Induction and Emergency Training (OPITO),including HUET plus Emergency Breathing System


Refresher before 09.11.2014.


organizationFalck Nutec


H2S Introduction (NOGEPA 0.8)


Refresher before 07.11.2014.


organizationTransocean KMN 2010-07-01


Electrician OJT Module


Unlimited


organizationMinistry of Maritime affairs, transport and communications, Republic of Croatia

Type of education & training

Basic training STCW VI/1

Duration of 23.07.2015.Page 11/13 - Curriculum vitae of


certificate


organizationRepublic of Croatia Ministry of the sea


Boat skipper Category B


Unlimited


organizationTransocean


Dropped objects & pressure testing awareness


Unlimited

Dates 02.2009.Name of

organizationTransocean


Safety leadership foundation


Unlimited


organizationMinistry of Maritime affairs, transport and communications, Republic of Croatia


Basic training

Certificate Number 050013770 STCW VI/1Duration of Certificate

Unlimited

Dates 09.06.-16.06.2008.Name of

organizationFaculty of Maritime Studies in Rijeka ,Croatia


Fire-fighting training

Certificate Number STCW A-VI/1Duration of Certificate

Unlimited

Dates 09.06.-16.06.2008.Name of

organizationFaculty of Maritime Studies in Rijeka, Croatia


Personal survival


Unlimited

Dates 09.06.-16.06.2008.Name of



Personal safety and social responsibility

Certificate Number STCW A-VI/1Page 12/13 - Curriculum vitae of



Unlimited

Dates 09.06.-16.06.2008.Name of



Basic first aid


Unlimited

Personal skills

Mother tongue(s)Croatian

Other language(s) EnglishUnderstanding Speaking Writing

Listening Reading Spoken interaction

Spoken production

English Very good

Very good

Very good

Very good

Very good

Social skills and competences

-I am antismoker -dynamic, communicative and flexible person -was working with every nationality of people -ready for extra training and drill

Organizational skills and

competences

In shipyard “Viktor Lenac” I was team leader of 5 electrician. I always see what need to be done and then organise my team to do work.

Technical skills and competences

Brazing, welding, whetting ,painting ,wood joinery

Computer skills and competences

I have PC at home and know work with Windows 7,VISTA,XP PRO, Microsoft office word, Excel ,PowerPoint, Outlook Express, Internet Explorer ,Windows messenger ,Adobe Reader and Nero burning room, RMS ,SAP

Other skills and competences

-My hobby is my boat and my motorcycle Ducati Panigale

Driving license Driving license ; A1,A,B,F,G,MReferences 1) Kevin Davis , Rig Maintenance Supervisor Noble Paul Romano ,

[email protected] , Office U.S. 281-325-7552 2)Holland Penton , Rig Maintenance Supervisor Noble Paul Romano, Office U.S. 281-325-7552 3)Richard Langston ,Electronic technician Senior , [email protected] U.S. +1 832-364-4927



mailto:[email protected]

mailto:[email protected]

Documents

Hodzic Emil CV 2015