Hocus Pocus · 2019. 5. 28. · Hocus Pocus Finished Wall Hanging Size: 35 x 47 Finished Place Mat Size: 15 x 17 ¾ 49 West 37th Street, New York, NY 10018 tel: 212-686-5194 fax:

Hocus PocusHocus Pocus

Finished Wall Hanging Size: 35” x 47”Finished Place Mat Size: 15 ⅜” x 17 ¾”

49 West 37th Street, New York, NY 10018tel: 212-686-5194 fax: 212-532-3525

Toll Free: 800-294-9495www.henryglassfabrics.net

Please check our website for pattern updates before starting this project.

Skill Level: Intermediate

A Free Project SheetNOT FOR RESALE By City Art Studio

Proj

ect D

esig

ns b

y H

eidi

Prid

emor

e

Table Set

Hocus PocusFabrics in the Collection

Finished Wall Hanging Size: 35” x 47”Finished Place Mat Size: 15 ⅜” x 17 ¾”

Select Fabrics from the Modern Melody Basics Collection

Table Set

Panel - Black1642PM-99

Flying Bats - Gray1645M-9

Flying Bats - Purple1645M-55

Stripe - Gray1646M-9

Thunderstorm - Gray1647M-9

Tossed Pumpkins - Orange1648M-89

Tossed Pumpkins - Black1648M-99

Tossed Spiderweb - White1649M-1

Tossed Spiderweb - Black1649M-99

Tossed Stars - Black1650M-99

Orange1063-34

Black1063-99

Allover Haunted NightGray – 1643M-9

Allover Haunted NightPurple – 1643M-55

Honeycomb HalloweenBlack – 1644M-99

Hocus Pocus Table Set

Wall Hanging Cutting Instructions Please note: all strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

Fig. 5

Fig. 3 Fig. 4

Fig. 1

Fig. 2

Fig. 6

Wall Hanging Materials1 panel 24” Panel - Black (A) 1642PM-99½ yard Modern Melody Basics - Black (B) 1063-99*⅜ yard Modern Melody Basics - Orange (C) 1063-34⅔ yard Tossed Spiderweb - White (D) 1649M-1¼ yard Tossed Pumpkins - Black (E) 1648M-99¼ yard Tossed Stars - Black (F) 1650M-99¼ yard Flying Bats - Gray (G) 1645M-91 ⅓ yards Flying Bats - Purple (H) 1645M-55 3 ⅛ yards Allover Haunted Night - Purple (Backing) 1643M-55

*Includes binding

From the 24” Panel - Black (A):• Fussy cut (1) 22 ¼” x 33 ¼” panel.

From the Modern Melody Basics - Black (B), cut:• (5) 2 ½” x WOF strips for the binding.

From the Modern Melody Basics - Orange (C), cut:• (2) 2” x 33 ¼” strips.• (2) 2 ½” x 25 ¼” strips.

From the Tossed Spiderweb - White (D), cut:• (3) 4 ⅞” x WOF strips. Sub-cut (14) 4 ⅞” squares.• (1) 5 ¼” x WOF strip. Sub-cut (1) 5 ¼” square and (4) 4 ½” squares. Cut the 5 ¼” square across both diagonals to make (4) triangles.

From the Tossed Pumpkins - Black (E), cut:• (1) 4 ⅞” x WOF strip. Sub-cut (6) 4 ⅞” squares.

From the Tossed Stars - Black (F), cut:• (1) 5 ¼” x WOF strip. Sub-cut (1) 5 ¼” square and (4) 4 ⅞” squares. Cut the 5 ¼” square across both diagonals to make (4) triangles. Note: Only (2) triangles will be used.

From the Flying Bats - Gray (G), cut:• (1) 4 ⅞” x WOF strip. Sub-cut (4) 4 ⅞” squares.

From the Flying Bats - Purple (H), cut:• (2) 2” x 44 ½” Length of Fabric (LOF) strips.• (2) 2” x 35 ½” WOF strips from the remaining fabric. • (1) 5 ¼” square. Cut the square across both diagonals to make (4) triangles. Note: Only (2) triangles will be used.

From the Allover Haunted Night - Purple (Backing), cut:• (2) 55” x WOF strips for the backing. Sew the strips together and trim to make the 43” x 55” back.

Center Block

A

C C

C

C

Trim blockto measure

24 ½” x 36 ½”AFTER adding

borders.

Unit 1make 4

G

GD

D

Unit 2make 12

ED

Unit 3make 8

FD

Block Assembly1. Sew (1) 2” x 33 ¼” Fabric C strip to each side of the 22 ¼” x 33 ¼” Fabric A panel. Sew (1) 2 ½” x 25 ¼” Fabric C strip to the top and to the bottom of the Fabric A panel. Trim the block to measure 24 ½” x 36 ½” to make the Center Block (Fig. 1).

Note: The arrows in Figure 4 and Figures 9-16 denote fabric print direction. Pay attention to the orientation of the fabric.

2. Place (1) 4 ⅞” Fabric D square on top of (1) 4 ⅞” Fabric G square, right sides together. Draw a line across the diagonal of the top square from the upper right corner to the lower left corner (Fig. 2). Sew ¼” away from each side of the drawn diagonal line (Fig. 2). Cut the (2) squares apart on the drawn diagonal line (Fig. 3) to make (2) half-square triangles. Trim the half-square triangles to measure 4 ½” square to make (2) Unit 1 squares (Fig. 4). Repeat to make (4) Unit 1 squares total.

3. Repeat Step 2 and refer to Figures 5-6 for fabric identification, placement and seam direction to make (12) 4 ½” Unit 2 squares and (8) 4 ½” Unit 3 squares.


Fig. 8 Fig. 9

Fig. 10 Fig. 11

Fig. 12

Fig. 13

Fig. 14 Fig. 15

Fig. 7

Unit 4make 4

G

GD

D

Unit 5

FHD

D

Unit 6

HFD

D

Top BorderUnit 1Unit 2 Unit 2Unit 3 Unit 3Unit 4

D D

Bottom Border

Unit 2 Unit 3 Unit 3 Unit 2Unit 4Unit 1D D

Left SideBorder

Unit 3

Unit 3

Unit 2

Unit 2

Unit 2

Unit 2

Unit 4Unit

5

Unit 1

Right SideBorder

Unit 3

Unit 3

Unit 2

Unit 2

Unit 2

Unit 2

Unit6

Unit 4

Unit 1

4. Place (1) 4 ⅞” Fabric D square on top of (1) 4 ⅞” Fabric G square, right sides together. Draw a line across the diagonal of the top square from the upper left corner to the lower right corner (Fig. 7). Sew ¼” away from each side of the drawn diagonal line (Fig. 7). Cut the (2) squares apart on the drawn diagonal line (Fig. 8) to make (2) half-square triangles. Trim the half-square triangles to measure 4 ½” square to make (2) Unit 4 squares (Fig. 9). Repeat to make (4) Unit 4 squares total.

5. Sew (1) Fabric H triangle, (2) Fabric D triangles and (1) Fabric F triangle together to make (1) Unit 5 square (Fig. 10). Trim unit to measure 4 ½” square.

7. Sew together (1) 4 ½” Fabric D square, (1) Unit 2 square, (1) Unit 3 square, (1) Unit 4 square, (1) Unit 1 square, (1) Unit 3 square, (1) Unit 2 square and (1) 4 ½” Fabric D square, in that order, to make the Top Border (Fig. 12). Pay attention to the unit orientations.

8. Sew together (1) 4 ½” Fabric D square, (1) Unit 2 square, (1) Unit 3 square, (1) Unit 1 square, (1) Unit 4 square, (1) Unit 3 square, (1) Unit 2 square and (1) 4 ½” Fabric D square, in that order, to make the Bottom Border (Fig. 13). Pay attention to the unit orientations.

9. Sew together (1) Unit 2 square, (1) Unit 3 square, (1) Unit 2 square, (1) Unit 4 square, (1) Unit 5 square, (1) Unit 1 square, (1) Unit 2 square, (1) Unit 3 square and (1) Unit 2 square, in that order, to make the Left Side Border (Fig. 14). Pay attention to the unit orientations.

10. Sew together (1) Unit 2 square, (1) Unit 3 square, (1) Unit 2 square, (1) Unit 1 square, (1) Unit 6 square, (1) Unit 4 square, (1) Unit 2 square, (1) Unit 3 square and (1) Unit 2 square, in that order, to make the Right Side Border (Fig. 15). Pay attention to the unit orientations.

6. Sew (1) Fabric F triangle, (2) Fabric D triangles and (1) Fabric H triangle together to make (1) Unit 6 square (Fig. 11). Trim unit to measure 4 ½” square.


Fig. 16

Wall Hanging Top Assembly (Follow Figure 16 while assembling the top.)11. Sew the Left Side Border and the Right Side Border to the left and to the right side of the Center Block. Sew the Top Border and the Bottom Border to the top and to the bottom of the Center Block.

12. Sew (1) 2” x 44 ½” Fabric H strip to each side of the Center Block. Sew (1) 2” x 35 ½” Fabric H strip to the top and to the bottom of the Center Block to make the Wall Hanging top.

13. Layer and quilt as desired.

14. Sew the (5) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

15. Bind as desired.

Wall Hanging Layout

Center BlockH H

H

H


Unit 7make 3

BCDE

Unit 8make 12

Unit 7

Unit 9make 3

BGH F

Fig. 18Fig. 17

Fig. 19 Fig. 20

Place Mat Materials½ yard Allover Haunted Night - Purple (A) 1643M-551 ⅛ yards Tossed Stars - Black (B) 1650M-99*¼ yard Flying Bats - Gray (C) 1645M-9¼ yard Tossed Pumpkins - Orange (D) 1648M-89¼ yard Flying Bats - Purple (E) 1645M-55¼ yard Tossed Spiderweb - White (F) 1649M-1¼ yard Thunderstorm - Gray (G) 1647M-9¼ yard Tossed Pumpkins - Black (H) 1648M-991 ⅓ yards Honeycomb Halloween - Black (Backing) 1644M-99

*Includes binding

Place Mat Cutting Instructions Please note: all strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Allover Haunted Night - Purple (A):• Fussy cut (4) 6 ½” squares each centered on an image of your choice.

From the Tossed Stars - Black (B), cut:• (6) 2 ½” x WOF strips.• (8) 2 ½” x WOF strips for the binding.

From the Flying Bats - Gray (C), cut:• (3) 1 ¾” x WOF strips.

From the Tossed Pumpkins - Orange (D), cut:• (3) 1 ¾” x WOF strips.

From the Flying Bats - Purple (E), cut:• (3) 1 ¾” x WOF strips.

From the Tossed Spiderweb - White (F), cut:• (3) 1 ¾” x WOF strips.

From the Thunderstorm - Gray (G), cut:• (3) 1 ¾” x WOF strips.

From the Tossed Pumpkins - Black (H), cut:• (3) 1 ¾” x WOF strips.

From the Honeycomb Halloween - Black (Backing), cut:• (2) 22” x WOF strips for the backing. Sub-cut (4) 20” x 22” strips for the backs.

Unit 10make 12

Unit 9

Place Mat Block Assembly1. Sew (1) 1 ¾” x WOF Fabric E strip, (1) 1 ¾” x WOF Fabric D strip, (1) 1 ¾” x WOF Fabric C strip and (1) 2 ½” x WOF Fabric B strip together lengthwise and in that order to make (1) Unit 7 strip set (Fig. 17). Repeat to make (3) Unit 7 strip sets total.

2. Using the template provide, Make sure to pay attention to the strip set direction and cut out (12) Unit 8 pieces from (3) Unit 7 strip sets (Fig. 18).

3. Repeat Steps 1-2 and refer to Figures 19-20 for fabric identification and location to make (12) Unit 10 pieces.


Fig. 22

Fig. 21

Unit 11make 4

Unit 8

Unit 8

Unit 8

Uni

t 10

Unit 10

Unit 10

A

Place Matmake 4

8. Finish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to complete (1) Place Mat top.

9. Repeat Steps 7-8 to make (4) Place Mat tops total.

10. Layer and quilt as desired.

11. Sew the (8) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press. Divide the strip into (4) even lengths.

12. Bind as desired.

4. Sew (3) Unit 8 pieces and (3) Unit 10 pieces together, alternating them, to make (1) Unit 11 block (Fig. 21). Repeat to make (4) Unit 11 blocks total.

5. Following the manufacturer’s instructions, trace (4) Center templates onto the paper side of the fusible web. Roughly cut out each template about 1/8” outside the drawn lines.

6. Position each center template over one motif on Fabric A on the wrong side of the fabric and press in place. Cut out each template on the drawn lines.

7. Refer to Figure 22 to arrange and press (1) Fabric A Center hexi onto (1) Unit 11 block.


100% Template

1” squarefor scale

Place Mat Section Template


Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.henryglassfabrics.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

©2018 Henry Glass & Co., Inc.

100% Template1” squarefor scale

Center TemplateFusible Applique

Trace 4Center over a scene

on Fabric A

Documents

Hocus Pocus · 2019. 5. 28. · Hocus Pocus Finished Wall Hanging Size: 35 x 47 Finished Place Mat Size: 15 x 17 ¾ 49 West 37th Street, New York, NY 10018 tel: 212-686-5194 fax: