Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
COMPANY PROFILE
H.J.Stauble Ltd.
H.J.Stauble Ltd. is a family owned andoperated business, continuing a tradition
of excellence since established in 1959.We are a full service provider of majorfabrication, construction and plantfabrication, construction and plantservices to themanufacturing
Caribbean.
energy, construction andsectors throughout the
Prepared by A.Nagassar2/26/2014
Organization Key Personnel
Sharda Lall (QA/QC Coordinator)
Harold Stauble
(Managing Director)
Adam Murray
(QHS&E Manager)
Mark De Gannes
Jeffery Stauble
( Manager)
Oil Field Division
Brent Stampfli
Gerald Stauble
(General Manager/ Director)
IN-SITU Mach.
Prepared by A. Nagassar
Victor James
Superintendant
Asraf Ali
Shop Supervisor
Anil Nagassar( Project
Manager/Engineer
Mark De Gannes
(Manager) Bolting /
2/26/2014
Brent Stampfli
( Facilities Manager)
Victor James
Superintendant
Desmond Sandy
Petrotrin
Supervisor
SUBSIDIARIESSUPERIOR MACHINE SHOP
A full range of machining shop services In-SITU
machining, oil field drilling tools and specialized
welding and Hard Facing. We also offer 24Hour
services.SUPERIOR RIGGING
A fully certified facility specializing in design A fully certified facility specializing in design engineering, manufacturing & testing of rigging lifting gear.
and
Services Include: Certifying of wire rope slings with afull complement of accessories such as shackles,hooks etc.
Prepared by A. Nagassar2/26/2014
EQUIPMENTITEM DESCRIPTION
Miller 4 Bank 300 ampsMiller 8 Bank 300 ampsDiesel driven 400 amps
Welding Machine ElectricWelding Machine ElectricWelding MachinesCutting SetsBreathing Air CompressorPick Up Truck FlatBed Truck Utility 3 3 no Hiab Truck 10Ton Grove RT 522Clark Crane 714
�
�
�
�
�
�
�
�
�
�
1 Ton4 Ton10 Ton Hiab self loader22 Ton15 TonClark Crane 714
Hydrostatic Test Pump Barge-Ocean going Wheel TractorCentrifugal Pumps 2” – 6”Water blaster Steaming Units Hydraulic Power packAir TuggersAir Compressors
�
�
�
�
�
�
�
�
�
�
15 Ton
32’ x 16” x 5’With Front LiftSelf pumping 1300 gpm15,000 Psi, 15 gsm
2, 4, 5 and 10 Ton185-600 cfm
Prepared by A. Nagassar2/26/2014
SHOP EQUIPMENT
ITEM
LATHES
MILLS
VERTICAL SLOTTER
SHAPERS
RADIAL DRILL PRESS
CYLINDER GRINDER
�
�
�
�
�
CYLINDER GRINDER
POWER SAWS
BOLT THREADERS
ELECTRONIC PROFILE
PLASMA CUTTER
GUILLLOTINE
PLATE ROLLER
�
�
�
�
�
�
�
CUTTER
Prepared by A. Nagassar2/26/2014
SHOP EQUIPMENT continued
METAL WORKERHYDRAULIC PRESSMETAL SPRAYINGCOVERED AREA FORFABRICATION YARD SPACEHYDRAULIC PRESS 155 TONS MACHINE SHOP AREAMARINE LOAD OUT (1,000) METRE
�
�
�
�
�
�
�
50 TON – 300 TON
200’200’
XX60’ = 12,000 sq. ft100’ = 20,000 sq. ft.
200’ X 100’ = 20,000 sq. ft.MACHINE SHOP AREAMARINE LOAD OUT (1,000) METREMETRESFABRICATION FACILITY
�
�
200’TONS
X 100’ = 20,000 sq. ft.OPEN AREA 20,000 SQ.
�
COVERED AREA 2,000 SQ. METRE,
COMPLETE WITH OVER HEAD CRANES.
Prepared by A. Nagassar2/26/2014
RECENT PROJECTS
Petrotrin 4 CDU Plant Shutdown.
PCS Plant Shutdown.
Trinmar to Fabricate and Install Offshore Minimal Launch
Landing For Trinmar. With AIMS Patented Shock Cell
Fabrication of Offshore Oil tanker loading Facilities
Structures and Gangways For South Riding Point Bahamas
�
�
�
�
Structures and Gangways For South Riding Point Bahamas
PPGPL Dock 2 Pile Repair Project.
Petrotrin Light End Mech. Works
Petrotrin 2HTU 2010 Integrity Mech. Works.
Fabrication of Ducting and Other Structures for Carib Glass
BP/NMWG Immortelle Drop Canopy
�
�
�
�
�
Prepared by A. Nagassar2/26/2014
National Gas Company
Prepared by A. Nagassar2/26/2014
National Gas Company
Prepared by A. Nagassar2/26/2014
SRP BAHAMASSTRUCTURES
OFFSHORE OILTANKER
Prepared by A. Nagassar2/26/2014
SRP STRUCTURE
Prepared by A. Nagassar2/26/2014
BP/NMWG IMMORTELLE DROP CANOPY
Prepared by A. Nagassar2/26/2014
BP SERETTE PLATFORM EXTENSION
Prepared by A. Nagassar2/26/2014
JOINT VENTURE PARTNERS
STABIL DRILL :
We have become the Country’s leading supplier of Down Hole Drilling tools. We specialize inoffering TTM (Total Tool Management) to the oil field service industry. This includes thesupply of down hole tools
• Integral blade stabilizers
• Welded blade stabilizers
• Non-magnetic drill collars
• Flex collars
• Mills
• Shock tools
• Subs
• Fishing tools
• SMFI Hydro clean• Flex collars
• Hole openers
• Reamers
All to DS.1 Category 5, and supported by our API Certified machine shop.
Our specially trained machinist are able to repair, as well as manufacture new tools.
Prepared by A. Nagassar2/26/2014
• SMFI Hydro clean
• Pneumatic mud buckets
• Z-Bits
JOINT VENTURE PARTNERS
Stabilizers:
Stabil Drill's complete line of stabilizers includes
spiral blade, straight blade, integral blade,
welded blade, welded full pac, welded full
wrap, sleeve-type, stainless steel non-magnetic
types and its new Trico stabilizer for gumbo
applications. Designed to increase rate of penetration
and to control deviation, Stabil Drill stabilizers are
Prepared by A. Nagassar2/26/2014
and to control deviation, Stabil Drill stabilizers are
economical to use, reducing drilling costs per
foot.
All alloy stabilizers are manufactured from
AISI 4145H modified heat-treated steel for a
wide variety of configurations and hole sizes.
Additionally, Stabil Drill custom manufactures
equipment for a wide range of drilling
applications.
JOINT VENTURE PARTNERS
Stabilizers:
Stabilizers include:
Integral Spiral Blade — Used in hard formations.
360° surface contact. One-piece construction.
Steel and non-magnetic available.
Non-Magnetic — Manufactured from premium
stainless steel used in directional drilling
applications.
Prepared by A. Nagassar2/26/2014
applications.
Sleeve-Type — For remote areas. Interchangeable
with other sleeves and mandrels.
Trico — Specially designed for use in deepwater
applications where gumbo balling is prevalent.
Welded Straight Blade — For drilling soft to medium
hard formations.
Integral Blade
Stabilizers
Integral
Rotary Steerable Integral Three Blade
Straight “Trico”
Integral
Motor Steerable
Prepared by A. Nagassar2/26/2014
Hole Openers
Stabil Drill hole openers are designed for the
enlargement of pilot holes and large hole
applications. They are also used for road and
river crossing applications.
The hole openers are manufactured from AISI
4145H fully heat-treated alloy steel. All are
available with carbide-milled teeth and insert
cutters. Arms and cutters are hard faced for
protection in three different designs for varying
conditions and rock formations. The design of
the hole opener allows for field-changing the
Prepared by A. Nagassar2/26/2014
the hole opener allows for field-changing the
cutters.
Stabil Drill’s range of hole opener types include:
Integral Body Sealed Bearing Hole Opener — One
piece construction offers either solid or circulating
bull noses. Collector Box Style — For soft, medium or
hard formations.
Devil Drill™ — Excellent for soft and hard formations.
Drag Bits — For spudding holes or making wiper
Integral Blade
Stabilizers
Motor Sleeves
As a world leader in the rental and
manufacturing of stabilization
products, Stabil Drill is able to
manufacture any type of integral or
welded blade sleeve stabilizer.
These tools are currently used
by all of the major directional
companies around the world on
Prepared by A. Nagassar2/26/2014
companies around the world on
their mud motors, rotary steerable
tools and also a wide array of
MWD/LWD products.
JOINT VENTURE PARTNERS Continued
Prepared by A. Nagassar2/26/2014
The Leading Rental Provider of High
Specification Down hole Tubular and Accessories
Workstrings International® provides the highest quality down hole rental tubular
and associated accessories, value-added engineering services and operational
support while maintaining the industry’s highest health, safety and environmental
standards.
Landing String (5" - 7 5/8")
• 6 5/8" FASTR ® 2.0 - 2.5 MM lbs Landing String
Drill Pipe (2 7/8" - 6 5/8")
• All NC (API) Connections
• Specialty Connections (HT, XT, uXT, TT® , XTM, CTM,
GTM and TTM® )
Range 3 Tubulars
• 6 5/8" FASTR ® UD-165 slip proof landing string
• 6 5/8" FH 0.625" (40#) V-150 landing string
• 6 5/8" FH 0.522" (34#) V-150 drill pipe
• 6 5/8" FH 0.362" (27.7#) V-150 drill pipe
• 5 7/8" CTM57 0.625" completion pipe
• 5 7/8" CTM57 0.415" completion pipe
Handling Tools & Accessories
Prepared by A. Nagassar2/26/2014
Handling Tools & Accessories
• FASTR ® Slip System
Slips, Master Bushings, Bowls, Backsaver®
• Heavy Weight Drill Pipe (3 1/2" - 6 5/8")
Slick, Spiral and Tri-Spiral
• Drill Collars (3 1/8" - 9 1/2") Spiral or Slick
• Landing String and Drill Pipe Pup Joints
• Elevators (2 3/8" - 7 5/8")
Hydraulic and Manual
• Lower Kelly Valves, IBOPs, Safety Valves
On-Site Valve Repair Facility
• Subsea Riser/B.O.P./Wellhead Washtool
• Certified Cargo Baskets
• Crossover Subs, Pump-In Subs, Drill Collar Lift Subs
• Bit Subs
FASTR ® Landing String System
The FASTR ® Landing String System consists of 6 5/8" FH Slip-Proof® Landing String design that
features a 6ft Slip- Proof® section which prevents the crushing of the tubular by the FASTR ® slip
system. The V-150 grade FASTR ® landing string is rated to 2.0 MM lbs., with the UD-165 grade
rated to 2.5 MM lbs.
FASTR ® 1000 Ton Slips
Optimum angle and length
for better load distribution
The FASTR ® Slip System is used for
handling loads of up to 1000 Ton
encountered when landing long
strings of casing in deep water
operations. The FASTR ® Landing
String System provides safe and
reliable operation using standard rig
equipment.
Prepared by A. Nagassar2/26/2014
Split/Solid Insert
Bowl
Uniquely designed to
accommodate the
FASTR ® slips
FASTR ® Landing String
• Tensile and slip crushing capacity for 2.0
MM lbs and 2.5 MM lbs
• Standard 6 5/8" FH connections for easy
make-up and handling
Backsaver®
Hydraulically operated
Hydraulic 1000 Ton Elevator
Dressed with special designed
inserts for handling the 6 5/8"
Slip-Proof® Landing String
JOINT VENTURE PARTNERS Continued
INTEGRAH.J. Stauble is the exclusive representative for INTEGRA which offers
specialized equipment together with fully trainedcarry out a wide range of services.
technical staff to
Bolt Tensioning (Top side & Sub Sea)Bolt Torque (Top side & Sub Sea)
�
�
On-site machining (Top side & Sub Sea)�
�
�
�
�
�
�
On-site machining (Top sideHydro testing Ultrasonic
Verification Flange
Tracking Pneumatic Stud
Removal Nut splitting
Flange alignment
Sub Sea Tooling
& Sub Sea)
Prepared by A. Nagassar2/26/2014
BTC DIAMOND WIRE
UNDERSEA CUTTING
The BTC Diamond Wire Undersea Cutting system which is jointly provided by
INTEGRA Technologies/Cutting Edge Services has proven ideal for the
challenging world of Offshore Platform Decommissioning, and related subsea
work.
SAFE and FAST
The Diamond Wire Saw is a remotely controlled system that is highly
efficient, hydraulically driven, and uses diamond wire for cutting structures
above or below water. This saw is capable of cutting any type of material in a
Prepared by A. Nagassar2/26/2014
above or below water. This saw is capable of cutting any type of material in a
single operation.
Topside Power Unit or ROV Pilot
Installed and monitored by Divers or
by an ROV, the Wire Speed, Cutting Rate
and Clamp Pressure are all controlled from
the surface using a Topside Power Unit or
ROV Pilot.
BTC DIAMOND WIRE
UNDERSEA CUTTING
Offshore Applications
• Multiple String Conductors
• Pipeline Re-Routes
• I-Beam & X-Braces
• Platform Legs
• Drive Pipes
Controlled
By Topside Power Unit or ROV Pilot
Prepared by A. Nagassar2/26/2014
By Topside Power Unit or ROV Pilot
ROV Saw Assembly
With Clamp attached to Structure
ROV Friendly
Changing Wire in Subsea Environment
Self-Clamping
No need for Chains or Come-Alongs
SUBSEA BOLT TENSIONERSSince the early 1980’s INTEGRA has been the leading provider of subsea
tensioning equipment in the Gulf of Mexico. The Offshore Subsea environment
demands tools that will be reliable, safe and easy to operate, and the INTEGRA
SEAStallion™ has been designed to meet these needs
FEATURES
SCALLOPED SPLIT REACTION NUT
The unique SEAStallion™ Split Reaction Nut is scalloped for better grip and confident
handling – ideal for damaged nuts.
EXTENDED PISTON STROKE
30mm Piston Stroke on the SS2 through the SS7 allows for tensioning on numerous flanges
without retracting the ram.
PISTON OVER-STROKE PREVENTION
Prepared by A. Nagassar2/26/2014
PISTON OVER-STROKE PREVENTION
A Stroke Indicator on the ram allows for use of Maximum Stroke without over-stroking the
ram or loosing oil pressure.
COMPACT DESIGN AND TOOL RANGE
Not only is the SEAStallion™ small and light, you only need 7 tools to cover a full range of
flange sizes.
SIMPLE HOSE CONNETIONS
Duel Ports eliminate the need for a tee block.
HIGHER BOLT LOADS ARE NOW POSSIBLE
Maximum Operating Pressure of 21,750-psi
CORRISION RESISTANCE
Stainless Steel components
ULTRASONIC VERIFICATIONThe only way to be absolutely sure that the specified
bolt load is achieved in a bolted assembly is to
measure
the bolt stretch. The only practical way to do that is
with precision bolt load monitoring.
Every other method is guesswork and guesswork can
be dangerous, costly and could lead to unscheduled
shutdowns. Ultrasonic verification instantly provides
digitized read-out of the true bolt load.
One critical flanges, control of the bolt preload is
Prepared by A. Nagassar2/26/2014
One critical flanges, control of the bolt preload is
essential to the performance of the flange. Bolt load
that is
too low will not ensure suitable gasket stress is
maintained to affect a seal. The result is leakage.
A bolt load that is too high will result in damage to
the flange, bolt or gasket, resulting in leakage.
JOINT VENTURE PARTNERS Continued
AIMS International has also emerged as the offshore oil & gas industry leader in
engineering design, fabrication and installation of fiberglass structural systems.
Designing and constructing corrosion-resistant, lightweight and maintenance-free Designing and constructing corrosion-resistant, lightweight and maintenance-free
structures is key to meeting the needs of the deep water offshore industry.
Platforms, stairs, ladders, handrails and other structures that are conventionally built
in steel can be constructed by AIMS in FIBERGLASS. AIMS is a financially strong,
privately owned company, and is considered an engineering leader in the field of
structural fiberglass.
For over 25 years, AIMS has also lead the industry in offshore platform rendering
systems. Our energy cells, rub strips, and other barge bumper products are the most
requested by engineers writing specifications for offshore platforms.
Prepared by A. Nagassar2/26/2014
JOINT VENTURE PARTNERS Continued
AIMS“Advanced Industrial & Marine Service Inc. Has become the county’s
leading supplier, engineering and fabricators of fiberglass
grating and structural systems for the oil and gas industry.to be noted that all offshore platforms installed for the last
years carry our Fiberglass Systems.
It8is
Fiber
Fiber
Fiber
Fiber
Fiber
Fiber
Glass
Glass
Glass
Glass
Glass
Glass
Wind-walls.
Gratings Systems.
Mud Mats.
Structures Ladders, Handrails and Stair-treads.
Pipe Penetration Collars.
Electrical Support Systems. (Cable Trays, Instrument
�
�
�
�
�
�
Stands, Channels etc.)
Prepared by A. Nagassar2/26/2014
H.J. Stauble / AIMS /Trinmar
Prepared by A. Nagassar2/26/2014
2/26/2014 Prepared by A. Nagassar
2/26/2014 Prepared by A. Nagassar
2/26/2014 Prepared by A. Nagassar
JOINT VENTURE PARTNERS Continued
Thompson
Complete Range of Industrial Cleaning ServicesUnplanned emergencies and extended outages to clean plant equipment can dramatically impact operations, maintenance support activities and costs. Thompson Industrial Services has a stellar 26-year reputation of providing dependable, safe and a stellar 26-year reputation of providing dependable, safe and creative outcomes from planning through execution to minimize downtime and ensure seamless performance.
Prepared by A. Nagassar2/26/2014
JOINT VENTURE PARTNERS Continued
Thompson
Complete Range of Industrial Cleaning Services
Water Blasting
Applications of 10,000-20,000 PSI
Pipelines and Process EquipmentPipelines and Process Equipment
Tanks, Vessels & RR Cars
Non-entry Cleaning
Customized Applications
Ultra-High Pressure Water Blasting & Cutting
Industrial Deposit Removal
Surface Preparation
Cutting Applications
Prepared by A. Nagassar2/26/2014
JOINT VENTURE PARTNERS Continued
ThompsonComplete Range of Industrial Cleaning Services
Chemical Cleaning
Boilers to Piping
Polymer to Water Scale Deposits
Foam, Gaseous, Vapour & Liquid MediumsFoam, Gaseous, Vapour & Liquid Mediums
Cryogenic (Dry Ice) Cleaning
Chemical- and Waste-Free
Safe for Operating Machinery
FDA & Ultra-Clean Applications
Non-abrasive, Non-corrosive & Non-conductive
Prepared by A. Nagassar2/26/2014
JOINT VENTURE PARTNERS Continued
Oilfield chemicals
Prepared by A. Nagassar
Oilfield chemicals
This range of Radiagreen® products covers almost every segment of the oil & gas
industry, from seismic exploration over drilling and completion to the production
and transport of oil and gas.
All Radiagreen® products are derived from natural and renewable resources. They
are non-toxic, rapidly biodegradable and present absolutely no danger to marine
life nor to the operator.
2/26/2014
SERVICESGeneral Plant MaintenanceMachine Shop WorkChain Block RepairsSteel Structures Fabrication and ErectionMarine InstallationTank Fabrication and ErectionGeneral WeldingPump RepairsPipe Line Construction GeneralSteel Fabrication MechanicalEquipment InstallationUnderwater Welding and Repairs
�
�
�
�
�
�
�
�
�
�
�
� Underwater Welding and Repairs Fiberglass Grating & Structures Bolt Tensioning/TorqueVessel CleaningTransportation
�
�
�
�
�
NEW SERVICES:•SHOT PEENING
•COLD ROLLING
•PHOSPHATING
Prepared by A. Nagassar2/26/2014
• Float Valves
• Sleeves Stabilizer ( For Mud motors and Power drive)
• Heavy Duty Thread Protectors
PRODUCTS
Prepared by A. Nagassar2/26/2014
• Heavy Duty Thread Protectors
• Drilling Chemicals
• P550 Material Stocked for X-Over Manufacture
CLIENTSBP Trinidad and Tobago LLC
EOG Resources Trinidad Limited
BHP Petroleum Trinidad Ltd
British Gas Trinidad Ltd
Petrotrin (All Areas)
Trinmar Limited
Atlantic LNGNeal & Massy Wood GroupArcadian Lange
Ballast Ready Mix
Trinidad
Bechtel International Inc.Carib Glass Works
Kellogg Pan American Corp.
Caribbean Methanol CoNational Gas Co. of T& T
Methanix
NuIron
Trinidad Contractors Ltd
Cliffs and Associates
Proman GmbHElectrical Industries LimitedTrinidad
National Flour Mills
Phoenix Park Gas Company
Analysts Overseas S.A.
H.B. ZachryPan American Standard Brands
Caribbean Ispat
Trinidad Distillers Limited
Caribbean Development Company
Nucor Iron Carbide
Electrical Industries LimitedGlobal Marine Venture
Production Schlumberger
Trinidad Inc. Power
Generation Company Yara
Trinidad Ltd.AUM - IPSL
Ansa McAL Chemcials
Nitrogen 2000
Prepared by A. Nagassar2/26/2014
Project Name-Fabrication
Work Client Description of Work
Fabrication and Installation work on the Burner
Boom on the Onyx Rig Diamond Offshore Welding and Fabrication of Burner Boom
Fabrication and repair work to Elevator Shaft on
Ocean Lexington Rig Diamond Offshore Welding and Fabrication of Elevator Shaft
Fabricate , Remove and Install Offshore Minimal
Launch Landing. Trinmar
Welding and Fabrication of Platforms, ladders
and Piping.
#4 VDU PH-2 OSPP:RPR TAPROGEE FILTER
PW. Petrotrin
Removal of bundles, old piping and support
structures and Fabrication and Installation of
bundles, structures and piping in Refinery
Fabrication and commission of New 6000 gal
Prepared by A. Nagassar2/26/2014
Fabrication and commission of New 6000 gal
diesel tank at Caridoc for Pilots Pilots Association Fabrication of tank and piping.
Fabrication of King Post Flare Boom Rest and
Supports for Port and Starboard Side of Ocean
Lexington Rig BG/ Diamond Offshore
Shop Fabrication of King Post Supports and
Platform and boom rest
Supply of Labour and Equipment for Fabrication
of Boat Landing for Banyan Platform-EOG EOG
Welding and Fabrication, sandblasting and
painting of Boat Landing Structure.
Supply of Labour and Equipment for works on
Dutch Vessel MV Fjell Fairstar
Welding and Fabrication of Piping and hull
repairs and welding of sea fasteners.
Supply of Labour and Equipment for Petro
Saudi- Discoverer Rig Procurement Services Delaware
Welding and Fabrication of Hydraulic Piping and
Structural repairs to Derrick
Fabrication of Dropped Canopy for BP
Immortelle Platform NMWG
Fabrication and sandblasting and painting of
Dropped Canopy for BP Immortelle Platform
Project Name-Fabrication
Work Client Description of Work
Dock 1 and 2 Repairs to Nav Lights, dolphin
platforms and SS Ladders and Handrails. PPGPL
Fabrication of new SS Ladders and handrails,
Removal of old structures and installation and
sandblasting, water blasting of platforms and
structures.
Fabrication of Emergency Stairway for BP
Amherstia Platform NMWG
Fabrication of Platform, stairs and handrails,
sandblasting and painting of platforms and
structures.
Fabricate and Install Offshore Minimal Launch
Landing. Trinmar
Welding and Fabrication of Platforms, ladders
and Piping.
British Gas, BPTT, Offshore Gas Platform
Structural Fabrication BP,BG, BPTT
Welding and Fabrication of Platforms, ladders
and Piping.
Prepared by A. Nagassar2/26/2014
Fabrication Of Subsea Piping and installation
Aides Stolt Offshore
Welding and Fabrication of Piping and Steel
structures
Fabrication of Beam Grillage BP/TOFCO Welding and Fabrication
Fabrication of Conduction Clamps and conductor
guides BP/TOFCO Welding and Fabrication
Fabrication of Unstressed Grout Clamp TOFCO/BP Welding and Fabrication
Fabrication of Grillage Tecnip Welding and Fabrication
Project Name-Supply Of FRP
Materials Client Description of Work
Supply Wind wall and FRP Panels for NGC Poui
Platform NGC Supply FRP Wind walls for Poui Platform
Supply and installation of FRP Handrails and
Ladders for BP Mango and Cashima BP Fabrication- supply of materials
Project Name-Supply Of FRP
Materials Client Description of Work
Changing out bolts and Gaskets for NGC Caroni
Plant NGC Bolt Torquing
PCS Nitrogen Plant Shutdown PCS Nitrogen Bolt Torquing
BGTT Dolphin Shutdown BGTT Bolt Torquing
Prepared by A. Nagassar2/26/2014
BGTT Hibiscus Shutdown BGTT Bolt Torquing
BPTT Canonball Vent deviation Project BPTT Bolt Torquing
Tensioning and Hydro testing work on Toucan
Platform EOG Bolt Torquing/ Tensioning and Hydro testing
Atlantic LNG Shutdown Atlantic Bolt Torquing/ Tensioning and Hydro testing
Project Name-Pressure
Washing Client Description of Work
PCS Nitrogen Plant Shutdown PCS Nitrogen Pressure Washing
CNC Exchanger Cleaning CNC Pressure Washing
HEALTH, SAFETY AND
ENVIRONMENT POLICY STATEMENT
HEALTH, SAFETY AND
ENVIRONMENT POLICY STATEMENT
As an organization determined to remain a leader in our industry, we are
committed to comply with this policy.
H.J. Stauble Limited strives to attain a zero-accident lifestyle and
encourage one that upholds safe and healthy work practices as a core
organizational value. We shall therefore:
•Aim to achieve the highest standards of occupational health and safety for all
employees, visitors and the public by:
Prepared by A. Nagassar2/26/2014
employees, visitors and the public by:
•Ensuring a safe working environment inclusive of safe working
equipment through the implementation of hazard identification and risk
management based HSE best practices.
•Encouraging all our employees to become actively involved and share
responsibilities to continuously improve our health and safety
performance.
•Complying with all applicable Occupational Health, Safety and
Environmental laws, regulations and client requirements.
H. J. Stauble has been STOW Certified since November 2011
HEALTH, SAFETY ANDENVIRONMENT-STOW
CERTIFICATE
HEALTH, SAFETY ANDENVIRONMENT-STOW
CERTIFICATE
Prepared by A. Nagassar2/26/2014
QUALITY
The Company is presently implementing a Quality Management System in accordance with ISO 9001:2008 requirements.
Our aim is to meet and exceed customer expectations. The Management of H. J. Stauble Limited incorporates the 8 Quality Management Principles into their business the 8 Quality Management Principles into their business to guarantee effective decision making and
management. The Quality Management System beingdeveloped is integrated into all aspects of our operationto ensure work is performed at the highest standardsand ensure continual improvement to the effectivenessof our operations.
Prepared by A. Nagassar2/26/2014
8/17/2010 Prepared by N.Kennedy 24