Hitch & Dra wbar P arts · ford / new holland cnh fia t case-ih long leyland landini kubo ta mccormick o ther john deere jcb renaul t same versa tile ... hitch & dra wbar p arts

126

*** Truck icon indicates the item is shipped via truck freight .***

MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-957E703A PTO Oil Seal 0.21 Lbs.Replaces: 195763M1, 1190

Dim/Info: 1 5/8" X 2 1/2" X 7/8"

For Models: DEXTA, SUPER DEXTA

A-D3NNN883A Pump Idler Gear 5.12 Lbs.Dim/Info: 55 Teeth

For Models: (6600, 6610 ALL W/ 8SP TRANS)

A-D6NNN750A Gear, Hydraulic Pump & PTO Drive 9.66 Lbs.Replaces: C7NNN750A

Dim/Info: 53 / 52 Teeth 25 Spline 3.230" Wide

For Models: 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700

A-D1NN473A Backup Ring, Hydraulic Lift Cylinder Piston 0.03 Lbs.Dim/Info: sold in multiples of 2

For Models: (4100, 4140, 4200, 4330, 4340, 4400, 4410, 4500 ALL 1/65-12/74), 5200 1/67-12/74, (7000, 7200 ALL 10/71-12/74)

A-E0NNN750AA Hub, PTO Drive Clutch 2.88 Lbs. For models w/ 8 or 10 plate ind. PTO clutch.

Replaces: D2NNN750A Dim/Info: 25 / 52 Teeth

For Models: 5700, 5900, 6410, 6810, 7410, 7810, 7910, 8210, (5000, 7000 ALL 1965> Single/ Two Speed), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 ALL Single/ Two Speed)

A-C5NN702A PTO Countershaft 4 Lbs.Dim/Info: 6 / 23 Spline 12.0625" Long

For Models: (2000, 2100, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4110, 4330, 4340 ALL W/ TRANSMISSION PTO)

A-9N502 Gasket, Hydraulic Lift Housing 0.02 Lbs.Dim/Info: sold in multiples of 2

For Models: 2N, 8N, 9N

A-NCA502A Gasket, Hydraulic Lift Housing Cover 0.02 Lbs.Dim/Info: sold in multiples of 5

For Models: 600, 700, 800, 900

A-NAA502A Gasket, Hydraulic Lift Housing Cover 0.02 Lbs.Dim/Info: sold in multiples of 5

For Models: NAA(JUBILEE)

A-3B6523 Hydraulic Lift Cover Repair Kit 0.7 Lbs. Kit contains (1) A-C0NNB999A seal, (1) A-NCA473A washer, (1) A-E7NN502AA gasket (1) A-87111S95 piston O-ring & (18) O-rings.

A-3B900 O'Ring & Washer Kit 0.04 Lbs.For Models: (2000, 3000 ALL 1965>)

A-3B5354 Hydraulic Lift Cover Repair Kit 0.18 Lbs. Kit contains (2) A-NAA552A gaskets, (1) A-NAA553B gasket, (1) A-NAA473A backup washer, (1) A-NAA502A gasket, (1) A-NAA533A piston O-ring, (1) A-44R011 O-ring, (1) A-44R112 O-ring, (1) A-44R113 O-ring, (1) A-44R114 O-ring.

For Models: NAA(JUBILEE) 1953-1954

A-3B909 Hydraulic Lift Cover Repair Kit 0.25 Lbs. Kit contains (2) A-9N613 valve chamber gaskets, (1) A-9N611 base pump gasket, (2) A-9N4131 inspection cover gaskets & (1) A-C5NN747A PTO gasket.


A-3B928 Hydraulic Lift Cover Repair Kit 0.3 Lbs. Kit contains (2) A-9N613 valve chamber gasket (1) A-9N553 gasket (1) A-NAA533A piston O-ring (1) A-NAA473A back up washer (1) A-9N502 lift cover gasket (2) A-9N4131 inspection cover gasket (1) A-C5NN747APTO gasket (1) A-9N611 gasket & (2) A-9N552 gaskets


A-3B5564 Hydraulic Lift Cover Repair Kit 0.25 Lbs. Kit contains (1)C0NNB999A seal, (1)NCA473A washer, (1)9N532 gasket, (1)NCA502A gasket & (20) O-rings.

A-3B900 O'Ring & Washer Kit 0.04 Lbs.For Models: (2000, 4000, 600, 800, 900 ALL 1955-64)

A-CKPN485A * Seal Kit & O-Ring, Hyd Lift Cover, Cyl & Pump 0.2 Lbs. Kit contains: (1) A-86484S9 (1) A-87036ES (6) A-87006S9 (1)A-87037S94 (5) A-87010S9 (1) A-87038S94 (1) A-87012ES (1) A-87044S94 (1) A-87016ES (2) A-C5NNN917A (9) A-87033S94 (3) A-C5NNN991B (10) A-87034ES (1) A-C7NNG997A (3) A-87035ESB (1) A-D2NNB997A .

For Models: (2000, 3000, 4000, 5000, 7000 ALL 1965-75)

Hitch & Drawbar Parts

127


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-9N552 Gasket, Hydraulic Cylinder to Center Housing 0.01 Lbs. Two used w/ A-9N510D hydraulic lift cylinder.

Dim/Info: sold in multiples of 5


A-C7NN488J Control Valve & Sleeve, Hydraulic Lift Cylinder 0.75 Lbs. Blue Color Code

For Models: 2000, 3000, 4000, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700

A-C5NNN858C Valve, Selector (BLU) .6238/.6241 0.35 Lbs.

For Models: 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6600C, 6600O, 6610, 6610O, 6610S, 6640, 6640O, 6700, 6710, 6810, 6810S, 7000, 7100, 7200, 7410, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7740, 7740O, 7810, 7810O, 7840, 7840O, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, TB100, TB110, TB120, TS100, TS115, TS90, TV140, TV145, TW15, TW25, TW35, TW5

A-C5NNN858B Valve, Selector (WHT) .6235/.6238 0.35 Lbs.

For Models: 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6600C, 6600O, 6610, 6610O, 6610S, 6640, 6640O, 6700, 6710, 6810, 6810S, 7000, 7100, 7200, 7410, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7740, 7740O, 7810, 7810O, 7840, 7840O, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, TB100, TB110, TB120, TS100, TS115, TS90, TV140, TV145, TW15, TW25, TW35, TW5

A-D1NNN846B Valve, By-Pass (WHT) .6672/.6674 0.2 Lbs.

For Models: 5000, 5100, 5200, 5340, 7000, 7100, 7200

A-D1NNN846E Valve, By-Pass (GRN) .6678/.6680 0.2 Lbs.

For Models: 5000, 5100, 5200, 5340, 7000, 7100, 7200

A-D1NNN846D Valve, By-Pass (YLW) .6676/.6678 0.2 Lbs.

For Models: 5000, 5100, 5200, 5340, 7000, 7100, 7200

A-D1NNN846C Valve, By-Pass (BLU) .6674/.6676 0.2 Lbs.

For Models: 5000, 5100, 5200, 5340, 7000, 7100, 7200

A-3B510 Gasket, Quadrant to Lift Cover 0.01 Lbs.Dim/Info: sold in multiples of 5

For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2111, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 601, 611, 620, 621, 630, 640, 641, 650, 651, 660, 661, 671, 681, 701, 740, 741, 771, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, DEXTA, NAB, SUPER DEXTA

A-8N486B Pin, Hydraulic Lift Yoke 0.72 Lbs.

For Models: 8N, 900 EXCEPT ROW CROP 1/53>, 800 EXCEPT ROW CROP 1/55>, (2000, 4000 ALL 4 CYL. HI-CLEARANCE 1/53>)

A-NCA535A Rocker, Hydraulic Lift 2.9 Lbs.

For Models: 2N, 8N, 9N, 900, 800 HI-CLEARANCE, (2000, 4000 ALL 4 CYL. HI-CLEARANCE)

A-C7NN535B Rocker, Hydraulic Lift 4.3 Lbs.

For Models: 2600 1/75>, 2000 3 CYL. 1/65>

A-E0NN535AA Rocker, Hydraulic Lift 4.4 Lbs.

For Models: 3000 1/65>, (2600, 3600, 3600N ALL 1/75>), (3610, 3610N ALL 1/81-12/82), 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-E2NN535BA Rocker, Hydraulic Lift 12.34 Lbs.

For Models: (2810, 2910 ALL 1/81>), 3000 1/65>, 3600 1/75>, 3610 1/81-12/82, (3910, 3910N ALL 1/81>), 3910V 82/84, 4000 3 CYL. 1/65>, 4100 1/75>, (4110, 4110N ALL 1/81>), 4110V 82/84, (4610, 4610N ALL 1/81>), 4610SU, 4610V 82/84

A-E0NN535CA Rocker, Hydraulic Lift 13.5 Lbs.

For Models: 5000 1/69>

A-E0NN535DA Rocker, Hydraulic Lift 12 Lbs.


A-C0NNC893A Pin, Lift Link, Lower 0.31 Lbs.

For Models: 5000 1/65>, 4000 3 CYL. 1/65>

A-C5NNK840B Pin, Hydraulic Lift Rocker 0.5 Lbs.

For Models: 3000 1/65>, (2600, 3600 ALL 1/75>), 2610 1/81-4/83, 2000 3 CYL. 1/65>


128


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-C5NNK840A Pin, Hydraulic Lift Rocker 0.52 Lbs.

For Models: 4610 1/81>, 4000 3 CYL. 1/65>

A-E1NNB681AA Bushing, Hydraulic Lift Rocker 0.36 Lbs.

For Models: 2000, 231, 233, 2600, 3120, 3300, 333, 335, 3400, 3500, 3600, 3600N, 3600V, 4110, 4600SU, 531

A-D8NN486AB Pin, Hydraulic Lift Rocker 1.4 Lbs.


A-D8NN486BB Pin, Hydraulic Lift Rocker 0.95 Lbs.


A-C5NNN939A Pin, Lower Lift Fork (3") 0.8 Lbs.

For Models: 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700

A-9N532 Gasket, Quadrant to Lift Cover 0.01 Lbs.Dim/Info: sold in multiples of 5

For Models: NAA(JUBILEE), 2N, 600, 700, 8N, 800, 9N, 900

A-8N545B Hydraulic Lift Ram Arm 4.6 Lbs.


A-NAA545A Hydraulic Lift Arm 5.05 Lbs.

For Models: NAA(JUBILEE), NAB

A-NCA545B Hydraulic Lift Ram Arm 5.58 Lbs.

For Models: 600, 700, 800, 900, (2000, 4000 ALL W/ 4 CYL. ENGINE <1964)

A-9N510D Hydraulic Lift Cylinder 11.78 Lbs.


A-NAA530B Piston, Hydraulic Lift 1.1 Lbs. Uses: 235760KIT Seal Kit

For Models: NAA(JUBILEE), NAB, 2N, 8N, 9N

A-C7NN526D Rod, Piston Connecting L/Hole 3 Lbs.

For Models: 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600C, 6610, 6610O, 6610S, 6640, 6640O, 6700, 6710, 6810, 6810S, 7000, 7010, 7200, 7410, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7740, 7740O, 7810, 7810O, 7810S, 7840, 7840O, 7910, 8010, 8210, 8240, 8340, TB100, TB110, TB120, TS100, TS110, TS115, TS90, TV140, TV145

A-235760KIT O-Ring Kit 0.4 Lbs. Used w/ NAA530B piston.

Dim/Info: 2.5" Dia. Piston (1) NAA473A Back Up Ring and (1) 235760 O-Ring

For Models: 2N, 8N, 9N, NAA(JUBILEE), NAB

A-235760 O-Ring, Hydraulic Lift Piston 0.02 Lbs.Replaces: NAA533A


For Models: NAA(JUBILEE), NAB, 2N, 8N, 9N

A-86534029 Bushing, Hydraulic Lift Shaft 1.1 Lbs.Replaces: 9N531C

For Models: DEXTA, NAA(JUBILEE), NAB, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900

A-NCA544B Shaft, Hydraulic Lift 14.8 Lbs.

For Models: 2N, 600, 700, 8N, 800, 9N, 900, (2000, 4000 ALL 4 CYL. <1964)

A-C5NN544B Shaft, Hydraulic Lift 30.66 Lbs.

For Models: 5000, 5100, 5110, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, (6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210 ALL <5/85)

A-C5NN544D Shaft, Hydraulic Lift 14 Lbs.

For Models: 2000 1965>, 2100, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340A <5/1983, 3500, 3600, 3910, 4000 1965>, 4110, 530A, 531

A-9N543B Hydraulic Lift Shaft Arm 5.68 Lbs.

For Models: (600, 700, 800, 900 ALL RH ARM), (NAA(JUBILEE), 2N, 8N, 9N ALL RH/LH ARM), (2000, 4000 ALL 4 CYL. <1964 RH ARM)

A-86563314 Hydraulic Lift Piston Connecting Rod 1.1 Lbs.Replaces: 957E526, NCA526A

For Models: DEXTA, NAA(JUBILEE), 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900


129


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-9N553 Gasket, Hydraulic Lift Cylinder Mounting 0.01 Lbs. Used w/ 9N510D hydraulic lift cylinder.



A-C5NN518B Gasket, Hydraulic Lift Cover Gasket 0.02 Lbs.Dim/Info: sold in multiples of 5

For Models: NAA(JUBILEE), 2N, 600, 700, 8N, 800, 9N, 900

A-NAA553B Gasket, Hydraulic Lift Cylinder Housing 0.04 Lbs.Dim/Info: sold in multiples of 5


A-NAA552A Gasket, Hydraulic Cylinder to Center Housing 0.04 Lbs.Dim/Info: sold in multiples of 10


A-C5NN533A O-Ring, Hydraulic Lift Cylinder Piston 0.01 Lbs.Dim/Info: sold in multiples of 4

For Models: 4000 1965-75

A-87120S95 O-Ring, Hydraulic Lift Cylinder Piston 0.02 Lbs. For models w/ 4.12" dia. piston.

For Models: (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81), (5610, 6610, 6710, 7610, 7710 ALL 1981>)

A-373408S O-Ring, Hydraulic Lift Cylinder Piston 0.02 Lbs. Used on models w/ 3.75" dia. piston.

For Models: (5000, 7000 ALL 1965-75 W/ 3.75" DIAMETER PISTON), (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81 W/ 3.75" DIAMETER PISTON)

A-87111S95 O-Ring, Hydraulic Lift Cylinder Piston 0.02 Lbs.

For Models: (2000, 3000 ALL 1965-75), (2600, 3600 ALL 1975-81), (2610, 3610 ALL 1981>)

A-D1NN473B Backup Ring, Hydraulic Lift Cylinder Piston 0.02 Lbs. For models w/ 3.75" dia. piston.

For Models: (5000, 7000 ALL 1965-75), (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81)

A-D3NN473A Backup Ring, Hydraulic Lift Cylinder Piston 0.03 Lbs. For models w/ 4.12" dia. piston.

For Models: (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81), (5610, 6610, 6710, 7610, 7710 ALL 1981>)

A-NCA473A Backup Ring, Hydraulic Lift Cylinder Piston 0.02 Lbs.

For Models: (2000, 3000 ALL 1965-75), (2600, 3600 ALL 1975-81), (2610, 3610 ALL 1981>)

A-D3NNB485A Backup Ring, Hydraulic Lift Cylinder Piston 0.02 Lbs.

For Models: (4100, 4600 ALL 1975-81), (4110, 4610 ALL 1981>)

A-9N675 Ring Set, Hydraulic Lift Cylinder Piston 0.08 Lbs. Set of 3 - used w/ 9N530B piston.


A-TLH01 Hydraulic Top Link Cylinder, Cat I (2" Bore) 12.3 Lbs. All ports .563"-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-650 Dim/Info: Stroke Length : 8" Closed Length : 20" Barrell Length : 12.438" Rod End Ball I.D. : .750" Rod End Ball Width 1.750" Base End Ball I.D. : .750" Base End Ball Width : 1.375" Base to Ball Ctr Length : 3.500"

A-TLH02RK Seal Kit 0.05 Lbs.For Models: FITS SEVERAL MODELS Check Dimensions For Your Application

A-TLH02 Hydraulic Top Link Cylinder, Cat I (2" Bore) 9.5 Lbs. All ports .563"-18 ORB w/ two adapters .563" -18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-762 Dim/Info: Stroke Length : 5" Closed Length : 15" Barrell Length : 9" Rod End Ball I.D. : .750" Rod End Ball Width 1.750" Base End Ball I.D. : .750" Base End Width : 1.563" Base to Ball Ctr Length : 3.813"



130


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-TLH03 Hydraulic Top Link Cylinder, Cat I Rod/Cat II Base (3" Bore) 16.72 Lbs. All ports .563"-18 ORB w/ two adapters .563" -18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-544 Dim/Info: Stroke Length : 8" Closed Length : 20" Barrell Length : 12.438" Rod End Ball I.D. : .750" Rod End Ball Width 1.750" Base End Ball I.D. : 1" Base End Ball Width : 1.750" Base to Ball Ctr Length : 3.500"


A-TLH04 Hydraulic Top Link Cylinder, Cat I Rod/Cat II Base (3" Bore) 17.9 Lbs. All ports .563"-18 ORB w/ two adapters .563" -18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-507 Dim/Info: Stroke Length : 8" Closed Length : 22" Barrell Length : 12.438" Rod End Ball I.D. : .750" Rod End Ball Width 1.750" Base End Ball I.D. : 1" Base End Ball Width : 1.750" Base to Ball Ctr Length : 5.500"


A-TLH05 Hydraulic Top Link Cylinder, Cat II (3" Bore) 21.46 Lbs. All ports .563"-18 orb w/ two adapters .563"-18 ORBM X .250 NPTM 90° swivel.

Replaces: Gannon 13-827 Dim/Info: Stroke Length : 8" Closed Length : 26" Barrell Length : 12.438" Rod End Ball I.D. : 1" Rod End Ball Width 1.750" Base to Ball Ctr Length : 5.500"

For Models: FITS SEVERAL MODELS Check Dimensions For Your Application

A-TLH06 Hydraulic Top Link Cylinder, Cat I (2" Bore) 13.9 Lbs. All ports .563"-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-535 Dim/Info: Stroke Length : 8" Closed Length : 24.063" Barrell Length : 12.438" Rod End Ball I.D. : .750" Rod End Ball Width 1.750" Base End Ball I.D. : .750" Base End Ball Width : 1.375" Base to Ball Ctr Length : 7.563"


A-TLH07 Hydraulic Top Link Cylinder, Cat II (3" Bore) 18.05 Lbs. Port Sizes .750"-16 ORB

Dim/Info: Stroke Length : 8" Closed Length : 21" Barrell Length : 12.438" Rod End Ball I.D. : 1" Rod End Ball Width 1.750" Base End Ball I.D. : 1" Base End Ball Width : 1.750" Base to Ball Ctr Length : 2.500"


A-TLH08 Hydraulic Top Link Cylinder, Cat I (3" Bore) 13.02 Lbs. All ports .563-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM 90° swivel.

Dim/Info: Stroke Length : 8" Closed Length : 20" Barrell Length : 12.438" Rod End Ball I.D. : .750" Rod End Ball Width 1.750" Base End Ball I.D. : .750" Base End Ball Width : 1.750" Base to Ball Ctr Length : 3.500"


A-VFM3005 Hydraulic Top Link Assembly (Cat ll) 21.19 Lbs.Dim/Info: 32.677" Max. Operating Length 21.654" Min. Operating Length 11.024" Stroke 65 - 120 Max. HP

For Models: FITS SEVERAL MODELS

A-49A1BLUE Top Link, Blue (Cat I) 7.95 Lbs. A-TL03 Top Link, Red (Cat I) 8 Lbs.

Dim/Info: pin hole : .75" thread : 1.125" body : 16" adj : 20.500"-29.00"

For Models:

A-D0NN576A Center Link Assembly (Cat II) 14.31 Lbs.Dim/Info: pin hole : 1" thread : 1.250" body : 16.750 adj : 24.500"-31.250"

For Models: 2910, 5000, 5600, 5610, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710

A-TL08 Top Link Assembly (Cat ll) 9.58 Lbs.Dim/Info: pin hole : 1" thread : 1.125" body : 16" adj : 21" - 33"

For Models: (3000, 5000 ALL 1/65>), 3610 1/81-12/82, 4610 1/81>, 2000 3 CYL. 1/65>

A-D0NN576B Center Link Assembly (Cat I & II) 14.87 Lbs.Dim/Info: pin hole : .750"/1" thread : 1.250" body : 18.750" adj : 24.500" - 31.250"

For Models: 4600SU, 4610SU, 3600 1/75-9/78, 3610 1/81-12/82, 4000 3 CYL. 1/65-6/71, 3000 4/70>


131


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-D0NNA914B Top Link End (Cat. II) 5.32 Lbs.Dim/Info: 1 1/4" LH Thread

For Models: 2810, 2910, 3000, 3055, 3230, 3430, 3550, 3900, 3910, 3930, 4000 1965>, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 5000, 5100, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700

A-RE06 Replacement End (Cat. ll) 4.02 Lbs.Dim/Info: hole : 1" RH thread : 1.250"

For Models:

A-SLH01 Hydraulic Side Link Cylinder, Cat 0 Base End w/ Clevis Rod End (2" Bore) 9.74 Lbs. All ports .563"-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-550, 13-599, 13-604, 13-780 Dim/Info: Stroke Length : 4" Closed Length : 15.500", 16.500" & 17.500" Barrell Length : 8.437" Base End I.D. : .750" Base End Width 1.375" Base to Ball Ctr Length : 3.875"

A-SLH01RK Seal Kit 0.05 Lbs.For Models: FITS SEVERAL MODELS Check Dimensions For Your Application

A-SLH02 Hydraulic Side Link Cylinder, Clevis Ends (3" Bore) 16.71 Lbs. All ports .563"-18 ORB w/ two adapters .563" -18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-528 Dim/Info: Stroke Length : 4" Closed Length : 19.500", 21.500", 26" & 27.250" Barrell Length : 8.437" Clevis Rod Width : .750" Clevis Base .625" Hole, 2" Width & 2" Depth Clevis Holes : .750" Upper Hole, .625" Lower Holes


A-SLH03 Hydraulic Side Link Cylinder, Cat I Base End/ Clevis Rod End (3" Bore) 18.61 Lbs. All ports .563"-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-812 Dim/Info: Stroke Length : 4" Closed Length : 20.500", 22.500", 26.875" & 28" Barrell Length : 8.438" Clevis Rod Width : .875" Clevis Holes .750" Base End Ball I.D. : .875" Base End Width : 1.750" Base to Ball Ctr Length : 1.750"


A-SLH04 Hydraulic Side Link Cylinder, Clevis Ends (3" Bore) 17.33 Lbs. All ports .563"-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM 90° swivel.

Replaces: Gannon 13-560 Dim/Info: Stroke Length : 4" Closed Length : 23" Barrell Length : 8.438" Rod End Clevis Hole : .750" Rod End Clevis Width .750" Base End Clevis Hole : .750" Base End Clevis Width : 2" Base End Clevis Depth : 3"


A-EC0NN577AB Universal Economy Leveling Assembly 6 Lbs.Dim/Info: length : 19.250" adj : 17.750" min / 25.500" max pin holes : .625"

For Models: ALL MODELS

A-8N577A Leveling Box Assembly w/ Fork (RH) 11 Lbs. Adjustment is 18" to 21" center hole to center hole.

A-957E566 Knuckle 0.8 Lbs.

A-9N595 Pin 0.32 Lbs.

A-C5NN594E Handle 0.66 Lbs.

A-NCA577A Leveling Box Assembly w/o Fork (RH) 6.21 Lbs.

A-EC0N585A Fork 4.5 Lbs.

For Models: NAA(JUBILEE), 2N, 8N, 9N

A-8N564B Lift Rod Assembly (LH) 8.3 Lbs.


A-9N595 Pin 0.32 Lbs.

A-C5NNB863A Yoke Rod (LH) 2.1 Lbs.

A-EC0N585A Fork 4.5 Lbs.

For Models: NAA(JUBILEE), 2N, 8N, 9N


132


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-6N577A Leveling Box Assembly w/ Fork (RH) 10.92 Lbs. Adjustment is 20.250" to 25.250" center hole to center hole.


A-9N595 Pin 0.32 Lbs.



A-NCA585B Fork 4.5 Lbs.

For Models: 600, 700, 800, 900

A-6N564B Leveling Rod Assembly (LH) 8.54 Lbs. Includes: A-C5NNB863A rod, A-NCA585B fork, & A957E566 knuckle.

Replaces: NCA564B


A-9N595 Pin 0.32 Lbs.

A-C5NNB863A Rod, Yoke (LH) 2.1 Lbs.

A-NCA585B Fork 4.5 Lbs.

For Models: 600, 700, 800, 900

A-E0NN569AA Leveling Box Assembly w/ Fork (RH) 10.64 Lbs. Adjustment is 20.250" to 25.250" center hole to cntr hole.


A-9N595 Pin 0.32 Lbs.



A-E0NN585BA Fork 4.36 Lbs.

For Models: 2000, 2100, 2600, 2610, 3000, 3100, 3600, 3610, 4110, (340, 3400, 3550, 420 ALL UTIL)

A-2N564B Complete Lift Arm (LH) 8.6 Lbs. Includes: A-C5NNB863A rod, A-E0NN585BA fork, & A-957E566 knuckle.


A-9N595 Pin 0.32 Lbs.

A-C5NNB863A Yoke Rod (LH) 2.1 Lbs.

A-E0NN585BA Fork 4.36 Lbs.

For Models: 2000, 2100, 2600, 2610, 3000, 3100, 3600, 3610, 4110, (340, 3400, 3550, 420 ALL UTIL)

A-C5NN569AM Leveling Box Assembly w/ Fork (RH) 13.82 Lbs. Adjustment is 27.250" to 32.250" center hole to center hole.


A-9N595 Pin 0.32 Lbs.



A-C5NN585B Fork 3.7 Lbs.

For Models: 4000, 4600

A-4N564B Complete Lift Arm (LH) 11.08 Lbs. Includes: A-E4NNN673AA rod, A-C5NN585B fork, & A-957E566 knuckle.


A-9N595 Pin 0.32 Lbs.

A-E4NNN673AA Yoke Rod (LH) 3.5 Lbs.

A-C5NN585B Fork 3.7 Lbs.



133


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-D2NNN983WF Leveling Box Assembly w/ Fork (RH) 30.75 Lbs. Adjustment is 25.000" to 31.000" center hole to center hole.

A-C5NNP929A Knuckle Assembly 1.98 Lbs.

A-C5NNC999A Handle 0.66 Lbs.

A-D2NNN983A Leveling Box Assembly (RH) 20 Lbs.

A-C5NNN579C Rod w/ Gear 6.2 Lbs.

A-C7NN568B Gear, Bevel 0.24 Lbs.

A-C7NNA935C Fork 11.13 Lbs.

For Models: 5000, 5100, 5200, 5600, 6600, 6610, 6700, 7100, 7200, 7600, 7700

A-D2NNN984A Leveling Rod Assembly (LH) 20.4 Lbs.

A-C5NNB863C Yoke Rod (LH) 6.25 Lbs.

A-C5NNP929A Knuckle Assembly 1.98 Lbs.

A-C5NNN936A Pin 0.65 Lbs.


For Models: 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6600C, 6600O, 6610, 6610O, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7600C, 7610, 7610O, 7700, 7710


For Models: 5000, 5100, 5110, 5200, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210

A-E0NN569KB-KIT Leveling Box Assembly w/ Fork 25.9 Lbs. Does not include fork

For Models: TW15, TW25, TW35, TW5, 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210

A-SBA344140101 Upper Lift Rod Pin 0.36 Lbs.

For Models: 1200 1/79>, (1110, 1210 ALL 1/83>)

A-SBA370910990 Pin, Lower Lift Rod 0.16 Lbs.

For Models: (1215, 1220 ALL 1/87 - 10/98), (1120, 1720 ALL 1/87>), (TC18, TC21, TC21D ALL 11/98>)

A-86402629 Lift Rod 5.31 Lbs. Used on models TC25, TC25D, TC29, TC29D, TC33 & TC33D w/ standard hitch SN G021527> & deluxe hitch SN G023195> & between SNG021299-G021451.

Dim/Info: 15.62", 17.12", 18.62"

For Models: (TC35D, TC40D, TC45D ALL W/ DELUXE HITCH), (TC35, TC40, TC45 ALL W/ ECONOMY OR DELUXE HITCH), (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL W/STD. HITCH SN G021527> & DLX. HITCH SN G023195> (SEE NOTE))

A-SBA370200380 Lift Rod (LH) 4.49 Lbs.Dim/Info: 14.62", 16.12", 17.62"

For Models: 1200 1/79>, (1110, 1210 ALL 1/83>)


For Models: (1300, 1500, 1700, 1900 ALL 1/79>), (1310, 1510, 1710, 1910 ALL 1/83>)


For Models: (1320, 1520, 1620, 1720, 1920 ALL 1/87>), 1715 1/93>

A-86526733 Lift Rod 5.36 Lbs. On models TC25, TC25D, TC29, TC29D, TC33 & TC33D used on models w/ standard hitch SN <G021526 & deluxe hitch SN <G02198 & Between SN G021452 - G023194.

Dim/Info: 15.75", 17.25", 18.75"

For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL W/ STD. HITCH SN <G021526 & DLX. HITCH SN <G02198 (SEE NOTE)), (1530, 1630, 1725, 1925 ALL 10/96>)








For Models: (1120, 1215, 1220 ALL 1/87>), (TC18, TC21, TC21D ALL 7/98>)


134


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-D8NNA937AB-KIT Yoke Rod Assembly w/ Fork 19.15 Lbs.

For Models: TW5, TW15, TW25, TW35, 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210

A-957E555 Lower Lift Arm (RH/LH) 16.68 Lbs.Dim/Info: 5/8" Thick 32" Center To Center

For Models: DEXTA

A-9N555B Lower Lift Arm (RH/LH), Cat. l 11 Lbs. This arm is heat treated.

Dim/Info: .875" Pin Holes 31.750" Long (hole ctrs)

For Models: 2N, 8N, 9N, NAA(JUBILEE) 1953-1954

A-SBA370101641 Pull Arm (RH/LH) 14.28 Lbs.Dim/Info: 5/8" x 2 1/2" 28.00" Center to Center

For Models: (1120, 1215, 1220 ALL 1/87 - 10/98), (TC18, TC21, TC21D ALL 11/98>)


For Models: 1200 1/79>, (1110, 1210 ALL 1/83>)


For Models: (1300, 1500 ALL 1/79>), (1310, 1510 ALL 1/83>), 1710 1/85>

A-SBA370101092 Pull Arm (RH/LH) 13.84 Lbs.Dim/Info: 5/8" x 2 1/2" 27.87 Center to Center

For Models: (1320, 1520, 1620 ALL 1/87>), 1715 1/93>

A-SBA370100351 Pull Arm (RH/LH) 18.03 Lbs.Dim/Info: 3/4" x 2 1/2" 31.81 Center to Center

For Models: (1700, 1900 ALL 1/79>), (1710, 1910 ALL 1/83>)


For Models: 1720 SN <UL27965 1/87 - 9/89, 1920 SN <UP26442 1/87 - 9/98


For Models: 1720 SN UL27965> 10/89>, 1920 SN UP26442> 10/89>



A-SBA370101153 Pull Arm (RH/LH) 21.04 Lbs.Dim/Info: 3/4" x 3 31.81 Center to Center


A-C5NN556AB Lower Pull Arm, LH 0 Lbs.

For Models: 5000, 5100, 5200, 5340, 7000, 7100, 7200

A-86402638 Pull Arm (RH/LH) 16.4 Lbs.Dim/Info: 7/8" x 2 3/8" 27.81" Center to Center

For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL SN G021527> W/ STANDARD HITCH)


For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL SN <G021526 W/ STANDARD HITCH), (1530, 1630, 1725, 1925 ALL 10/96> W/ STANDARD HITCH)


For Models: (TC35, TC40, TC45 ALL W/ ECONOMY HITCH)

A-5160313 Arm, Pull 31 Lbs.Replaces: 5122242

For Models: TD60D, TD70D, 4835

A-5131564 Arm, Pull 31 Lbs.Replaces: 5199407, 5118350, 5158928

For Models: TD75D, TD80D, TD90D, TL70, TL80, TL80A, TL90, TL90A, TL100, TL100A, 4835, 5530, 5635, 6530, 6635, 7635

A-D0NN555C Lower Lift Arm (LH), Cat. I 16.68 Lbs.Dim/Info: 9/16" Thick 31.75 Ctr. Ball To Ctr. Ball

A-D0NN555D Lower Lift Arm (RH), Cat. 1 16.68 Lbs.

For Models: (2000, 2600, 3000, 3600 ALL 1965 To 1981), (600, 800 ALL 1955 To 1964), 3610

A-81821330 Lower Lift Arm (RH/LH), Cat. ll 22 Lbs.Replaces: 82002004, C5NN555AL, C7NN555S

Dim/Info: 34.646" Ctr-Hole-To-Ctr Hole 3.504" Wide .709" Thick Rigid Forged Type Ends

For Models: 250C, 260C, 2810, 2910, 3000, 3055, 3230, 3430, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 445D, 4500, 4600, 4610, 4630, 4830, 5030, 515, 532, 535, 545D

A-81826806 Lower Pull Arm (RH/LH), Cat. ll 31 Lbs.Replaces: D2NN555D

Dim/Info: 36.614" Ctr-Hole-To-Ctr Hole 3.937" Wide .787" Thick Rigid Forged Type Ends

For Models: 5000 <6/1973, 5110, 5600, 5610, 5700, 5900 1985-1988, 6410, 6600, 6610, 6700, 6710, 6810

A-C5NN557A Ball, Lift Link (Cat. II) 1.06 Lbs.Dim/Info: 1.125" I.D. 2.250" O.D. 1.750" Wide

For Models: 5000, 3000 1/65>, 2600 1/75>, 3610 1/81-12/82, 2610 1/81-4/83, 4610 1/81>, 4000 3 CYL. 1/65>

A-C5NN557B Lift Link Ball (Cat II) 0.9 Lbs.Dim/Info: 1.125" ID 2.250" OD 1.375" Wide

For Models: 5000, 3000 1/65>, 2600 1/75>, 3610 1/81-12/82, 2610 1/81-4/83, 4610 1/81>, 4000 3 CYL. 1/65>


135


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-E1ADDN995233 Lift Link Ball (Cat I) 1.08 Lbs.Dim/Info: .875" I.D. 2.250" O.D. 1.367" Wide

For Models: 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 4610 1/81>, 4000 3 CYL. 1/65>, 2000, 2810, 2910, 3055, 3120, 3300, 3400, 3500, 3910, 4000, 4110, 4610, 4830, 5000 1965>, 5030

A-E0NN557AA Lift Link Ball (Cat. l) 1.11 Lbs.

For Models: 4610 12/81>

A-E0NN557BA Lift Link Ball (Cat II) 1.05 Lbs.

For Models: 4610 12/81>

A-C5NNN557B Retainer Spring, Lift Link Ball 0.04 Lbs.Dim/Info: Dual Category

For Models: DEXTA, MAJOR, 3000, 4000, 5000

A-LP03 Pin, Cat. I Lift; 2 Per Package 2.25 Lbs.Replaces: 9613214

Dim/Info: thread : .875" pin dia. : .875" length : 5.500"

For Models: SEVERAL

A-SB631 Mounting Bracket, Stabilizer Arm 4 Lbs.Dim/Info: 6.750" Long .375" Thick 4 Round Holes 2 Slotted Holes

For Models: NAA(JUBILEE), 600, 8N, 800, 9N

A-231253 Heavy Duty Stabilizer Kit 23 Lbs. Heavy duty arms & universal bracket


A-9N5374B Upper Stay Strap (BLU) 3 Lbs.Dim/Info: 25.500" Long .250" Thick 1.500" Wide .937" Hole .613" X 6.625" Slot

For Models: NAA(JUBILEE), 600, 700, 8N, 800, 9N, 900

A-49B61R Drawbar Stay Arm, Upper (RED) 2.64 Lbs.


A-SA01 Stabilizer Arm, Cat I 5.88 Lbs.Dim/Info: .875" hole 31.562" ctr to ctr 33.500" overall Length .375" thick 1.750" wide


A-9N5375B Lower Stay Strap (BLU) 3 Lbs.Dim/Info: 29.000" Long .920" Hole .250" Thick 1.500" Wide .620" X 6.625" Slot


A-49B300R Universal Economy Stabilizer Arm (RH) 7 Lbs. A-49B300L Universal Economy Stabilizer Arm (LH) 7.05 Lbs.

Dim/Info: .920" Hole 31.500" Ctr. to Ctr. 33.500" Overall Length .375" Thick 2.00" Wide

For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4110

A-C5NNN455C Stabilizer Arm, Cat. l (LH) 6.75 Lbs. A-C5NN454C Stabilizer Arm, Cat. l (RH) 4 Lbs.

Dim/Info: .875" Hole

For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4110

A-C5NN454B Stabilizer Arm (RH) 7.4 Lbs. A-C5NNN455B Stabilizer Arm (LH) 4 Lbs.

Dim/Info: .875" & 1.125" Hole 31.500" & 32.00" Ctr to Ctr .375" Thick 2.00" Wide Dual Category

For Models: (2000, 2600, 3000, 3600, 4000, 4600 ALL W/ DRY BRAKES)

A-49B450 Stabilizer Arm 6.6 Lbs.Dim/Info: 32.625" Long .375" Thick 2.000" Wide 30.750" Outside Ctr 26.187" Inside Ctr 1.00" Outer Hole Dia .875" Inside Hole Dia


A-9N563 Shaft, Lower Link Support 0.65 Lbs.

For Models: 2N, 9N

A-47P1050 Stabilizer Eyebolt 0.1 Lbs. Used to repair A-49A93 chain type adjustable stabilizer.

Dim/Info: 3/4" - 10 LH Thread

For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000, 765

A-C5NNN916B Chain Strap, (RH) 0.05 Lbs. A-C5NND915B Chain Strap (LH) 0.05 Lbs.


A-C5NNA945C Clevis, Check Chain 0.25 Lbs.

For Models: 3100 1/65>, (2600, 3600, 4600SU ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>


136


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-D0NNA945A Clevis, Check Chain 0.3 Lbs.

For Models: 4140, 4600SU, 4610SU, 3600 1/75>, 3610 1/81-12/82, 3000 4/70>

A-D0NN582A Clevis, Check Chain 0.01 Lbs.


A-SBA344140121 Pin, Upper Lift Rod 0.4 Lbs.

For Models: TC24D, (1120, 1215, 1220 ALL 1/87>), (TC18, TC21, TC21D ALL 7/98>)

A-NCA563C Pin, Lower Lift Link 0.82 Lbs.

For Models: NAA(JUBILEE), 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 8N, 800, 801, 900, 901

A-NCB563A Pin, Lower lift link 0.64 Lbs.

For Models: (800, 900 ALL 1/55>), (2000, 4000 ALL 4 CYL. 1/55>)

A-E4NNF537AA Pin, Lower Lift Link 2.4 Lbs.

For Models: 5000 1/65>, 4000 3 CYL. 1/65>

A-D0NN563D Pin, Lower Lift Link 1.22 Lbs.Dim/Info: 5.970" Long .750" Thread

For Models: 4600SU, 3600 1/75>, 3610 1/81-12/82, 4610 1/81>, 4000 3 CYL. 3/70>

A-NCB521B Stud, Lift Link Hanger 0.98 Lbs.

For Models: (4000, 900 ALL 1/55>)

A-957E560 Pin, Center Link 1.1 Lbs.

For Models: 8N, 9N, (800, 900 ALL 1/53>), (3000, 5000 ALL 1/65>), (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 4000 4 CYL. 1/53>, 2000 4 CYL. 1/53>, 3 CYL. 1/65>, 4610 5/83>

A-C9NNB927A Pin, Center Link (Cat. II) 1.1 Lbs.Dim/Info: 4.00" Long

For Models: (3000, 5000 ALL 1/65>), 3600 1/75>, 3610 1/81-12/82

A-E0NNB927AB Pin, Center Link (Cat. I) 0.2 Lbs.

For Models: 3610, 3610N 1/81-12/82, 2610 1/81-4/83

A-C5NNF847A Pin, Center Link (Cat. II) 1.05 Lbs.Dim/Info: 3.65" Long

For Models: NAA(JUBILEE), 3000 1/65>, 3600 1/75, 3610 1/81-12/82, 4610 1/81>, 4000 3 CYL. 1/65>

A-SBA370911000 Pin, Top Link 1.1 Lbs.Dim/Info: .750" dia. 2.75" useable 4.50" overall

For Models: TC25D, TC30, TC35, TC35D, TC40, TC45, TC45D, 1710 1/85>, (1120, 1215, 1220, 1320, 1520, 1620, 1720, 3415 ALL 1/87>), 1715 1/93>, (1530, 1630, 1725, 1925 ALL 10/96>), (TC18, TC21, TC21D ALL 7/98>), (TC25, TC29, TC29D, TC33, TC33D ALL 9/98>)

A-C5NNN563A Pin, Lower Lift Link 1.02 Lbs.

For Models: 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-E0NN563CB Pin, Lower Lift Link 1.58 Lbs.Dim/Info: 5.880" Long 1" - 12 Thread

For Models: 4610 1/81>, 5000 2/72>

A-D0NNA865A Bushing, Lower Lift Link 0.09 Lbs.

For Models: 4600SU, 4610SU, 3600 1/75>, 3610 1/81-12/82, 4000 3 CYL 3/70>, 4610 5/83>

A-C7NN595A Pin, Leveling Fork 0.49 Lbs.

For Models: (2600V, 3600, 3600V ALL 1/75-8/77)

A-C5NN595B Pin, Leveling Fork 0.24 Lbs.

For Models: 3000 1/65>, (2600V, 3600, 3600V ALL 1/75>), 2610 1/81>

A-C5NNN561A Pin, Check Chain Clevis 0.02 Lbs.


A-380221S36 Pin, Clevis 0.16 Lbs.Dim/Info: .625" X 1-29/64"

For Models: 340A, 340B, 445A, 515, 532, 540A, 540B, 545A, 2810, 2910, 3055, 3550, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4600, 4610, 4610N, 4610V

A-APN582A Stabilizer Clevis w/ Pin 0.11 Lbs. Used w/ CBPN598A - (Fits all models <1964).

For Models: NAA(JUBILEE), NAB, 2N, 600, 700, 8N, 800, 9N, 900, (2000, 4000 ALL <1964)

A-EC0N660A Eyelet Assembly, Check Chain 0.04 Lbs.Dim/Info: .563"-18 Thread

For Models: NAA(JUBILEE), 2N, 8N, 9N, 600, 700, 800, 900, 2000 4 CYL. ROW CROP 1/53>, 4000 ROW CROP 1/53>


137


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-C5NN678A Eyelet, Check Chain (LH) 0.34 Lbs.

For Models: 900, 800 1/55>, 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>, 4 CYL. 1/55>, 4000 4 CYL. 1/55>

A-C5NN667A Eyelet, Check Chain (RH) 0.34 Lbs.

For Models: (800, 900 ALL 1/55>), 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>, 4000 4 CYL. 1/55>

A-NCA667A Stabilizer Eyelet (RH) 0.36 Lbs. A-NCA678A Stabilizer Eyelet (LH) 0.38 Lbs.

For Models: NAA(JUBILEE), 2N, 2000, 2600, 3000, 3100, 3300, 3310, 3400, 3500, 4000, 600, 700, 8N, 800, 9N, 900

A-C5NNA947A Eyelet, Check Chain (RH) 0.3 Lbs. A-C5NNA948A Eyelet, Check Chain (LH) 0.3 Lbs.

For Models: (2600, 3000, 3600 ALL 1/65>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-957E597 Anchor, Check Chain (RH) 0.38 Lbs. A-957E596 Anchor, Check Chain (LH) 0.38 Lbs.

For Models: NAA(JUBILEE), 2610, 3000, 3610, 600, 8N, 800, 9N, 900, 2000 3 CYL.

A-C5NN596A Anchor, Check Chain 1.42 Lbs.

For Models: 3000 1/65>, (2600N, 3600 ALL 1/75>), 3610N 1/81-12/82, 2310 3 CYL. 1/65>

A-D2NN581A Anchor, Check Chain 3.5 Lbs.


A-D2NN581B Anchor, Check Chain 7.4 Lbs. For use w/ large tires.


A-CBPN598A Stabilizer Chain 0.88 Lbs.

For Models: NAA(JUBILEE), 1801, 2N, 2000, 4000, 600, 601, 700, 701, 8N, 800, 801, 9N, 900, 901

A-CFPN936B Check Chain Assembly 0.88 Lbs.

For Models: 3230, 3430, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030

A-SBA370050250 Stabilizer Link, Rear 1.5 Lbs.Dim/Info: A : M16 x 1.5 RH B : M14 x 2.0 RH C : M14 x 2.0 LH

For Models: (1320, 1520, 1620 ALL 1/87 - 7/92)

A-SBA370050240 Stabilizer Link, Rear 2 Lbs.Dim/Info: A : M18 x 1.5 RH B : M14 x 2.0 RH C : M14 x 2.0 LH

For Models: 1920 SN <UP26442 1/87 - 9/89, 1720 1/87 - 9/89

A-SBA370500911 Stabilizer Link, Rear 1.08 Lbs.Dim/Info: A : M16 x 1.5 RH B : 12.00" C : M14 x 2.0 RH

For Models: 1600 1/73>, (1200, 1700, 1900 ALL 1/79>), (1110, 1210, 1710, 1910 ALL 1/83>)


For Models: TC30, 1715 1/93>, (1320, 1520, 1620 ALL 8/92>)

A-SBA370050271 Stabilizer Link, Rear 2.08 Lbs.Dim/Info: A : M18 x 1.5 RH B : 8.25" C : M16 x 2.0 RH D : M16 x 2.0 LH


A-SBA370050310 Stabilizer Link, Rear 2.2 Lbs.Dim/Info: A : M18 x 1.5 RH B : 13.25" C : M14 x 2.0 RH D : M14 x 2.0 LH

For Models: 1920 SN UP26442> 10/89>, 1720 9/89>


For Models: (1300, 1500 ALL 1/79>), (1310, 1510, 1710 ALL 1/83>), (1120, 1215, 1220 ALL 1/87>), (TC18, TC21, TC21D, TC24D ALL 7/98>)

A-SBA370500920 Stabilizer Link, Rear 1.92 Lbs.Dim/Info: A : M16 x 2.0 RH B : 11.00"

For Models:

A-SBA370500500 Stabilizer Link, Tractor End 0.92 Lbs.Dim/Info: A : 6.00" B : M14 x 2.0 LH

For Models: TC24D, TC30, (1200, 1300, 1500, 1700, 1900 ALL 1/79>), (1110, 1210, 1310, 1510, 1710, 1910 ALL 1/83>), (1120, 1215, 1220, 1320, 1520, 1620 ALL 1/87>), 1715 1/93>, (TC18, TC21, TC21D ALL 7/98>)

A-SBA370500510 Stabilizer Link, Tractor End 0.92 Lbs.Dim/Info: A : 9.312" B : M14 X 2.0 LH

For Models: (1720, 1920 ALL 1/87>)


138


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA






For Models:

A-SBA399160220 Turnbuckle, Stabilizer Link 0.73 Lbs.Dim/Info: A : M16 x 2.0 RH-LH

For Models:

A-SBA399160190 Turnbuckle, Stabilizer Chain 0.73 Lbs.Dim/Info: A : M14 x 2.0 RH-LH

For Models: (1300, 1500, 1700, 1900 ALL 1/79>), (1310, 1510, 1710, 1910 ALL 1/83>)

A-49A93 Stabilizer Chains, Set 13.6 Lbs. 1 set of 2 stabilizers for Ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or own one link of the stabilizer accordingly.


A-VPL3232 Compact Stabilizer Link, Adjustable 3.6 Lbs. Used for compact tractors.

Dim/Info: 15.500" - 19.500" Adj.


A-47P1052 Stabilizer Chain w/ Eyebolt 0.15 Lbs. Used to repair A-49A93

Dim/Info: RH Thread


A-47P1053 Stabilizer Clevis w/ Pin 0.63 Lbs. Used to repair A-49A93


A-355278S36 Stabilizer Pin 0.5 Lbs.Replaces: 81824450

Dim/Info: 5/8" X 2 3/8"

For Models: 3230, 3430, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, MAJOR, POWER MAJOR, SUPER MAJOR

A-47P1049 Center Tube, Stabilizer 0.8 Lbs. Used to repair A-49A93 chain type stabilizer.

For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000

A-CFPND936B Stabilizer Chain Assembly 8.3 Lbs.

For Models: 3055, 4600, 5000, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710

A-957E591 Check Chain 0.68 Lbs.

For Models: 2000 3 CYL.

A-C5NN591D Check Chain 0.3 Lbs.

For Models: 2600N, 2600V, 3600V

A-E0NN591AA Check Chain 0.3 Lbs.

For Models: 3610N 1/81-12/82, 3600N 4/81>

A-D2NNA946B Check Link (12") 1.25 Lbs.

For Models: 4610 1/81>, 4000 3 CYL 1/65>

A-C7NN591A Check Chain 0.82 Lbs.

For Models: 4610SU, 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-D2NNA946A Check Link (8.5") 2.94 Lbs.


A-FP165 Check Chain Clevis Kit 0.12 Lbs.

For Models: 2310, 2600N, 3000, 3600, 3600N, 4000, 8N, 9N, 900

A-C5NN591F Check Chain w/o Clevis 0.75 Lbs.


A-E1NNR837AA Nut, Check Chain Adjusting 2.3 Lbs.

For Models: 2000 3 CYL. 10/69>

A-230044 Stabilizer Pin 0.42 Lbs.Dim/Info: .625"-11 X 2.625" Thread .875" Pin Dia 2.625" Length .500" Pin Hole



139


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-HD58LW Washer 5/8" Lock 0.1 Lbs. Used w/ A-181777M1 stabilizer pin.


A-49A800 Universal Stabilizer Kit 38.75 Lbs. Extra heavy duty, check dimensions before ordering.

Dim/Info: 25.250" Extended 19.500" Closed Painted Primer Red


A-D9NNB856BB Complete Stabilizer Assembly 12.28 Lbs. Kit includes: key parts 2 thru 11 plus 16.

A-D9NNR831AA Coupling (Ref. 2) 1.21 Lbs. A-D9NNN873BA Pin (Ref. 3) 0.16 Lbs. A-D9NNP999BA Bar Assembly (Ref. 4) 3.34 Lbs. A-D9NNP997AA Pin (Ref. 5) 0.44 Lbs. A-D9NNR833BB Tube Assembly (Ref. 6) 4.22 Lbs. A-D9NNN873AA Pin (Ref. 7) 0.4 Lbs. A-D9NNR832BA Shackle (Ref. 8) 1.22 Lbs. A-D9NNA931BA Spacer (Ref. 9) 0.02 Lbs. A-58747S36 Bolt (Ref. 10) 0.52 Lbs. A-34992S7 Nut (Ref. 11) 0.11 Lbs. A-C5NN16N321A U-Bolt (Ref. 12) 1.72 Lbs. A-HD58NCNUT Nut (Ref. 13) 0.07 Lbs. A-C7NND933B Bracket, RH (Ref. 14) 6.94 Lbs. A-C7NND932B Bracket, LH (Ref. 15) 7.12 Lbs. A-304898S36 Bolt (Ref. 16) 0.43 Lbs.

For Models: 2910, 3910, 4110, 4610

A-D9NNB856AA Complete Stabilizer Assembly 13.02 Lbs. Kit includes: key parts 2 thru 11, plus 16.

A-D9NNR831AA Coupling (Ref. 2) 1.21 Lbs. A-D9NNN873BA Pin (Ref. 3) 0.16 Lbs. A-D9NNP999BA Bar Assembly (Ref. 4) 3.34 Lbs. A-D9NNP997AA Pin (Ref. 5) 0.44 Lbs. A-D9NNR833AA Tube Assembly (Ref. 6) 5.16 Lbs. A-D9NNN873AA Pin (Ref. 7) 0.4 Lbs. A-D9NNR832BA Shackle (Ref. 8) 1.22 Lbs. A-D9NNA931BA Spacer (Ref. 9) 0.02 Lbs. A-58747S36 Bolt (Ref. 10) 0.52 Lbs. A-34992S7 Nut (Ref. 11) 0.11 Lbs. A-388838S36 U-Bolt (Ref. 12) 1.9 Lbs. A-HD58NCNUT Nut (Ref. 13) 0.07 Lbs. A-C7NND932A Bracket, LH (Ref. 14) 8.76 Lbs. A-C7NND933A Bracket, RH (Ref. 15) 8.38 Lbs. A-304898S36 Bolt (Ref. 16) 0.43 Lbs.

For Models: 5610, 6610, 6710, 7610, 7710, 8210

A-49A29 Lock, Drawbar (Cat I) 4 Lbs. For Cat I drawbars. Prevents drawbar from rotating.


A-49A34R Swinging Drawbar Kit 34 Lbs. Color: RED

Dim/Info: 2.000" Wide 1.000" Thick 29.375" Long

A-49B70R Drawbar 16 Lbs. A-49B71R Rear Drawbar Hanger 11 Lbs. A-49B73R Drawbar Clevis Assembly 4 Lbs. A-49B74 Drawbar Clevis Pin 0.5 Lbs.

For Models: NAA(JUBILEE), 600, 8N

A-SBA370710110 Drawbar, Swinging 19.2 Lbs.Dim/Info: 2.500" Wide 1.000" Thick 28.620" Long

For Models: (1300, 1500 ALL 1/79>), (1310, 1510, 1710 ALL 1/83>)

A-SBA370710030 Drawbar, Fixed 25 Lbs.Dim/Info: 2.380" Wide 1.120" Thick 33.750" Long

For Models: 1600 1/73>, (1700, 1900 ALL 1/79>), 1910 1/83>

A-SBA370700031 Drawbar, Swinging 26 Lbs.Dim/Info: 2.930" Wide 1.000" Thick 32.060" Long

For Models: (1700, 1900 ALL 1/79>), 1910 1/83>


140


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-SBA370710290 Drawbar, Swinging 18 Lbs.Dim/Info: 2.375" Wide 1.130" Thick 25.370" Long

For Models: (1320, 1520, 1620, 1715 ALL 1/87>)

A-SBA370710180 Drawbar 20 Lbs.Dim/Info: 2.375" Wide 1.125" Thick 28.190" Long

For Models: (1720, 1920, 3415 ALL 1/87>)

A-SBA370710260 Drawbar 17 Lbs.Dim/Info: 2.350" Wide 1.190" Thick 23.500" Long

For Models: TC30, 1320, 1520, 1620, 1715, 1720, 1920, 3415

A-86402585 Drawbar 19 Lbs.Dim/Info: 2.380" Wide 1.180" Thick 25.250" Long

For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL SN G033361> W/ DELUXE HITCH), (TC35, TC35D, TC40, TC40D, TC45, TC45D ALL SN G508566> W/ DELUXE HITCH)


For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D, TC35, TC35D, TC40, TC40D, TC45, TC45D ALL W/ DELUXE HITCH), (1530, 1630, 1725, 1925 ALL 10/96> W/ DELUXE HITCH)


For Models: 4835, 5635, 6635, 7635, TL100, TL70, TL80, TL90

A-SBA370710510 Drawbar, Swinging 16.15 Lbs.Dim/Info: 2.375" Wide 1.090" Thick 23.500" Long

For Models: TC30

A-VPL4434 Drawbar, Economy 19.3 Lbs.Dim/Info: 2.00" Wide 1.250" Thick 28" Long


A-C5NN805FSPL Drawbar, Straight 23 Lbs. (4) .937" dia holes @ 1.343", 3.343", 5.718", 7.718" from front. OEM's drawbar for this application has 2.750" offset, A&I's is straight.

Dim/Info: 2" Wide 1.250" Thick 34.625" Long

A-E4NN807AA Pin, Front Drawbar 0.54 Lbs. A-311920 Pin, Drawbar Clevis Spring 0.05 Lbs.

For Models: 2600, 3600, 3900, 4100, 4600, (515, 532 ALL IND)

A-82009197 Drawbar w/ 1.500" Offset 18.5 Lbs. (3) .913" dia. Front holes @ 1.375", 3.375", & 9.375" from front

Dim/Info: 32.875" long 1.875"wide, 1.125"high

A-E4NN807AA Pin, Front Drawbar 0.54 Lbs.

A-311920 Pin, Drawbar Clevis Spring 0.05 Lbs.

For Models: 2600, 2610, 3100, 3600, 3610, (2000, 3000 ALL W/ SWINGING), 4110 W/ SWINGING OR W/O CLEVIS, (2810, 2910, 3910, 4610 ALL W/O CLEVIS), (3230, 3430, 3930, 3930H, 4130, 4630, 4830 ALL 7-90->), 5030 9/92->

A-82009362 Drawbar w/ 2.750" Offset 22.5 Lbs. (2) .922" dia. front holes @ 1.375" & 5.750" from front.

Dim/Info: 32.500" long 2." wide, 1.250" high



For Models: (2810, 2910, 3910, 4100, 4110, 4600, 4610 ALL W/ CLEVIS), 4000 W/ 540 RPM PTO, (3230, 3430, 3930, 3930H, 4130, 4630, 4830 ALL 7/90->), 5030 9/92->

A-86520237 Drawbar, Straight 21.6 Lbs.Dim/Info: 2.00" Wide 1.25" Thick 32.63" Long

For Models: 3230, 3430, 3930, 3930H, 3930N, 3930NO, 4130, 4130N, 4130NO, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 4830O, 5030, 5030O

A-C5NN805F Drawbar w/ 2.750" Offset 23 Lbs. (4) .937" dia. front holes @ 1.343", 3.343", 5.718", & 7.718" from front.

Dim/Info: 2" Wide 1.250" Thick 34.625" Long



For Models: 3900, 4000 W/ 540/1000 PTO 65->, 4100, 4600

A-E0NN805AC Drawbar, Straight 34 Lbs. (3) 1.156" dia holes @ 1.250", 3.250", & 7.750" from front, 3rd hole allows more application than OEM's drawbar.

Dim/Info: 2.5" Wide 1.375" Thick

A-C7NN807C Pin, Front Drawbar 0.95 Lbs.

For Models: 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210


141


MASSEYFERGUSON

DEUTZ

ALLISCHALMERS

AGCO

WHITE/OLIVER

FORD / NEWHOLLAND

CNH

FIAT

CASE-IH

LONG

LEYLAND

LANDINI

KUBOTA

McCORMICK

OTHER

JOHNDEERE

JCB

RENAULT

SAME

VERSATILE

BOBCAT

BELARUS

YANMAR

ZETOR

SCHWARTZSPEECO

VALTRA

A-E3NN805AA12B Drawbar, Heavy Duty 46 Lbs. (2) 1.141" dia. holes @ 1.125" & 2.750" from front.

Dim/Info: 3" Wide 1.375" Thick

A-C7NN807A Pin, Front Drawbar 1.01 Lbs.

For Models: 8160, 8210, 8260, 8360, 8560, TS100, TS110, TS115, TS90

A-82026931 Hammerstrap, Drawbar 9.5 Lbs.

For Models: 8160, 8260, 8360, 8560, TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TM175, TM190, TS100, TS110, TS115, TS115A, TS125A, TS135A, TS90, TV140

A-C5NN805A Drawbar 29 Lbs. (2) 1.156" dia. front holes @ 1.250" & 7.250" from front.


A-C7NN807C Pin, Front Drawbar 0.95 Lbs.

For Models: 7100, 7200, (5000, 7000 ALL 65-6/73)

A-5180877 Drawbar 33 Lbs.Replaces: 82010175, 82004690


For Models: 4835, 5635, 6635, 7635, TL100, TL70, TL80, TL90

A-E9NN805AA Drawbar 34 Lbs. (3) 1.156" dia. front holes @ 1.250", 3.250", & 7.750" from front.



For Models: (7840, 8240, 8340 ALL STD / TOW HOOK), (5640, 6640, 7740 ALL 11-91-> STD / TOW HOOK)

A-D3NN805A Drawbar 47.5 Lbs. (2) 1.141" dia. front holes @ 1.125" & 3.250" from front.


A-D8NN807AA Pin, Front Drawbar 1.17 Lbs.

For Models: 8700, 8830, 9700, (TW5, 7810, 7910, 8210, 8530, 8630, 8730 ALL 3/90->), (TW10, TW20, 8000, 9000 ALL 9/69->)

A-86013306 Drawbar, Straight 69 Lbs.Replaces: 9821047

For Models: 8670, 8670A, G170

A-86013305 Drawbar, Offset 73 Lbs.Replaces: 9860156

For Models: 8770, 8770A, 8870, 8870A, 8970, G190, G210, G240

A-C7NN805A Drawbar 36 Lbs. (2) 1.141" dia. front holes @ 1.250" & 2.875" from front.



For Models: (TW10, 8000, 9000, TW20, TW30 ALL 1/69-8/69)

A-C7NN805C Drawbar 47 Lbs. (2) 1.141" dia front holes @ 1.125" & 2.750" from front.

Replaces: 86509813 Dim/Info: 3.000" Wide 1.375" Thick 41.750" Long

A-C7NN807A Pin, Front Drawbar 1.01 Lbs.

For Models: (TW10, TW20, TW30, 8000, 9000 ALL 1/69-8/69)

A-D8NN805AA Drawbar 64 Lbs. (2) 1.172" dia front holes @ 1.125" & 5.750" from front.

Replaces: D5NN805AA Dim/Info: 3.000" Wide 1.625" Thick 47.250" Long


For Models: TW35, TW30 79->, 8830 83->

A-C7NN807B Pin, Front Drawbar 1.19 Lbs.

For Models: (4000, 5000 ALL 1965>), (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975>)

A-E3NN807AA Pin, Front Drawbar 1.25 Lbs.Dim/Info: 1.25" O.D.

For Models: TS100, TS110, TS115, TS90, 5110, 5610, 5640, 6410, 6610, 6610O, 6640, 6640O, 6810, 7610, 7610O, 7710, 7740, 7740O, 7840, 7840O, 8160, 8210, 8240, 8260, 8340, 8360, 8560

A-311920 Spring Pin, Drawbar Clevis Pin 0.05 Lbs.

For Models: 2000, 2031, 2100, 2131, 2150, 2300, 230A, 231, 2310, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 340, 3400, 340A, 340B, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4031, 4120, 4130, 4131, 4140, 4200, 4330, 4340, 4400, 4410, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 540A, 545A, 545C, 545D, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 801, 901, 941, 951, 96


Documents

Hitch & Dra wbar P arts · ford / new holland cnh fia t case-ih long leyland landini kubo ta mccormick o ther john deere jcb renaul t same versa tile ... hitch & dra wbar p arts