Feel theDifference

Approx. 2 times more durable*1

Best in class drilling speed

& low vibration*2

Hitachi Rotary Hammer SeriesDH24PX / DH26PX / DH28PX

*1: In comparison with conventional models DH24PC3 / DH24PB3*2: As of June 2013. Among 2kg class rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki

*Terms & Conditions apply

Hammering mechanism withair channel system

1

Up to 50% higher volume air cushion reduces wear and damage inside cylinder

Ball bearings2Ball bearings fitted with grease seal to prevent overheating and extend service life and reliability

New internal pressure control mechanism

3

Provides smooth airflow in or out of the gear cover to stabilise pressure and maintain efficient hammering action

1

3

2

Approximately 2 times longer life achieved by robust components, incorporating the same mechanism as Hitachi’s larger hammers

Increased DurabilityDH28X / DH26PX / DH24PX

Air cushion

Air channel

2XMore Durable

Approx.

High-durability hammering mechanism

Ball bearing

Weight

Hammer

Features Hitachi’s User Vibration Protection (UVP) system. This reduces the vibration from concrete drilling or chiseling by moving a counterweight in the opposite direction to the movement of the hammer. Reduction of vibration by approximately 33% makes hammering operations more comfortable

Construction of Low Vibration System

Low VibrationDH 28PXBest in class*2

%33 Approx.

Lower Vibration

The right drill for the right application

3 Mode 2kg Rotary Hammer Drills

DH24PX24mm Rotary Hammer

Hammering mechanism withair channel system

1

Up to 50% higher volume air cushion reduces wear and damage inside cylinder

Ball bearings2Ball bearings fitted with grease seal to prevent overheating and extend service life and reliability

New internal pressure control mechanism

3

Provides smooth airflow in or out of the gear cover to stabilise pressure and maintain efficient hammering action

1

3

2

Approximately 2 times longer life achieved by robust components, incorporating the same mechanism as Hitachi’s larger hammers

Increased DurabilityDH28X / DH26PX / DH24PX

Air cushion

Air channel

2XMore Durable

Approx.

High-durability hammering mechanism

Ball bearing

Weight

Hammer

Features Hitachi’s User Vibration Protection (UVP) system. This reduces the vibration from concrete drilling or chiseling by moving a counterweight in the opposite direction to the movement of the hammer. Reduction of vibration by approximately 33% makes hammering operations more comfortable

Construction of Low Vibration System

Low VibrationDH 28PXBest in class*2

%33 Approx.

Lower Vibration

Approx. 2 times more durable*1

Best in class drilling speed*2 & low vibration*1

DH26PX DH28PX26mm Rotary Hammer 28mm Rotary Hammer

New double moulded handle reduces vibration

Located on side of tool body for easy operation

Large change leverSimple bit mounting

One-push actionfor quick bit mounting

Soft and easy to grip for comfortable operation

Double-moulded side handle

Rotation OnlyFor drilling in steel, wood etc.(with optional drill chuck and chuck adapter)

Hammering OnlyChiseling of concrete, chasing etc

Rotation + HammeringFor drilling into concrete etc

Designed for Ease of Use

360° rotation

Angle adjustment functionWhen using a cold chisel or cutter, the orientation of the tool tip can be adjusted by setting the change lever as shown A bit can be mounted by simply

inserting it into the tool holder(DH28PX / DH26PX)

Powerful motors and optimised hammering achieves up to 30% faster drilling speed*3 to improve work efficiency

Faster Drilling SpeedDH28PX / DH26PXBest in class

30%Faster Drilling

Speed

*2

Up To

*1: In comparison with conventional models DH24PC3 / DH24PB3*2: As of June 2013. Among 2kg class rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki*3: A comparison of the model DH28PX and the conventional model DH24PC3. Mean value for drilling into concrete with drill bits between 8mm and 28mm diameters. The results may vary depending on operating conditions*4: Weight: According to EPTA-Procedure 01/2003.*5: The tri-axial vibration values were measured according to EN60745-2-6.

Model DH28PX DH26PX DH24PX

Capacity Concrete: 3.4-28mm Steel: 13mmCore Bit: 25-50mm Wood: 32mm

Concrete: 3.4-26mm Steel: 13mmCore Bit: 25-50mm Wood: 32mm

Concrete: 3.4-24mm Steel: 13mmCore Bit: 25-50mm Wood: 32mm

Power Input 850W 830W 730W

No-load Speed 0-1100/min 0-1050/min

Full Load Impact Rate 0-4300/min 0-3950/min

Impact Energy 3.4 Joules 3.2 Joules 2.7 Joules

Overall Length 367mm

Weight 2.9kg 2.8kg 2.7kg

Tri-axialVibration Level*5

Hammer drilling into concrete

Vibration emission value ah, HD = 11.5m/s2

Uncertainty K = 1.5 m/s2

Vibration emission value ah, HD = 14.8m/s2

Uncertainty K = 1.5 m/s2

Vibration emission value ah, HD = 15.3m/s2

Uncertainty K = 1.5 m/s2

Equivalent chiseling value

Vibration emission value ah, CHeq = 10.5m/s2

Uncertainty K = 1.5 m/s2

Vibration emission value ah, CHeq = 11.1m/s2

Uncertainty K = 1.5 m/s2

Vibration emission value ah, CHeq = 11.1m/s2

Uncertainty K = 1.5 m/s2

StandardAccessories Side handle, depth gauge, carrying case

Chiseling

Accept various corebits

Chasing

Faster drilling

Breaking

Easy to hold in upright position

Dust cup(Sold separately)

Available from:

While every effort has been made to ensure the accuracy of all information, product descriptions and details are not binding. E & OE.

*Terms & Conditions apply

The Hitachi Extended Warranty scheme now includes electric power toolsFollowing the huge success of the Hitachi Li-Ion tool warranty, you can now register all your electric power tools for an extra 2 years warranty in addition to the standard 12 months.Does not include gas nailers or petrol tools. Online registration is required within 4 weeks of purchase via www.hitachi-powertools.co.uk.

Product Details