Hilti Lul Catalogue

!!!

!!!

!!!!

www.hilti.co.uk

London Underground Approved Products

Section 12 Works

Page Header

8

Installation Systems

For further information visit the Hilti website - www.hilti.co.uk/install or www.hilti.ie

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 8 Installation Systems

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 8 Installation Systems 426

Technical dataMaterial: S 250 GD as per DIN EN 10147 Galvanising: Sendzimir galvanised to approx. 20 microns (275 g/m2)

MQ modular 3D installation systemVersatile in use, innovative labour saving design, great aestheticsAn endless variety of installation jobs done quickly and easily? - The Hilti MQ System makes it possible. No matter whether installing pipes, air ducts, electric cables or erecting supporting structures for a wide variety of purposes, the Hilti MQ system covers an incredibly wide range of applications, with special emphasis on simple time-saving assembly.

As a complete solution, the MQ channel system features single and double channels, pipe rings and pipe ring saddles, washers and angles, brackets, clamps, connectors and supports for countless structural variations.

Total flexibility The MQ system may be quickly modified or adapted to accommodate changing

site situations MQ may be used in as a 3D-system with an unlimited number of connections,

the system allows simple joining of channels Suitable for a huge range of services

Time-saving simplicity Due to the unique labour saving design many applications become a one-man installation The MQ system greatly reduces the need for tools, with many connections just push or

twist fit installation times are therefore much improved Dimension marking allows rapid on site cutting whilst the serrated C-section design

provides easy and accurate positioning of fittings Modular design reduces the need for detailed planning work Preassembled angle pieces allow rapid assembly, easy positioning and fast removal

Stability with attractive design High strength and stability due to modular integration of various channel cross-sections High loading thanks to extended channel programme including swage-joined

double channel Aesthetically pleasing design - ideal where installations remain visible MQ channel is available in hot dipped galvanised and stainless steel to provide

corrosion protection

Comprehensive service packageThe range of products available is complemented by a first-class service package including everything from on-the-spot advice and assistance right through to complete project management including CAD drawings, parts and ordering lists and a cutting and pre-assembly service. For more information, contact your local Hilti Account Manager.


427www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 8 Installation Systems


22.3

63x13.5

41.3

7.5

20.6

2

100

22.3

63x13.5

41.3

7.5

31

2

100

22.3

63x13.5

41.3

7.5

41.3

2

100

22.3

63x13.5

41.3

7.5

41.3

2

100

22.3

63x13.5

41.3

7.5

52

2.5

100

22.3

63x13.5

41.3

7.5

72

2.75

100

22.3

63x13.5

41.3

7.5

41.3

3

100

Installation channels

Features Serrated C-section Installation assisted by dimension marking Great flexibility due to slots Aesthetic appearance Swage-joined double channel Also in HDG and Stainless Steel

Double channels

Channel height Length Metal thickness Weight Ordering Item no.(mm) (m) (mm) (kg/m) designation

41 3 2 2.904 MQ-21D 3 m 369601 41 6 2 2.904 MQ-21D 6 m 369602 82 3 2 4.188 MQ-41D 3 m 369603 82 6 2 4.188 MQ-41D 6 m 369604124 3 2.5/2.75 7.078 MQ-52-72D 3 m 373799124 6 2.5/2.75 7.078 MQ-52-72D 6 m 369605124 6 3 9.841 MQ-124X D 6 m 369606

Technical dataMaterial: S 250 GD as per DIN EN 10147 Galvanizing: Sendzimir galvanized to approx. 20 microns (275 g/m2)

22.3

40x13.5

41.3

7.5

41.22

75

22.3

40x13.5

41.3

7.5

124

75

2.5

2.75

22.3

41.3

7.5

124 3

22.3

40x13.5

41.3

7.5

82.62

75

IBMB no. 3897/1802-5

Channels and firestop tested.

– PLEASE ASK FOR DELIVERY DETAILS.

Single channels


21 3 2 1.438 MQ-21 3 m 36958421 6 2 1.438 MQ-21 6 m 36958531 3 2 1.759 MQ-31 3 m 36958931 6 2 1.759 MQ-31 6 m 36959041 3 2 2.080 MQ-41 3 m 36959141 6 2 2.080 MQ-41 6 m 36959252 3 2.5 2.942 MQ-52 3 m 37379552 6 2.5 2.942 MQ-52 6 m 36959872 3 2.75 4.101 MQ-72 3 m 37379772 6 2.75 4.101 MQ-72 6 m 36959941 3 3 2.910 MQ-41/3 3 m 36959641 6 3 2.910 MQ-41/3 6 m 369597

IBMB no. 3897/1802-5

Channels and firestop tested

Pre-cut channel


41 300 2 2.080 MQ-41 / 300 3441882 41 500 2 2.080 MQ-41 / 500 3441877 41 600 2 2.080 MQ-41 / 600 3441880 41 750 2 2.080 MQ-41 / 750 3441879 41 1000 2 2.080 MQ-41 / 1000 3441878 41 1500 2 2.080 MQ-41 / 1500 3441881 41 2000 2 2.080 MQ-41 / 2000 3441876

Page Header

8




20x14

6

80125

50

300; 450

20x14

8

80125

50

300; 450; 600; 1000

20x14

8

80125

50

300; 450; 600

23x134x

8

145

145

150

600; 1000

150

20x14

10

120165

60

450; 600

20x14

8

80125

50

300; 450; 600

20x14

10

120165

60

1000

Angle braceFor fabricating wall brackets with individual stand-off lengths

Material: S235 JR as per DIN EN 10025Material width: 40 mmMaterial thickness: 4 or 3 mm

Packaging Ordering Item no. A H L contents (pcs) designation

Angle brace, short 355 328 324 45 10 MQK-SK 369622Angle brace, long 635 528 524 45 10 MQK-SL 369621

33

74L

HA

13.5

11

Brackets

Features Serrated C-section Installation assisted by dimension marking Great flexibility due to slots Double-channel brackets welded all around

Technical dataMaterial: S 235 JR as per DIN EN 10025Galvanizing: galvanized, Fe/Zn 13 B as per DIN 50961


Channel length Channel section Weight each Packaging Ordering Item no.(mm) (g) contents (pcs) designation

300 MQ-21 670 10 MQK-21/300 369607 450 MQ-21 890 10 MQK-21/450 369608 300 MQ-41 950 10 MQK-41/300 369609 450 MQ-41 1260 10 MQK-41/450 369610 600 MQ-41 1570 10 MQK-41/600 3696111000 MQ-41 2400 10 MQK-41/1000 369612 300 MQ-41/3 1190 10 MQK-41/3/300 370595 450 MQ-41/3 1630 10 MQK-41/3/450 370596 600 MQ-41/3 2060 10 MQK-41/3/600 370597 600 MQ-41 2540 6 MQK-41/600/4 3696131000 MQ-41 3370 6 MQK-41/1000/4 369614 450 MQ-72 2510 6 MQK-72/450 369615 600 MQ-72 3130 6 MQK-72/600 369616 300 MQ-21-D 1250 10 MQK-21D/300 369617 450 MQ-21-D 1720 10 MQK-21D/450 369618 600 MQ-21-D 2190 10 MQK-21D/600 3696191000 MQ-41-D 5080 6 MQK-41D/1000 369620

IBMB no. 3897/1802-5 VdS G 4970048

For VdS-approved installation see www.hilti.com/vds-installation.

Brackets andfirestop tested

Brackets with VdS approval

VdS




Technical dataGalvanising: galvanised, Fe/Zn 13 B as per DIN 50961

MQ modular channel (fittings)

Features Simple, compact, time saving Single component Easy to use Universal: one and the same nut for all channels Simple removal

PushbuttonBolt: M10 material 8.8 as per DIN/ ISO898Width across flats: 17 mmNut: QStE 380 TM, SEW 92Plate: DD11, DIN EN 10111

Connection Weight each Packaging contents Outside packaging contents Ordering Item no.thread (g) (pcs) (pcs) designation

M10 66 50 300 MQN 00369623

Rec. tensile load, Rec. shear load, Tightening torque, Zrec (kN) Qrec (kN) MD (Nm) Item Channel I Channel II

MQN 5.0 8.0 5.0 1) 40Channel I: MQ-21. MQ-31, MQ-41, MQ-21D, MQ-41D Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD1) Shear loading applies to single fastening. Qrec (kN) 10.0 for two fastenings

Rec. tensile load, Rec. shear load, Tightening torque, Zrec (kN) Qrec (kN) MD (Nm) Item Channel I Channel II (bolt 8.8)

MQM-M 6 3.0 3.0 1.5 10MQM-M 8 5.0 5.0 3.5 20MQM-M 10 5.0 8.0 5.0 40MQM-M 12 5.0 8.0 5.0 40Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D Channel Il: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD

Put in position.

Press and turn. Tighten.

1

2 3

Available in hot dipped galvanised & stainless steel

Wing nut

Nut, M6–M10: QStE 380 TM, SEW 92Nut, M12: QStE 32-2 KGK as per DIN 1654Plastic: PP

Connection Weight each Packaging contents Outside packaging contents Ordering Item no.thread (g) (pcs) (pcs) designation

M 6 21 50 800 MQM-M6 00369624M 8 21 50 800 MQM-M8 00369698M10 21 50 800 MQM-M10 00369626M12 23 50 800 MQM-M12 00369627

Quick-release pipe ring saddlewith push connection for metric threadNut: QStE 380 TM, SEW 92Plate: DD11, DIN EN 10111Plastic: PA 6.6 or PPSpring: stainless steelConnection Packaging contents Ordering Item no.thread (pcs) designation

M8 50 MQA-Q8 00369635

Item Rec. tensile load Zrec (kN) Tightening / manual torque, (Nm) Compression, Frec (kN)

MQA-Q8 1.5 1) 2.01) Recommended static load when fitting pipes up to and including 2 in diameter Put in place. Locate. Lock. Tighten.

Push in.


Page Header

8




IBMB no. 3829/5270

Pipe ring saddle fire tested

Pipe ring saddle

Nut: M6–M10: QStE 380 TM, SEW 92 M10 B–M16 B: GTW 45, DIN 1692Plate: M6–M10: DD11, DIN EN 10111 M10 B–M16 B: S 235 JR, DIN EN 10025Plastic: M6–M10: PA 6.6 M10 B–M16 B: PBConnection Packaging contents Ordering Item no.thread (pcs) designation

M6 50 MQA-M 6 00369628M8 50 MQA-M 8 00369629M10 50 MQA-M10 00369630

For passive fire preventionM10 50 MQA-M10 B 00372471M12 50 MQA-M12 B 00369631M16 50 MQA-M16 B 00369632

Features of MQA Single part, simple and time-saving in use For all types of channels For threaded rods from M6 to M16

Thread L (mm) Packaging Ordering Item No. contents (pcs) Designation

M10 40 50 HHK 41 M10 x 40 312371 M10 60 50 HHK 41 M10 x 60 312373M10 80 50 HHK 41 M10 x 80 312374M10 100 50 HHK 41 M10 x 100 312375M10 150 50 HHK 41 M10 x 150 312377

L = total length of hammer-head bolt

Technical dataHHK 41 M10 Recommended tensile load, Fz rec [N] = 3,500

MQG-2 baseplateMaterial: S 235 JR as per DIN EN 10025Galvanizing: Fe/Zn 13 B as per DIN 50961Connection Weight each Packaging contents Outside packaging Ordering Item no.thread (g) (pcs) contents (pcs) designation

M16 180 20 – MQG-2-M16 369682!" 170 20 – MQG-2- !" 369683"" 185 20 – MQG-2- "" 369684

Rec. tensile load, Rec. shear load, Tightening torque, Bending moment, Item Zrec (kN) Qrec (kN) MD (Nm) threaded rod 4.6 (Nm)

MQG-2-M16 6.0 9.0 40 56.9MQG-2- !" 6.0 9.0 40 22.4MQG-2- "" 6.0 9.0 40 100.0

155

100

M161/2"3/4"1"

50

MQ flat washerThread Dia. Internal Dia. Thickness Item No.

M8 40mm 8.5mm 3mm 282856 M10 40mm 10.5mm 3mm 282857

Rec. tensile load, Rec. shear load, Bending moment, threaded rod 4.6 Zrec (kN) Qrec (kN) Nm1) Item Channel I Channel II

MQA-M 6 2.0 2.0 4 2.6MQA-M 8 3.0 3.0 9 6.4MQA-M 10 4.0 4.0 18 12.8MQA-M 10 B 5.0 8.0 18 12.8MQA-M 12 B 5.0 8.0 31 22.4MQA-M 16 B 5.0 8.0 40 56.9MQA-!" 5.0 8.0 31 22.4MQA-"" 5.0 8.0 31 100.0Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D Channel Il: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD

HHK 41 complete pipe ring to channel connection part




Pre-assembled 90° angle

Features Pre-assembled for rapid installation Reliable keying action High strength

Technical dataTightening torque: 40 NmMaterial thickness: 3 mmBolt: M10 material 8.8 as per DIN/ISO 898Width across flats: 17 mm

Weight each Packaging ) Ordering Item no. (g) contents (pcs) designation

90° angle 200 20 MQW-Q2 00369655 Press and turn. Tighten.

1 2

Channel washerMaterial: S 235 JR as per DIN EN 10025GalvanisedThread Weight each Packaging Ordering Item no. (g) contents (pcs) designation

M 8 92 20 MQZ-L9 00369678M10 88 20 MQZ-L11 00369679M12 84 20 MQZ-L13 00369680M16 80 20 MQZ-L17 00369681

IBMB no. 3829/5270

All channel washers firestop tested

90° angle

Weight each Packaging Ordering Item no. (g) contents (pcs) designation

Angle, 4 hole, 90° 220 10 MQW-4 00369658Angle, 8 hole, 90° 420 10 MQW-8/90° 00369659Angle, 3 hole, 90° 160 20 MQW-3 00369656Angle, 2 hole, 90° 160 10 MQW-P2 00369661


45º angle


Angle, 8 hole, 45° 410 10 MQW-8/45° 369660Angle, 3 hole, 45° 155 20 MQW-3/45° 369657Angle, 2 hole, 45°, inner 354 10 MQW-2/45° 369662

(double bolted A )

A

Frec 6.0 kN

(double bolted A )

A

Compression: F rec 7.5 kNTension: Frec 6.0 kN


Page Header

8




Angle Bracket


Angle bracket, one brace 460 10 MQW-S/1 00369664Angle bracket, two braces 1180 10 MQW-S/2 00369665

VdS G 4960058

Angle bracket with VdS approval

VdS

Available in hot dipped galvanised & stainless steel

135º angle


Angle, 3 hole, 135° 210 10 MQW-3/135° 369663

(double bolted A )

A

Compression: F rec 7.5 kNTension: Frec 6.0 kN


Base material connector 45ºFor Weight each Packaging Ordering Item no. channel (g) contents (pcs) designation

MQ-21, MQ-31, MQ-41, MQ-41/3 350 10 MQP-45° 369649 105

4241

14

45

Longitudinal channel connector


Channel connector, 12 hole 555 10 MQV-12 00369643Channel connector, 4 hole, flat 188 10 MQV-P4 00369644

Connector, two dimensional


Connector, double, two dimensional 438 10 MQV-2/2D 00369638Connector, triple, two dimensional 615 10 MQV-3/2D 00369640

Connector, three dimensional


Connector, triple, three dimensional 451 10 MQV-3/3D 00369641Connector, quadruple, three dimensional 770 10 MQV-4/3D 00369642

Connector, flat


Channel connector, 4 hole, flat T 196 10 MQV-T 00369645





Channel baseSuitable for Weight each Packaging Ordering Item no. channel (g) contents designation (pcs)

MQ-21–MQ-72 1150 12 MQP-21-72 00369651MQ-41D 1880 8 MQP-82 00369652MQ-52-72D, MQ-124X D 2730 6 MQP-124 00369653

Pivot baseSuitable for Weight each Packaging Ordering Item no. channel (g) contents (pcs) designation

MQ-21, MQ-31, MQ-41, MQ-41/3 1055 10 MQP-G 00369654

Frec Bolt Pushbutton Tightening torque, Item (kN) MD (Nm)

MQP-G 9.0 Double MQN 40

Frec Bolt Pushbutton Tightening torque, Item (kN) (A) MD (Nm)

MQP-21-72 9.0 Double MQN 40MQP-82 12.6 Quadruple MQN 40MQP-124 12.6 Quadruple MQN 40

Frec Channel Bolt Pushbutton Tightening torque, Item (kN) (B) (A) MD (Nm)

MQV-2/2D-14 7.8 MQ-41 Double MQN 40 8.4 MQ-21D Quadruple MQN 40

Base material connectorSuitable for Weight each Packaging Ordering Item no. channel (g) contents (pcs) designation

MQ-41, MQ-41/3, MQ-21D 438 10 MQV-2/2D-14 00369639MQ-21, MQ-31, MQ-41, MQ-41/3 110 20 MQP-1/1 00369646

215

59

20x13.5

120

44

4

129

M1290

180

a

Frec (1)

Frec (2)

Item Frec (1) (kN) Bolt Push- Tightening torque MQN Tightening torque M12 button MD (Nm) clamping bolts MD (Nm)

MQP-FG 8 kN Double MQN 40 80

0.00

0.50

1,00

1.50

2.00

2.50

0 50 100 150 200 250 300 350 400Distance to the pivot point: a [mm]

Load F rec (2) [k N]

Adjustable pivot base MQP-FGSuitable for Weight each Packaging Ordering Item no.channel (g) contents (pcs) designation

MQ-21, MQ-31, MQ-41, MQ-41/3, MQ-21D 2070 4 MQP-FG 284240


Page Header

8




U-shapedSuitable for Weight each Packaging Ordering Item no. channel (g) contents (pcs) designation

MQ-41, MQ-41/3, MQ-21D 243 10 MQB-41 00369668MQ-52 340 10 MQB-52 00369669MQ-41D, MQ-41, MQ-41/3, MQ-21D 340 10 MQB-82 00369671MQ-52-72D, MQ-124X D 553 10 MQB-124 00369672

Installation washerMaterial: S 235 JR as per DIN EN 10025Galvanised

Hole diameter Weight each Packaging Ordering Item no. (mm) (g) contents (pcs) designation

10.5 30 40 MQZ-U 00369692

Channel tieFor accurate user-assembled double channelsMaterial: S235JR as per DIN EN 10025 Galvanised

Item Connection Width across Weight each Packaging Ordering Item no. thread flats (mm) (g) contents (pcs) designation

Locking device M10 13 mm AF 2.5 10 MQZ-SS 00369691 Magnetic wrench 13 mm AF 1 MQZ-SVS 00369693

Rec. tensile load, Rec. shear load, Tightening torque, Item Zrec (kN) Qrec (kN) MD (Nm)

MQZ-SS 3.0 5.0 20

Channel end capMade of polypropylene (PP), suitable for all installation channelsSuitable Weight each Packaging Ordering Item no.for channel (g) contents (pcs) designation

MQ-21, MQ-21D 2 50 MQZ-E21 00370598MQ-31 2 50 MQZ-E31 00369686MQ-41, MQ-41/3, MQ-41D 2 50 MQZ-E41 00369685

For rubber inlay for MQ Channel see page 321


Beam clampsSuitable for Weight each Packaging Ordering Item no. channel (g) contents (pcs) designation

MQ-21, MQ-31, MQ-41, MQ-21D 500 10 MQT-21-41 369675MQ-41, MQ-41/3, MQ-52, MQ-72, MQ-41D 650 10 MQT-41-82 369676MQ-41D, MQ-52-72D, MQ-124X D 860 10 MQT-82-124 369677

M8

560

95

92

M10

6

90 140

92

M12

8

85

178

92

Tightening torque, Max. rec. load Beam clamp MD (Nm) (kN)

MQT-21-41 10 3.0MQT-41-82 20 4.5MQT-82-124 30 5.0Always use beam clamps in pairs. Channel loading values must be allowed for.





MQ-41 455g 1 MQT-C21-F 00304193 MQ-21, 41, 52, 72 170g 1 MQT-C22-F 00304194MQ-21, 41, 260g 1 MQT-C23-F 00304195


MAB-9 12 MAB-9 00375956 MAB-11 12 MAB-11 00375957MAB-13 12 MAB-13 00375958

Tightening torque, Max. rec. load Beam clamp MD (Nm) (kN)

MQT-21-41 10 3.0MQT-41-82 20 4.5MQT-82-124 30 5.0Always use beam clamps in pairs. Channel loading values must be allowed for.

Size Approval Dimensions [mm] Weight Packaging Outside packaging Ordering Item no. T U W1 W2 X each (g) contents (pcs) contents (pcs) designation M8 VdS 53 58 17 55 27 266 20 40 MQT-G M8 284238M10 VdS / FM 53 58 17 55 27 266 20 40 MQT-G M10 284239

Swivel beam clamp MQT-Ggalvanized, 13 µm

Features Installation on steel beams without drilling or welding, also on

inclined steel beams.No bending of threaded rods.The clamp set fits all standard T-beams

(max. clamping thickness 17 mm).

Item Frec (kN) Frec (kN) Thightening torque ( 25°) (> 25°) MD (Nm)

MQT-G M8: 2.5 1.5 18MQT-G M10: 2.5 1.5 18Loading: In accordance with the VdS and FM specifications

VdS FMFactory Mutual

For VdS-approved instal lation see www.hilti.com/ vds-installation

W2

Frec

X

G

W1

MD

U

T

Technical dataVdS: Above pipe size DN 65, retaining straps are

required!VdS: For the applications 1 and 4 retaining straps

are required!

VdS G 402 1003



Page Header

8





25°! 25°! 25°! Max. 45Max. 45

90

Non-VdS and FM approved applicationsVdS and FM approved applications

Installation instruction: retaining strapInstallation instruction: swivel beam clamp

Retaining strap for swivel beam clamp MQT-G

1 2 3 5 6 74

For swivel beam clamp Dimensions [mm] Packaging Ordering Item no. Length Width Thickness contents (pcs) designation MQT-G M8, MQT-G M10 305 40 3 10 MQT-S 284863

MQZ-RI rubber inlay for MQ channel For the acoustic insulation of air duct supports.

Uses Ideal acoustic insulation for MQ channels with a width of 41 mm Insulating layer between M8 and M10 threaded rods and the ventilation duct

100

208

41For channel For threaded Weight each Package Ordering designation Item no.[mm] rod [g] contents

System MQ M8/M10 10400 1 * MQZ-RI 20 m 386546System MQ M8/M10 59 100 MQZ-RI 10 cm 386547

* 1 roll of 20 m

Acousticinsulation

inspectedDIN 4109





3D modular system

Description Weight each Packaging contents Ordering Item no. (g) (pcs) designation

Basic unit 206 20 MQ3D-B 369694/590° angle 212 20 MQ3D-W90° 369695/245° angle 153 16 MQ3D-W45° 369696/0Brace 95 20 MQ3D-A 369697/8

Example of application (push button not illustrated)

NoteThe preassembled fastening screw must be replaced with a longer 8.8 grade M10 screw when the connect-ing parts (MQ3D-W90°, MQ3D-W45°, MQ3D-A) are fitted without other parts from the 3D system. The mini-mum thread engagement lengths must be observed.

– PLEASE ASK FOR DELIVERY DETAILS.For further information visit the Hilti website - www.hilti.co.uk/install or www.hilti.ie

Page Header

8




MQP-E elevator wall base

Applications Elevator door fastening support

Advantages Easy, secure attachment of installation channels with pushbuttons Quick installation of the wall base on any base material Elongated holes for flexible positioning to avoid rebar hits Various channel lengths for great versatility Flexible position of the wall base

Ordering designation Package contents Item no.MQP-E elevator wall base 4 387735

Technical dataMaterial: S235JR according to DIN EN 10025Galvanizing: galvanized, Fe/Zn 13B as per DIN 50 961

189

205

90

Type of load recommended load F recommended load F for L = 1642 mm for L = 1442 mm

0.90 kN 1.18 kN

0.52 kN 0.69 kN

0.39 kN 0.49 kN

0.88 kN 1.47 kN*

1.40 kN/m 1.85 kN/m

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

1442 mm (max. ; case 1)1642 mm (max. ; case 2)

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

Loading scenarioChannel MQ-21D

Channel position

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

* limitation by strain; all other loads limited by deflection L/200

Type of load recommended load F recommended load F for L = 1642 mm for L = 1442 mm

1.61 kN 2.10 kN

0.94 kN 1.23 kN

0.67 kN 0.88 kN

1.55 kN 2.64 kN

1.57 kN/m 2.33 kN/m

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

Loading scenarioChannel MQ-21D

Channel position

F

F F

FF F

F F

F

1/3 1/3 1/3

F

1.05 m

q

L

L

limitation by deflection L/200


529 9

Construction Chemicals

Firestop sleeve

Applications

OrderingOrder description Package Contents Item number

0201971702019718

Technical data

Base materialsApprovalsApplication tem-perature range

5°C - 50°C 5°C - 50°C

-perature

160 °C 160 °C

Intumescent Yes Yes

thickness

classRecommended

Re-penetration Yes Yes

Advantages

EN1366-3

9

518


9

CP 611 A

Applications

OrderingOrder description Package Contents Item numberFirestop sealant CP 611A 1 PC 00220351

1 PC 00055205

Technical dataCP 611 A

Fire ratingBase materials

Chemical basis

Application temperature range 5°C - 40°CAcoustics performance

ColourSkin forming time (at

Air leakage

Advantages

k/cfs or www.hilti.ie

EN1366-3

9

522


9

Applications

pipes


1 PC 00340785

Technical data


Application temperature range 5°C - 40°CColourYield

Consumption guideseal

-

Advantages

k/cfs or www.hilti.ie

523 9


Applications


1 PC 00340646

Technical data


Application temperature range 5°C - 40°CColourAcoustic performance

--

Consumption guide

Advantages

For installation instructions visit www.hilti.co.uk or www.hilti.ie

527 9


Firestop single wrap

Applications


2 PC 002860762 PC 002860772 PC 002860792 PC 002860802 PC 002860812 PC 002860821 PC 00286083

Technical data

ApprovalsFire rating

Base materials

Colour - -

Dimensions (ap- -

Temperature resist-anceIntumescent activa-tion

Advantages

EN1366-3

Anchor Systems

373www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7 Anchor Systems 374

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7 Anchor Systems

ApplicationsTechnical data

HKDZinc plated

Base materials Concrete

The internally threaded anchor for everday use.

Advantages Ideal for repetitive fastening applications with threaded rods of

the surface irrespective of hole depth No damage to the thread when tapping in and expanding ”Intelligent” stepped expansion piece adapts to suit materials of different hardness Visual check for correct setting Shallow drilling depth for M6, M8, M10 and M12 (25mm)

!

!

!"#$%&'& !"%%"()"#*%&()('+#$&

,-%".&+#/&$0#)$+12..%"3+1

!,$"#4"%5)'6

7)1')*+#$0"%*8&()9#

("4':+%&!Internal thread size

Drill bit diameter

Hole depth Anchor length Standard embedment depth

Order designation Sales Quantity

Item Number HKD

Item Number Stainless Steel HKD-SR

M6 8 mm 27 mm 25 mm 25 mm Flush anchor HKD M6x25 100 pc 00376894 00247951M8 10 mm 27 mm 25 mm 25 mm Flush anchor HKD M8x25 100 pc 00376957 -M8 10 mm 33 mm 30 mm 30 mm Flush anchor HKD M8x30 100 pc 00376959 00247952M8 10 mm 44 mm 40 mm 40 mm Flush anchor HKD M8x40 50 pc 00376961 -M10 12 mm 27 mm 25 mm 25 mm Flush anchor HKD M10x25 100 pc 00376963 -M10 12 mm 33 mm 30 mm 30 mm Flush anchor HKD M10x30 100 pc 00376965 -M10 12 mm 44 mm 40 mm 40 mm Flush anchor HKD M10x40 50 pc 00376967 00247953M12 15 mm 27 mm 25 mm 25 mm Flush anchor HKD M12x25 100 pc 00378431 -M12 15 mm 55 mm 50 mm 50 mm Flush anchor HKD M12x50 50 pc 00378544 00247954M16 20 mm 70 mm 65 mm 65 mm Flush anchor HKD M16x65 25 pc 00382941 00247955M20 25 mm 85 mm 80 mm 80 mm Flush anchor HKD M20x80 25 pc 00382955 00247956

Page Header

7

Anchor Systems

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7 Anchor Systems 374


For further Technical Information refer to the Hilti Fastening Technology Manual or go to the Hilti website.

HKD

HKD-D

OrderingInternal thread size

Drill bit diameter



Item Number

M12 16 mm 55 mm 50 mm 50 mm Flush anchor HKD-D M12x50 50 pc 00385459M12 16 mm 55 mm 50 mm 50 mm Flush anchor HKD-D M12x50 bucket 250 pc 00385460

OrderingInternal thread size

Drill bit diameter



Item Number

M6 8 mm 27 mm 25 mm 25 mm Flush anchor HKD M6x25 bucket 1000 pc 00376956M8 10 mm 27 mm 25 mm 25 mm Flush anchor HKD M8x25 bucket 500 pc 00376958M8 10 mm 33 mm 30 mm 30 mm Flush anchor HKD M8x30 bucket 500 pc 00376960M8 10 mm 44 mm 40 mm 40 mm Flush anchor HKD M8x40 bucket 500 pc 00376962M10 12 mm 27 mm 25 mm 25 mm Flush anchor HKD M10x25 bucket 500 pc 00376964M10 12 mm 33 mm 30 mm 30 mm Flush anchor HKD M10x30 bucket 500 pc 00376966M10 12 mm 44 mm 40 mm 40 mm Flush anchor HKD M10x40 bucket 500 pc 00378430M12 15 mm 27 mm 25 mm 25 mm Flush anchor HKD M12x25 bucket 250 pc 00378432M12 15 mm 55 mm 50 mm 50 mm Flush anchor HKD M12x50 bucket 250 pc 00378553

Page Header

7

Anchor Systems

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7 Anchor Systems 376



TE-CX / HKD / stop drill bit and setting equipment

HDK/V fixing Stop drill bits Setting tool (current ‒ manual) Setting tool (current ‒ TE)

Description Item No. Description Item No. Description Item No. Description

HKD/V M6 x 25 433771 TE-CX HKD/B 8/27 243738 HSD-G M6 x 25 243746 HSD-M M6 x 25

HKD M8 x 25 433772 TE-CX HKD/B 10/27

243740 HSD-G M8 5/16¨ x 30 243748 HSD-M M8 5/16¨ x 30HKD/V M8 x 30 433773 TE-CX HKD/B 10/33

HKD M8 x 40 433774 TE-CX HKD/B 10/44 243741 HSD-G M8 5/16¨ x 40 243749 HSD-M M8 5/16¨ x 40

HKD M10 x 25 433775 TE-CX HKD/B 12/27

230935 HSD-G M10 3/8¨ x 30 243750 HSD-M M 10 3/8¨ x 30HKD/V M10 x 30 433776 TE-CX HKD/B 12/33

HKD/V M10 x 40 433777 TE-CX HKD/B 12/44 243742 HSD-G M10 3/8¨ x 40 243751 HSD-M M10 3/8¨ x 40

HKD M12 x 25 433778 TE-CX HKD/B 15/27 401552 HSD-G M12 ½¨ x 25 401553 HSD-M M12 ½¨ x 25

HKD/V M12 x 50 433779 TE-CX HKD/B 15/55 243743 HSD-G M12 x 50 243752 HSD-M M12 x 50

HKD M16 x 65 - - 243744 HSD-G M16 x 65 243753 HSD-M M16 x 65

HKD M20 x 80 - - 243745 HSD-G M20 x 80 243754 HSD-M M20 x 80

Anchor SystemsAnchor Systems

365www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7 366

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7

HSL-3 Heavy-Duty Expansion AnchorHSL-3 is the most reliable heavy-duty expansion anchor for safety relevant applications.

Base materials Concrete, cracked concrete

Hard natural stone

Applications Fastening heavy loads, e.g. from columns, machines, apparatus etc., also in cracked concrete Dynamic conditions, e.g. with vibratory or windy conditions Seismic areas Any heavy-duty application where extensive approvals coverage is required

Application areasNuclear power projects Power generationTelecom TunnelingHeavy industrial StadiumsInfrastructure Roof/building structures

MaterialSteel strength 8.8 with rolled thread, zinc plating at least 5 microns thickA4 stainless steel (material 1.4401 / AISI 316)

Main features

Black plastic section – no turning in hole during setting – collapses for flush baseplate-to-surface fit

Choice of four head types (see next page for detail) HSL-3-B, pictured requires no torque wrench for setting. The red cap shears off with correct torque, revealing a tamper-proof green seal

Embedment depth mark for easy setting Extensive range of approvals and technical back-up

!

!"#$%&'& (&#)*+&,"#&

-*%&%&)*)'.#$& /0"$1

23%"4&.#(&$0#*$.+544%"6.+

!2$"#7"%8*'9

:*+'*;.#$0"%;<&)*=#

)"7'>.%&!

Anchor Systems

7

Anchor Systems

www.hilti.co.uk ¦ 0800 886 100www.hilti.ie ¦ 1850 287 387 7 366


HSL-3 heavy-duty anchorHole Anchor Hole Max. thickness Width across Box Ordering Item no. dia. length depth fastened flats contents designation do (mm) l (mm) h1 (mm) tfix (mm) SW (mm) (pcs)

12 98 80 20 13 40 HSL-3 M 8/20 0037177512 118 80 40 13 40 HSL-3 M 8/40 0037177615 110 90 20 17 20 HSL-3 M10/20 0037177815 130 90 40 17 20 HSL-3 M10/40 0037177918 131 105 25 19 20 HSL-3 M12/25 0037178118 156 105 50 19 10 HSL-3 M12/50 0037178224 153 125 25 24 10 HSL-3 M16/25 0037178424 178 125 50 24 10 HSL-3 M16/50 0037178528 183 155 30 30 6 HSL-3 M20/30 0037178728 213 155 60 30 6 HSL-3 M20/60 0037178832 205 180 30 36 4 HSL-3 M24/30 0037179032 235 180 60 36 4 HSL-3 M24/60 00371791

HSL-3-G heavy-duty anchor – stud version12 102 80 20 13 40 HSL-3-G M 8/20 0037179312 122 80 40 13 40 HSL-3-G M 8/40 0037179412 182 80 100 13 20 HSL-3-G M 8/100 0037182915 115 90 20 17 20 HSL-3-G M10/ 20 0037179615 135 90 40 17 20 HSL-3-G M10/ 40 0037179715 195 90 100 17 20 HSL-3-G M10/100 0037183018 139 105 25 19 20 HSL-3-G M12/ 25 0037179918 164 105 50 19 10 HSL-3-G M12/ 50 0037180018 214 105 100 19 10 HSL-3-G M12/100 0037183124 163 125 25 24 10 HSL-3-G M16/ 25 0037180224 188 125 50 24 10 HSL-3-G M16/ 50 0037180324 238 125 100 24 10 HSL-3-G M16/100 0037183228 190 155 30 30 6 HSL-3-G M20/ 30 0037180528 220 155 60 30 6 HSL-3-G M20/ 60 0037180628 260 155 100 30 6 HSL-3-G M20/100 00371833

HSL-3-B heavy-duty anchor with torque bolt18 137 105 25 24 20 HSL-3-B M12/25 0037180818 162 105 50 24 10 HSL-3-B M12/50 0037180924 159 125 25 30 10 HSL-3-B M16/25 0037181124 184 125 50 30 10 HSL-3-B M16/50 0037181228 189 155 30 36 6 HSL-3-B M20/30 0037181428 219 155 60 36 6 HSL-3-B M20/60 0037181532 211 180 30 41 4 HSL-3-B M24/30 0037181732 241 180 60 41 4 HSL-3-B M24/60 00371818

HSLG-R Version: threaded rod stainless steel A4Hole dia., Anchor length, Hole depth, Max. fastenable Width across flats Package do l h1 thickness, tfix AF contents(mm) (mm) (mm) (mm) (mm) Ordering designation Item no.

12 95 80 20 13 40 HSLG-R M 8/20 0006792015 107 90 20 17 20 HSLG-R M 10/20 0006792218 120 100 25 19 20 HSLG-R M 12/25 0006792424 148 125 25 24 10 HSLG-R M 16/25 0006792628 183 155 30 30 6 HSLG-R M 20/30 00067928

HSL-3-SK Countersunk headHole dia., Anchor length, Hole depth, Max. fastenable Width across flats Package do l h1 thickness, tfix AF contents(mm) (mm) (mm) (mm) (mm) Ordering designation Item no.

12 91 80 20 – 40 HSL-3-SK M 8/20 0037182615 102 90 20 – 20 HSL-3-SK M 10/20 0037182718 121 105 25 – 20 HSL-3-SK M 12/25 00371828


7

Anchor Systems



HIT-HY 150 MAX injectable adhesive mortar

Maximised strength, minimised cost

Applications Structural steel connections, e.g. steel columns, beams Secondary steel structures, e.g. staircases, platforms Railings, safety barriers Structural connections using post-installed rebar Structural renovation and upgrades using post-installed rebar Substitution of incorrectly positioned or missing rebar Suitable for cracked concrete

Advantages One of the strongest fast-curing injectable adhesive mortars on the

market, with a full range of approvals available Faster curing boosts productivity – design loads are achieved after

only 30 minutes at 20°C No expansion forces in concrete – allows use close to edges and

where anchors are closely spaced Embedment depth can be varied between 4 and 20 times rod diameter

depending on required load value – ensuring optimum holding power but saving time and money

Post-installed rebar works like cast-in, in accordance with the ETA approval for rebar

Wider working temperature range, from -10°C to +40°C Contains no hazardous chemicals and meets all health and safety

requirements for trouble-free use, storage and transportation New Hilti PROFIS software for quick and reliable design

HIT-HY 150 MAX injectable adhesive mortar

Ordering designation Mortar Package Mixer Mixer Item no. content (ml) contents extension

HIT-HY 150 MAX 330/2 298119 HIT-HY 150 MAX 330/1P 330 20 1 0 407894HIT-HY 150 MAX 500/2 500 20 2 0 298220 HIT-HY 150 MAX 1400 298294Kit of 40x500ml + MD2500 manual dispencer kit 218414 Kit of 80x500ml + ED3500 battery dispencer kit 224193

HIT-RE M mixer

Ordering designation Package Item no. contents

HIT-RE M mixer 1 33711130 cm mixer extension 1 088923

Working and curing time

Base material temperature Working time, Tgel Curing time, Tcure

(°C) (min) (min) -10 180 720 -5 40 240 0 20 120 5 8 60 20 5 30 30 3 30 40 2 30For detailed information, please refer to the installation instructions provided with the product.

!"#$%&'&()*++,&-.&,

-/0'*#$&*#-,01*$/#.,

2*%/*3+&&)3&-)&#'

-&1'45/%&

%&0/0'*#$&!"%%"0/"#,%&0/0'*#$&

6/.4$"%%"0/"#,%&0/0'*#$&

78%"1&*#9&$4#/$*+:11%";*+

!7$"#<"%)/'=

6/+'/,*#$4"%,-&0/.#

0"<'>*%&


Page HeaderAnchor Systems



HIT-V threaded anchor rod A universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth.

Base material

Applications

Advantages: Flexibility: diameter allows shallow fastenings in thin concrete slaps or walls

Productivity: Use of optimal rod length and diameter saves time and money per fastening application

Universality:

Approvals:

rods Head marking:

HIT-HY 150 MAX ETA-08 / 0352HIT-RE 500 ETA-04 / 0027

HIT-V-HCR threaded anchor rod A universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth. High corrosion resistance version (complete with nut and washer), 1.4529 grade steel.

HIT-V-F threaded anchor rod

Universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth. Hot dip-galvanized version (complete with nut and washer), 5.8 grade steel.

Purchased to order.

HIT-V threaded anchor rod

A universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth. (complete with nut and washer) Grade 5.8 zinc plate 5 um.Max. fastenable height + Typical embed- Rod length Drill bit dia. Packaging Ordering designation Item no.anchorage depth* ment depth (mm) (mm) contents (pcs)

60 60 75 8 20 HIT-V M 6 x 75 387144 90 60 105 8 20 HIT-V M 6 x 105 387145 65 80 80 10 20 HIT-V M 8 x 80 387054 95 80 110 10 20 HIT-V M 8 x 110 387055135 80 150 10 20 HIT-V M 8 x 150** 387056 78 90 95 12 10 HIT-V M10 x 95 387057 98 90 115 12 10 HIT-V M10 x 115 387146113 90 130 12 10 HIT-V M10 x 130 387058173 90 190 12 10 HIT-V M10 x 190** 387059 91 110 110 14 10 HIT-V M12 x 110 387060101 110 120 14 10 HIT-V M12 x 120 387147131 110 150 14 10 HIT-V M12 x 150 387061201 110 220 14 10 HIT-V M12 x 220** 387062261 110 280 14 10 HIT-V M12 x 280** 387063127 125 150 18 5 HIT-V M16 x 150 387064177 125 200 18 5 HIT-V M16 x 200 387065277 125 300 18 5 HIT-V M16 x 300 387066357 125 380 18 5 HIT-V M16 x 380** 387067153 170 180 24 10 HIT-V M20 x 180 387068233 170 260 24 10 HIT-V M20 x 260 387069353 170 380 24 10 HIT-V M20 x 380 387070453 170 480 24 10 HIT-V M20 x 480 387071268 210 300 28 5 HIT-V M24 x 300 387072418 210 450 28 5 HIT-V M24 x 450 387073 * Depending on the type of HIT injectable mortar used ** 8.8 grade steel

A4-70 grade steel.

Ordering designation Item no.

HIT-V-R M 8 x 80 387074HIT-V-R M 8 x 110 387075HIT-V-R M 8 x 150 387076HIT-V-R M10 x 95 387077HIT-V-R M10 x 115 387148HIT-V-R M10 x 130 387078HIT-V-R M10 x 190 387079HIT-V-R M12 x 110 387080HIT-V-R M12 x 120 387149HIT-V-R M12 x 150 387081HIT-V-R M12 x 220 387082HIT-V-R M12 x 280 387083HIT-V-R M16 x 150 387084HIT-V-R M16 x 200 387085HIT-V-R M16 x 300 387086HIT-V-R M16 x 380 387087HIT-V-R M20 x 180 387150HIT-V-R M20 x 260 387088HIT-V-R M20 x 380 387089HIT-V-R M20 x 480 387151HIT-V-R M24 x 300 387152HIT-V-R M24 x 450 387153

357

7

Anchor Systems



Anchor rods and sockets

HIS-N internally threaded socket with cover cap

Steel zinc plated 5 microns thick Stainless steel A4 SS316 (material 1.4401)Connection Thread Sleeve Package Outer package Ordering designation Item no. Ordering designation Item no. thread length, length, contents contents hs (mm) l (mm)

M 8 8–20 90 10 200 HIS-N M 8 x 90 00258015 HIS-RN M 8 x 90 00258024M10 10–25 110 10 200 HIS-N M10 x 110 00258016 HIS-RN M10 x 110 00258025M12 12–30 125 5 100 HIS-N M12 x 125 00258017 HIS-RN M12 x 125 00258026 M16 16–40 170 5 50 HIS-N M16 x 170 00258018 HIS-RN M16 x 170 00258027 HIS-N H20 x 205 00258019 HIS-RN M20 x 205 00258028

A4316

HAS-E anchor rod, complete with hexagon nut and washer, with cone head for use with HVU capsules.

Connection Fastenable Embedment Package Overall Tightening torque Steel zinc plated5 microns thick (grade 5.8 / ISO 898 T1) Stainless steel A4-70 (material 1.4401) thread thickness (mm) depth (mm) contents length (mm) Tinst.(Nm) Ordering designation Item no. Ordering designation Item no.

M8 14 80 20 110 15 HAS-E M8 80/14 00332219 HAS-E-R M8 80/14 00333119M8 15 80 10 150 15 HAS-E M8 80/54 00333099 HAS-E-R M8 80/54 00333120M8 114 80 10 240 15 – – HAS-E-R M10 80/114 00333121M10 21 90 20 130 30 HAS-E M10 90/21 00332220 HAS-E-R M10 90/21 00333122M10 61 90 10 170 30 HAS-E M10 90/61 00333100 HAS-E-R M10 90/61 00333123M10 81 90 10 190 30 HAS-E M10 90/81 00333101 HAS-E-R M10 90/81 00333124M10 88 90 10 220 30 – – HAS-E-R M10 90/88 00333125M12 28 110 20 160 50 HAS-E M12 110/28 00332221 HAS-E-R M12 110/28 00333126M12 88 110 10 220 50 HAS-E M12 110/88 00333102 HAS-E-R M12 110/88 00333127M12 128 110 10 260 50 HAS-E M12 110/128 00333103 HAS-E-R M12 110/128 00333128M12 168 110 10 300 50 HAS-E M12 110/168 00333104 HAS-E-R M12 110/168 00333129M16 20 125 10 170 100 HAS-E M16 125/20 00333105 HAS-E-R M16 125/20 00333130M16 38 125 20 190 100 HAS-E M16 125/38 00332222 HAS-E-R M16 125/38 00333131M16 108 125 10 260 100 HAS-E M16 125/108 00333106 HAS-E-R M16 125/108 00333132M16 148 125 10 300 100 HAS-E M16 125/148 00333107 HAS-E-R M16 125/148 00333133M16 198 125 10 350 100 HAS-E M16 125/198 00333108 HAS-E-R M16 125/198 00333134M16 348 125 10 500 100 HAS-E M16 80/348 00333109 – – M20 48 170 10 240 160 HAS-E M20 170/48 00332223 HAS-E-R M20 170/48 00333135M20 68 170 10 260 160 HAS-E M20 170/68 00333110 – – M20 108 170 10 300 160 HAS-E M20 170/108 00333111 HAS-E-R M20 170/108 00333136M20 158 170 10 350 160 HAS-E M20 170/158 00333112 – – M20 208 170 10 400 160 HAS-E M20 170/208 00333113 – –M24 54 210 10 290 240 HAS-E M24 210/54 00332224 HAS-E-R M24 210/54 00333137 M27 60 240 4 340 270 HAS-E M27 240/60 * 00333114 HAS-E-R M27 240/60 * 00333138M30 70 270 4 380 300 HAS-E M30 270/70 * 00333115 HAS-E-R M30 270/70 * 00333139 M33 80 300 4 420 1200 HAS-E M33 300/80 * 00333116 HAS-E-R M33 300/80 * 00333140M36 90 330 4 460 1500 HAS-E M36 330/90 * 00333117 HAS-E-R M36 330/90 * 00333141 M39 100 360 4 500 1800 HAS-E M39 360/100 * 00333118 HAS-E-R M39 360/100 * 00333142* (Grade 8.8 / ISO 898 T1)

A4316


!"#$%&'()*+,-'".',#/0*"',1,&.'*

!"#$%&'()$*(+,(-.$(+/0+

)*+,-'".',#/(2#3 45678,'9* 0!(:44;(< !"*--%"*(=>*"',/+(?/'%@*-&*/'(A*.9./'

A'.'%- ;%'B#",-*$(C#"(D-*

A%E*"-*$*-(!"#$%&'?F !"#

A%E*"-*$*$(GH(!"#$%&'?F !"#

F.'*(;%'B#",-*$(1#"(D-* 64(;%+(I644

!",@."H(D-* $%&'()*+,-&.+/01)2*34+.5+2*1.+&6&2*178%1'%8*+5*)291')'+1&2/15&-6+1'+2+*%&*)82.:1

;$$,',#/.9(?/1#JK*HL#"$- ;().1'%8/35*1).1584'6)&2*1<)*(1*(+1%+=3)%+4+2*.1871>?1@*&2/&%/1A,BCD1#E1FG)%+1@&7+*H1I+%78%4&25+1871J&*+%)&6.F1&2/15&21-+1)2.*&66+/1)21-+68<19%832/1685&*)82.:1J&237&5*3%+%K1L)6*)1M$*:1N%)*&)2O1>)4)*+/01A1;%&778%/1P(&%71Q8&/01;%&778%/1I&%R01J&25(+.*+%01JAS1ANT:1;+6K1BCBB1CCU1ABB

09.--,1,&.',#/(M,*"."&BH G)%+1@H.*+4.

N./%1.&'%"*$(GH L)6*)1M$*:1N%)*&)2O1>)4)*+/1

)*O%,"*@*/'-

0#/$,',#/-

=P,$*/&*

!"#$% !"#&'(")"*+ ,+-+&. /('-0123("42(5.3+235'.60-78

%".4('6+'2* 9'*:"53/23!"#$%

;<3=>>?3."-0-*+3@2().36-(+32@3-3@'("36(2+"4+'2*3.7.+")3-*53-.3.&4AB3.A2&053C"34A"4:"53C73-39D3@'("3"*E'*""(3&62*3'*.+-00-+'2*B3'*3-442(5-*4"3F'+A392*52*3D*5"(E(2&*536(24"5&(".8

$*.+-003-442(5'*E3+23+A"3)-*&@-4+&("(G.3'*.+(&4+'2*.8

HI'5"*4"/"J+ HI'5"*4"/76" K'0"1-)" 9'*:"53/23!"#$%

<(25&4+35-+-3.A""+ D."(3L&'5" M'0+'3;<=>>-35-+-3.A""+865@

N-+"('-03.-@"+735-+-3.A""+ D."(3L&'5" M'0+'3;<=>>-3,-@"+735-+-3.A""+865@

9')'+'*E3OJ7E"*3$*5"JP3Q,3H13$,O3RSTUVW /".+3("62(+ <%K3X>TSYTZV%24ZUZT>[$,O3RSTU3OJ7E"*3!"62(+365@3>865@

,)2:"3")'..'2*P3Q,3=TSY3Q8S8> /".+3("62(+ 9>YS>S3QS3>3.)2:"865@

/2J'43@&)"3")'..'2*P31K3\3[ZV>ZZ3]$*5'4-+'I"^ /".+3("62(+ 65@3X>T[Y=TV/QZU>Z>=_31K3\3[ZV>ZZ3'*5'430"++"(3>865@

/2J'43@&)"3")'..'2*P31H,3[>Y /".+3("62(+ 9>YS>Y31H,[>Y865@

,)2:"`/2J'4'+7P3K?!3WS8TSY /".+3("62(+ K?!3X?!3/".+.865@

9<;Q3;"(+'@'4-+" /".+3("62(+ K,ZWUVZW3V 9<;Q3?66(2I-0.3;"(+'@'4-+'2*3]Z=VZUVZ=^865@

!"#"$%&'%(")%*+&"%,,,-./012$-3'-/4%&'%35"34%3/$$"6&%*&1&/*7%8',6.'18%1&&1359"6&*%168%#'$%8"&1+.*%'#%'&5"$%2$'8/3&*-

:;<=!%=>%?=@A=@

!"#$%&%'(%&

)*+,&+),&)-../0++1112345"/627'248+!"#$9+:/$6".;'<"3+=$6.;(;7".$>'!6;<.2"9/?

!"#$%&'()*+,-'".',#/0*"',1,&.'*

!"#$%&'()$*(+,(-.$(+/0+

)*+,-'".',#/(2#3 445

6,'7* 8,"*-'#9(0#:9#%/$

;'.'%- <%'=#",-*$(8#"(>-*

;%9*"-*$*-(!"#$%&'?@ !"#

;%9*"-*$*$(AB(!"#$%&'?@ !"#

@.'*(<%'=#",-*$(1#"(>-* CD(<%+(4EEF

!",:."B(>-* $%&'(&)*+,-+.-&-.*/01)+2-3+/)&/-.+/-4+32'*&,40-5*)6-)60-7*/0-8&.0)9-:0/.+/3&,40-/0;(*/030,)1-+.-)60-<=<-1)&,>&/>-?@ABCD

<$$,',#/.7(?/1#GH*BI#"$- EFG-H&,(.&4)(/0/I-J*')*-<*3*)0>-?-F/&..+/>-K6&/.-L+&>-F/&..+/>-:&/M-H&,4601)0/-H?N-?OPD-<=-8)&,>&/>-?@ABC-#?-7*/0-8&.0)9-:0/.+/3&,40-+.-H&)0/*&'1

07.--,1,&.',#/(J,*"."&=B 7*/0-891)031

K./%1.&'%"*$(AB J*')*-QR)D-O/*)&*,S-<*3*)0>-

)*L%,"*:*/'-

0#/$,',#/-

MN,$*/&*

!"#$% !"#&'(")"*+ ,+-+&. /('-0

1123'(".+45674(+-(684(6)"9'&):0-(;"645"*'*;.<6/='.65(49&>+6'.684(6*4*?.+(&>+&(-06-550'>-+'4*.@6-0+=4&;=69('00-A0"684(65-..'*;6."(B'>".6-*9604-96A"-('*;6+460';=+6844+6+(-88'><$C,/DEED/$FC6!GH,I6J0"-."6("8"(6+46)-*&8->+&("(.6;&'9"<6

,-+'.8'"9

%".>('5+'4* E'*K"96/46!"#$%C46(">4(9.6+469'.50-L<

GB'9"*>"/"M+ GB'9"*>"/L5" 3'0"C-)" E'*K"96/46!"#$%J(49&>+6$*84()-+'4* N."(6O&'9" P2Q6J(49&>+6$*84()-+'4*<598 112

$*.+-00-+'4*6$*.+(&>+'4*. N."(6O&'9" P2Q6$*.+-00-+'4*6$*.+(&>+'4*.<598 112

C4*?R4)A&.+'A'0'+L6/".+6!"54(+ /".+6("54(+ S,6TQP6J+6T6+".+6486P2Q<598 112

7-+"('-06,-8"+L6%-+-6,=""+ ,-8"+L6%-+-6:6$*84()-+'4* 7,%,684(6RJP2Q6P2U<598 112

7"+(4*"+6J(49&>+6D.."..)"*+6E"++"( R4*.&0+-+'4* ,,/?VU1V<598 112

!"#"$%&'%(")%*+&"%,,,-./012$-3'-/4%&'%35"34%3/$$"6&%*&1&/*7%8',6.'18%1&&1359"6&*%168%#'$%8"&1+.*%'#%'&5"$%2$'8/3&*-

:;<=!%=>%?=@A=@

!"#$%&%'(%&

)*+,&+),&)-../0++1112345"/627'248+!"#$9+:/$6".;'<"3+=$6.;(;7".$>'!6;<.2"9/?

!"#$%&'()*+,-'".',#/0*"',1,&.'*

!"#$%&'()$*(+,(-.$(+/0+

)*+,-'".',#/(2#3 445

6,'7* 8,"*-'#9(0#:9#%/$(; <'"%&'%".7

<'.'%- =%'>#",-*$(8#"(?-*

<%9*"-*$*-(!"#$%&'@A !"#

<%9*"-*$*$(BC(!"#$%&'@A !"#

A.'*(=%'>#",-*$(1#"(?-* DE(=%+(4FFG

!",:."C(?-* $%&'(&)*+,-+.-&-.*/01)+2-3+)&/-.+/-4+32'*&,40-5*)6-)60-7*/0-8&.0)9-:0/.+/3&,40-/0;(*/030,)1-+.-)60-<=<-1)&,>&/>-?@ABCD

=$$,',#/.7(@/1#HI*CJ#"$- E*')*-<*3*)0>-?-F/&..+/>-G6&/.-H+&>-F/&..+/>-:&/I-J&,4601)0/-J?K-?LMD-<=-8)&,>&/>-?@ABC-#?-7*/0-8&.0)9-:0/.+/3&,40-+.-J&)0/*&'1

07.--,1,&.',#/(K,*"."&>C 7*/0-891)031

L./%1.&'%"*$(BC E*')*-NO)D-L/*)&*,P-<*3*)0>-

)*M%,"*:*/'-

0#/$,',#/-

NO,$*/&*

!"#$% !"#&'(")"*+ ,+-+&. /('-0

1123'(".+45674+-(684(60-(9"645"*'*9.:6/;'.6'.6-6;'9;6.+("*9+;6.+(&<+&(-069(-="6(-5'=><&("68'("6(".'.+-*+6)4(+-(6?'+;6944=6+;"()-06-<4&.+'<6'*.&0-+'4*65(45"(+'".:6$@,/ABBA/$C@6!DE,F6G0"-."6("8"(6+46)-*&8-<+&("(.69&'=":6

,-+'.8'"=

%".<('5+'4* B'*H"=6/46!"#$%@46("<4(=.6+46='.50-I:

DJ'="*<"/"K+ DJ'="*<"/I5" 3'0"@-)" B'*H"=6/46!"#$%7-+"('-06,-8"+I6%-+-6,;""+ ,-8"+I6%-+-6L6$*84()-+'4* 7,%,684(6MGNOP6NOQ:5=8 112

@4*>M4)R&.+'R'0'+I6/".+ /".+6("54(+ NOQ6S,62PN6G+626*4*6<4)R&.+'R'0'+I6+".+:5=8 112

G(4=&<+6$*84()-+'4* T."(6U&'=" NOQ6G(4=&<+6$*84()-+'4*:5=8 112

7"+(4*"+6A55(4J-0 M4*.&0+-+'4* ,,6/VQ1V:5=8 112

!"#"$%&'%(")%*+&"%,,,-./012$-3'-/4%&'%35"34%3/$$"6&%*&1&/*7%8',6.'18%1&&1359"6&*%168%#'$%8"&1+.*%'#%'&5"$%2$'8/3&*-

:;<=!%=>%?=@A=@

!"#$%&%'(%&

)*+,&+),&)-../0++1112345"/627'248+!"#$9+:/$6".;'<"3+=$6.;(;7".$>'!6;<.2"9/?

!"#$%&'()*+,-'".',#/0*"',1,&.'*

!"#$%&'()$*(+,(-.$(+/0+

)*+,-'".',#/(2#3 4567

8,'9* 0!:;:(<,"*-'#=(!,=*(>".=

?'.'%- @%'A#",-*$(<#"(B-*

?%=*"-*$*-(!"#$%&'CD !"#

?%=*"-*$*$(EF(!"#$%&'CD !"#

D.'*(@%'A#",-*$(1#"(B-* 44(G./(6746

!",H."F(B-* $%&'()*+,,%-.(/&0,(1+&(%-)230*'4(-+-56+782)*%83'(,%,')(%-(70)+-&9:(6+-6&'*'(0-4(-+-56+782)*%83'()*''3(1&07'4(1%&'(&')%)*%-.(4&953%-'4(/033)(0-4(6+-6&'*'(13++&);(

@$$,',#/.9(C/1#IJ*F>#"$- <='(,&+426*(%)(6+7,3%0-*(/%*=(*='(&'>2%&'7'-*)(+1(?@?()*0-40&4(A5BCD(#E:(0-4(60-(8'(%-)*033'4(%-(8'3+/(.&+2-4(3+60*%+-);(F0-2106*2&'&G(H%3*%(IJ*;(K&%*0%-L(?%7%*'4:(A(<&011+&4(M=0&1(N+04:(<&011+&4(O0&P:(F0-6=')*'&:(FAQ(AKR;(<'3G(BCBB(CCS(ABB

09.--,1,&.',#/(K,*"."&AF $%&'(T9)*'7)

L./%1.&'%"*$(EF H%3*%(IJ*;(K&%*0%-L(?%7%*'4(

)*M%,"*H*/'-

0#/$,',#/-

NO,$*/&*

!"#$% !"#&'(")"*+ ,+-+&. /('-0123("42(5.3+235'.60-78

%".4('6+'2* 9'*:"53/23!"#$%

/;"36'6"3<-(-63=2().36-(+32=3-3='("36(2+"4+'2*3.7.+")3-*53-.3.&4;>3.;2&053?"34;"4:"53?73-39@93='("3"*A'*""(3&62*3'*.+-00-+'2*>3'*3-442(5-*4"3<'+;392*52*3@*5"(A(2&*536(24"5&(".8

/;"3'*+&)".4"*+3)-+"('-03'*3+;'.3<(-63'.3'5"*+'4-03+23+;"36(25&4+35"+-'0"53'*3"*+(73$%3BCDE3-*5>3;"*4">342*.'5"("5342)60'-*+3<'+;3+;"3("#&'(")"*+.32=3BFDGH3IC8

JK'5"*4"/"L+ JK'5"*4"/76" M'0"1-)" 9'*:"53/23!"#$%N(25&4+35-+-3.;""+ @."(3O&'5" PNQRQS9"-=0"+STCHBGS"*UBV865=

W-*&=-4+&("(X.35"40-(-+'2*32*3+;"3'*+&)".4"*+8 P2*.&0+-+'2* P2*='()-+'2*32=3$*+&)".4"*+3&."53Y'0+'3PNQRQ865=

W-+"('-03.-="+735-+-3.;""+ @."(3O&'5" Y'0+'3PNQRQ3,-="+73%-+-3,;""+865=

M'("3(".'.+-*4"3-.."..)"*+ /".+3("62(+ BEEBGDSTM3I.."..)"*+865=

!"#"$%&'%(")%*+&"%,,,-./012$-3'-/4%&'%35"34%3/$$"6&%*&1&/*7%8',6.'18%1&&1359"6&*%168%#'$%8"&1+.*%'#%'&5"$%2$'8/3&*-

:;<=!%=>%?=@A=@

!"#$%&%'(%&

)*+,&+),&)-../0++1112345"/627'248+!"#$9+:/$6".;'<"3+=$6.;(;7".$>'!6;<.2"9/?

!"#$%&'()*+,-'".',#/0*"',1,&.'*

!"#$%&'()$*(+,(-.$(+/0+

)*+,-'".',#/(2#3 4546

7,'8* 0!(9:5(;<**$(;8**=*

;'.'%- >%'?#",-*$(@#"(A-*

;%<*"-*$*-(!"#$%&'BC !"#

;%<*"-*$*$(DE(!"#$%&'BC !"#

C.'*(>%'?#",-*$(1#"(A-* F4(>%+(GF44

!",H."E(A-* $%&'()*%+,()*%+-(.(/%-%.0+(.1+234%+'05663./+1%73,%8

>$$,',#/.8(B/1#IJ*EK#"$- 9:3'+6451&,0+3'+,5-6*3(.0+;30:+0:%+4%<&34%-%.0'+52+=>+?0(.1(41+@ABCD+#E+FG34%+?(2%0H+I%4254-(.,%+52+J(0%43(*'F+(.1+,(.+)%+3.'0(**%1+3.+)%*5;+/45&.1+*5,(035.'8 J(.&2(,0&4%4K+L3*03+MN08+O430(3.P+=3-30%1Q+@+94(22541+R:(42+$5(1Q+94(22541+I(4SQ+J(.,:%'0%4Q+J@T+@OU8+9%*K+BCBB+CCV+@BB

08.--,1,&.',#/(L,*"."&?E G34%+?H'0%-'

M./%1.&'%"*$(DE L3*03+MN08+O430(3.P+=3-30%1+

)*N%,"*H*/'-

0#/$,',#/-

O=,$*/&*

!"#$% !"#&'(")"*+ ,+-+&. /('-0123("42(5.3+235'.60-78

%".4('6+'2* 9'*:"53/23!"#$%

;<3=>?3,6""53,0""@"3A2().36-(+32A3-3A'("36(2+"4+'2*3.7.+")3-*53-.3.&4BC3.B2&053D"34B"4:"53D73-39E3A'("3"*F'*""(3&62*3'*.+-00-+'2*C3'*3-442(5-*4"3G'+B392*52*3E*5"(F(2&*536(24"5&(".8

H@'5"*4"/"I+ H@'5"*4"/76" J'0"1-)" 9'*:"53/23!"#$%<(25&4+35-+-3.B""+ E."(3K&'5" ;<3=>?3;2)D'*"53LM865A

N-+"('-03.-A"+735-+-3.B""+ E."(3K&'5" O'0+'3;<=>?3,-A"+73%-+-3,B""+865A

N-*&A-4+&("(P.35"40-(-+'2*32*342)D&.+'D0"3)-+"('-0. ;2*.&0+-+'2* ;<=>?342*A'()-+'2*32A3G"'FB+.865A

J'("3(".'.+-*4"Q3H13R?==S? /".+3("62(+ RTUTMV3/".+3("62(+3S <-(+3R865A

J'("340-.'A'4-+'2*Q3H13R?>LRSU /".+3("62(+ RTUTM%3;0-..'A'4-+'2*3("62(+865A

!"#"$%&'%(")%*+&"%,,,-./012$-3'-/4%&'%35"34%3/$$"6&%*&1&/*7%8',6.'18%1&&1359"6&*%168%#'$%8"&1+.*%'#%'&5"$%2$'8/3&*-

:;<=!%=>%?=@A=@

!"#$%&%'(%&

)*+,&+),&)-../0++1112345"/627'248+!"#$9+:/$6".;'<"3+=$6.;(;7".$>'!6;<.2"9/?

!"#$%&'()*+,-'".',#/0*"',1,&.'*

!"#$%&'()$*(+,(-.$(+/0+

)*+,-'".',#/(2#3 44567,'8* 9:7;9<(4=>(?@A

B'.'%- @%'C#",-*$(D#"(E-*

B%F*"-*$*-(!"#$%&':G !"#

B%F*"-*$*$(HI(!"#$%&':G !"#

G.'*(@%'C#",-*$(1#"(E-* 4=(@F"(J>44

!",K."I(E-* #$%&'($)%*+(,)-.+*/)(,0*$1(2,)32%1.%).,/).,$42%)+&+1*3)52%)5(6(,7)*89(:3*,1).,/)5(11(,7+)12)$2,$%*1*)+1%9$19%*+;

@$$,',#/.8(:/1#LM*IN#"$- <('1()=>?@)A1/B)C)D%.552%/)E4.%5)F2./B)D%.552%/)G.%HB)I.,$4*+1*%B)ICJ)C?K;)D*'L)MCNC)OON)CMMM;)P23:'(*+)Q(14)AR)S1.,/.%/)CTMOU)VW(%*)S.5*1&)G*%52%3.,$*)25)I.1*%(.'+V).,)/3.&)-*)9+*/)(,)+9-+9%5.$*).%*.+;)X*&Q2%/+L)*'*$1($.')P.-'*)I.,.7*3*,1)S&+1*3)PIS)1%.&)$$1Y):%*3(+*+)5(6(,7)5(6).11.$4(,7)$(Y(')$(Y('+)3*$4.,($.'

08.--,1,&.',#/(9,*"."&CI P(Y('

?./%1.&'%"*$(HI <('1()=>1;)?%(1.(,@)A(3(1*/)

)*O%,"*K*/'-

0#/$,',#/-

PQ,$*/&*

!"#$% !"#&'(")"*+ ,+-+&. /('-0123("42(5.3+235'.60-78

%".4('6+'2* 9'*:"53/23!"#$%

/;"."3<'='*>.34-*32*073?"3&."53'*3-442(5-*4"3@'+;3+;"3)-*&<-4+&("(.3("42))"*5-+'2*.3-*539A3,+-*5-(5.3-*53B-*&-0.32<3C2253D(-4+'4"836-(+'4&0-(3-++"*+'2*3'.35(-@*3+239A3,+-*5-(53EFGHI3-*53>&'5-*4"3CJKLM340-&."3N8M8N3

EO'5"*4"/"=+ EO'5"*4"/76" P'0"1-)" 9'*:"53/23!"#$%

/"4;*'4-035-+-.;""+Q3R$/JRS3HLK3@'+;3R$/JTURV, A."(3C&'5" RSHLK865<

/"4;*'4-035-+-.;""+Q3R$/JRS3HLK3BVW3@'+;3R$/JTURV, A."(3C&'5" RSHLKBVWJR$/3T3J RV,865<

/"4;*'4-03%-+-.;""+Q3R$/JRS3HLK3BVW3@'+;3!"?-( A."(3C&'5" RSHLKBVWJ!"?-(865<

R"-0+;3-*53,-<"+73%-+- ,-<"+73%-+-3U3$*<2()-+'2*

R$/JRSXHLKXBVWXCYJ"*JKL8NKKZ865<

E&(26"-*3/"4;*'4-03V66(2O-0[3E/VKMUKFLH[3'..&"53HM8HN8KZ8 \2*.&0+-+'2* E/VXKMXKFLNXNKKZJHNJ

HMX"*XN865<

!"#"$%&'%(")%*+&"%,,,-./012$-3'-/4%&'%35"34%3/$$"6&%*&1&/*7%8',6.'18%1&&1359"6&*%168%#'$%8"&1+.*%'#%'&5"$%2$'8/3&*-

:;<=!%=>%?=@A=@

!"#$%&%'(%&

)*+,&+),&)-../0++1112345"/627'248+!"#$9+:/$6".;'<"3+=$6.;(;7".$>'!6;<.2"9/?

Type here to search This Folder Address Book Options Log Off

Mail

Calendar

Contacts

Deleted Items (3)

Drafts [4]

Inbox

Junk E-mail [4]

Sent Items

Click to view all folders

Achievements

Manage Folders...

Reply Reply to All Forward Move Delete Junk Close

FW: Hilti MQ-41 LU ApprovalWaters, Edward

Sent: 04 September 2012 14:56

To: Gklavinas, Pavlos; Pattni, Shiral; Flora, Rick; Scott, Chris; Burnikell, Colin

!"#$%

From: Sambasivan Sam [mailto:[email protected]]Sent: 04 September 2012 14:19To: Waters, EdwardSubject: RE: Hilti MQ-41 LU Approval%Dear Ed, Hilti MQ-41 system is fully compliant with our requirements, and can be installed in LU stations.Our Products Register will be updated to reflect this in due course. Regards,Sam. From: Waters, Edward [mailto:[email protected]]Sent: 04 September 2012 11:37To: Sambasivan SamSubject: Hilti MQ-41 LU Approval%&'()%*(+,%-.'(/'%012.3%412%'+(5.%+'%67)1287%67'%019:)+(;19%61%675/%'+(5.%(33)'//<%%=(94%67(9>/$%?'/6%)'8()3/,%For and on behalf of Hilti (Gt. Britain) Ltd Edward Waters BE (Civil)Project EngineerTechnical & Engineering Group

Hilti (Gt. Britain) LtdUnit 13 West Cross Centre, Shield Drive | BrentfordLondon TW8 9EX

T +44 161 886 1000 I M +44 7802 205 805E [email protected]

Connect with us: % % % %%%%%%%%%%%

IMPORTANT NOTICEThe information and recommendations given are believed to be correct at the time of writing. The data has been obtained from tests under laboratory orother controlled conditions and it is the user's responsibility to use the data given in the light of conditions on site and taking account of the intended useof the products concerned. Whilst Hilti (GB) Ltd can give general guidance and advice, the nature of Hilti products means that the ultimate responsibilityfor selecting the right product for particular applications must lie with the customer.

%

***********************************************************************************

The contents of the e-mail and any transmitted files are confidential and intended solely for the use of the individualor entity to whom they are addressed. Transport for London hereby exclude any warranty and any liability as to thequality or accuracy of the contents of this email and any attached transmitted files. If you are not the intendedrecipient be advised that you have received this email in error and that any use, dissemination, forwarding, printingor copying of this email is strictly prohibited., If you have received this email in error please [email protected]., This email has been sent from Transport for London, or from one of the companies within itscontrol within the meaning of Part V of the Local Government and Housing Act 1989. Further details about TfL and itssubsidiary companies can be found at http://www.tfl.gov.uk/ourcompany, This footnote also confirms that this emailmessage has been swept for the presence of computer viruses.

***********************************************************************************

Connected to Microsoft Exchange

FW: Hilti MQ-41 LU Approval - Outlook Web Access Light https://webmail.hilti.com/OWA/?ae=Item&t=IPM.Note&id...

1 of 1 17/09/2012 21:40

Product RegistrationCertificate

Printed on: 17 Sep 2012

Registration No. 1821

Title Hilti HKD Push-in medium duty anchor and HSL-3 Heavy duty anchor.

Status Authorised For Use

Supersedes ProductID N/A

Superseded By ProductID N/A

Date Authorised for Use 18 Jul 2012

Primary Use Fixings for service related installations stationwide.

Additional Info/KeyWords Manufacturer data on products include installation information.

Classification Hierarchy Civil Bridges and Structures

Manufactured By Hilti (Gt. Britain) Limited

Requirements

Conditions

Evidence

ReqID Requirement Status Trial

No records to display.

Description Linked To ReqID

No records to display.

EvidenceText EvidenceType FileNameLinked To

ReqID

Manufacturer data and installation information. Specification Manufacturer data.pdf

Pages taken from the Hilti Fastening Technology ManualEdition 2011.

Specification HSL_3_Heavy_Duty_Anchor.pdf

European Technical Approval Test reportHKD-ETA-06-0047-english-compl-MAR_2011.pdf

CSTB certificate Test report HSL_3__ETA_02_0042_1.pdf

Refer to Web site www.lu-apr.co.uk to check current status, download attachments and for details of other products.

MAYOR OF LONDON

http://www.lu-apr.co.uk/Pages/Operational/CertificateToPrint.aspx

1 of 1 17/09/2012 22:02

Documents

Hilti Lul Catalogue