Highest Value-For-Money Digital oldering Station Model ... · Unbreakable long life heating element of Soldering Pencil Unbreakable heating element ... • It has a password locking

reliable & caring since 1976

Model DSSLF04HESD is a alue- or- oney (VFM) Soldering Station with intelligent features as supervisor can program V F M

two most commonly used production process temperatures for instant recalling during operation. He can also lock limits

of temperature range (i.e if he sets mode 01 or 11 for upper temperature limit of 400°C, operator cannot solder beyond

that temperature). It simultaneously displays both SET temperature and ACTUAL temperatures. It also has in-built digital

temperature offset calibration feature to meet ISO 9000 requirements. Unique integrated design of Soldering Tip, Barrel

and complete encasing of Metallic Heating Element, provides reliable soldering joints with higher production rate.

“ESD” Safe

While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.

shown trademarks are property of their respective owners.

www.indeonline.in Landline: 0172 - 4640415 Email: [email protected] Cell Phone: 09316134502

RoHSCompliant

L E A D

F R E E

Main Power andControl Unit also has mains EMI & Surge Suppression Filter to suppress transients of mains power line.

Scope of Supply

• ESD Safe Main Power & Control Unit

ESD Safe light weight Soldering Pencil •

fitted with 200G-2.4D Chisel 2.4mm Soldering Tip

Combined Dry & Wet Tip Cleaner Support Rack•

Single Soldering Station suitable for Leadfree, SMD ICs, Solar Cells, LEDs and high mass soldering jobs

Fine pitch SMD Soldering Thru-hole Soldering Solar Cell Soldering SMD LED SolderingHigh Mass Soldering

Salient Features

● Power/Control unit has in-built following features: - Password protection - In-built temperature calibration - Sleep Timer for longer life - Error message indication - One touch temperature recalling

● Similar European Soldering Stations are 3 times costlier

● Reliable heating element does not require frequent changing

● Low running cost due to low priced/long life soldering tips

● Every spare part is available ex-stock to minimize down time.

Integrated single piece Tip & Barrel fully encase Metallic Heating Element. This uniqueness results in high heat energy storage for faster heat transfer

Versatile production horse for different soldering applications, low running cost

Highest Value-For-Money Digital oldering Station Model DSSLF04HESD

Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering/Desoldering/Hot Air Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.


Unbreakable long life heating elementof Soldering Pencil

Unbreakable heating elementin coiled form encased in metal tube

Sensor is veryclose to thesoldering tip for precise controlof temperature

Easy and faster change of Soldering Tip due to push fit design

Though rarely required to change, the Heating Elementhas its unique Push-fit designto ensure quick replacement.

Unique Soldering Tip for soldering fine pitch large size SMD ICs

Specially designed 200G-CM SMD Soldering Tip has concave cavity to hold the molten solder. It helps to solder one side of IC completely in a single shot by dragging the soldering tip on thePCB tracks on which the SMD IC is placed without any bridges

Specifications

• It has a password locking function

Push-button control with an auto-sleep function•

Various types of long life Soldering Tips available•

• Lightweight and comfortable for fatigue-free working

Real and fully electrostatic safe ESD design•

in-built calibration feature to meet ISO requirements•

Features

• Power

Temperature Range•

Sleep Time (minutes)•

Temperature Stability•

Tip to Ground Potential•

Tip to Ground Resistance•

: 90 Watts

: 100°C ~ 500°C

: 0~99 (adjustable)

: ± 2% of final value

: < 2 mV

: < 2 ohm







Solder Feeder and attachment for Soldering Pencil

Add to raise production rate and to avoid solder wire wastageoptional Auto Solder Wire Feeder

standard type is for 0.8mm dia Solder Wire

Today’s highly competitive environment, always demand

highest possible productivity of each operators as well

saving every paisa. For such demanding requirements,

the optionally available Auto Solder Feeder Model SFS81

with Digital Soldering Station DSSLF04HESD is the right

choice. Besides making one hand of operator free, it also

provides consistent quality for each solder joint as same

amount of solder wire with pre-programmed feeding is

applied at optimized process temperature.




Assured availability (normally ex-stock) of Spare Parts for Soldering Pencil

Soldering Tip

Heating Element

Replace if worn out

Replace if display shows H-E

S.No. Description Remarks

1

2

1 2

3

4

Sensor

Nipple for Tip

Replace if display shows S-E

Replace whenever required

S.No. Description Remarks

3

4

Model

200G-3.2D0.53.2

2.4 0.5 200G-2.4D

200G-1.2D0.51.2

Wide range of Soldering Tips are available for different applications of soldering

Chisel TipB

C16

Width A (mm)Description Thickness B (mm)Diagram

200G-BPointed Tip -

Sloped Tip 200G-3C-16

17

SMD Tip 200G-2CM-23

Ø0.5

Long Chisel Tip

B

C 200G-5LD0.55.0

Ø3









Warranty is 12 months from the date of invoice. It excludes any mechanical damaged part.

• Unscrew Length Adjusting Knob for clamping as per PCB requirement and screw the knobs. Put the PCB into the clamping teeth• Unscrew Angle Adjusting Knob to get the desired angle and then screw the knobs.•

PCB Clamps

Angle adjusting knob

Length Adjusting

Knob

Adjustable Printed Circuit Board Holder

Model: IPCBH200ESD

ESD Safe PCB Assembly Holder & Solder Wire Reel Stand

360 degree adjustable

• The PCB can be turned and rotated thru-out 360° to set the PCB to comfortable positioning to have every access (like front, back viewing) of the PCB. Holds circuit boards up to 200 x 130mm size.• Spring Clamp for holding PCBs• Light weight, easy to move around•

Features:

Operation:

Solder Wire Reel Stand with guide is used to hold the Solder Wire Reel upto 1kg. This stand has Collection Plate also for drop-out solder wire to avoid mess on the working table.

• Holds upto 1 kg roll of solder wire

Maximum Solder Spool width: 80mm•

Shaft Diameter: 15mm •

Keeps Work Bench neat and clean •

Provides smooth draw out of Solder Wire •

Size: 145(L) x 113(W) x 120(H)mm (approx.)•

MetallicCollection Plate forsolderdrop-outs

Solder Wire Reel Stand

Model: IRWRH500





Warranty is 12 months from the date of invoice. It excludes consumeable items as filters and any mechanical damaged part.

Spare replacement Filters available normally ex-stock.

Replacement Filter

P/N: IRF493

never miss on any Soldering Operator’s Workbench

ESD Safe Clamp Type Solder Fume Absorber Model I493AESD

Table Clamp Solder Fume Absorber Model I493-AAdjustable Extension Arm & Angle of Fume Absorber provideunique advantage that it is directly on the top of solder fumes.

Adjustable extension arm positions Fume Absorber at desired angle and position to maximize the absorption of the solder fumes, besides saving workbench space

Specifications:

• Removes noxious fumes quickly, operator will not inhale the same directly.

• Clamp type design saves your work space

• Easier and convenient extension arm provides easy angle adjustment as per solder fumes absorption requirement

• Replaceable filter is made from urethane with refined, activated high absorption carbon

• Power consumption: 20 watt

• Input supply: 220V AC, 50 Hz

Useful accessories supplied with ESD Safe Clamp type Solder Fume Absorber Model I493A

Attachment to connect the hose to re-direct the solder fumes outside the working area.

Attachment to re-direct the solder fumes so that thefume is not inhaled by other operators

“ESD” Safe






ESD Safe Straight SMD Tweezer P/N: ESD-14

• With ESD Safe coatingSuper fine straight tip type• Material: Stainless Steel • Non-Magnetic• Length: 110mm (approx.)•

“ESD” Safe

for handling small parts and SMD components and fine wires

for regeneration of oxidized Soldering Tips

• Regular use will prolong the life of Soldering Tips. It is compatible with leadfree •

and non-leadfree solders Rotate the hot ip on paste for regeneration.•

Weller Germany Soldering Tip Activator

“ESD” Safe

• ESD Safe Made from special tool steel •

blade, hardened for long-term cutting performance Cutting capacity:•

copper wire 1.3mm dia. In-built spring action•Hardened cutting edges• Length: 140mm•

Germany

R

P/N: T3886ESD Safe Precision SMD Cutter

Spring Loaded SMD Flux Pen

For precision flux application in a convenient micro tip Pen format.

Gently press the chiseled tip against work surface to start the flow. The dispensing mechanism eliminates dripping, pooling & wastage.

• High quality fine mesh Desoldering Wick with no clean flux

Pure oxygen-free copper wire• Size: 2 mm wide & 1.5 meter long•

High quality Desoldering WickFine Mesh

width: 2.0mm; Length: 1.5 meter

Hi-Quality Tools & Accessories for Electronics Assembly and Rework

ESD Safe Table Mat Kit (0.6x1.2 meter)

P/N: ITGM-0612

• This kit contains: 2-layer Mat of size 0.6x1.2 meter with 2 Snap Buttons on opposite corners, Wrist Strap and Dual Jack Grounding Cord 1 MΩ Resistor in •

the grounding wire Total thickness 2 mm, 2-Layer• Resistivity: Surface layer: 10 Ω ~ 10 Ω;

6 9• Bottom layer: 10 Ω ~ 10 Ω

3 5

Other sizes like 0.9x1.5 meter or as per customer’s requirement are also readily available.

Full Rolls of 1x10 meter sizes are also available.

Portable Illuminated Magnifier P/N: 8092LED

• Magnification: 3diopter+12diopter Flip down cover • 88 mm (3.5 inch) Lens dia• Input Supply: 230V, 50 Hz• Body Colour: White• Lens Material: Glass• Light Source: SMD LEDs•

• Mounting: Table top type

Highest Quality

type

STANNOL® solder wire is a proven and reliable product of Stannol research, developed to meet high quality requirements in industrial electronic production as well as for quick rework. This solder wire is very efficient by its high activity, which results in quick spread of solder and electrical safe residues. It has a halide activated rosin flux.

Stannol Solder Wire, 0.7mm diaGermany

S-Sn60Pb40, 0.7 mm, 500g

Leadfree Sn99Cu1 Solder Wires of dia 0.5mm, 0.7mm & 1mm in 500 grams spools available.

Ordering No.: 519244

Documents

Highest Value-For-Money Digital oldering Station Model ... · Unbreakable long life heating element of Soldering Pencil Unbreakable heating element ... • It has a password locking