Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
2000 ºF Plus ServiceExcellent for long-term outdoor exposureCompatible for all Industrial Sewing Machines
ST-304 and ST-INC High Temperature Sewing Thread are constructed with 10 strands of .0018 wire wound in a unique fashion and covered with three flame retardant polyester threads to prevent metal-to-metal wear. Both the ST-304 and ST-INC are coated with silicone for smooth operation.
High TemperatureSewing Thread
ACS ST-304/ST-INC
High TemperatureSewing Thread
ST-304/ST-INC
Founded in 1939, ACS Industries is proud of its leading reputation for quality, expertise and service in a wide variety of metal mesh and wire products. For more information, contact us at the address below.
ACS Industries, Inc.Insulation Products Division
6017 South Loop EastHouston, Texas, U.S. 77033
Tel: +1-800-227-1939 Ext.6642
Fax: 713-456-2117
Description:ST-304 & ST-INC are manufactured from ten strands of .0017 wire wound in a unique fashion and then covered with a flame retardant polyester thread. Thread is also coated with silicone lubricant.
ST-304 uses:This thread has been designed for high temperature. Removableand Reusable Insulation Blankets for the Marine, Aerospace, Industrial and Commercial Industries.
ST-INC uses:This thread has been designed for all of the uses that ST-304 is for plus Fire Proofing pads where extremely high temperatureresistance is required.
Features & Benefits: • Polyester Jacketing protects sewing machine guides from
being grooved by metal-to-metal contact• Lubricant provides smooth passage of thread• Reduced downtime from thread breakage• Increased productivity• Will withstand high heat and temperature cycling• Will maintain integrity after long-term exposure to outside
elements• Resistant to mildew, aging, alkalis, chlorides and many other
liquids and gases
Physical Properties:Wire: ST-304 10 Strands .0017” Dia. 304SS
ST-INC 10 Strands .0017” Dia. Inconel 600Temperature Limitations: ST-304 1000ºF
ST-INC 2000ºF
Yield: ST-304 Approx. 6500 LFT per poundST-INC Approx. 6100 LFT per pound
Lubricant: #4510 SiliconeOverall Diameter: .0145”Break Strength: 8 lbElongation: 30%
Specifications:• AMS-5647• ASTM-A182• ASTM-A276• ASTM-A314• ASTM-A479• ASTM-A580• FEDERAL-QQ-S-763• MIL-S-862• MIL-S-23195
Other Accessories:• Knitted Wire Mesh• Lacing Anchors, Quilting Pins
and Speed Washers• Tie Wire• Hog Rings• Draw Cord and Cable• Etc.