Embed Size (px)
Citation preview
HIGH STRENGTH FRICTION
GRIPEN14399-3 HR & HV
8.8 - 10.9
STUDSDIN.938DIN.939
5.8 8.8 10.9 12.9
HEXAGON BOLTS
DIN.931DIN.933DIN.960DIN.961
8.8 10.9 12.9FOUNDATION
BOLTSBS.7419
DIN.529/E
4.6 8.8 A2 A4
STAINLESS STEEL
A1A2A4
HEXAGON NUTSDIN.934
DIN.439BBS.1768BS.1083
5 - 8 - 10 - 12ALLTHREADSDIN.975DIN.976
4.6 - 8.812.9
TIE-RODSM6 - M100
3/8” - 4”
4.6 - 8.8 - 10.9 - 12.9WASHERS
BS.4320DIN.125
EN14399 - 6DIN.6916 HV
DIN.6917 - 6918
NYLOCNUTSDIN.985BS.1768
5 - 8 - 10
Units C1, C2, D6 & B3 Hortonwood 10Telford, Shropshire UKTF1 7ES
t 44 (0) 1952 676700
f 44 (0) 1952 676800
w www.dinstock.com
Certificate No. LRQ 4006330
Full in-house testing on all bolting, nuts and washers to meet with all EU/CE requirements for
pre-load and non pre-load bolt assemblies. Certified to ISO.9001:2008 with Lloyds Registrar and
in the process of achieving CE Approval.
J01-78384 Dinstock Introduction Folder v2.indd 1 07/02/2011 12:00
For over 40 years *DinStock™ has
been at the heart of U.K. Manufacturing,
offering real solutions to a growing
number of sectors and markets, including;
Rail, General Construction, Marine,
Civil Engineering and the Metalworking
Industry
With specialist manufacturing centres
on two sites in Shropshire and the West
Midlands in the heart of England, we
are ideally located with easy access to
motorway arteries, international airports
and sea ports enabling quick & efficient
distribution by road, sea and air, not
only within the U.K., but also throughout
Europe and worldwide.
As part of the Jackdaw Group of
companies, DinStock™ has the added
ability to offer the range of Industrial
Tooling; Hand Tools, Power Tools, Cutting
Tools, Carbine Tools; PPE products
totalling over 60,000 additional lines. As
a group, we are leading wholesalers and
stockist of top branded industrial power
tool & accessories including Makita, Bosch
Metabo & Stihl Power tools.
Our partnership in Europe with GDPA
fasteners of India, means we are able
to offer their quality assured Forgings,
finished by us in the U.K. Bulk deliveries
are catered for direct from India with the
ability to offer smaller lots more rapidly
within Europe in Days, instead of weeks!
*DinStock™ is the fastening division of Jackdaw Tools Ltd & Jackdaw Mfg Co Ltd
With a vast stock portfolio of standard, non-preferred and blank forgings, there is little we cannot offer on a next day delivery to almost anywhere – worldwide!
Keeping the world from falling apart since 1963…
gdpafasteners
With modern warehouse facilities
totalling over 20,000sq.ft and equipped
with the latest automated systems and
computer controlled stocks for over
80,000 product lines, we can usually
offer a quotation immediately and advise
you of availability, delivery time and
costs.
Our well equipped machine centre
caters for most types of manufacturing
processes including Landis Thread
Cutting machines, Fette Rolling, CNC
Lathes and Ward Capstans for small
precision turning and batch work.
C E R T I F I C A T I O N
We understand the importance of correct certification, traceability and batch testing. Within our ISO:9001 quality system, we undertake to offer you this on all our manufactured products including pre-load and non pre-load test certification for structural fasteners and fixings.
D I S T R I B U T I O N
Our ability to both manufacture and source the vast range of fasteners and fixings enables us to offer you a single solution to fulfil all your requirements.
C O A T I N G
S E R V I C E
We are well placed to offer almost any type of surface finish you could wish for; Galvanized, Electro-Zinc Plated, Dacromet®, Sheraplex®, Sherardized and many more.
We pride ourselves on being efficient and reliable when it comes to delivery times. Our reputation has been built on our ‘promise’ to deliver on-time, every time and with a quality that is assured, proven and tested!
Robert Pearson Managing Director DinStock Ltd, Jackdaw Tools Group.
...The group strives for the highest standards of quality, reliability and customer service. Our word is our guarantee, our reputation, and yours, is guarantee, our reputation, and yours, is literally built on what we do!...
We have no minimum order quantity and no minimum order value
A P P R O V E DFull In-House testing on all bolting, nuts and washes to meet with all EU / CE requirements for
pre-load and non pre-load bolt assemblies.
Certified to ISO.9001:2008 with Lloyds Registrar and in the process of achieving CE approval.
Our STANDARD production programme consist of the following ranges;
FOUNDATION BOLTING:SQUARE SQUARE & HEXAGONBS.7419 Din.601 4.6, 8.8, A2 & A4
M12 to M64 diameter and up to 1,500mm lengths
HEXAGON BOLTING: NON-PRE LOAD (SB)Din.931, 933, 960, 961, BS.1768: 4.6, 8.8, 10.9, 12.9, SAE:5 &SAE:8
M6 to M100 diameter
3/8”- 4” diameter
ALLTHREAD RODS: 1M, 2M & 3M LENGTHSDin.975 4.6, 8.8, 10.9, 12.9, B7 & B8
M6 to M100 diameter
TIE-RODS & ENGINEERS STUDSDin.938, 939, Double Ended Tie-Rods
4.6, 5.8, 8.8, 10.9, 12.9. A2 & A4
M6 t0 M100 diameter (1/4” – 4”)
PRE-LOAD FASTENERS: HIGH STRENGTH FRICTION GRIP HR/HVBS.4395-1 & EN14399-3 HR/HV 8.8 & 10.9
EN14399-6 & EN14399-9 Hardened & DTI Washers
M12 – M36 diameters (1/2” to 1.3/8”)
J01-78384 Dinstock Introduction Folder v2.indd 2 07/02/2011 12:00
For over 40 years *DinStock™ has
been at the heart of U.K. Manufacturing,
offering real solutions to a growing
number of sectors and markets, including;
Rail, General Construction, Marine,
Civil Engineering and the Metalworking
Industry
With specialist manufacturing centres
on two sites in Shropshire and the West
Midlands in the heart of England, we
are ideally located with easy access to
motorway arteries, international airports
and sea ports enabling quick & efficient
distribution by road, sea and air, not
only within the U.K., but also throughout
Europe and worldwide.
As part of the Jackdaw Group of
companies, DinStock™ has the added
ability to offer the range of Industrial
Tooling; Hand Tools, Power Tools, Cutting
Tools, Carbine Tools; PPE products
totalling over 60,000 additional lines. As
a group, we are leading wholesalers and
stockist of top branded industrial power
tool & accessories including Makita, Bosch
Metabo & Stihl Power tools.
Our partnership in Europe with GDPA
fasteners of India, means we are able
to offer their quality assured Forgings,
finished by us in the U.K. Bulk deliveries
are catered for direct from India with the
ability to offer smaller lots more rapidly
within Europe in Days, instead of weeks!
*DinStock™ is the fastening division of Jackdaw Tools Ltd & Jackdaw Mfg Co Ltd
With a vast stock portfolio of standard, non-preferred and blank forgings, there is little we cannot offer on a next day delivery to almost anywhere – worldwide!
Keeping the world from falling apart since 1963…
gdpafasteners
With modern warehouse facilities
totalling over 20,000sq.ft and equipped
with the latest automated systems and
computer controlled stocks for over
80,000 product lines, we can usually
offer a quotation immediately and advise
you of availability, delivery time and
costs.
Our well equipped machine centre
caters for most types of manufacturing
processes including Landis Thread
Cutting machines, Fette Rolling, CNC
Lathes and Ward Capstans for small
precision turning and batch work.
C E R T I F I C A T I O N
We understand the importance of correct certification, traceability and batch testing. Within our ISO:9001 quality system, we undertake to offer you this on all our manufactured products including pre-load and non pre-load test certification for structural fasteners and fixings.
D I S T R I B U T I O N
Our ability to both manufacture and source the vast range of fasteners and fixings enables us to offer you a single solution to fulfil all your requirements.
C O A T I N G
S E R V I C E
We are well placed to offer almost any type of surface finish you could wish for; Galvanized, Electro-Zinc Plated, Dacromet®, Sheraplex®, Sherardized and many more.
We pride ourselves on being efficient and reliable when it comes to delivery times. Our reputation has been built on our ‘promise’ to deliver on-time, every time and with a quality that is assured, proven and tested!
Robert Pearson Managing Director DinStock Ltd, Jackdaw Tools Group.
...The group strives for the highest standards of quality, reliability and customer service. Our word is our guarantee, our reputation, and yours, is guarantee, our reputation, and yours, is literally built on what we do!...
We have no minimum order quantity and no minimum order value
A P P R O V E DFull In-House testing on all bolting, nuts and washes to meet with all EU / CE requirements for
pre-load and non pre-load bolt assemblies.
Certified to ISO.9001:2008 with Lloyds Registrar and in the process of achieving CE approval.
Our STANDARD production programme consist of the following ranges;
FOUNDATION BOLTING:SQUARE SQUARE & HEXAGONBS.7419 Din.601 4.6, 8.8, A2 & A4
M12 to M64 diameter and up to 1,500mm lengths
HEXAGON BOLTING: NON-PRE LOAD (SB)Din.931, 933, 960, 961, BS.1768: 4.6, 8.8, 10.9, 12.9, SAE:5 &SAE:8
M6 to M100 diameter
3/8”- 4” diameter
ALLTHREAD RODS: 1M, 2M & 3M LENGTHSDin.975 4.6, 8.8, 10.9, 12.9, B7 & B8
M6 to M100 diameter
TIE-RODS & ENGINEERS STUDSDin.938, 939, Double Ended Tie-Rods
4.6, 5.8, 8.8, 10.9, 12.9. A2 & A4
M6 t0 M100 diameter (1/4” – 4”)
PRE-LOAD FASTENERS: HIGH STRENGTH FRICTION GRIP HR/HVBS.4395-1 & EN14399-3 HR/HV 8.8 & 10.9
EN14399-6 & EN14399-9 Hardened & DTI Washers
M12 – M36 diameters (1/2” to 1.3/8”)
J01-78384 Dinstock Introduction Folder v2.indd 2 07/02/2011 12:00
HIGH STRENGTH FRICTION
GRIPEN14399-3 HR & HV
8.8 - 10.9
STUDSDIN.938DIN.939
5.8 8.8 10.9 12.9
HEXAGON BOLTS
DIN.931DIN.933DIN.960DIN.961
8.8 10.9 12.9FOUNDATION
BOLTSBS.7419
DIN.529/E
4.6 8.8 A2 A4
STAINLESS STEEL
A1A2A4
HEXAGON NUTSDIN.934
DIN.439BBS.1768BS.1083
5 - 8 - 10 - 12ALLTHREADSDIN.975DIN.976
4.6 - 8.812.9
TIE-RODSM6 - M100
3/8” - 4”
4.6 - 8.8 - 10.9 - 12.9WASHERS
BS.4320DIN.125
EN14399 - 6DIN.6916 HV
DIN.6917 - 6918
NYLOCNUTSDIN.985BS.1768
5 - 8 - 10
Units C1, C2, D6 & B3 Hortonwood 10Telford, Shropshire UKTF1 7ES
t 44 (0) 1952 676700
f 44 (0) 1952 676800
w www.dinstock.com
Certificate No. LRQ 4006330
Full in-house testing on all bolting, nuts and washers to meet with all EU/CE requirements for
pre-load and non pre-load bolt assemblies. Certified to ISO.9001:2008 with Lloyds Registrar and
in the process of achieving CE Approval.
J01-78384 Dinstock Introduction Folder v2.indd 1 07/02/2011 12:00
