Upload
buiminh
View
216
Download
0
Embed Size (px)
Citation preview
RF Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 14
High Speed Flex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Data Rate™ Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9Data Rate™ Cable AssembliesData Rate™ Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Speed I/O Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
AccliMate™ Cable Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12 - 1412 - 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1111
2
• Standard High Speed Flex• High Speed Data Links & Edge Card• ZIF Flex Jumpers• Design / Build Capabilities
• Data Rate™ Coax & Twinax Cable Assemblies• DataRay™ High Density Cable Assemblies• Custom Data Rate™ Cable Capabilities• Data Rate™ Cable Specifications
• Complete RF Cable Assemblies• Unique RF Cable Assemblies• Custom RF Cable Assemblies
Interconnect SolutionsSamtec offers a full line of interconnect solutions for Signal Integrity, Rugged and Micro applications, with the unique ability to weave products together for mix and match solutions for custom applications.
High Speed Cable Assemblies
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• High Speed Data Links & Edge Card
BOARD-TO-BOARD
CABL
E AS
SEM
BLIE
S PANEL AND I/O
S U D D E N S E R V I C E®
• V-Port™ Cable Assemblies• HDMI™ Cable Assemblies• Edge Rate™ Cable Assemblies
• IP68 Sealed Circular Ethernet, USB, RF Assemblies• Field Termination kits• Custom & Application Specific Sealed Circular Assemblies
RF Cable AssembliesRF Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Speed I/O Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Final Inch® PCB Design Tools• Reference designs that save design, development
and validation time and resources• Models of connector components with Samtec recommended
Final Inch® PCB trace routing to the connector• Downloadable art files and HSPICE simulations• Test and evaluation kits• Empirical signal integrity data• “On-Request” test data
Signal Integrity CenterOnline support and reference for selection, development, simulation and testing of high speed systems for any application.• User friendly website• High speed connector simulations, models, reports,
drawings and searches• SPICE, IBIS models • High speed characterization reports• Time and frequency domain test data• Bandwidth Performance Selector and Interactive Cable Builders• Application notes: reference designs that verify
performance to industry standards
Signal Integrity GroupPersonal SI support for questions that cannot be answered via the Signal Integrity Center.• EE customer interface via in-house staff• Design, modeling and testing of sub-systems • Application Specific Services for design,
modeling and testing of full or sub-system • Samtec involvement available
at various levels• Specific services tailored to
your needs and products• Extensive modeling, simulation
and testing capabilities
Signal Integrity Services
Contact Us!For assistance with…
Signal Integrity Capabilities, contact [email protected] Rate™ Cables, contact [email protected] Cable Systems, contact [email protected] Speed Flex, contact [email protected] & Application Specific Cables, contact [email protected]
4
Data Rate™ Cable AssembliesCoax Data Rate™ Cable• 38 AWG ribbon coax cable• 50Ω & 75Ω signal routing• 0,5mm, 0,635mm and 0,8mm pitch• Vertical or edge mount termination to cable• Ideal for longer cable assemblies (6" to 40")
Coax Data Rate™ Cable Assemblies Rated @ -3dB Insertion Loss
SERIES EQCD HQCD MICD HBCDPITCH 0,8 mm 0,5 mm 0,635 mm 0,5 mmMATES QTE/QSE QTH/QSH MIS/MIT BTH/BSH12" (304,8mm) 1.42 GHz / 2.82 Gbps 1.16 GHz / 2.32 Gbps 801 MHz / 1.60 Gbps 2.01 GHz / 4.02 Gbps19.68" (0,5m) 900 MHz / 1.80 Gbps 740 MHz / 1.48 Gbps 648 MHz / 1.29 Gbps 1.60 GHz / 3.20 Gbps39.37" (1m) 480 MHz / 0.96 Gbps 390 MHz / 0.78 Gbps 400 MHz / 0.80 Gbps 586 MHz / 1.17 Gbps390 MHz / 0.78 Gbps 400 MHz / 0.80 Gbps 586 MHz / 1.17 Gbps
Board-to-Board Coax Data Rate™ Cable• 38 AWG ribbon coax cable• 50Ω signal routing• Header or socket termination• Vertical or edge mount• .050" (1,27mm), 2mm (.079") and
.100" (2,54mm) pitch • .050" (1,27mm) pitch with high reliability
Tiger Eye™ Contact• .100" (2,54mm) pitch is JTAG
(IEEE 1149.1) compatible• High cable flexing life
(> 40,000 cycles)• Ideal for longer cable
assemblies (6" to 40")
Coax Data Rate™ Cable Assemblies Rated @ -3dB Insertion Loss
SERIES FHSC THSC HHSCPITCH 1,27 mm 2 mm 2,54 mmMATES SFM/TFM SQW/TMMH SSW/TSW10" (254mm) 175 MHz / 0.35 Gbps 175 MHz / 0.35 Gbps 400 MHz / 0.8 Gbps
Visit www.samtec.com /cable_builder for our Interactive Cable Builder program!
Headers or sockets
Screw downs available
50Ω or 75Ω signal routing
38 AWG 50Ω coax
High speed connectors
38 AWG 50Ω coax Vertical or edge mount
5
Twinax Data Rate™ Cable • 30 AWG ribbon twinax cable• 100Ω Differential Pair signal routing• Choice of terminations:
- Edge card- High speed connectors on 0,5mm, 0,635mm and 0,8mm pitch
- Shielded High Speed Connectorson 0,635mm pitch
• Vertical or edge mount termination to cable
• Locking & Latching options• Shielded and unshielded versions• Optional screw downs• Low skew (pair-to-pair < 10 ps/ft;
within a pair < 5ps/ft )• Superior EMI Performance
(FCC Class A) • Contact [email protected]
for custom Signal Integrity specifications
Twinax Data Rate™ Cable Assemblies Rated @ -3dB Insertion Loss
SERIES EQDP HQDP EEDP 6QDPSPITCH 0,8 mm 0,5 mm 0,8 mm 0,635 mmMATES QTE-DP/QSE-DP QTH-DP/QSH-DP HSEC8 QMSS-DP/QFSS-DP12" (304,8mm) 4.74 GHz / 9.48 Gbps 2.12 GHz / 4.24 Gbps N/A 1.86 GHz / 3.72 Gbps19.68" (0,5m) 4.46 GHz / 8.92 Gbps 1.64 GHz / 3.28 Gbps 2.85 GHz / 5.70 Gbps 1.58 GHz / 3.16 Gbps39.37" (1m) 1.59 GHz / 3.18 Gbps 1.37 GHz / 2.74 Gbps 1.15 GHz / 2.30 Gbps 1.25 GHz / 2.50 Gbps
Edge Card
Latching and screw systems available
High speed connectors
Shielded or unshielded
30 AWG 100Ω twinax
5
1.25 GHz / 2.50 Gbps
Combination Guide Pin/Locking Posts
Mounting Blocks for Right Angle applications
30 AWG 100Ω Data Rate™ twinax cable
Socket or terminal end connector options
Surface Mount or Panel Mount
Finger actuated locking clips
Pin 02 Pin 01
Gnd 02 Gnd 01
Signal clip Dielectric
InsulatorGround clip
Conductor
Shield
Patent Pending
DataRay™ High Density Cable AssembliesCurrently in design – contact Samtec for more information• 30 AWG 100Ω Data Rate™ twinax cable• Optimizes Signal Integrity with no transition
board between cable and contacts• Surface Mount or Panel Mount orientations• Socket or terminal end connector options• 8 pairs per chicklet; 4 chicklets per bank• Choice of 1 or 2 banks, for a total
of 32 or 64 pairs• Bank holders with Finger Actuated Locking Clips• Combination Guide Pin/Locking Posts (solders to PCB)• Mating Surface Mount Terminal (GCAM Series) • Mounting Blocks for Right Angle applications also available
Contacts
Grounds
6
Finger actuated locking clips
Mix and match twinax and coax
Custom Data Rate™ Cable CapabilitiesBreakouts to multiple boards
Every cable 100% continuity tested and hi/pot tested
Mix and Match coax/twinax and RF
Mix and match signal & power
Custom Cables & CombinationsMix and match Data Rate™ and other cable types or customize with special sizes, lengths and types. For application specific options, contact [email protected]
Coax Cable• 26 AWG 50Ω• 30 AWG 50Ω• 32 AWG 50Ω• 34 AWG 50Ω• 38 AWG 50Ω• 38 AWG 75Ω
Quiet Power Coax• 26 AWG 20Ω
Twinax Cable• 30 AWG 100Ω
RF Cable• 32 & 36 AWG 50Ω for MHF• 20 AWG RG58 50Ω• 26 AWG RG 174 or high
performance RG 316 50Ω• 30 AWG RG 178 50Ω• 30 AWG RG 179 75Ω
26 AWG 20Ω Quiet Power coax
7
I/O Terminations
UV cured epoxy for cable termination region protection
Conventional and Industry standard terminations
Retention, screw downs, self latching and other rugged options
Special housings
High speed connectors
Rugged features
Spring contacts and pogo pins
Custom Connectors & FeaturesCustomize your assembly with a variety of industry standard, conventional and non-standard connector terminations, combinations and features.
PCI Express Interface
High Speed Connectors• Q Strips®
• Q Pairs®
• Q2TM
RF Connectors• MHF• MMCX, MCX• SMA, SMB• BNC, TNC,
N Type
High Speed I/O• HDMI• VHDCI• RJ45• USB, Firewire• D-Subminiature
RF Connectors
High Speed I/OHigh Speed I/OHigh Speed I/O
Test• Pogo Pins in shielded
and unshielded bodies• Spring Contacts• Edge Cards• Industry Standards
8
32 AWG 50Ω (± 1Ω) Coax
26 AWG 50Ω (± 1Ω) Coax
30 AWG 50Ω (± 1Ω) Coax
Data Rate™ Cable Specifi cations
(1,52) .060
(0,76).030
(1,69) .066
(17,4) .685 (1,78) .070
(5,21) 205
(0,76) 030
(0,51) .020
(1,02) .040
(1,52) .060
(12,42) .498
(5,08) .200
(1,19) .047
(1,78) .070
(0,46) .018
(1,78) .070
(1,52) .060 (5,05).1990
(0,81) .032
(0,99) .039
(20,28) .799
Coax Cables – 26 to 34 AWG
Standard Samtec Series: DHSC
34 AWG 50Ω (± 1Ω) Coax
(1,78) .070
(1,52) .060 (5,05).199
(0,81) .032
(0,80) .032
(16,66) .656
(0,46) .018
9
30 AWG 100Ω (± 5Ω) Coax
38 AWG 75Ω (± 3.5Ω) Coax
(1,78) .070
(1,52) .060 (5,02).198
(0,89) .035
(0,64) .025
(13,53) .533
(0,15) .038
(0,38) .015
(1,78) .070
(1,52) .060 (5,02) .198
(0,89) .350
(0,97) .038
(19,84) .781
(2,03) .080(0,83)
.325
(0,57) .022
(1,78) .070
(1,52) .060 (4,83) .190
(1,27) .050
(16,89) .665
Twinax Cables – 30 AWG
Coax Cables – 38 AWG
Standard Samtec Series: SQCD, MICD, HQCD, EQCD, HBCD, FHSC, HHSC, THSC
Standard Samtec Series: EQSD
Standard Samtec Series: EQDP, HQDP, EEDP, 6QDPS
38 AWG 50Ω (± 2Ω) Coax
(0,57) .022
(1,52) .060
Coax “Quiet Power” Cables – 26 AWG
(1,14) .045
(1,78) .070
(0,76) .030
(0,76) .030
(1,52) .060 (5,21) .205
(12,70) .500
26 AWG 20Ω Coax• Power Integrity: minimizes coupling to high
speed signals• Power EMI: minimizes EMI aggression• Current Rating: 4A• Capacitance: 239 pF/meter (nominal)• Inductance: .092 mH/meter (nominal)• Temp Rating: -25˚C to +105˚C
10
HDMI™Cable Assemblies• 100Ω Differential Pair
Signal Routing• Ideal for HDMI and high speed
data transfer applications• Mates with industry standard
HDMI™ receptacles
High Speed™ I/O Cable AssembliesV-Port™ Cable Assemblies• 100Ω Differential Pair Signal Routing• Ideal for high speed data transfer applications• Standard Thumbscrews• Optional Reverse Polarization• Mates with VRDPC Series – keyed to prevent
accidental mating with common VHDCI cable plugs
30 AWG Shielded Twisted Pair for longer cable runs (1 to 4 meters) (HPSTP Series)
30 AWG twinax
HDMI™ is a registered trademark of HDMI Licensing LLC.
26 AWG Low Skew Pair(HPLSP Series)
26 AWG Low Skew Pair(VPLSP Series)
Cost-efficient Shielded Twisted Pair for longer cable runs (VPSTP Series)
HPDPI Series
Edge Rate™ Cable Assemblies• 100Ω Differential Pair Signaling• 26 AWG Low Skew Pair• Cable plug with rugged Edge Rate™ contacts• Die cast cable housing• Positive latching• Mating right angle connector (ERM8-RA Series)
and PCB cage (ERC Series) also available• Mating right angle connector (ERM8-RA Series)
ERLSP Series
Edge Rate™ Contacts
26 AWG Low Skew Pair(HPLSP Series)
Die cast housing
VPSTP VPLSPNo. of Signal
Pairs 8, 12, 16, 24, 32
Cable Type 30 AWG Shielded Twisted Pair
26 AWG Low Skew Pair
Outer EMI Shield Yes Yes
Standard Cable Length 1 to 5 meters 1 to 5 meters
Applications Rugged, Panel-to-Panel
Rugged, Panel-to-Panel
Performance 1 GHz @ 1 meter* 2 GHz @ 1 meter*
* Estimated, may vary depending on signal type
HPDPI HPSTP HPLSPNo. of Signal
Pairs 5 or 8
No. of Power Lines 5
Cable Type 30 AWG Twinax
30 AWG Shielded
Twisted Pair
26 AWG Low Skew Pair
Outer EMI Shield No Yes Yes
Standard Cable Length
152 mm to 2,5 meters 1 to 5 meters 1 to 5 meters
ApplicationsRugged, Cable-to-
Board
Rugged, Panel-to-Panel
Rugged, Panel-to-Panel
Performance TBD 1 GHz @ 1 meter*
2 GHz @ 1 meter*
* Estimated, may vary depending on signal type
11
AccliMate™ Systems
TM
Locking & Latching features
Dust cap available(DCA Series)
Meets IP68 requirements
RF connectors(SCPC/SCRC Series)
USB(SCPU/SCRU Series)
Ethernet(SCPE/SCRE Series)
AccliMate™ IP68 Sealed Circular Cable Systems• Meets IP68 requirements for dust and waterproof sealing• Cable Plugs and Receptacles, size 17 shell• Shielded USB-A, USB-AM & USB-B• Shielded Ethernet/RJ45 & RF connectors • Field Termination Kits for long cable runs and
small-opening applications, where the Sealed Circular Ethernet housing is applied after the run is complete
Also Available:• Tiger Eye™ Contacts on (1,27mm) .050" pitch• Power pins on (3,96mm) .156" pitch• Size 10 shell in development
Ethernet Field Termination Kit(SCPFE Series)
Application Specific• Custom connectors• Other AWG• Other lengths• Special pitches
Power and High Densityalso available
12
Complete RF Cable Assemblies0,81mm & 1,13mm RF Cable Assemblies• 50Ω systems on a choice of 36 AWG 0,81mm
diameter or 32 AWG 1,13mm diameter coax cable• 0,81mm diameter cable with MHF1 or MHF3 Type
Plugs on End 1 and MHF1, MHF3 Type Plugs or SMA Bulkhead Jacks (Standard or Reverse Polarity) on End 2
• 1,13mm diameter cable with MHF1 Type Plugs on End 1 and MHF1 Type Plugs or SMA Bulkhead Jacks (Standard or Reverse Polarity) on End 2
• Micro RF PCB Connectors for MHF RFs also available
RG 174 & RG 316 RF Cable Assemblies• 50Ω systems on 26 AWG coax
cables – choice of 2.3 dK RG 174 or High Performance 2.1 dK RG 316
• Choice of end options, including SMA, SMB, MCX, MMCX, BNC and TNC Plugs, MCX Jacks and SMB, SMA, BNC, TNC and N Type Bulkhead Jacks
• Standard Heat Shrink Wraps• Single or double ended• Choice of cable lengths• Additional end options available• Cable components and board
level mates available
Easily Build RF Cable Assemblies Online!www.samtec.com/rfbuilder
13
RG 179 RF Cable Assemblies• 75Ω systems on 30 AWG 2.1 dK RG 179
coax cables• Choice of BNC, MCX and SMB Plugs and
BNC Bulkhead Jack end terminations• Standard Heat Shrink Wraps• Single or double ended• Choice of cable lengths• Additional end
options available• Cable components and
board level mates available
RG 178 RF Cable Assemblies• 50Ω systems on 30 AWG 2.1 dK
RG 178 coax cables• Choice of end options including
MCX & MMCX Plugs, MCX Jacks and SMA Bulkhead Jacks
• Standard Heat Shrink Wraps• Single or double ended• Choice of cable lengths• Additional end options available• Cable components and board level
mates available
RG 58 RF Cable Assemblies• 50Ω systems on 20 AWG RG 58 coax cables• Choice of TNC Reverse Polarity Plugs
and N Type Plug end terminations• Standard Heat Shrink Wraps• Single or double ended• Choice of cable lengths• Additional end options available• Cable components and board level
mates available
• Standard Heat Shrink Wraps
board level mates available
RG 58 RF Cable Assemblies• 50Ω• Choice of TNC Reverse Polarity Plugs
and N Type Plug end terminations• Standard Heat Shrink Wraps• Single or double ended• Choice of cable lengths• Additional end options available• Cable components and board level
mates available
RG 178 RF Cable Assemblies• 50
• Choice of end options including
and SMA Bulkhead Jacks• Standard Heat Shrink Wraps• Single or double ended• Choice of cable lengths
Samtec offers a full line of completely assembled RF cables, and has developed an interactive program to help you quickly and easily create a valid part number for your RF Cable Assembly, making design and ordering simple.
• Select the cable type for your assembly • Specify the assembly length, then view
available RF connector end options • Choose the End 1 and End 2 connectors
for your assembly• View the RF Cable Assembly part number,
engineering drawings and technical specifications for the series
• Order samples online• For Custom RF Cable capabilities, contact [email protected]
www.samtec.com/rfbuilder
14
Unique RF Cable SystemsCombo High Speed Connector/RF Coax Cable Assemblies• High Speed 0,8mm pitch
(Q Series®) sockets or terminals • Choice of MMCX, MCX or SMA Plugs
or Jacks• 40 or 80 RF connectors• Choice of RG 316 or RG 178 coax
cable systems• Mating Q Series® connectors and
RF receptacles also available
Custom RF Cable Capabilities• Other RF connectors including QMA, SMC, UHF,
1.0/2.3 & Mini UHF • I/O assemblies• Higher precision termination for lower loss• Custom grounding and signal
pin geometry• Reverse polarity• Double shielded• Semi-rigid, semi-flex and other cable styles• Alternative platings• Contact [email protected]
pin geometry• Reverse polarity• Double shielded• Semi-rigid, semi-flex and other cable styles• Alternative platings• Contact [email protected]
Unique RF Cable Systems
AccliMate™ IP68 Sealed Circular RF System • Cable Plugs & Receptacles with
MMCX-scale Plugs & Jacks• Meets IP68 requirements for dust
and waterproof sealing• Bundled RG 316 coax cable• Ganged RF (GRF1-C Series)
PCB Interface
Custom RF Cable Capabilities
Ganged In-line RF Cable Systems• Ganged In-line MMCX-scale RF Plugs• 2, 4, 6 or 8 positions• RG 316 coax cable, single or
double ended• Optional captive panel screws• Mating edge mount or through-hole
receptacle (GRF1-J Series) also available
GRF1 Series
SCRC Series
SCPC Series
EQRF Series
15
High Speed Edge Card• Double-sided card interface (HSF8 Series)
for mating with mini edge card connectors on 0,8mm pitch
• Choice of vertical, horizontal and edge mount mating connectors
• Easy customization of cable lengths, pin counts, polarization, etc.
Standard High Speed Flex• 0,5mm pitch (HFHM Series) and 0,8mm
pitch (HFEM Series) systems• Terminate with Single-ended or Differential
Pair High Speed connectors• High Speed shielded flex circuits• Easy customization of cable lengths,
pin counts, guide posts, connector heights, etc.
• Contact [email protected]
Differential Pair High Speed Flex Assemblies Rated @ -3dB Insertion Loss
SERIES HFEM HFEM2 HFHM HFHM2 ZFHFPITCH 0,8 mm 0,8 mm 0,5 mm 0,5 mm 0,8 mmMATES QTE-DP/QSE-DP QTE-DP/QSE-DP QTH-DP/QSH-DP QTH-DP/QSH-DP QSE-DP/ZF55" (127mm) 3.75 GHz / 7.5 Gbps 2.62 GHz / 5.24 Gbps 2.40 GHz / 4.80 Gbps 2.36 GHz / 4.72 Gbps 3.16 GHz / 6.32 Gbps10" (254mm) 1.75 GHz / 3.5 Gbps 1.36 GHz / 2.72 Gbps 1.80 GHz / 3.60 Gbps 1.64 GHz / 3.28 Gbps 1.65 GHz / 3.30 Gbps
Single-Ended High Speed Flex Assemblies Rated @ -3dB Insertion Loss
SERIES HFEM HFHM2 HSF8PITCH 0,8 mm 0,5 mm 0,8 mmMATES QTE/QSE QTH/QSH HSEC85" (127mm) 1.85 GHz / 3.70 Gbps 1.91 GHz / 3.82 Gbps 6 GHz / 12 Gbps10" (254mm) 1.15 GHz / 2.30 Gbps 1.05 GHz / 2.10 Gbps 4.5 GHz / 9 Gbps
High Density Data Link• .050" x .050" pitch grid
array (SADL Series) • Mates with SEARAY™
open pin field arrays• Standard and custom
jumper lengths and pin counts
High Speed Data Links• 0,8mm pitch (ZFHF Series)• Terminates with Differential Pair High Speed connectors
and Flex Cable Jumpers• 14 signal pairs• Easily modified for custom pin counts, cable lengths,
guide posts and connector heights• High Speed shielded flex circuits• Reversed end optional• Mating ZIF (ZF5 Series) and Q Pairs® Interfaces
(QSE-DP Series) available
High Speed Flex
Design/Build Capabilities• Double-sided and Multi-Layer• High speed, controlled
impedance designs• Design and manufacture
capabilities• Connector and component
placement