Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
A product from:
999.
1600
.02
FACADE CLADDING AND ROOF EDGING
High-quality low-maintenance facade cladding and roof edging
VinyPlus facade cladding and roof edging
Adds true enjoyment to your home
3
A beautiful and stylish appearance contributes to the enjoyment of
life. VinyPlus® can really enhance this enjoyment of life, giving homes
and buildings a contemporary character. The facade cladding and roof
edges, made of high-quality recycled plastic, are low-maintenance and
durable. The facade cladding is dimensionally stable, doesn’t warp un-
der the influence of moisture or heat, and is also unaffected by fungi
and bacteria. The durable facade panels and roof edges require little
maintenance. Scouring, sanding, painting and staining are a thing of
the past. VinyPlus® textured film cladding panels perfectly match the
textured film used for plastic frames, doors and parapets. VinyPlus®
places great value on the environment and focuses on conscientious
and sustainable construction. Therefore, the facade cladding and roof
edges are environmentally-friendly and 100% recyclable. VinyPlus®
facade cladding carries CE marking. VinyPlus® meets the essential
requirements for construction products in terms of safety, health and
the environment. VinyPlus® also complies with the Sustainable Build-
ing (DuBo) guidelines. That all makes it a responsible and sustainable
choice. It adds true enjoyment to your home!
VinyPlus® facade cladding comes in three different models.
For an authentic look, tongue-and-groove panels are ideal. Round-
edge panels give homes a contemporary and modern look. VinyPlus®
round-edge can be used horizontally, vertically or diagonally.
New in our range is the ‘opdekdeel’ component developed by Milin,
for vertical mounting between the round-edge panels.
The special textured film applied to the panels gives the facade clad-
ding the authentic, warm and natural look of wood. All the character-
istics of wood, combined with the convenience of low maintenance.
The VinyPlus® panels are available in matt and grain textures. Finally,
VinyPlus® has moulding sections for covering and protecting roof edg-
es. VinyPlus® has been used successfully in the construction industry
for many years. For example, for the sides of dormers, gables and roof
edges for dormers. Thanks to the standard length of 6 metres and
the invisible fastening, the panels can be processed quickly and easily.
This leads to a tight and finished result and prevents visible seams. It
is advisable to engage a professional construction company for the
best results. On the VinyPlus® website private individuals can submit
requests for construction companies from various regions.
FACADE CLADDING AND ROOF EDGING
2
Opt for durability and convenience, opt for VinyPlus®. Building sustainably and consciously.
VinyPlus facade cladding and roof edging
10
5VinyPlus facade cladding and roof edging4 VinyPlus facade cladding and roof edging
Round-edge panels give homes a contemporary and modern look. Round-edge is a grooved component connected with tongue and
groove, where the parts at the front are symmetrical. For horizontal as well as vertical and diagonal use. Round-edge panels are made
from high-quality recycled plastic and are coated with textured film. The colour palette features three different decors: uni, wood and
modern matt colours.
The panels have a standard length of 6 metres, so interruptions are kept to a minimum. Round-edge panels are used widely in the new
construction and recreation sectors. For example, for the renovation of gables and dormers. Old flat buildings become stylish again
with VinyPlus round-edge. VinyPlus round-edge is also ideal for new apartment complexes to be built or renovated, houseboats or
garden sheds. Round-edge is also used for parapets and overhangs.
Round-edge facade cladding
10
A special look is imparted to the VinyPlus® facade cladding with the ‘opdekdeel’ developed by Milin. The basis for this is the
opdekdeel combined with the VinyPlus® round-edge panel. The thickness of the cover results in a deeper dimension which gives
the facade a more intense aspect through shade. The opdekdelen can only be mounted vertically and, just like the round-edge
panels, they have a standard length of 6 metres and are manufactured from high-quality recycled plastics. The fastening, finishing,
colour and textured film of the opdekdeel is the same as that of the round-edge panel. This creates a uniform and clean facade
image with a unique appearance.
Opdekdeel
7VinyPlus facade cladding and roof edging6 VinyPlus facade cladding and roof edging
IN
COMBINATION
WITH THE
ROUND-EDGE
PANEL
10
9VinyPlus facade cladding and roof edgingVinyPlus facade cladding and roof edging8
Homes and buildings finished with tongue-and-groove gain an authentic look. The easy-to-assemble tongue-and-groove
components have a standard length of 6 metres and are manufactured from high-quality recycled plastics. In the tongue-and-
groove sections the top runs off decoratively into the edge band. Tongue-and-groove parts are ideally suited as an alternative to
wood or to retain the traditional appearance, through the grain textured film. The textured film gives facades a realistic natural
appearance. VinyPlus® tongue-and-groove components are suitable for, among other things, new housing to be built or
renovated, recreational housing and houseboats. The tongue-and-groove panels are also ideal for dormers, garden sheds, timber
frame and unit construction, for instance.
Tongue-and-groove facade cladding
PRODUCES A
TRADITIONAL
APPEARANCE
10
11VinyPlus facade cladding and roof edging10 VinyPlus facade cladding and roof edging
VinyPlus® roof edging ensures a sleek and beautiful finish. The panels are quick to process and easy to assemble
thanks to the standard length of 6 metres. The roof edging panels are coated with an exterior-quality textured film and are
made from high-quality recycled plastics. This simple moulding system with blind fastening fits in perfectly with the
VinyPlus® programme and offers excellent protection against wind and weather. Roof edging panels are available in a wide range
of colours and are used in new-build homes. VinyPlus® roof edges are also a favourite product in the renovation sector
for the renovation of dormers, houseboats, houses and recreation homes, among others.
Roof edging
10
12 13VinyPlus facade cladding and roof edging VinyPlus facade cladding and roof edging
FACADE CLADDING AND ROOF EDGING
Grain structure Matt
Round-edge
Opdek
Tongue-and-groove
14 15VinyPlus facade cladding and roof edging VinyPlus facade cladding and roof edgingRal colours are an approximation* mount in the mix
Wine red(Ral 3005)
Dark brown(Ral 8019)
Green(Ral 6009)
Red(Ral 3011)
Monument green(Ral n/a)
White (Ral 9010)
Cream (Ral 9001)
Ivory white (Ral 1015)
Light-grey (Ral 7035)
Grey (Ral 7001)
Moss green(Ral 6005)
Blue (Ral 5011)
Monument blue(Ral 5004)
Anthracite (Ral 7016)
Black (Ral 9017)
5-year warranty
Greyed red cedar* Dark oak Light oak Western red cedar Brown red cedar
California redwoodQuartz grey(Ral 7039) MahoganyGold oak
Basalt grey(Ral 7012)
White(Ral 9010)
Cream(Ral 9001)
Green(Ral 6009)
Anthracite (Ral 7016) Gold oak
Matt cream(Ral 9001)
Matt anthracite(Ral 7016)
Round-edge grain structure
Opdek grain structure* (combine with round-edge panel)
Round-edge matt
Cappuccino(Ral n/a)
16 17VinyPlus facade cladding and roof edging VinyPlus facade cladding and roof edging
White(Ral 9010)
Cream(Ral 9001)
Ivory white (Ral 1015)
Grey (Ral 7001)
Anthracite (Ral 7016)
Dark brown(Ral 8019)
Green(Ral 6009)
Monument green(Ral n/a)
Blue (Ral 5011)
Black (Ral 9017)
5-year warranty
Walnut
Monument blue(Ral 5004) California redwoodGreyed red cedar MahoganyGold oak
Tongue-and-groove grain structure
StorageStorage of the VinyPlus cladding panels must occur indoors, horizontally on a flat surface, with sufficient support. For storage below 5 degrees Celsius please take measures such as using heated storage with a higher ambient temperature. Outdoor storage in the sun and rain must be avoided. Caution! The packaging material between the panels can attach itself permanently to the panels after excessive exposure to sunlight.
Machining and sawingMachining and sawing the VinyPlus panels is done with normal woodworking tools. Saw with a finely-toothed circular saw. Use a rubber mallet for tapping the finishing profiles into the aluminium mounting profile. Do not place ladders, steps or scaffolding against the VinyPlus cladding panels.
FasteningFastening the VinyPlus cladding panels is done ideally with the VinyPlus fixing screws of at least 30 mm long, loosely tightened. In using lengths longer than 4 metres, 1 fixing point in the middle of the panel must be used. Star screws may be used only for this fixing point.
ColourThe thickness of the film is 200μm. The textured film is available in two different versions1. Grain structure2. Matt
VentilationWhen installing VinyPlus cladding panels, it is necessary to create ventilation and de-aeration. For horizontal installation of the panels, a minimum continuous ventilation space of 20 mm must be observed between the rear of the facade cladding and the existing construction. If the panels are mounted vertically, use double battening. This gives you an air cavity behind the structure which maintains the airflow at the top and bottom towards the edges. You can close the ventilation openings with the ventilation profile.
Battening and insulationApply durable and well-aligned battening for the VinyPlus facade panels. The thicknessmust be at least 20 mm and the width at least 48 mm. The battening is mountedon the surface at a centre-to-centre distance of 400 mm. Position the first battening from the corner at a maximumof 200 mm. The battens are renewed to the thickness of the aluminium mounting profile. Also make surethat any insulation or film does not bulge, making ventilation impossible. Make useof our Lamina building film, a high-quality watertight vapour-open film.
ShapeThe panels are available in tongue-and-groove, round-edge panel and opdekdeel versions. Roof-edge components are also available for roof-gutter covering among other things. VinyPlus® Working width Width Length ThicknessTongue-and-groove 150 mm 180 mm 6 m 18 mmRound-edge panel 150 mm 180 mm 6 m 18 mmOpdekdeel 120 mm 140 mm 6 m 35 mmRoof-edge panel 200 mm 200 mm 6 m 16 mmRoof-edge panel 295 mm 295 mm 6 m 16 mm
ImportantPlastics shrink or expand during temperature changes. This means that the VinyPlus profiles can also shrink and expand. Take this into account when finishing the cladding panels in the finishing profiles.
For construction work, the ‘Basic principles of the constructive design in accordance with the NEN-EN 1990 Eurocode’ must always be taken into account.
Mounting instructionsYou can download the extensive instruction leaflet from the website www.milin.nl and www.VinyPlus.nl.
DurabilityThe expected product life is 30 years.
Technical specifications1. Weight 7.9 kg/m²2. Density 1.4 g/cm³ DIN 534793. Tensile strength ≥ 35 N/mm² DIN 534554. Bending strength ≥ 75 N/mm² DIN 534525. Expansion coefficient 0.060 mm/m/0C DIN 537526. Fire classification Euroclass E EN 13501-1
Fire classificationAs standard the VinyPlus panels have a fire classification of Euroclass E in accordance with EN13501-1.
WatertightnessVinyPlus® cladding panels and associated profiles are 100% waterproof. Once assembled, watertightness is optimised in part by the water barrier in the panels.
ChangesThe material is not affected adversely by atmospheric gases, and is not affected by fluids in normal use. Can safely be treated with ammonia and non-abrasive cleaning agents. Impenetrable and waterproof. Also has good resistance to alkaline chemicals and acids. Not resistant to solvents.
Environment• Composition is not hazardous to health or the environment;• Lead, barium, cadmium are NOT used in manufacture;• Fully recyclable;• Complies with the Dutch Sustainable Building (DuBo) guidelines.
General Printing errors and changes in colours, packaging, dimensions, versions in this brochure are subject to change.
General information
Milin service from 60m2 no fewer than 50 additional textured film colours are available, including at your
desired fixed size up to a maximum of 7 metres. Finishing profiles in desired textured film are available
per 5 items.
It is possible to obtain VinyPlus facade cladding with higher fire classification. Get in touch with our sales
department to ask about the options.
18 19VinyPlus facade cladding and roof edging VinyPlus facade cladding and roof edging
tongue-and-groove4x6 m. Art. no.: 400
outer corner profile5x6 m. Art. no.: 401
connection profile5x6 m. Art. no.: 407
end profile5x6 m. Art. no.: 403
start profile vertical covering5x6 m. Art. no.: 413
mounting outer corner profile10x3 m. Art. no.: 402
mounting connection profile10x3 m. Art. no.: 408
fastening clip10 units Art. no.: 368
roof-edge mounting profile 1x6 m Art.no.: 369
fixing screws250 units Art. no.: 415
repair pen1 unit. Art. no.: 489
cleaner 1000 ml1 unit. Art. no.: 371
textured film colour chart1 unit. Art. no.: 487
start profile horizontal covering10x3 m. Art. no.: 404
ventilation closing profile6x6 m. Art. no.: 482
connection profile6x6 m. Art. no.: 481
drainage profile10x6 m. Art. no.: 488
ventilation profile10x5 m. Art. no.: 423
mounting end profile10x3 m. Art. no.: 406
tongue-and-groove butt joint
connection10 units Art. no.: 409
round-edge butt joint
connection10 units Art. no.: 485
tongue-and-groove end cap10 units Art. no.: 405 roof-edge panel 200x35x16
2x6 m Art. no.: 473 seating profile5x6 m Art.no.: 347
connection5x6 m Art.no.: 352
outer corner5x6 m Art.no.: 351
roof-edge panel 295x35x162x6 m Art. no.: 470
round-edge end cap10 units Art. no.: 486
18018
round-edge panel4x6 m. Art. no.: 480
18018
opdekdeel4x6 m. Art. no.: 483
18150
180
18150
180
50
25
32
12
35
25
5612
453
18
40
2550
20
20
35
200/295
16 35
10
50 20
16
35
32
GEVELBEKLEDING EN DAKRANDEN
Tongue-and-groove Accessories
Roof-edge panels
Accessories
Finishing profiles
Round-edge Opdekdeel
Finishing profiles
fixing screws250 units Art. no.: 415
repair pen1 unit. Art. no.: 489
cleaner 1000 ml1 unit. Art. no.: 371
GEVELBEKLEDING EN DAKRANDEN
140
35
89
38
59
63
38
45
30040
35
3538
300
30
6
9
50
16,5
A product from Milin B.V.
www.vinyplus.nl
dealer:
Characteristics• 100% recycled plastic
• Environmentally-friendly
• Low-maintenance
• High-quality product
• Colour fastness
• UV-resistant
Protect and beautify your home
FACADE CLADDING AND ROOF EDGING
07/2
018