Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
HIGH PRESSURE WASHER
System Features
■
■
■
■
■ Modes switchable between AUTO and MANUAL
Completely new design of DIAMOND SYSTEM of Logic Circuit and Sensor, avoidingthe disadvantage of traditional pressure sensor control system like starting machinefrequently and repeatedly under the circumstance of pipe water leakage
DIAMOND SYSTEM which is able to detect pump abnormality like running withoutwater, then blinking red light and the AUTO (automatic shutdown) mode being lockedto prevent pump from damage
DIAMOND SYSTEM with yellow light alert which could blink and make AUTO modelocked in order to remind users of the need to change oil when the pump has run for300 hours
Combined with both stylish design and practical values such as simplicity, toughness,durability and aesthetics
A masterpiece of high pressure washerbased on decades of accumulativeexperience from users
■
■
■
■
■
■
產品特色Product Features
Cage-shaped frame combined with springs and rubber mountings, able to effectivelyeliminate the noise caused by high-frequency vibration of outer case
Motor baseboard bridging the tube frame, which could prevent the board from gettingbroken and falling off because of rustiness on welding connection
Folding handle which makes it easy to be stored and transported
High pressure hose quick-fit coupling which makes it easy to connect and disconnect
ABS outer case which is UV-resistant and proved to be tough and durable by accordingto CAE analysis
Open frame based on antirust concept, which makes it efficient to remove moisture as well as convenient to conduct routine maintenance
※ All engine-type models are equipped with spray gun, inlet hose, high pressure hose and operation manual.
■
■
■
■
■
AR-RKA Series Pumps
Gear BoxPA-B AS-100 Easy Starter
5.5 HP High Pressure Washer with Engine
※ All engine-type models are equipped with spray gun, inlet hose, high pressure hose and operation manual.
13 HP High Pressure Washer with Engine
Engine Throttle ControllerERSReducing pump RPM when pump isin by-pass in order to reduce fuelconsumption and engine wear.Prolong pump life by reducingpotential fluid heat build-up. InstantON/OFF response eliminatingpressure delays at gun opening.◆Rated Pressure: 250 bar◆Actuating Pressure: 15 ~ 50 bar◆Rated Temperature: 90°C◆Stroke: 7~10 mm◆Coupling Type: G 1/4 M
Using Honda GX series petro engines
Equipped with RL-30 spray guns in all models of TAR cleaners
Installed with inlet filter at the pump inlet
High mobility due to the durablepolyurethane (PU) wheels
Installed with indicator of insufficient oil alert
Product Features
It is suitable to be installed atthe inlet and outlet pipe lines ofhigh pressure pump. Relievespressure in pump dischargeline during start-up phase.Special stainless steel seat andball, provides thousands of lowpressure start-up.◆Max. Flow: 30 L/min◆Rated Pressure: 280 bar◆Rated Temperature: 80°C◆Coupling Type: G 3/8 M
※Installed on models withpressure higher than 250 bar
◆ This gearbox allows a quick,direct and compact couplingPump-Engine unit.◆The gears at helical toothing,with independent lubrication in oilbath, are made in premiumquality steel hardened withcementation treatment for anoiseless running and extendedlife.
※Universal flange for enginecoupling to different models ofengines on the market.
AR-RKA pumps are designed specificallyfor high pressure cleaning application.They are constructed of die-cast bodiesand featured for a forged brass head andspecial thick solid ceramic plungers, whichbring up their long life and durability.
ACCESSORIESHigh Pressure Hose
High-pressure hose specifically designed for high pressure washerwhich has the inner rubber with water resistance and the outerrubber embedded with the hard steel wires possess excellent wearresistance and pressure resistance. It is suitable for clean water atroom temperature.◆ Operating Temperature : 0 ~ 80°C◆ Rated Pressure: 220 bar for monolayer and 350 bar for bilayer
◇ We offer monolayer or bilayer high pressure hose of 5/16”and 3/8”. There are 10m, 30m, 50m or other options ofspecified lengths..
◇ The hose will include standard coupling for delivery.
AGV 20- Unloader Valve
At gun shut off, the water flow is bypassed at reduced pressure,which could protect pump structure and relevant parts. Design ofinternal by-pass which leads to water inlet site directly.◆Max. Flow: 30 L/min ◆Rated Temperature: 60°C◆Rated Pressure: 220 bar ◆Coupling Type: G3/8 FF
FP-1 Sensor of Pressure and Flow 2-in-1
The patent design of our company for sensing both pressure andflow integratively. It will provides microcomputer control panel withsignal of logic judgment regarding pressure output variation andwater in flow path.◆Max. Flow: 30 L/min ◆Rated Pressure: 280 bar◆Rated Temperature: 80°C ◆Coupling Type: G 3/8 M
AGV 30- Unloader Valve
At gun shut off, the water flow is bypassed at reduced pressure,which could protect pump structure and relevant parts.◆Max. Flow: 45 L/min ◆Rated Temperature: 60°C◆Rated Pressure: 220 bar ◆Coupling Type: G3/8 FF
Microcomputer Control Panel
This panel is integrated with FP-1 sensor of pressure and flow 2-in-1 into DIAMOND Automatic Shutdown System which isdeveloped by TANONG ourselves. This system has multi-modesof control and protection, suitable for high frequency of exchangebetween STOP and SPRAY.
VB 9- Unloader Valve
Pressure regulating unloader valve with port for pressure gauge.At gun shut off, the water flow is bypassed at reduced pressure,which could protect pump structure and relevant parts. It isdurable and especially suitable for heavy-load operation.◆Max. Flow: 30 L/min ◆Rated Temperature: 60°C◆Rated Pressure: 220 bar ◆Coupling Type: G3/8 FF
Engine Adapter
It is suitable to be linked to high pressure pump of AR RKA 2.88G25KDX series and HONDA GX 5.5HP engine.
RL30 Spray Gun
It is durable and especially suitable for heavy-load operation. Theswivel of this gun could prevent high pressure hose from beingintertwined inappropriately.◆Max. Flow: 40 L/min ◆Rated Temperature: 90°C◆Rated Pressure: 310 bar ◆Coupling Type: G 3/8 F,G1/4F
Motor-Pump Adapter
It is suitable to couple various motors with NDX high pressurepump of AR RKA.
RL300 Spray Gun
The spray gun of RL30+ 400mm tube is very durable andespecially suitable to be utilized under heavy load operation. Theswivel of this gun could prevent high pressure hose from beingintertwined inappropriately.◆Max. Flow: 40 L/min ◆Rated Temperature: 90°C◆Rated Pressure: 310 bar ◆Coupling Type: G 3/8 F,M22 F
Inlet Filter
Light-weighted filter specific for TAR series, which could helpusers to judge if it is clogged via transparent case. The filtrationnet could stop large substances which are likely to imposedamage on the parts of pump.
UR25 Rotating Nozzle
Light-weighted ceramic rotating nozzle, able to enhance washingand cleaning efficiency.◆Min. and Max. Flow: 6 ( at 80 bar )~ 29 ( at 250 bar ) L/min◆Rated Pressure: 250 bar ◆Min. Operating Pressure: 80 bar◆Operating Temperature: 5 ~ 100°C ◆Coupling: G 1/4 F
AJN Nozzle
Adjustable nozzle, the spray can be adjusted into fan-shaped orstraight water column by rotating the nozzle body, pushing therotary nozzle body forward can make it enter low-pressure state, itis suitable for suction detergent.◆Max. Flow: 21 L/min ◆Rated Pressure: 220 bar◆Rated Temperature: 60°C ◆Coupling: NPT 1/4 F( TANONG provides the following specification: 035/040/045 )
Stainless Steel Tube
Users could choose the SS-304stainless steel 1/4” tube of the variouslengths of 38, 50, 100 or 400mm. Thereare another choice of straight or bendingtube at the end of nozzle ( only for 400mm tube ).
Specification
Authorized Dealers
TAR-B-12/120 M1 TAR High Pressure Washer of wall mounting type
Model Flow RateL/min
Operating Pressure
bar
Motor Power
HP
Electrical Specification
TAR 12/120 M1 12 1203 HP
220V/380V60Hz
TAR 12/120 M3 12 120TAR 12/180 M1 12 180
5 HPTAR 12/180 M3 12 180TAR 17/120 M1 17 120TAR 17/120 M3 17 120TAR 15/200 M3 15 200 7.5 HPTAR 15/250 M3 15 250
10 HPTAR 17/230 M3 17 230
Petrol EngineTAR 12/150 E 12 150 GX 160 ( 5.5 HP )TAR 17/270 E 17 270 GX 390 ( 13 HP )