HIGH PRESSURE TRUE AEROPONICS PARTS LISTBy aeroponicsDIY.com

1 Yellow Standard Wire Nuts 25pk

Below is a list of parts and items you need to build a reliable true high pressure aeroponics system. You can locate most of these things at your local hardware store.

2 Burial sprinkler wire 18/5 50’

3 Xtreme 120-quart Cooler

4 Large plastic tub

5 3-gallon black bucket

6 Pipe Schedule 40 2.5 in and 2 in

7 Food Grade FDA Chaulking

8 John Guest Quick Connect90° Degree Elbow 1/4"

9 30' High Pressure Poly 1/4" NSF Tubing

10 10 Mesh Pot Net Basket+ Clone Cloning Collar Foam Insert

11 100% Cotton Cheesecloth

12 John Guest Quick Connect UnionTee 1/4" Connector

13 1/4" 24VAC Electric Solenoid Valvewith Push-In Connectors

14 12V 2A Power Supply AC withDC Female Connector

16 Pressure Tank 2 Gallon

15 The Pump assembly includes:

17 Inline Ball Valve

- Pump: Aquatec 8800 series pump

- Reducer fitting: two reducer fitting 3/8" to 1/4", the pump has input/output of 3/8"

- Transformer: Aquatec brand transformer, 115VAC to 24VAC, 2 Amp.

- Pressure switch: 100psi to make the pump and RO system function automatically.

- Solenoid valve: turn it off, and turn on water when it is making water.

- Pressure gauge: to indicate pump output pressure

18 High Pressure Aeroponic Filter 1/4″

19 1/4″ Quick Connect BioplasticY-Adapters NSF

20 1/4" Quick Connect Bulkhead Unions

21 Angled Aeroponic Misting Nozzles

22 Interval Timer

23 APC Back-UPS ES 8 Outlet550VA 120V

24 Drip 1/2" Barbed Elbows

25 Drip Irrigation 1/2" Barbed Tee for Poly Tubing

26 1/2" tubing pre-cut

27 1/16" Hex Key L-Wrench Allenfor pump

28 1/2” Pipe insulation

Please note: This parts list will be updated and revised as system improvements are made. A complete parts description and parts source is also available at aeroponicsDIY.com

29 Ball Valve to 1/4 OD tubing, for use with pressure storage tank

Patent Pending