High Power EDFA, 1550nm ~ C-BandTurn-Key Polarization Maintaining High Gain Amplifier

• 1 Watt and 10 Watt Models Available

• Polarization Maintaining Fiber (non-PMmodel also available)

• User Control of Current Level to Inter-nal Pump Laser Diodes

• Includes Loss of Input Power Detectionwith Pump Shut-Down Safety Features

• Low Noise, High Polarization ExtinctionRatio

• High Gain: > 30 dB

AMN-EDFA-XW DATA SHEET

manufactured by

AMN-EDFA-XW Product OverviewThese high power EDFA instruments are 1550nm range C-band erbium (1W) doped and erbium-ytterbium (10W) doped fiber amplifiers which offer up to 10 Watts of output power. They are simple to operate, affordable benchtop instruments for laboratory research or manufacturing test applications. These units provide full control over the power and gain through user control of the internal 976nm pump laser diode current levels, or by setting the instrument into a gain feedback or power feedback mode. Settings can be made through an easy to use front panel with an intuitive menu and control knob or by remote interface. LabVIEW based control software is available and ships free of charge. Please contact us if you would like to view the Operating Manual or see the remote interface command set.

manufactured by

AMN-EDFA-XW SPECIFICATIONS

1 WATT MODEL: AMN-EDFA-1W (1W OUTPUT POWER)Output Saturation Power (@0 dBm input power): > +30 dBm

Optical Gain @ -40dBm: > 30dB

Optical Gain @ -10dBm: > 20 dB

Noise Figure @ -20dBm: < 4.3 dB

Operation Wavelength: 1535nm - 1563nm

Input Isolation: > 30 dB

Output Isolation: > 30 dB

Polarization Dependent Gain: (typ) 0.3 dB

Polarization Dependent Gain: (max) 0.5 dB

Polarization Mode Dispersion: < .3 ps

User Set Control Mode 1: ACC (pump current)

User Set Control Mode 2: APC (power feedback)

Polarization Extinction Ratio: > 20 dB

Power Adjustment Step Size: 0.01 dBm

Dimensions: 260mm x 330mm x 120 mm

Gain Medium: Erbium Doped Fiber

10 WATT MODEL: AMN-EDFA-10W (10W OUTPUT POWER)Output Saturation Power (@10 dBm input power): > +40 dBm

Optical Gain @ -10dBm: > 30 dB

Noise Figure @ -20dBm: < 6 dB

Operation Wavelength: 1545nm - 1563nm

Input Isolation: > 30 dB

Output Isolation: > 30 dB

Polarization Dependent Gain: (typ) 0.3 dB

Polarization Dependent Gain: (max) 0.5 dB

Polarization Mode Dispersion: < .3 ps

User Set Control Mode 1: ACC (pump current)

User Set Control Mode 2: APC (power feedback)

Power Adjustment Step Size: 0.01 dBm

Gain Medium: Erbium Ytterbium Doped Fiber

manufactured by

AMN-EDFA-XW SPECIFICATIONS

USER INTERFACE (ALL MODELS)Alphanumeric Color Front Panel Interface w/ Adjust Knob

Remote: RS232, LabView Control Software Included

Remote: RJ-45 (TCP/IP Ethernet optional)

Optical Connectors IN/OUT: FC/APC

Optical Fiber Options: PM fiber, (SMF-28 optional)

GENERAL SPECIFICATIONS (ALL MODELS)Operation Temperature: 0 to 40 ℃

Required Shore Power: 90-240 (VAC), 47-63 Hz

Dimensions (1 Watt): 260mm x 330mm x 120mm

Dimensions (10 Watt): 485mm x 615mm x 150mm

Power Monitoring: Output Power (Input Power Optional)

Remote Control RS2323 Port: DB-9 female

TCPIP/Ethernet optional

Protection: Pump Lasers (TEC) Over-Temperature

Protection: Pump Lasers Current Limit

Optical Fiber: PMF Panda 1550nm PM Fiber

Connectors: APC (Others Available on Request)

Safety Control 1: Key-Lock Switch

Safety Control 2: BNC Interlock

Safety Control 3 (10 Watt): e-Stop

Safety Control 4: Loss of Input Power Detection and Pump Shut Down

APPLICATIONSLaboratory R&D

SONET/SDH System

Optical Communications

Fiber Optic Sensing

CATV

manufactured by

manufactured by

manufactured by

manufactured by