MAKE HIGH PERFORMANCE MILLING A REGULAR HABIT

HIGH FEED 6

SECOPRODUCTSUMMARY

HIGH FEED MILLING

Efficiently tackle a variety of difficult-to-machine materials from stainless steel to heat-resistant superalloys with Seco’s High Feed 6 – the latest addition to our High Feed series of indexable-insert milling cutters. The new cutter features a design created specifically to boost material removal rates and handle high chip loads to achieve high performance and exceptional tool life.

Optimize all high feed machining applications, including face milling, slotting, contouring, plunging, with the High Feed 6. Its large-diameter cutter bodies are capable of 0.070” (1.8 mm) axial depths of cut and feature double-sided inserts with six cutting edges for unsurpassed material removal and low operating costs.

High Feed 6 inserts mount at low lead angles to create axial rather than radial cutting forces, which lets tools experience less vibration and provide long, predictable performance.

RANGE OVERVIEW• Cutter diameters range from

2.00” - 4.00” (50mm - 160mm)• ME13, M15 and MD17 insert

geometries• MP1500, MP2500, MP3000,

MM4500, MK2050, MS2050, MS2500, T350M and F40M grades available

• Available in normal and close-pitch cutter versions

KEY BENEFITS• Excellent cutting behavior• Increased tool life• Highly stable performance• Low operating costs• Unsurpassed material removal• Application versatility

V-shaped cutting edge ensures optimal positioning

6 cutting edges

Inserts mount to cutter bodies at low lead angles for reduced vibration

Large diamenter cutter bodies

Visit SECOTOOLS.COM for more info

P-1803-2000 GT18-505 High Feed 6 Product Summary

Copyright © 2018 Seco Tools, LLC. All rights reserved.

INDUSTRY TARGETS • Aerospace

• Mold & Die

• Oil & Gas

• Power Generation

INDUSTRY APPLICATIONS• Mold & Die: The M15 geometry combined with the MP1500 steel grade

is a first choice for moldmaking• Aerospace: The ME geometry combined with the MS2050 titanium grade is an

excellent choice for frames, spars, etc.• Oil & Gas: Most of the materials used in the oil and gas industry tend to wear

tools quickly which is why the M15 geometry combined with the MP2500 steel grade is a top choice for these diicult materials

SECOPRODUCTSUMMARY

HIGH FEED MILLING

MATERIAL GROUPS

Steel P1-P11

Stainless Steel M1-M5

Cast Iron K1-K7

Superalloys S1-S3

Hardened Steels H5-H21

BOOST MATERIAL REMOVAL RATES IN A WIDE RANGE OF APPLICATIONS

FEATURES ADVANTAGES BENEFITS IMPACT

Double sided trigon-

shaped insert

Multi-edge, highly economical

solution with high performanceReduced cost per edge

How would an economical solution affect your

manufacturing costs?

Strong insert cross section Stronger insert Reliability in the machining processHow would a strong and reliable process affect

your manufacturing process?

Raised cutting edges Light cutting action Lower power consumption How would a reliable free cutting process that uses less

power affect your machine?