High Efficiency Boilers & Accessories · Why choose a Glow-worm? 04 – 05 Ultracom high efficiency condensing boiler 06 – 09 Flexicom high efficiency condensing boiler 10 – 13

High EfficiencyBoilers & Accessories

2

ContentsThis brochure has been developed to provide you with all the information you could ever want to know about the Glow-worm range of high efficiency boilers.

Either use the contents below to navigate straight to the exact information you are looking for, or sit down and have a good read of everything that we can do to create a perfect heating system for you, making your life warm and simple.

Contents 03

Why choose a Glow-worm? 04 – 05

Ultracom high efficiency condensing boiler 06 – 09

Flexicom high efficiency condensing boiler 10 – 13

Ultrapower sxi advanced system store 14 – 17

Xtramax HE high efficiency storage combi 18 – 19

Betacom c high efficiency combi 20 – 21

Controls and timers 22 – 25

Hot water cylinders 26 – 27

Accessories: plume & condensate solutions 28 – 29

Renewable technologies 30 – 31

Glow-worm service 32 – 33

Market leading training 34 – 35

Technical data 36

The Ultracom range 36 – 41

The Flexicom range 42 – 45

The Ultrapower range 46

Xtramax HE 47

Betacom c 47

Cylinders 48 – 49

Product dimensions & clearances 50 – 51

Flueing 52

Horizontal flueing options 52

Vertical flueing options 53

Twin flueing options 54

Direct rear flueing options 55

Flueing accessories 55

Control options 56 - 57

3

4

Why choose a Glow-worm?

Our product range is clearly defined to meet the needs of a wide range of UK homes. With universal flueing systems, diagnostics, user controls and installation accessories, once you have installed and used one Glow-worm appliance, it’s easy to install and use them all.

As part of the world’s largest heating manufacturing group, we use our extensive skills and expertise to ensure each of our products are produced to the highest standards. Constant product development and innovative manufacturing practices create first class, quality products, which are constantly being re-affirmed by independent institute tests – so you don’t just have to take our word for it.

As well as providing durable, reliable products Glow-worm supports you from the beginning of your installation to the end of the product life - 10, 15, 20 years into the future. From design, technical help, extensive training courses and specialist onsite support to a nationwide after sales and spares network, Glow-worm provide you with expert help and support whenever you need it.

Over 75 years of commitment to top quality, reliability and exceptional durability have made Glow-worm one of the UK’s leading heating manufacturers. We have built our reputation on delivering products which are straightforward, dependable and designed with you in mind.

Today, Glow-worm not only produce award winning high efficiency domestic boilers, but we also offer intelligent controls, hot water cylinders and a range of renewable technologies all boasting low energy consumption reducing both your costs and your carbon footprint.

5

UltracomHigh efficiency condensing boilerProviding everyday family comfort

Busy families need a heating system that fully supports their lifestyle and provides perfect comfort levels. The stainless steel heat exchanger in the Ultracom range provides excellent heating and hot water comfort and boasts low energy consumption, reducing both your costs and your carbon footprint.

Available as a combi, open vent or sealed system appliance in a wide range of outputs, the Ultracom is SEDBUK A rated with a NOx Class 5 rating (the best possible) and has an ‘eco’ setting which provides a further level of energy saving.

Simple installationSimple installation is always at the heart of every Glow-worm appliance, the drop down wiring connections, extensive flueing options, inbuilt bypass and filling loop make the Ultracom easy and quick to install.

Inbuilt controlsThe stylish inbuilt back-lit digital controls provide 7-day or 24 hour, single or two channel control for the central heating and hot water function (hot water pre-heat function in the combi). The simple push button controls mean that it takes seconds to set and alter.

So whether you are a heating enthusiast who loves setting different programmes to warm your house according to your busy calendar or if you just want to set a programme once and forget that your heating system even exists, the Ultracom can provide the perfect easy to use every day support.

The ideal temperature

at all times.

For full information on

Glow-worm controls,

please turn to page 56

The Glow-worm

Ultracom hxi

was awarded the

Which? Best Buy

Award 2008

7

Ultracom cxi Ultracom cx

Ultracom hxi

High efficiency combination boiler withinbuilt digital programmer

Models available

24, 30, 38

Key features

• SEDBUK A & NOx Class 5

• 5 second hot water delivery(measured at tap 1m from boiler)

• Advanced diagnostics

• Inbuilt frost protection

• LPG compatible without conversion kit

• Timed pre-heat

• High modulation

• Bottom cover plate

• Optional upward piping kit

• Optional pre-fixing jig

• 2 Year Parts & Labour Warranty

Dimensions (h w d)(mm):

726 x 450 x 334

Maximum flue lengths

Horizontal 10m

Vertical 10m

Twin 40m

For detailed technical specification, see pages 36 - 41

High efficiency combination boiler withplug in analogue timer

Models available

24, 30

Key features






• High modulation






726 x 450 x 334


Horizontal 10m

Vertical 10m

Twin 40m

High efficiency open vent boiler with inbuilt digital programmer

Models available

12, 15, 18, 24, 30, 38

Key features





• High modulation




610 x 375 x 334


Horizontal 10m

Vertical 10m

Twin 40m

8

Ultracom sxiHigh efficiency sealed system boiler withinbuilt digital programmer

Models available

18, 30

Key features





• High modulation






726 x 450 x 334


Horizontal 10m

Vertical 10m

Twin 40m

9

10

FlexicomHigh efficiency condensing boiler Compact, flexible and hard wearing

Compact and flexible The thing about UK houses is that in a lot of cases there isn’t a lot of space for things like boilers. Lets face it you would rather have the extra cupboard space to store the multitude of “stuff” that a family gathers over time. That is exactly why the Flexicom was developed.

The Flexicom is compact enough to fit in a standard kitchen cupboard and was the first high efficiency boiler in the UK with a direct rear flue, meaning that if you are looking to remove a standard efficiency boiler with a direct rear flue, the Flexicom will easily replace it.

Available as a combi, open vent or a sealed system boiler with a wide range of outputs, the Flexicom is recommended by the Energy Saving Trust with a SEDBUK A and NOx class 5 rating.

Robust and simpleThe Flexicom provides a quick and simple installation with no need to remove the front casing during installation thanks to the pre-fixing jig, upward piping frame and the drop down connection block. The aluminium heat exchanger also has wide waterways which enable the Flexicom to easily cope with system debris that has built up over time - ideal for retro fit.

Compact, flexible and hard wearingCompact, flexible and hard wearing

Compact and flexibleCompact and flexibleThe thing about UK houses is that in a lot of cases there isn’t a lot of space for things like boilers. Lets face it you would rather have the extra cupboard space to store the multitude of “stuff” that a family gathers over time.That is exactly why the Flexicom was developed.

The Flexicom is compact enough to fit in a standard kitchen cupboard and was the first high efficiency boiler in the UK with a direct rear flue, meaning that if you are looking to remove a standard efficiency boiler with a direct rear flue, the Flexicom will easily replace it.

Available as a combi, open vent or a sealed system boiler with a wide range of outputs, the Flexicom is recommended by the Energy Saving Trust with a SEDBUK A and NOx class 5 rating.

Robust and simpleRobust and simpleThe Flexicom provides a quick and simple installation with no need to remove the front casing during installation thanks to the pre-fixing jig, upward piping frame and the drop down connection block. The aluminium heat exchanger also has wide waterways which enable the Flexicom to easily cope with system debris that has built up over time - ideal for retro fit.


at all times.

The optional glide down

timer on the Flexicom cx.


Glow-worm controls,

please turn to page 56.

11

Flexicom cxHigh efficiency combination boiler withoptional glide down timer

Models available

24, 30, 35

Key Features





• Pre-fixing jig



• Optional glide down timer



700 x 390 x 280


Horizontal 8m

Vertical 8m

Twin 20m

Direct rear 0.55m

Available with optional Direct Rear Flue.The first high efficiency boiler in the UK with an optional Direct Rear Flue -ideal for replacements.

Flexicom sx

Flexicom hx

High efficiency sealed system boiler

Models available

18, 30

Key Features




• Pre-fixing jig





700 x 390 x 280


Horizontal 8m

Vertical 8m

Twin 20m

Direct rear 0.55m

High efficiency open vent boiler

Models available

12, 15, 18, 24, 30, 35

Key Features







600 x 375 x 280


Horizontal 8m

Vertical 8m

Twin 20m

Direct rear 0.55m

For detailed technical specification, see pages 42 - 45 13

14

Ultrapower sxiAdvanced system storeComplete heating system in one box

Imagine if you could fit a complete heating system that provides endless heating and hot water for a large household in one floor standing appliance about the size of a small fridge freezer, it seems like an extraordinary feat of engineering, but that is exactly what the Ultrapower does.

One of the most efficient boilers in the UK as rated by SEDBUK, the Ultrapower provides endless hot water on demand through an innovative storage system with fast reheat times and combi back-up, all within a single appliance that fits in an airing cupboard.

Endless hot water on demand The innovative shift load storage system of the Ultrapower sxi generates hot water whenever a tap is turned on. By drawing on the internal storage system at the same time it can rapidly deliver the performance of a 170 litre cylinder.1

The Ultrapower sxi also utilises a much smaller hot water cylinder than a conventional system boiler, but because the boiler recharges the cylinder as the hot water is being drawn off. This means the Ultrapower sxi provides the same hot water performance as a much larger indirect cylinder.

Complete control atthe touch of a button In addition to the impressive hot water delivery the Ultrapower sxi has an inbuilt digital programmer providing 7 day or 24 hour, single or two channel control for the central heating and hot water pre-heat function which provide as much or as little flexibility as needed.


at all times.


Glow-worm controls,

please turn to page 56

Notes:

1 170 sxi model

15

Ultrapower sxiHigh efficiency system store delivering endless heating and hot water.

Models available

100, 170

Key Features

• SEDBUK A

• 5 second hot water delivery

(measured at a tap 1m from the boiler)


• NOx class 5


• LPG compatible

• Continua electronics

• Pre-fixing jig

• Drop down electrical connections

• Inbuilt programmer

• Back up immersion heater


• Condensate pump

• Outdoor sensor (optional)


Ultrapower 100 sxi


1260 x 575 x 600


Horizontal 8 m

Vertical 8 m

Twin 12 m

Ultrapower 170 sxi


1520 x 575 x 334


Horizontal 8 m

Vertical 12 m

Twin 40 m

16

10 MIN (100 sxi)17 MIN (170 sxi)The Ultrapower sxi reheat time is approximately 10 minutes for the 100 sxi and 17 minutes for the 170 sxi.

60˚

60˚

60˚

60˚60˚

0 MIN 2 MIN 4 MIN 6 MIN 8 MIN

The Ultrapower sxi reheat time is appr

0 MIN

Hot water performanceThe Ultrapower sxi heats the water stored in its cylinder directly, which makes it far more compact than an indirect cylinder.

Once the hot water stored has been depleted, the boiler operates as a normal combi, which means you never run out of hot water.

Quick reheat timesThe Ultrapower sxi recharges the cylinder as hot water is being drawn off, resulting in much faster reheat times compared to that of a conventional indirect cylinder.

Conventional Coilstore 200 Ltr.

200

150

100

50

0

Ultrapower sxistore 120 Ltr.

Ultrapower sxistore 80 Ltr.

Conventional Coilstore 100 Ltr.

For detailed technical specification, see page 46 17

18

Xtramax HEHigh efficiency storage combiSimplicity of combi with the flow rates of a sealed system With highly insulated modern houses, often our hot water demand hugely outweighs our heating requirements (even with the UK climate). The Xtramax is a wall hanging storage combi that can deliver an endless supply of hot water. Its innovative internal store lets you draw hot water from 2 or 3 taps at the same time and at much higher flow rates than you would normally expect from a combi.

Rated SEDBUK A with a NOx class 5 rating the Xtramax HE can generate up to 200 litres of hot water rapidly with a recovery rate of just 4 minutes.


890 x 700 x 480


Horizontal 5m

Vertical 5.5m

Twin 40m

Model available

33

Key Features

• SEDBUK A and NOx class 5

• 5 second hot water delivery

(measured at a tap 1m from the boiler)



• LPG compatible

• Delivers up to 200l hot water

(Dependent on optimized installation)

• Continua electronics



20

If you are looking for a no nonsense, simple high efficiency combi boiler, then the Betacom c is the ideal solution.

Highly cost effective solution Simple, affordable and reliable, this SEDBUK B combi range is easy to install and easy to operate with an inbuilt analogue timer and LED display for simple diagnostics. Available in 24 & 30 kW outputs the Betacom c suits small to medium sized properties.

Betacom cHigh efficiency combiSimplicity itself

Models available

24, 30

Key Features

• SEDBUK B

• Easy to use & install

• User-friendly LED display

• Inbuilt timer

• Factory fitted mains connection lead


• Pump & diverter anti-seize function

• Horizontal, vertical & twin flue options


24 c


720 x 405 x 330


Horizontal 5.6 m

Vertical 6.8 m

Twin 14.3 m

30 c


720 x 430 x 330


Horizontal 4.6 m

Vertical 5.8 m

Twin 11.5 m


Controls and timersOnce you have taken the time to choose your new Glow-worm boiler it soon becomes the reliable white box under the stairs, in the kitchen cupboard or in the airing cupboard.

However, the controls become part of your everyday life. It is extremely important that you pair your appliance with easy to use controls that enhance your heating system.

Glow-worm provide a wide range of controls designed for different homeowner needs, all with user friendliness at the heart. With simple push button controls, large screens and neat designs which are easy to use and look at home in any UK house.

All Glow-worm controls use Ebus protocol to talk directly to your Glow-worm boiler, enabling them to talk intelligently to each other. This creates more efficient heating systems that deliver savings on household energy bills and add 2% to SEDBUK values in the Code for Sustainable Homes when used for room (load) or weather compensation.

Intelligent room control explainedIntelligent room control is a simple method of controlling the flow temperature of water to the central heating system based on the temperature measured in the room.

As the temperature approaches the desired set point, the Glow-worm Climastat or Climapro/RF begins to lower the flow temperature of water supplied to the central heating system (radiators).

A lower flow temperature means that the boiler operates more efficiently in, or closer to the condensing mode. Energy costs are then reduced and a more stable and comfortable room temperature is achieved.

Weather compensation explainedWeather compensators work by measuring the temperature outside the property and adjusting the flow temperature from the boiler to the radiators accordingly. Meeting the needs of the actual daily heat demands of the property. The colder the outdoor temperature, the hotter the flow temperature to the radiators, conversely as the weather improves and becomes warmer outdoors, the cooler the flow temperature to the radiators. This ensures that the boiler is operating as efficiently as possible whilst still keeping the temperature in the house comfortable.

23

Your desired temperature -at the touch of a button

Compatibility table The table below summarises the compatibility of the Glow-worm boiler range with our range of intelligent controls. For more detailed control option information turn to page 56.

Climastat Climapro Climapro RFOutdoor Sensor

Glide down analogue

timer

Plug in analogue

timer

Options Board

Smart Wiring Centre

Ultracom cxi P P P P O O O OUltracom cx P P P P O P O OUltracom hxi P P P P O O P PUltracom sxi P P P P O O P PFlexicom cx P P P P P O O OFlexicom hx P P P P O O O PFlexicom sx P P P P O O O PUltrapower P P P P O O O OXtramax O O O O O O O OBetacom c O O O O O O O O

Flexicom cx

With optional glide

down analogue timer for

simple timed control

24

ClimastatTemperature only

Key Features

• Extra low voltage

• Simple & discreet 2 wire connection

• Polarity not important

• Easy to use

ClimaproProgrammable room thermostat time and temperature

Key Features

• 2 channel controller for central heating and hot water

• Provides 24 hour or 7 day timed programme options


• Simple & discreet 2 wire connection


• Easy to use

Climapro RFWireless programmable room thermostat time and temperature

Key Features

• Wireless

• Works with RF receiver connected to the boiler

• 2 channel controller for central heating and hot water

• Provides 24 hour or 7 day timed programme options



• Easy to use

Smart Wiring CentreIntelligent wiring centre

Key Features

• For use with Ultracom and Flexicom open vent and system boilers

• Ebus connection included

• Controls one HW zone and one CH zone

• Simple colour coded connectors

Options BoardSimple add on relay board

Key Features

• For use with Ultracom range

• Enables on/off functionality of digital programmer inUltracom hxi or Ultracom sxi

• Simply clips to the PCB board at installation

Outdoor SensorWeather compensation sensor

Key Features

• Enables weather compensation

• Wired sensor

• Simple and discreet

25

26

Stainless steel,indirect hot water cylinders

Single coil cylinders –for traditional heating systems An integral part of any open vent or sealed system, Glow-worm cylinders are extremely reliable, hard wearing and come complete with a 25 year warranty against perforation of the steel shell.

They are available in six sizes - 115, 150, 175, 200, 250 and 300 litres and manufactured from high grade stainless steel with laser welded seams.

Our cylinders are built with efficiency and performance in mind, and incorporate excellent insulation that achieves heat loss as low as 1.7kWh/24hrs and a high recovery heating coil that reheats the cylinder in as little as 20 minutes.

Twin coil cylinders –for renewable heating systems Glow-worm’s twin coil cylinder has one coil which heats water using power from the boiler and the second coil which heats water using energy from a solar panel. Whether you are installing a solar system now or simply preparing for the future, Glow-worm twin coil cylinders are fully compatible with any open vent or sealed system boiler and fit easily through any standard airing cupboard door.

Special construction of the coils inside the cylinder ensures that the top 2/3 of the cylinder is heated first enabling high volumes of hot water to be delivered on demand and the thermostatic mixing valve mix cold water into the solar heated water to achieve the required temperature for safe water usage.

Key Features

• Single coil available in115, 150, 175, 200, 250 & 300 litres

• Twin coil available in 200, 250 & 300 litres

• High grade stainless steel cylinder with laser welded seams

• Insulation meeting CheSS best practice as low as 1.7kWh/24hrs1

• High recovery heating coil –just 20 minutes

• External expansion vessel supplied

• Covered controls and wiring box

• Simple maintenance – no anode required

• High flow rates achievable working at 3.5bar pressure

• 25 year warranty on cylinder shell

Notes:

1 Attainable with 115l single coil model

27

Fully compatible with all Glow-worm boilers, these handy accessories help solve pluming and condensate issues that can be faced when installing modern condensing boilers.

Plume Management KitThis clever accessory exhausts plume further away from the duct, reducing the visual impact of the vapour trail. The simple piping kit fits neatly onto the horizontal flue and can be extended to a maximum of 6m in length, fitting easily round ledges and other obstacles to achieve minimum clearance levels required on installations.

Plume Deflector KitA useful accessory takes the hassle out of flue gas termination by diverting plume left, right or upwards away from problem zones such as adjacent properties or walk ways.

Available in black or white, the Plume Deflector Kit can be installed quickly and simply onto a horizontal flue instead of the standard terminal end piece during or after installation.

Accessories:Plume & condensate solutions

28

Condensate PumpTo solve problems associated in locating a suitable outlet to drain away condensate from the condensing boiler, the Glow-worm Condensate Pump collects the condensate from the boiler and pumps it into the waste system.

The smallest available in the UK, the Glow-worm Condensate Pump operates at maximum efficiency with the reservoir pump discharging the condensate in one go when the fill level is reached, rather than as a continuous operation.

Ridge Tile TerminalThe Ridge Tile Terminal accessory is designed to make the roof finish look neater and less obtrusive. Available in a black enamel finish, the ridge tile accessory can be fitted to purpose designed flue outlet ridge tiles and provides a quick and easy design solution.

Take the step intoRenewable technologies

There are lots of different types of renewable energy solutions to choose from in the UK – solar thermal, air source heat pumps, ground source heat pumps, biomass, micro CHP, solar photovoltaics (pv). The list is growing on an almost daily basis as new technologies are developed. All have different strengths and weaknesses, capital costs, payback periods and carbon savings.

Glow-worm can help you navigate through all these different choices and create a renewables solution that meets your needs whether you are interested in the technology because you want to reduce your own carbon emissions or you are meeting stringent government legislation.

Practical and straightforwardsolutions Building on our knowledge of UK heating systems and our worldwide experience of renewables technologies as part of the world’s largest heating manufacturing group. At Glow-worm we specialise in the most practical and straightforward solutions that are ideally suited to the average UK house:

• Clearly Solar - Solar thermal

• Clearly Heat Pumps - Air to water heat pumps

• Clearly Heat Recovery -Mechanical ventilation with heat recovery

All supported from beginning to end by Glow-worm’s experienced pre and after sales services, including advanced project support, design service, training, assisted commissioning and expert after sales support. Glow-worm assists you to make the right choices and support you in this new world of heating and hot water technologies.

All have different strengths and weaknesses, capital costs, payback periods and carbon savings.

Glow-worm can help you navigate through all these different choices and create a renewables solution that meets your needs whether you are interested in the technology because you want to reduce your own carbon emissions or you are meeting stringentgovernment legislation.

31

Expert support from start to finishAs well as providing durable, reliable and highly efficient products, Glow-worm supports you from the beginning of your installation to the end of the product life - 10, 15, 20 years into the future. From design, technical help, extensive training courses and specialist onsite support to a nationwide after sales and spares network, Glow-worm provide you with expert help and friendly support whenever you need it.

32

Top-class service

Technical helpIf you are planning or even in the middle of an installation and have a technical question you need answering, simply call our technical help line for a straightforward answer.

System designGlow-worm’s design is the complete design service tailored to suit your individual site requirements. From basic heating designs to more complex solutions using the latest renewables technologies, Glow-worm design uses state of the art CAD technology to provide high quality designs supported by full indemnity cover.

Full local supportOur nationwide sales team provide installers and specifiers with support and partnership from beginning to end.

Nationwide after sales serviceWe are committed to supporting you with technical help and after sales service online, over the telephone and on the road.

All our service engineers are Gas Safe registered and are fully trained on all Glow-worm’s models past and present. We have around 230 engineers based across the UK, each carrying over 1,500 different spare parts in their van enabling them to achieve an outstanding 97% first time fix rate.

Product warrantyAll Glow-worm products are designed to exacting industry standards, and are individually tested to ensure reliability. A-rated products come with 2 years parts and labour warranty as standard. All B-rated products have 1 year parts and labour warranty as standard with extended warranty options available.

Spares If in the unlikely event a problem occurs and a spare part is needed, then you can rest assured that Glow-worm’s market leading spare parts division will have the item you require. Thanks to our commitment towards maintaining functional spare parts, availability is for up to 15 years after the range production ends. Glow-worm has a nationwide network of over 30 key spares stockists at approximately 450 locations around the UK which means getting hold of the part is as convenient as possible. If for any reason the items are not held by the stockist, Glow-worm offers a next day delivery service for emergency orders.

Online information If you want standard technical advice information such as installation manuals and flueing information and don’t want to spend time on the telephone, visit our website at www.glow-worm.co.uk where you will find comprehensive technical information, solutions to common installation, system problems and advice on energy saving.

Always within reach,always there for you

Head Office:01773 824639

Literature: 01773 596105

After Sales Service01773 828100

Technical Advice:01773 828300

Glow-worm design:0116 2392393

Spare Parts:01773 596188

33

34

Market leading trainingHere at Glow-worm, we believe that knowledge is power. This is why we offer a range of courses to keep you up-to-date with new technologies and industry regulations. Each year Glow-worm provides straightforward, industry leading no-nonsense training for thousands of professionals.

With state-of-the-art training facilities located throughout the UK and each course only taking one or two days to complete, minimum time is taken away from the job. Our training is delivered by fully qualified practitioners in a relaxed and informal environment supported fully by reference materials and technical data sheets which you will take away with you and we won’t let you go hungry as lunch and all refreshments are provided.

For more information on Glow-worm training courses, please contact:

Telephone01773 [email protected]

Ultracom product range training1 day £40.00 per person inc VATFull training on the Glow-worm Ultracom range of high efficiency condensing boilers.

Flexicom product range training1 day £40.00 per person inc VATFull training on the Glow-worm Flexicom range of high efficiency condensing boilers.

Energy Efficiency for Domestic Heating1 day £141.00 per person inc VATUp-to-date information and training on technical system design, installation and regulations. Certificate in Energy Efficiency for Domestic Heating awarded on completion.

G3 unvented cylinder training 1 day £158.60 per person inc VATG3 is a mandatory qualification that you must hold when installing unvented cylinders. At the end of this 1 day course you will be fully qualified to work with unvented cylinders. A G3 unvented qualification must be held before taking a BPEC course.

Clearly Solar product training1 day £40.00 per person inc VATFull training on the Glow-worm Clearly Solar range, including insight into general solar thermal theory.

Solar BPEC course2 day £411.25 per person inc VATIntensive hands on course providing in-depth training on all domestic solar thermal systems including roof work. The course is certified through an examination at the end of the two days, providing you with a BPEC solar accreditation which is required to gain MCS approval.

Clearly Heat Pumps product training 1 day £40.00 per person inc VATFull training on the Glow-worm Clearly Heat Pumps range, including insight into general heat pumps theory.

Clearly Heat Recovery product training 1 day £40.00 per person inc VATFull training on the Glow-worm Clearly Heat Recovery range, including insight into general mechanical ventilation with heat recovery theory.

Training centres

Boiler System & RenewablesTraining Centres

Elland (Near Leeds)Belper (Near Derby)BristolSlough

Boiler System Training Centres

Fife GlasgowNorwichCaerphillyExeterSittingbourne

For more information on Glow-worm training courses, please contact:

TelephoneTelephone01773 [email protected]

Elland (Near Leeds)Belper (Near Derby)BristolSlough

Boiler System Training Centres

Fife GlasgowNorwichCaerphillyExeterSittingbourne

35

The Ultracom rangeUltracom cxi specifications - Combi

Ultracom 24cxi 30cxi 38cxi

SizeCasing dimensions (h w d)(mm) 726 x 450 x 334 726 x 450 x 334 726 x 450 x 334

Weight (packed) 45kg 47kg 48kg

PerformanceCH output (kW) Min/Max 5.0/18.0 5.0/22.9 6.6/30.0

DHW output (kW) Min/Max 5.0/24.0 5.0/30.0 6.7/38.4CH condensing Max output (kW) 20.0 24.7 32.2DHW flow rate l/min. 35°C rise 9.8 12.3 15.5DHW response1 5 seconds 5 seconds 5 secondsSEDBUK rating A A ASEDBUK % 90.3 90.3 90.4NOx class 5 (natural gas) Yes Yes YesAdjustable to LPG Yes Yes Yes

ConstructionMain heat exchanger type Coiled tube Coiled tube Coiled tube

Heat exchanger materialStainless

steelStainless

steelStainless

steel

Burner type Pre-mixed Pre-mixed Pre-mixedFully modulating Yes Yes YesDHW plate heat exchanger Yes Yes YesIntegrated hydrobloc Yes Yes Yes

InstallationSuitable for sealed systems Yes Yes Yes

Suitable for open-vent systems No No NoFilling loop Integral Integral IntegralFlow restrictor Yes 8 l/min Yes 12 l/min Yes 16 l/minInbuilt system bypass Yes Yes YesInbuilt condensate trap/siphon Yes Yes YesInbuilt boiler frost protection Two stage Two stage Two stageContinua electronics Yes Yes YesZero compartment ventilation Yes Yes Yes

Notes:

1 1 metre from the tap

2 This can be reduced to 5mm for removable panel

36

Ultracom cxi specifications - Combi (Continued)

Ultracom 24cxi 30cxi 38cxi

ClearancesTop (mm) (from top of boiler) 150 150 150

Side (mm) 20 20 20Bottom (mm) 200 200 200Front (mm)2 600 600 600

User InterfaceUser display Digital Digital Digital

Diagnostics Advanced Advanced AdvancedUser adjustable CH temp control Yes Yes YesUser adjustable DHW temp control Yes Yes YesEco setting on DHW Yes Yes YesInbuilt Programmer Yes Yes YesPrefixing jig with DIN layout Optional Optional OptionalOptional rear piping kit Yes Yes Yes

Pipes

Water connections2 x 22mm2 x 15mm

2 x 22mm 2 x 15mm

2 x 22mm 2 x 15mm

FluesMax horizontal 10m 10m 10m

Max vertical 10m 10m 10mMax twin flue (total air + flue) 40m 40m 40mOptional Plume Management Kit Yes Yes Yes

37

The Ultracom rangeUltracom cx specifications - Combi

Ultracom 24cx 30cx

SizeCasing dimensions (h w d)(mm) 726 x 450 x 334 726 x 450 x 334

Weight (packed) 45kg 47kg

PerformanceCH output (kW) Min/Max 5.0/18.0 5.0/22.9

DHW output (kW) Min/Max 5.0/24.0 5.0/30.0CH condensing Max output (kW) 20.0 24.7DHW flow rate l/min. 35°C rise 9.8 12.3DHW response1 5 seconds 5 secondsSEDBUK rating A ASEDBUK % 90.3 90.3NOx class 5 (natural gas) Yes YesAdjustable to LPG Yes Yes

ConstructionMain heat exchanger type Coiled tube Coiled tube

Heat exchanger material Stainless steel Stainless steelBurner type Pre-mixed Pre-mixedFully modulating Yes YesDHW plate heat exchanger Yes YesIntegrated hydrobloc Yes Yes

38

Ultracom cx specifications - Combi (Continued)

Ultracom 24cx 30cx

InstallationSuitable for sealed systems Yes Yes

Suitable for open-vent systems No NoFilling loop Integral IntegralFlow restrictor Yes 8 l/min Yes 12 l/minInbuilt system bypass Yes YesInbuilt condensate trap/siphon Yes YesInbuilt boiler frost protection Two stage Two stageContinua electronics Yes YesZero compartment ventilation Yes Yes

ClearancesTop (mm) (from top of boiler) 150 150

Side (mm) 20 20Bottom (mm) 200 200Front (mm)2 600 600

User InterfaceUser display LCD LCD

Diagnostics Advanced AdvancedUser adjustable CH temp control Yes YesUser adjustable DHW temp control Yes YesEco setting on DHW Yes YesInbuilt Programmer3 No3 No3

PipesPrefixing jig with DIN layout Optional Optional

Optional upward piping kit Yes YesWater connections 2 x 22mm 2 x 15mm 2 x 22mm 2 x 15mm

FluesMax horizontal 10m 10m

Max vertical 10m 10mMax twin flue (total air + flue) 40m 40mOptional Plume Management Kit Yes Yes

Notes:



3 Analogue timer available as an accessory

39

The Ultracom rangeUltracom sxi specifications - Sealed System

Ultracom 18sxi 30sxi


Weight (packed) 42kg 45kg


CH condensing Max output (kW) 20.0 30.6SEDBUK rating A ASEDBUK % 90.4 90.6NOx class 5 (natural gas) Yes YesAdjustable to LPG Yes Yes



steelStainless

steel

Burner type Pre-mixed Pre-mixedFully modulating Yes YesIntegrated hydrobloc Yes Yes


Suitable for open-vent systems No NoInbuilt system bypass Yes YesInbuilt condensate trap/siphon Yes YesInbuilt boiler frost protection Two stage Two stageContinua electronics Yes YesZero compartment ventilation Yes Yes



User InterfaceUser display Digital Digital

Diagnostics Advanced AdvancedUser adjustable CH temp control Yes YesOptional Programmer Yes2 Yes2

Prefixing jig with DIN layout Optional OptionalOptional upward piping Yes Yes

PipesWater connections 2 x 22mm 2 x 22mm



40

Ultracom 12hxi 15hxi 18hxi 24hxi 30hxi 38hxi

SizeCasing dimensions (h w d)(mm) 610 x 375 x 334 610 x 375 x 334 610 x 375 x 334 610 x 375 x 334 610 x 375 x 334 610 x 375 x 334

Weight (packed) 28kg 28kg 28kg 31kg 31kg 31kg

PerformanceCH output (kW) Min/Max 5.0/12.0 5.0/15.0 5.0/18.6 5.3/24.0 5.3/28.2 6.3/38.0

CH condensing Max output (kW) 12.9 16.2 20.0 25.0 30.6 41.0SEDBUK rating A A A A A ASEDBUK % 90.5 90.5 90.4 90.5 90.6 90.8NOx class 5 (natural gas) Yes Yes Yes Yes Yes YesAdjustable to LPG Yes Yes Yes Yes Yes Yes

ConstructionMain heat exchanger type Coiled tube Coiled tube Coiled tube Coiled tube Coiled tube Coiled tube


steelStainless

steelStainless

steelStainless

steelStainless

steelStainless

steel

Burner type Pre-mixed Pre-mixed Pre-mixed Pre-mixed Pre-mixed Pre-mixedFully modulating Yes Yes Yes Yes Yes Yes

InstallationSuitable for sealed systems Yes Yes Yes Yes Yes Yes

Suitable for open vent systems Yes Yes Yes Yes Yes YesInbuilt condensate trap/siphon Yes Yes Yes Yes Yes YesInbuilt boiler frost protection Two stage Two stage Two stage Two stage Two stage Two stageContinua electronics Yes Yes Yes Yes Yes YesZero compartment ventilation Yes Yes Yes Yes Yes Yes

ClearancesTop (mm) (from top of boiler) 150 150 150 150 150 150

Side (mm) 20 20 20 20 20 20Bottom (mm) 200 200 200 200 200 200Front (mm)1 600 600 600 600 600 600

User InterfaceUser display Digital Digital Digital Digital Digital Digital

Diagnostics Advanced Advanced Advanced Advanced Advanced AdvancedUser adjustable CH temp control Yes Yes Yes Yes Yes YesOptional Programmer Yes2 Yes2 Yes2 Yes2 Yes2 Yes2

PipesWater connections 2 x 22mm 2 x 22mm 2 x 22mm 2 x 22mm 2 x 22mm 2 x 22mm

FluesMax horizontal 10m 10m 10m 10m 10m 10m

Max vertical 10m 10m 10m 10m 10m 10mMax twin flue (total air + flue) 40m 40m 40m 40m 40m 40mOptional Plume Management Kit Yes Yes Yes Yes Yes Yes

Ultracom hxi specifications - Open Vent

Notes:


2 Activated with addition of Smart Wiring Centre

41

Flexicom cx specifications - Combi

The Flexicom range

Flexicom 24cx 30cx 35cx

SizeCasing dimensions (h w d)(mm) 700 x 390 x 280 700 x 390 x 280 700 x 390 x 280

Weight (lift) 36kg 36kg 36kg

PerformanceCH output (kW) Min/Max 9.3/18.0 9.3/24.0 9.3/30.0

DHW output (kW) Min/Max 9.3/25.1 9.3/30.0 9.3/35.0CH condensing Max output (kW) 18.8 24.9 31.0DHW flow rate l/min. 35°C rise 9.85 12.3 14.4DHW response1 5 seconds 5 seconds 5 secondsSEDBUK rating A A ASEDBUK % 90.3 90.0 90.2NOx class 5 (natural gas) Yes Yes YesAdjustable to LPG No No No

ConstructionMain heat exchanger type Cast Cast Cast

Heat exchanger material Aluminium Aluminium AluminiumBurner type Pre-mixed Pre-mixed Pre-mixedFully modulating Yes Yes YesDHW plate heat exchanger Yes Yes YesIntegrated hydrobloc Yes Yes Yes

InstallationSuitable for sealed systems Yes Yes Yes

Suitable for open vent systems No No NoFilling loop Integral Integral IntegralFlow restrictor Yes 8.7 l/min Yes 11.7 l/min Yes 14 l/minInbuilt system bypass Yes automatic Yes automatic Yes automaticInbuilt condensate trap/siphon Yes Yes YesInbuilt boiler frost protection Two stage Two stage Two stageContinua electronics Yes Yes YesZero compartment ventilation Yes Yes Yes

Notes:



42

Flexicom cx specifications - Combi (Continued)

Flexicom 24cx 30cx 35cx

ClearancesTop (mm) (from top of boiler) 150 150 150

Side (mm) 5 5 5Bottom (mm) 150 150 150Front (mm)2 600 600 600

User InterfaceUser display 2 Digit LCD 2 Digit LCD 2 Digit LCD

Diagnostics Advanced Advanced AdvancedUser adjustable CH temp control Yes Yes YesUser adjustable DHW temp control Yes Yes YesOptional inbuilt timer Yes Yes YesPrefixing jig with DIN layout Yes Yes YesOptional spacing frame Yes Yes Yes

Pipes

Water connections2 x 22mm 2 x 15mm

2 x 22mm 2 x 15mm

2 x 22mm 2 x 15mm

FluesMax horizontal 8m 8m 8m

Max vertical 8m 8m 8mMax twin flue (total air + flue) 20m 20m 20mMax direct rear flue 0.55m 0.55m 0.55mOptional Plume Management Kit Yes Yes Yes

43

Flexicom sx specifications - Sealed System

The Flexicom range

Flexicom 18sx 30sx


Weight (lift) 36kg 36kg


CH condensing Max output (kW) 18.8 31.0SEDBUK rating A ASEDBUK % 90.3 90.1NOx class 5 (natural gas) Yes YesAdjustable to LPG No No

ConstructionMain heat exchanger type Cast Cast

Heat exchanger material Aluminium AluminiumBurner type Pre-mixed Pre-mixedFully modulating Yes Yes


Suitable for open-vent systems No NoInbuilt system bypass Yes automatic Yes automaticInbuilt condensate trap/siphon Yes YesInbuilt boiler frost protection Two stage Two stageContinua electronics Yes YesZero compartment ventilation Yes Yes



User InterfaceUser display 2 Digit LCD 2 Digit LCD

Diagnostics Advanced AdvancedUser adjustable CH temp control Yes YesOptional inbuilt timer No NoPrefixing jig with DIN layout Yes YesOptional spacing frame Yes Yes



Max vertical 8m 8mMax twin flue (total air + flue) 20m 20mMax direct rear flue 0.55m 0.55mOptional Plume Management Kit Yes Yes

Notes:


44

Flexicom hx specifications - Open Vent

Flexicom 12hx 15hx 18hx 24hx 30hx 35hx

SizeCasing dimensions (h w d)(mm) 600 x 375 x 280 600 x 375 x 280 600 x 375 x 280 600 x 375 x 280 600 x 375 x 280 600 x 375 x 280

Weight (lift) 25kg 25kg 25kg 25kg 25kg 25kg

PerformanceCH output (kW) Min/Max 9.3/12.0 9.3/15.0 9.3/18.0 9.3/24.0 9.3/30.0 9.3/35.0

CH condensing Max output (kW) 12.8 15.8 18.8 24.8 31.0 36.0SEDBUK rating A A A A A ASEDBUK % 90.7 90.5 90.4 90.3 90.0 90.3NOx class 5 (natural gas) Yes Yes Yes Yes Yes YesAdjustable to LPG No No No No No No

ConstructionMain heat exchanger type Cast Cast Cast Cast Cast Cast

Heat exchanger material Aluminium Aluminium Aluminium Aluminium Aluminium AluminiumBurner type Pre-mixed Pre-mixed Pre-mixed Pre-mixed Pre-mixed Pre-mixedFully modulating Yes Yes Yes Yes Yes YesSuitable for sealed systems Yes Yes Yes Yes Yes Yes

InstallationSuitable for open vent systems Yes Yes Yes Yes Yes Yes

Inbuilt condensate trap/siphon Yes Yes Yes Yes Yes YesInbuilt boiler frost protection Two stage Two stage Two stage Two stage Two stage Two stageContinua electronics Yes Yes Yes Yes Yes YesZero compartment ventilation Yes Yes Yes Yes Yes Yes

ClearancesTop (mm) (from top of boiler) 150 150 150 150 150 150

Side (mm) 5 5 5 5 5 5Bottom (mm) 150 150 150 150 150 150Front (mm)1 600 600 600 600 600 600

User InterfaceUser display 2 Digit LCD 2 Digit LCD 2 Digit LCD 2 Digit LCD 2 Digit LCD 2 Digit LCD

Diagnostics Advanced Advanced Advanced Advanced Advanced AdvancedUser adjustable CH temp control Yes Yes Yes Yes Yes YesOptional inbuilt timer No No No No No No

PipesWater connections 2 x 22mm 2 x 22mm 2 x 22mm 2 x 22mm 2 x 22mm 2 x 22mm

FluesMax horizontal 8m 8m 8m 8m 8m 8m

Max vertical 8m 8m 8m 8m 8m 8mMax twin flue (total air + flue) 20m 20m 20m 20m 20m 20mMax direct rear flue 0.55m 0.55m 0.55m 0.55m 0.55m 0.55mOptional Plume Management Kit Yes Yes Yes Yes Yes Yes

45

The Ultrapower rangeUltrapower sxi specifications - System Store

Ultrapower 100sxi 170sxi


Weight (boiler module lift) 50.5kg 50.5kgWeight (tank module lift) 39.0kg 48.0kg


DHW output (kW) Min/Max 8.7/31.0 8.7/31.0Max DHW flow rate (l/min@2bar) 36 36DHW flow rate (l/min. 35°C rise) 12.5 12.5Volume of DHW produced (l) 100 170DHW response1 5 seconds 5 secondsSEDBUK rating A ASEDBUK % 91.1 91.1NOx class 5 (natural gas) Yes YesAdjustable to LPG Yes Yes


Heat exchanger material Stainless steel Stainless steelBurner type Pre-mixed Pre-mixedFully modulating Yes YesDHW plate heat exchanger Yes YesIntegrated hydrobloc Yes Yes


Suitable for open-vent systems No NoFilling loop Yes YesFlow restrictor No NoInbuilt system bypass Yes YesInbuilt condensate trap/siphon Yes YesInbuilt boiler frost protection Yes Yes Continua electronics Yes YesZero compartment ventilation Yes Yes


Side (mm) 5 5Front (mm)2 600 600

User InterfaceUser display Digital Digital

Diagnostics Advanced AdvancedUser adjustable CH temp control Yes YesUser adjustable DHW temp control Yes YesOptional programmer Built-in 7 day two channel Built-in 7 day two channelPre-fixing jig Yes Yes




46

The Betacom cThe Xtramax HEXtramax HE specifications - Storage Combi Betacom c specifications - Combi

Betacom c 24c 30c


Weight (lift) 37kg 38kg


DHW output (kW) Min/Max 10.2/24.7 14.26/27.6CH condensing output (kW) 24.9 28.8DHW flow rate (l/min, 35°C rise) 9.4 10.5SEDBUK rating B BSEDBUK % 86.0 86.4LPG Compatible No No

ConstructionMain heat exchanger type Tube & fin Tube & fin

Heat exchanger material Copper CopperBurner type Multi-bladed Multi-bladedFully modulating Yes YesDHW plate heat exchanger Yes YesIntegrated hydrobloc No NoSealed system Yes Yes

InstallationSuitable for open-vent systems No No

Flow restrictor Yes 8 l/min Yes 10 l/minInbuilt system bypass No NoInbuilt condensate trap/siphon Trap TrapInbuilt boiler frost protection Yes YesZero compartment ventilation No No



User InterfaceUser display LED LED

Diagnostics LED LEDUser adjustable DHW temp control Yes YesOptional timer Inbuilt Inbuilt

Pipes

Water connections2 x 22mm2 x 15mm

2 x 22mm2 x 15mm

FluesMax horizontal 5.6m 4.6m

Max vertical 6.8m 5.8mMax twin flue (total air + flue) 14.3m 11.9mOptional Plume Management Kit 2m 2m

Xtramax HE

SizeCasing dimensions (h w d) (mm) 890 x 700 x 480

Weight (lift) (kg) 75kg

PerformanceCH output (kW) Min/Max 7.6/28.0

DHW output (kW) Min/Max 7.6/33.2CH condensing output (kW) 30.6DHW flow rate (l/min, 35°C rise) 14DHW response 5 secondsSEDBUK rating ASEDBUK % 90.6NOx class 5 (natural gas) YesAdjustable to LPG Yes

ConstructionMain heat exchanger type Coiled tube

Heat exchanger material Stainless steelBurner type Pre-mixedFully modulating YesDHW plate heat exchanger YesIntegrated hydrobloc Yes

InstallationSuitable for sealed systems Yes

Suitable for open vent systems NoFlow loop IntegralFlow restrictor Yes 16 l/minInbuilt system bypass YesInbuilt condensate trap/siphon YesInbuilt boiler frost protection Two stageContinua electronics YesZero compartment ventilation Yes

ClearancesTop (mm) (from top of boiler) 150

Slide (mm) 50Bottom (mm) 200Front (mm)2 600

User InterfaceUser display 2 digital LCD

Diagnostics AdvancedUse adjustable DHW temp control YesEco setting on DHW NoOptional Programmer No

PipesPre-fixing jig with DIN layout No

Optional rear piping kit No

FluesMax horizontal 3m

Max vertical 5.5mMax twin flue (total air + flue) 40mOptional Plume Management Kit Yes

Notes:



47

The Cylinder range

Cylinder size 115 150 175 200 250 300

Dimensions & WeightsStandard capacity litres 115 150 175 200 250 300

Maximum water supply pressure bar 10 10 10 10 10 10Maximum primary circuit pressure bar 2.5 2.5 2.5 2.5 2.5 2.5Pressure reducing valve bar 3.5 3.5 3.5 3.5 3.5 3.5T/P valve °C/bar 95/7.0 95/7.0 95/7.0 95/7.0 95/7.0 95/7.0Net weight (kg) 28 30 33 39 44 49Weight (full) (kg) 145 175 205 245 310 340Height (mm) 969 1179 1399 1499 1789 2109Diameter (mm) 554 554 554 554 554 554

ConnectionsCold mains inlet 22mm compression

DHW outlet 22mm compressionBalanced pressure cold water outlet 22mm compressionPrimary flow 22mm compression (on 2 port value)Primary return 22mm compressionElectrical connections 230/240V (50Hz)

Coil SpecificationsReheat time min 18 20 18.5 24 28 42

Heat up time min 20 21 24 26 30 35kW Coil rating 19.3 19.3 22 22 26 26Heat loss kWh/24hrs 1.7 1.9 2.0 2.1 2.3 2.5

Single coil

48

Cylinder size 200 250 300

Dimensions & WeightsDiameter (mm) 550 550 550

Height1 1499 1789 2109 Length of the immersion heater (mm) 430 430 430Weight empty / full (kg) 39 / 245 44 / 310 49 / 340

PerformanceCapacity (l) 200 250 300

Reheat capacity (boiler) (%) 63 63 60Heat up time (boiler) (mins) 21 26 30Recovery time (boiler) (mins) 13 16 21Heat loss (kWh/24hrs) 1.9 2.1 2.4

SafetyMax mains inlet pressure (bar) 10 10 10

Pressure reducing valve setting (bar) 3.5 3.5 3.5Expansion relief valve setting (bar) 6.0 6.0 6.0T&P relief valve settings (°C / bar) 95 / 7.0 95 / 7.0 95 / 7.0

ConnectionsMains inlet / hot water outlet2 (mm) 22 22 22

Balanced cold water outlet2 (mm) 22 22 22Boiler flow / return2 (mm) 22 22 22Solar flow / return2 (mm) 22 22 22Thermostats & thermal cut outs [V (Hz)] 240V (50Hz) 240V (50Hz) 240V (50Hz)

Immersion heater & motorised valve [V (Hz)]

240V (50Hz) 240V (50Hz) 240V (50Hz)

Twin coil

Notes:

1 Excluding clearances for connecting fittings / pipework

2 Compression fittings supplied

49

Product dimensions

Range A B C D E F

Ultracomcxi (all models) 726 450 334 176 100 n/a

hxi (all models) 610 375 334 176 100 n/asxi (all models) 726 450 334 176 100 n/a

Flexicom cx (all models) 700 390 280 149 100 n/a

hx (all models) 600 375 280 149 100 n/asx (all models) 700 390 280 149 100 n/a

Ultrapowersxi (100) 1260 575 600 145 100 106.5

sxi (170) 1520 575 600 145 100 106.5

Betacomc (24) 720 405 330 170 100 n/a

c (30) 720 430 330 170 100 n/a

XtramaxHE 890 700 480 301 100 n/a

A

D

C

F

E

B

A

C

B

A

D

C

F

E

B

A

D

C

F

E

B

Ultracom, Flexicom & Betacom c

Ultrapower

Flexicom available with direct rear flue

Xtramax HE

50

Product clearances

Range A B C D E F G

Ultracomcxi (all models) 150 5 20 200 5 5 6001

hxi (all models) 150 5 20 200 5 5 6001

sxi (all models) 150 5 20 200 5 5 6001

Flexicom cx (all models) 1502 5 5 150 5 5 6001

hx (all models) 1502 5 5 150 5 5 6001

sx (all models) 1502 5 5 150 5 5 6001

Ultrapowersxi (100) 150 5 5 n/a n/a n/a 6001

sxi (170) 150 5 5 n/a n/a n/a 6001

Betacomc (24) 200 20 50 300 203 203 300

c (30) 200 20 50 300 203 203 300

XtramaxHE 150 54 50 200 5 5 200

Notes:

1 A removable compartment door can be placed at least

5mm in front of the appliance.

2 This can be reduced to 20mm if using a direct rear flue.

3 Including combustible material.

4 Increase to 25mm clearance from combustible material.

D

C C

A B

G

E F

G

FE

C C

A B

D

C C

AB

G

FE

Ultracom, Flexicom & Betacom c

Ultrapower Xtramax HE

51

Horizontal flueing options

A H,I,J

D,E,F

AC

C

D,E,F

D,E,F

H,I,J

CD,E,F

A

H,I,J

D,E,F

A

H,I,J

CD,E,FA

GH,I,J

Horizontal flue accessories

Horizontal flue lengthsThe horizontal flueing information below applies to all Glow-worm high efficiency boilers.

Top rear and top side horizontal flue options

Boiler Max HorizontalCompatible with

Plume Management Kit

Ultracom 10m YES1

Flexicom 8m YES1

Ultrapower 8m YES1

Xtramax 5m YES1

Betacom 24 c 5.6m Max 2m1


Component Description Part Number

A Horizontal Telescopic flue A2043600B 45° Bend (2 off) 2000460485C 90° Bend (1 off) 2000460484D 0.5m Extension (1 off) 2000460481 E 1m Extension (1 off) 2000460482F 2m Extension (1 off) 2000460483G Vertical Flue Adaptor A2024600H Deflector Terminal (Black) 0020060582I Deflector Terminal (White) 0020060583J Black Terminal A2043700

C

G

AD,E,F

H,I,J

A

H

I

B J

D

E

F

G

C

Notes:

1 The overall maximum flue length must not be exceeded

52

Vertical flue options

A H L

I

M

B

J

K

F

G

C,D,E

Vertical flueing options

F

C,D,E

G,M

F

C,D,E

C,D,E

B

B

G,M

F

C,D,E

C,D,E

A

G,M

Boiler Max VerticalCompatible with


Ultracom 10m YES1

Flexicom 8m YES1

Ultrapower 12m YES1

Xtramax 5.5m YES1



Vertical flue lengthsThe vertical flueing information below applies to all Glow-worm high efficiency boilers.

Vertical flue accessories


A 45° Bend (2 off) 2000460485B 90° Bend (1 off) 2000460484C 0.5m Extension (1 off) 2000460481 D 1m Extension (1 off) 2000460482E 2m Extension (1 off) 2000460483F Vertical Flue Adaptor A2024600G Vertical Roof Terminal 2000460480H Pitched Roof Flashing 2000460479I Flat Roof Flashing 2000460478J Sliding Sleeve 2000460487K Fixing Bracket (5 off) 2000460486L Telescopic Extension A2036900M Ridge Tile Terminal A2043800

Notes:


Notes:

i Horizontal sections must have a continuous fall of at least 2.5° (44mm/meter) back to the boiler.

53

Twin flueing options

A

D

C

C

C

C

C

E

A

C

L

E

J

K

D

B

C

C

C

C

C

C

C

C

J

J

C

D

B

B

Twin flue lengthsThe twin flueing information below applies to all Glow-worm high efficiency boilers.

BoilerMax Twin Air +flue combined

Compatible withPlume Management Kit

Ultracom 40m YES1

Flexicom 20m YES1

Ultrapower 40m YES1

Xtramax 40m YES1



Twin flue accessories


A 45° Bend (2 off) A2011300B 90° Bend (1 off) A2011400C 1m Extension (1 off) A2011100D Twin Flue Adaptor A2011000E Vertical Roof Terminal 2000460480F Pitched Roof Flashing 2000460479G Flat Roof Flashing 2000460478H Ø 100mm Fixing Bracket (5 off) 2000460486I Ø 80mm Fixing Bracket (5 off) A2012800J Horizontal Terminal A2011200K Single Pipe Adaptor A2011500

LTwin Pipe to

Concentric AdaptorA2011600

Twin flue options

Notes:


Notes:

i The flue outlet must be above the air inlet if mounted vertically.

ii Horizontal sections must have a continuous fall of at least 2.5°

(44mm/meter) back to the boiler.

iii The minimum distance between flue and air terminals is 300mm

(between terminal centres).

A

D

B

E

C

F G

H

J K L

I

54

Direct rear flueing options

Flueing accessories

Direct rear flue option

Flueing example using Horizontal Telescopic Rear Flue

A2043500

Plume management kit accessoriesCompatible with all Glow-worm high efficiency boilers


A 45° Bend Black (2 off) A2044400B 45° Bend White (2 off) A2044500C 90° Bend Black A2044600D 90° Bend White A2044700E 1m Extension Black A2044200F 1m Extension White A2044300G Plume Management Kit White A2044100H Plume Management Kit Black A2044000

A

C

B

D

E

G

F

H

Notes:


Notes:

i Maximum flue lengths must not exceed 6m and be added to the total flue

length calculation.

ii For each additional 90° or 2 x 45° bends fitted, the maximum lengths must

be reduced by 1m.

Direct rear flue lengthsThe direct rear flueing information below applies to the Glow-worm Flexicom range of high efficiency boilers only.

Boiler Max Direct RearCompatible with


Ultracom n/a n/aFlexicom 0.55m YES1

Ultrapower n/a n/aXtramax n/a n/aBetacom 24 c n/a n/aBetacom 30 c n/a n/a

55

Control options

Note:

Satisfies Part L requirements for time and temperature control when used in the above configurations

Ultracomcxi

ClimastatClimapro /

Climapro RFOutdoorSensor

To achieve room compensation you will need:Using inbuilt programmer P + P O OorUsing Glow-worm external controls P + O P O

To achieve weather compensation you will need:Using inbuilt programmer P + P + O PorUsing Glow-worm external controls P + O P + P

To achieve basic on/off control you will need:Using inbuilt programmer P + P O OorUsing Glow-worm external controls P + O P O

Ultracom cxi control options

Ultracomhxi / sxi Climastat Climapro /

Climapro RFSmart Wiring

CentreOptions

boardOutdoorSensor

To achieve room compensation you will need:Using inbuilt programmer P + P + O P O OorUsing Glow-worm external controls P + O P + P O O

To achieve weather compensation you will need:Using inbuilt programmer P + P + O P + O PorUsing Glow-worm external controls P + O P + P + O P

To achieve basic on/off control you will need:Using inbuilt programmer P + P + O O P OorUsing Glow-worm external controls P + O P + O P O

Ultracom hxi / sxi control options

Ultracom cx control options

Ultracomcx

ClimastatClimapro /

Climapro RFAnalogue

TimerOutdoorSensor

To achieve room compensation you will need:Using Glow-worm external controls P + O P O O

To achieve weather compensation you will need:Using Glow-worm external controls P + O P + O P orUsing analogue timer P + P + O P + P

To achieve basic on/off control you will need:Using Glow-worm external controls P + O P O O orUsing analogue timer P + P + O P O

56

Flexicomcx

ClimastatClimapro /

Climapro RFGlide Down

TimerOutdoorSensor

To achieve room compensation you will need:Using optional timer P + P + O P OorUsing Glow-worm external controls P + O P O O

To achieve weather compensation you will need:Using optional timer P + P + O P + PorUsing Glow-worm external controls P + O P + O P

To achieve basic on/off control you will need:Using optional timer P + P + O P OorUsing Glow-worm external controls P + O P O O

Flexicom cx control options

Flexicomhx / sx

ClimastatClimapro /

Climapro RFSmart Wiring

CentreOutdoorSensor

To achieve room compensation you will need:Using Glow-worm external controls P + O P + P O

To achieve weather compensation you will need:Using Glow-worm external controls P + O P + P + P

To achieve basic on/off control you will need:Using Glow-worm external controls P + O P + P O

Flexicom hx / sx control options

Ultrapowersxi

ClimastatClimapro /

Climapro RFOutdoorSensor

To achieve room compensation you will need:Using inbuilt programmer P + P O OorUsing external controls P + O P O

To achieve weather compensation you will need:Using inbuilt programmer P + P + O PorUsing external controls P + O P + P

To achieve basic on/off control you will need:Using inbuilt programmer P + P O OorUsing external controls P + O P O

Ultrapower sxi control options

57

Documents

High Efficiency Boilers & Accessories · Why choose a Glow-worm? 04 – 05 Ultracom high efficiency condensing boiler 06 – 09 Flexicom high efficiency condensing boiler 10 – 13