Embed Size (px)
Citation preview
ConstrucrilHIDROWATER REPELLENT
Construcril Hydro is a colorless water repellent, silane-siloxane-based, dispersed in water and ready for implementation.
§ Ceramic tiles
§ Asbestos cement shingles
§ Walls
§ Mortar coating
§ Natural stones
§ Bare bricks
AREAS OF APPLICATION
§ Facades
ME
RE
LY I
LLU
ST
RA
TIV
E I
MA
GE
S
6 CUSTOMER SERVICE
www.construcril.com.br
Itapevi SP +55 11 [email protected]
CONSTRUCRIL HIDROWATER REPELLENT
APPLICATION PROCESS§ Process 022.
STORAGEStore the product in a cool, dry, and well-ventilated place, out of reach of children, animals and away from heat sources. Never expose the product to direct sunlight.
NOTEConstrucril ensures the quality of all products; we do not assume responsibility for performance of the work since we do not have direct control over the application. All products should be applied as instructed in our factsheets and processes made available by the company on site and technical department.
THECNICAL [email protected]
VALIDITY9 months.
SITEwww.construcril.com.br
ADVANTAGES § Easy to apply with brush, roller or low pressure spray.§ Fast drying.§ High penetration in the pores of the substrate.§ Resistant to alkalinity of the substrate.§ Keeps the surface pores open, allowing the output of
moisture and water vapor.§ Accepts application on substrate with small residual unit.§ Ready for use.§ Reduces the impregnation of smears on facades.§ Protects the surface against the penetration of water and
other agents.
PREPARING THE SURFACESurfaces should be cleaned of dust, loose particles, cream of cement and other contaminants.
APPLICATION§ Apply one hand to the point of dripping from top to
bottom, using, brush, roller or low-pressure spray.§ After first hand, before it dries, apply he second (wet on
wet).
PACKAGING§ Bucket with 16 kg.§ Bucket with 3,6 kg.
USE§ The consumption is 0.15 to 0.50 l/m ²/per hand. Depending
on the substrate.
RECOMMENDATIONS§ It is essential the use of PPE.§ Regular care in handling chemicals.§ In case of contact with skin, wash with soap and water for
at least 15 minutes.§ In case of contact with eyes, rinse immediately with
running water for 15 minutes.§ If swallowed, do not induce vomit and immediately consult
a doctor.
pH
Basic Composition
Conditions of Application
P.E. (g/cm³)
Interval between Hands
Ambient Temperature Drying
Dilution
7 to 8
Silano / Siloxano
UR ≥ 85% and over 10°C
1,00 +/- 0,10 (g/cm³)
120 minutes
6 hours
Water
W a t e r p r o o f i n g s • M o r t a r A d d i t i v e s • S e a l a n t s • M a s t i c s • G l u e s • D r y w a l l J o i n t C o m p o u n d
THECNICAL DATA
