HIAC 8011+LIQUID PARTICLE COUNTING SYSTEM

HIAC 8011+LIQUID PARTICLE COUNTING SYSTEM

…designed for the real world.

Sample management system ensures consistent, accurate data.

• Pressurized sample delivery reduces the impact of bubbles

• Integrated Vacuum/Degas function streamlines sample handling for increased accuracy.

• Automated sample flow for precision data

Fewer steps…increase throughput.

• One button sampling - results under 60 secs

• Quickly load up to 20 custom test recipes

• Set up your own sampling recipe in less than 5 steps

Intelligent on-screen prompts guide users through common sampling activity.

• Advanced instrument diagnostics with recommended actions for users

• User alerts for particle settling and run-to-run variances

• HRLD Smart Sensor alerts for service and calibration due

Stop wasting time diluting samples and cleaning the instrument.

• No dilution required for high viscosity fluids (<425cSt)

• Automated cleaning and flushing routines.

• Sensor contamination alarm informs you in advance to ensure you clean prior to wasting sample and getting bad data

Aerospace Industry

Marine Industry

Injection Molding Plants

Petrochemical Industry

Advancing Science Through Discovery

Immediate particle concentration data

On-site HIAC expertise. Call us, speak with a HIAC expert.

• On-site service and calibration

• Notification with a phone call when your unit is in need of routine service

• Free technical support for the life of your instrument

• 1-800-866-7889

Eliminate printing and go paperless. Get the data immediately in a PDF or Excel® file.

• Create application specific reports in PDF or Excel® format

• Embedded web browser for online report review and approval

• Export reports via USB memory stick or Ethernet

© 2017 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks used herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries.

For Beckman Coulter’s worldwide office locations and phone numbers, please visit “Contact Us” at beckman.com

PART-2436SB03.17

Specifications

Weight (without sensor) 58.2 lbs, (26.4 kg)

Sample Flow Rate (mL/min) 10 to 100 (sensor dependent)

Sample Volume (ml) 5 to 100

Tare Volume (ml) 0.1 to 100 ml in 0.1 ml steps, not to exceed 1056 ml minus total sample volume

Flow Accuracy +/- 2.5%

Viscosity Range 1-425cSt

Operating Pressure Range maximum = 90psi

Operating Temperature Range 10 to 40˚C

Storage Temperature Range -35 to -65˚C

Relative Humidity 10% to 80%, non-condensing

Max Altitude 6,500 ft.

Communication, Host I/0 Ethernet and 2 USB ports

Safety Feature Waste container full alarm with optional float switch

Instrument Power 100 - 240VAC, 50/60 Hz, 0.5 A

Air Source Shop or pump

Optional Pump Power • 110 to 120 VAC, 60 Hz, 4.5 A • 100 VAC, 50 Hz, 4.5 A • 220 to 240 VAC, 60 Hz, 1.9 A

Liquid Agitation Method Electromagnetic stirrer

Fluid Degas Method Vacuum (requires optional pump)

Fluid Compatibility Fluids compatible with stainless steel, glass and Teflon including: • MIL-H-5606, MIL-H-83282, Shell Tellis™, Monsanto Skydrol™ version • Akso Fyrquel™, Mobile Zerol™ 150, Marston Bentley HW 540 • Monsanto Coolanol™, Stoddard Solvent, Jet Fuel (JP4, JP5) • Kerosene, Diesel Fuel, Mineral Oil, Ethers, Alcohols, Aldehydes • Ketones, Esters, Aromatics, Water

Sensor Cleaning Methods Back flush, clean to count, and clean to volume

Particle Size Range 0.5 μm to 600 μm (sensor dependant)

Number of Size Channels 18

Reporting Standards ISO, NAS, SAE, GOST, DOD and ASTM, User defined, Raw counts

Calibrations • Polystyrene spheres in DI water and glycol • ACFTD in 5606 • ISO-MTD in 5606 (except HRLD-400) • ISO11171 in 5606 (except HRLD-400 & MC-05) • ISO-MTD & ACFTD in 5606 (HRLD-100 & 150 only)

Data Output • pdf, tsv, import and export recipes over USB • Web browser interface over Ethernet

Languages English, French, German, Chinese, Italian, Spanish

IP Rating IP30 per IEC 60529

User Serviceable Items Desiccant, pneumatic and hydraulic filters

Calibration Interval Recommend annual calibration

Display 7” color, non-touch screen

Data Buffer 3,000 records

Printer Optional USB thermal printer

Compliance Declarations CE, cETLus, KCc, C-Tic

Smart Sensor Interface Smart Sensor Ready (allows for reading calibration information from sensors with onboard memory)