SPECIFICATIONS

Composition

Applies on

Blade

45°

Up to 60°C, best inside-out

YESbest inside-out VerticalNO Between 18°C

and 26°C

Away from sunligh t and

dust

Pressure

50 gf

Speed

25 cm/sec

Time

5 seconds

Temperature

120°/150°C(248°/302°F)

Pressure

High (>3,5 bar)

Peel

hot

SUGGESTED CUTTING SETTINGS TRANSFER SETTINGS

PU 85 microns Non adhesive polyester

Average Thickness Carrier Certifications

APPLICATION INSTRUCTIONS

Print, Cut and peel off excess materialRemove the print from the carrier with the help of TTD EasyPlace the decoration on the fabricApply following the recommended parametersRemove the TTD while hot

PRODUCT HIGHLIGHTSVery ThinSuitable for technical fabrics (Polyester)Low Application Temperature & Time

NOTE: Given the large number of inks and printers, we highly recommend to perform a test before launching a production

HI-5 PRINT MATT/VIVID

Product Information Mod.R&S 06 | Rev.5 | Update 02/2021 | Page 1

CARE AND WASHING RECOMMENDATIONS

Washing Ironing Tumble dry Dry cleaning Position Storage Shelf Life

Storage Temperature

Storage Conditions

Wait 24 hours after the application before the first washRespect the textile recommendationsDo not bleach or use aggressive chemical agents

cotton, polyester, poly/cotton blends, elastan (not suited for treated

and dye sublimated textiles)

YES (synthetic

cycle)Up to 2 years

REACH n° 1907/2006/EU

Tel: 01827 300500Web: www.grafityp.co.uk

E-mail: sales@grafityp.co.uk