HETEROPHASIC COPOLYMER Extrusion, Injection Thermoforming ... · Molding Extrusion, Thermoforming & Blow molding. PPCO-DS-60/03 Jun 13 Jampilen EP302K TYPICAL PROPERTIES VALUE UNIT

New MFR New MFRSP151 3.5 H1022 0.3

EP302K 3.5 H2464 0.3EP200K 3.5 EPD60R 0.35EP300K 4 EP300D 0.8EP340K 4 EP310D 0.8EP540L 6 EP400G 1.3EP300L 6 EP440G 1.3EP432L 6 EP302K 3.5EP440L 6EP332L 7EP300M 7EP340M 7.5EP200M 8SP179 8

EPX-3130UV 10EP540N 12EP440N 12EP548N 12

BA238G3 12EP300N 15EP540P 15EP548P 16EP440R 20EP548R 21EP448S 40EP340S 42EP548S 44EP448T 48

EPX-548T 50EP348U 70EP548U 70EP648V 100

HETEROPHASIC COPOLYMER

InjectionMolding

Extrusion,Thermoforming &

Blow molding

PPCO-DS-60/03 Jun 13

JJaammppiilleenn EEPP330022KK

TYPICAL PROPERTIES VALUE UNIT METHOD

PhysicalMelt Flow Rate (230 oC, 2.16kg) 3.5 g/10min ASTM D1238Density 0.9 g/cm3 ASTM D1505

MechanicalFlexural Modulus 1250 MPa ASTM D790Tensile Strength at Yield 29 MPa ASTM D638Tensile Elongation at Yield 9 % ASTM D638Izod Impact Strength (notched) at 23 oC 120 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 25 J/m ASTM D256Rockwell Hardness 94 R-Scale ASTM D785ThermalVicat softening point (10 N) 152 oC ASTM D1525H.D.T. (0.46 Mpa) 90 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012

No. 5, North-Falamak St., Eyvanak Blvd., Farahzadi Blvd., Shahrak-e-Qods., Tehran, 1467715171, Iran.Tel: +9821-84286, Fax: +9821-88563100Email: [email protected]

This data and information is considered to be correct and offered in good faith as a guide. But we do not warrant or otherwise guarantee themerchantability, fitness for a particular purpose or suitability of this information, products or processes described.

Description:″Jampilen EP302K″ is a medium flow, heterophasicpolypropylene copolymer. This grade combines excellentstiffness with high impact and is suitable for injection moldingand thermoforming. Due to its particular balance of mechanicalproperties, ″Jampilen EP302K″ is widely used for injectionmolding toys, sports articles, small containers, housewares,closures and caps. Technical applications are components forappliances and parts for the automotive industry.Thermoformed containers are another important application of″Jampilen EP302K″. This grade is suitable for food contact.

Processing Method: Injection moldingThermoforming

Features: Excellent stiffnessHigh impact strengthHeterophasic copolymer

Typical Applications:ToysSports articlesSmall containersHousewaresClosures and capsComponents for appliances and parts for the automotive industry

Approval:Food





MechanicalFlexural Modulus 1000 MPa ASTM D790Tensile Strength at Yield 23 MPa ASTM D638Tensile Elongation at Yield 10 % ASTM D638Izod Impact Strength (notched) at 23 oC 750 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 100 J/m ASTM D256Izod Impact Strength (notched) at -40 oC 75 J/m ASTM D256Hardness (Rockwell) 80 R-Scale ASTM D785ThermalVicat softening point (10N) 145 oC ASTM D1525H.D.T. (0.46 Mpa) 85 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description: ″Jampilen EP200K″ is a heterophasic copolymer for injectionmolding applications that combines outstanding processabilitywith extremely high impact resistance.″Jampilen EP200K″ is designed for applications where veryhigh toughness is a primary requirement. For theseapplications, very high impact polypropylene offer definiteadvantages over HDPE due to the better stackability and stresscracking resistance.″Jampilen EP200K″ is suitable for food contact.

Processing Method: Injection moldingCompounding

Features: Good processabilityHigh impact resistanceHeterophasic copolymer

Typical Applications: Housewares, toys, indoor and outdoor furniture and suitcasesParts for sports equipment and bicycles and technicalcomponentsBoxes, containers, pallets, crates, pails and lidsBlow molded bottles and containersBitumen modification and various compounding applications

Approval:Food

PPCO-DS-108/02 Oct 13


TYPICAL PROPERTIES VALUE UNIT METHODPhysicalMelt Flow Rate (230 oC, 2.16kg) 4.0 g/10min ISO 1133Density 0.9 g/cm3 ISO 1183

MechanicalTensile Modulus 1200 MPa ISO 527-1, -2Tensile Strength at Yield 27 MPa ISO 527-1, -2Tensile Elongation at Yield 7 % ISO 527-1, -2Tensile Elongation at Break >50 % ISO 527-1, -2Charpy impact strength (Notch A) kJ/m2 ISO 179

23°C 10.50°C 5.5

-20°C 4Ball indentation hardness (H 358/30) 53 MPa ISO 2039-1ThermalVicat softening point A50 150 oC ISO 306H.D.T. B (0.45 MPa) 75 oC ISO 75B-1, -2Accelerated oven ageing in air at 150 °C 360 hour ISO 4577



Description: ″Jampilen EP300K″ is a low fluidity heterophasic copolymer,suitable for injection molding applications. The product exhibitsvery high impact even at low temperatures combined with goodstiffness.″Jampilen EP300K″ is typically used in houseware items and incrates.This grade is suitable for food contact.


Features:High impact resistanceGood stiffnessHeterophasic copolymer

Typical Applications:

Approval:

Housewares, seats, chair shells, toys, suitcases and smallpackaging itemsInjection molded caps and closuresMedium sized containers, buckets, pails, transport crates andcrates for cold storageComponents for industrial applicationsParts for the automotive industry (e.g. wheel arch liners,steering wheels and interior parts)Blow molded bottles and containersThermoformed multilayer containers for dairy products

Food




MechanicalTensile Modulus 1100 MPa ISO 527-1, -2Tensile Strength at Yield 20 MPa ISO 527-1, -2Tensile Elongation at Break >50 % ISO 527-1, -2Tensile Elongation at Yield 5 % ISO 527-1, -2Charpy impact strength (Notch A) ISO 179

23°C 66 kJ/m2

0°C 33 kJ/m2

-20°C 7 kJ/m2

Ball indentation hardness (H 358/30) 46 MPa ISO 2039-1ThermalVicat softening point /A50 140 oC ISO 306H.D.T. B (0.45 MPa) 85 oC ISO 75B-1, -2



Description: ″Jampilen EP340K″ is a nucleated heterophasic copolymersuitable for injection molding and thermoforming applications.″Jampilen EP340K″ exhibits outstanding low temperatureimpact performance and good stiffness combined with goodprocessability. ″Jampilen EP340K″ is designed for use inluggage, transport and cold storage crates, sports and leisureequipment, toys and typical consumer components which aresubjected to impact and/or low temperature.


Features: High impact resistanceGood stiffnessNucleatedHeterophasic copolymer

Typical Applications:Sports, Leisure and ToysTransport and cold storage cratesLuggage

PPCO-DS-63/03 Feb 10

JJaammppiilleenn EEPP554400LL



MechanicalFlexural Modulus 1450 MPa ASTM D790Tensile Strength at Yield 32 MPa ASTM D638Tensile Elongation at Yield 8 % ASTM D638Izod Impact Strength (notched) at 23 oC 90 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 60 J/m ASTM D256Rockwell Hardness 100 R Scale ASTM D785ThermalVicat softening point (10N) 152 oC ASTM D1525H.D.T. (0.46 Mpa) 115 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hours ASTM D3012



Description: ″Jampilen EP540L″ is a medium flow heterophasicpolypropylene copolymer with high stiffness and good impactstrength. Items produced with ″Jampilen EP540L″ also featureexcellent aesthetic properties, with high gloss and good stresswhitening resistance. The grade is designed for molding smalland medium sized rigid containers, packaging items andhousewares. It is also recommended for toys, tools, caps andclosures.″Jampilen EP540L″ is suitable for food contact.

Processing Method:Injection molding

Features: Excellent aesthetic propertiesGood impact strengthHigh stiffnessGood stress whitening resistanceHeterophasic copolymer

Typical Applications: Small and medium sized rigid containersPackaging items and housewaresToysCaps and closures

Approval:Food



TYPICAL PROPERTIES VALUE UNIT METHODPhysicalMelt Flow Rate (230 oC, 2.16kg) 6 g/10min ISO 1133Density 0.9 g/cm3 ISO 1183


23°C 7.50°C 4

-20°C 3Ball indentation hardness (H 358/30) 53 MPa ISO 2039-1ThermalVicat softening point A50 151 oC ISO 306H.D.T. B (0.45 MPa) 77 oC ISO 75B-1, -2



Description: ″Jampilen EP300L″ is a heterophasic copolymer, suitable forinjection molding applications which features good impactproperties. ″Jampilen EP300L″ is used in a large variety ofapplications, such as housewares, crates, stackable boxes andtoy articles.


Features:Good impact resistanceHeterophasic copolymer

Typical Applications:HouasewaresCratesCaps and closuresSports, leisure and toys

PPCO-DS-132/00 Sep 15

Jampilen EP432L

TYPICAL PROPERTIES VALUE UNIT METHODPhysicalMelt Flow Rate (230 oC, 2.16kg) 6.0 g/10min ASTM D1238Density 0.9 g/cm3 ASTM D1505

MechanicalFlexural Modulus 1200 MPa ASTM D790Tensile Strength at Yield 26 MPa ASTM D638Tensile Elongation at Yield 9 % ASTM D638Izod Impact Strength (notched) at 23 oC 170 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 70 J/m ASTM D256Shore hardness (Shore D) 68 ---- ISO 868ThermalVicat softening point (10N) 152 oC ASTM D1525H.D.T. (0.46 Mpa) 95 oC ASTM D648Accelerated oven ageing in air at 150 oC 1800 hours ASTM D3012



Description:

″Jampilen EP432L″ is a heterophasic polypropylenecopolymer with a highly effective heat stabilization packagedesigned for injection molded battery cases and technicalitems. The product offers an excellent balance of mechanicalproperties and processability and features an excellent long-term heat stability. Articles molded with ″Jampilen EP432L″offer a good balance of stiffness and toughness, good surfaceproperties and a very high resistance to chemicals and crazing.″Jampilen EP432L″ is largely used for automotive components.Battery cases, cooling water compensation reservoirs, brakefluid reservoirs, wash water reservoirs, dashboard supports,luggage compartment trims and door trim panels are typicalapplications.

Processing Method: Injection molding

Features:Medium flowHigh impact strengthExcellent long-term heat stabilityGood heat agingHeterophasic copolymer

Typical Applications: Battery cases, cooling water compensation reservoirsBrake fluid reservoirs, wash water reservoirs, dashboardSupports, luggage compartment trims and door trim panelsAppliances, cables and wires

PPCO-DS-64/06 Apr 17

Jampilen EP440L


MechanicalFlexural Modulus 1300 MPa ASTM D790Tensile Strength at Yield 25 MPa ASTM D638Tensile Elongation at Yield 6 % ASTM D638Izod Impact Strength (notched) at 23 oC 200 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 60 J/m ASTM D256ThermalVicat softening point (10N) 150 oC ASTM D1525H.D.T. (0.46 MPa) 90 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hours ASTM D3012


This data and information is considered to be correct and offered in good faith as a guide. But we do not warrant or otherwise guarantee themerchantability, fitness for a particular purpose or suitability of this information, products or processes described

Description: ″Jampilen EP440L″ is a medium flow heterophasicpolypropylene copolymer with improved balance ofmechanical properties. The product features high stiffness andoutstanding impact strength at low temperatures and isspecifically designed for injection molding applications. Incomparison with conventional copolymers with the same MFRand same rigidity, ″Jampilen EP440L″, exhibits 35 % highertoughness.″Jampilen EP440L″ is suitable for a wide range of applicationsin the packaging, automotive and consumer goods industries.Typical applications include luggage, paint pails, buckets,containers, crates, batteries and large toys.


Features:High impact strengthHigh stiffnessHeterophasic copolymer

Typical Applications:Packaging, automotive and consumer goods industriesLuggage, paint pails, bucketsContainers, crates, batteries and large toys

PPCO-DS-66/05 Nov 13




MechanicalFlexural Modulus 1200 MPa ASTM D790Tensile Strength at Yield 27 MPa ASTM D638Tensile Elongation at Yield 9 % ASTM D638Izod Impact Strength (notched) at 23 oC 100 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 40 J/m ASTM D256Rockwell Hardness 93 R-Scale ASTM D785ThermalVicat softening point (10N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 88 oC ASTM D648Accelerated oven ageing in air at 150 oC 1800 hours ASTM D3012



Description: ″Jampilen EP332L″ is a heterophasic polypropylenecopolymer with a highly effective heat stabilization packagedesigned for injection molded battery cases and technicalitems. The product offers an excellent balance of mechanicalproperties and processability and features an excellent long-term heat stability. Articles molded with ″Jampilen EP332L″offer a good balance of stiffness and toughness, good surfaceproperties and a very high resistance to chemicals and crazing.″Jampilen EP332L″ is largely used for automotive components.Battery cases, cooling water compensation reservoirs, brakefluid reservoirs, wash water reservoirs, dashboard supports,luggage compartment trims and door trim panels are typicalapplications.In the electro-technical industries, ″Jampilen EP332L″ is usedfor appliances, cables and wires (e.g. as slotted core element infibre optic cables).″Jampilen EP332L″ is suitable for food contact.


Features: Medium flowExcellent balance of stiffness/impact strengthExcellent long-term heat stabilityGood heat agingLow warpageHeterophasic copolymer

Typical Applications: Battery cases, cooling water compensation reservoirsBrake fluid reservoirs, wash water reservoirs, dashboardSupports, luggage compartment trims and door trim panelsAppliances, cables and wires

Approval:Food


JJaammppiilleenn EEPP330000MM


MechanicalFlexural Modulus 1150 MPa ISO 178Tensile Strength at Yield 26 MPa ISO 527-1, -2Izod impact strength (Notched) ISO 180

23°C 8 kJ/m2

-20°C 6 kJ/m2

Rockwell Hardness 93 R-scale ASTM D785Hardness (Shore D) 68 ---- ISO 868ThermalVicat softening point /A50 151 oC ISO 306Accelerated oven ageing in air at 150 °C 360 hour ISO 4577



Description: ″Jampilen EP300M″ is a heterophasic copolymer for injectionmolding applications that offers excellent balance of stiffness,impact strength and processability. Typical applications for″Jampilen EP300M″ are thin walled packaging, housewares andautomotive parts.″Jampilen EP300M″ is suitable for food contact.

Processing Method:Injection moldingFilm Extrusion

Features:High impact resistanceGood stiffnessGood processabilityHeterophasic copolymer

Typical Applications:Houasewares, toys, small containersAutomotive partsThin walled packagingPails, crates, caps, closures, lidsWheels, garden furniture, chair shells and stadium seatsCast film for staionery

Approval:Food




MechanicalTensile Modulus 1150 MPa ISO 527-1, -2Tensile Strength at Yield 21 MPa ISO 527-1, -2Tensile Elongation at Yield 6 % ISO 527-1, -2Tensile Elongation at Break 50 % ISO 527-1, -2Charpy impact strength (Notch A) ISO 179

23°C 45 kJ/m2

0°C 9 kJ/m2

-20°C 7 kJ/m2

Ball indentation hardness (H 358/30) 46 MPa ISO 2039-1ThermalVicat softening point A50 144 oC ISO 306H.D.T. B (0.45 MPa) 80 oC ISO 75B-1, -2



Description: ″Jampilen EP340M″ is a nucleated heterophasic copolymer,suitable for injection molding applications. It exhibits excellentimpact performance with good stiffness and processability.″Jampilen EP340M″ is designed for applications where veryhigh impact resistance is a critical requirement. Typicalapplications are housewares, luggage, transport and coldstorage crates and consumer components subjected to lowtemperatures and impact. The resin is also ideal as a basematerial in technical compounding.


Features:High impact resistanceGood stiffnessNucleatedGood processabilityHeterophasic copolymer

Typical Applications:HousewaresCratesLuggageSports, leisure and toysCompounding




MechanicalTensile Modulus 900 MPa ISO 527-1, -2Tensile Strength at Yield 19 MPa ISO 527-1, -2Tensile Elongation at Yield 6 % ISO 527-1, -2Tensile Elongation at Break 50 % ISO 527-1, -2Charpy impact strength (Notch A) kJ/m2 ISO 179

23°C 580°C 12

-20°C 9Ball indentation hardness (H 358/30) 40 MPa ISO 2039-1ThermalVicat softening point A50 138 oC ISO 306H.D.T. B (0.45 MPa) 72 oC ISO 75B-1, -2OpticalGloss (60o) 65 ---- DIN 67530



Description: ″Jampilen EP200M″ is a heterophasic copolymer, suitable forinjection molding applications. The product exhibits very highimpact even at low temperatures combined with mediumrigidity.″Jampilen EP200M″ is typically used in toys, householdappliances and technical articles.


Features:Very high impact resistanceMedium rigidityHeterophasic copolymer

Typical Applications:ToysHousehold appliancesTechnical articles


JJaammppiilleenn SSPP117799


PhysicalMelt Flow Rate (230 oC, 2.16kg) 8 g/10min ASTM D1238Density 0.9 g/cm3 ASTM D1505

MechanicalFlexural Modulus 950 MPa ASTM D790Tensile Strength at Yield 19 MPa ASTM D638Tensile Elongation, ultimate 6 % ASTM D638Izod Impact Strength (notched) at 23 oC N.B J/m ASTM D256Izod Impact Strength (notched) at -20 oC 110 J/m ASTM D256Shore hardness (Shore D) 60 ---- ISO 868ThermalVicat softening point (10N) 135 oC ASTM D1525H.D.T. (0.46 Mpa) 75 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description: ″Jampilen SP179″, an injection molding heterophasiccopolymer polypropylene grade, features high impact strengtheven at low temperatures, high melt flow rate and mediumrigidity.This grade is suitable for use with masterbatches.


Features: High impact strengthHigh melt flow rateMedium rigidityHeterophasic copolymer


Battery cases


JJaammppiilleenn EEPPXX--33113300UUVV






Description: ″Jampilen EPX-3130UV″ is a non-filled polypropylenecopolymer for injection molding with very high impactstrength. The product has good U.V. resistance designed foroutdoor applications. This grade is used for production ofautomotive parts, such as bumpers, and compounding.

Processing Method:Injection moldingCompounding

Features:Very high impact strength especially at low temperaturesGood U.V. resistanceGood processabilityHeterophasic copolymer

Typical Applications:Automotive partsOutdoor applicationsTechnical articles


JJaammppiilleenn EEPP554400NN



MechanicalFlexural Modulus 1500 MPa ASTM D790Tensile Strength at Yield 27 MPa ASTM D638Tensile Elongation at Yield 8 % ASTM D638Izod Impact Strength (notched) at 23 oC 100 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 55 J/m ASTM D256Hardness (Rockwll) 98 R-Scale ASTM D785ThermalVicat softening point (10N) 149 oC ASTM D1525H.D.T. (0.46 Mpa) 110 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description: ″Jampilen EP540N″ is a nucleated heterophasic polypropylenecopolymer with an improved mechanical properties balance.The product features outstanding stiffness and high impactstrength at low temperatures and is designed for injectionmolding applications.In comparison with conventional copolymers with the sameMFR and the same toughness, ″Jampilen EP540N″ exhibits20% higher rigidity. ″Jampilen EP540N″ is suitable for a widerange of applications in the packaging, automotive andconsumer goods industries. Typical applications includehousewares, containers, bins, baskets, flowerpots, toys, lids,caps and closures. The grade is also well suited for moldedgarden furniture, chair shells, crates, trays and automotiveparts.″Jampilen EP540N″ is suitable for food contact.


Features: High impact strengthHigh stiffnessHeterophasic copolymer

Typical Applications: Packaging and consumer goodsHousewares, containers, bins, baskets, flowerpotsToys, lids, caps and closuresGarden furniture, chair shells, crates, traysAutomotive parts

Approval:Food





MechanicalFlexural Modulus 1350 MPa ASTM D790Tensile Strength at Yield 25 MPa ASTM D638Tensile Elongation at Yield 10 % ASTM D638Izod Impact Strength (notched) at 23 oC 120 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 55 J/m ASTM D256

Hardness (Shore D) 66 ---- ISO 868ThermalVicat softening point (10N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 95 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description: ″Jampilen EP440N″ is an easy flow heterophasicpolypropylene copolymer with improved mechanical propertiesbalance. The product features high stiffness and outstandingimpact strength even at low temperatures. ″Jampilen EP440N″is specifically designed for injection molding applications. Incomparison with conventional copolymers with the same MFRand the same rigidity, ″Jampilen EP440N″, exhibits 20 %higher toughness.″Jampilen EP440N″ is suitable for a wide range of applicationsin the packaging, automotive and consumer goods industries.Typical applications include luggage, paint pails, buckets,containers, crates, batteries and large toys.


Features:High impact strength and stiffnessExcellent processabilityHeterophasic copolymer

Typical Applications:Packaging, automotive and consumer goods industriesLuggage, paint pails, buckets, containersCrates, batteries and large toys








Description:″Jampilen EP548N″ is a heterophasic polypropylenecopolymer with improved mechanical properties balance. Theproduct features an outstanding stiffness, high impact strength,excellent antistatic properties and is designed for injectionmolding applications. In comparison with conventionalcopolymers with the same MFR and the same toughness,″Jampilen EP548N″ exhibits 20 % higher rigidity.″Jampilen EP548N″ is suitable for a wide range of applicationsin the packaging, automotive and consumer goods industries.Typical applications include housewares, containers, bins,baskets, flowerpots, toys, lids, caps and closures. This grade isalso well suited for molded garden furniture, chair shells,crates, trays and automotive parts.″Jampilen EP548N″ is suitable for food contact.


Features: High impact strength and stiffnessExcellent antistatic propertiesHeterophasic copolymer

Typical Applications: Packaging and consumer goodsHousewares, containers, bins, baskets, flowerpotsToys, lids, caps and closuresGarden furniture, chair shells, crates, traysAutomotive parts

Approval:Food


JJaammppiilleenn BBAA223388GG33



MechanicalFlexural Modulus 1000 MPa ASTM D790Tensile Strength at Yield 20 MPa ASTM D638Tensile Elongation at Yield 6 % ASTM D638Izod Impact Strength (notched) at 23 oC 500 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 100 J/m ASTM D256ThermalAccelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description: ″Jampilen BA238G3″ is a non-filled polypropylene copolymerfor injection molding with very high impact strength. Theproduct has good U.V. resistance designed for outdoorapplications. This grade is specially used for bumpers.


Features:Very high impact strengthGood U.V. resistanceHeterophasic copolymer


Automotive bumpersOutdoor applications




MechanicalFlexural Modulus 1100 MPa ISO 178Tensile Strength at Yield 24 MPa ISO 527-1, -2Tensile Elongation at Yield 6.5 % ISO 527-1, -2ThermalVicat softening point A50 146 oC ISO 306H.D.T. B (0.45 MPa) 75 oC ISO 75B-1, -2Accelerated oven ageing in air at 150 °C 360 hour ISO 4577



Description: ″Jampilen EP300N″ is a heterophasic copolymer for injectionmolding applications. The product offers excellent balance ofstiffness, impact strength and processability. Typicalapplications of ″Jampilen EP300N″ are packaging, housewaresand automotive parts.″Jampilen EP300N″ is suitable for food contact.


Features:Good impact resistanceGood stiffnessGood processabilityHeterophasic copolymer

Typical Applications:CratesHousewaresIndustrial componentsAutomotive parts

Approval:Food


JJaammppiilleenn EEPP554400PP



23°C 7.00°C 3.5

-20°C 3.0Ball indentation hardness (H 358/30) 63 MPa ISO 2039-1ThermalVicat softening point A50 151 oC ISO 306H.D.T. B (0.45 MPa) 90 oC ISO 75B-1, -2



Description: ″Jampilen EP540P″ is a nucleated heterophasic copolymer,suitable for injection molding applications. It exhibits highstiffness combined with good impact balance.″Jampilen EP540P″ is typically used in luggage, housewareitems, containers, caps and closures.″Jampilen EP540P″ is suitable for food contact.


Features:Good impact resistanceGood stiffnessNucleatedHeterophasic copolymer

Typical Applications:Caps and closuresHousewaresLuggageOpaque containers

Approval:Food


JJaammppiilleenn EEPP554488PP


MechanicalTensile Modulus 1550 MPa ISO 527-1, -2Tensile Strength at Yield 28 MPa ISO 527-1, -2Tensile Elongation at Break >50 % ISO 527-1, -2Tensile Elongation at Yield 5 % ISO 527-1, -2Charpy impact strength (Notch A) ISO 179

23°C 8.0 kJ/m2

0°C 4.0 kJ/m2

-20°C 3.0 kJ/m2

Ball indentation hardness (H 358/30) 69 MPa ISO 2039-1ThermalVicat softening point /A50 147 oC ISO 306H.D.T. B (0.45 MPa) 100 oC ISO 75B-1, -2



Description:″Jampilen EP548P″ is a nucleated, antistatic formulated,heterophasic copolymer, suitable for injection moldingapplications. It exhibits high stiffness combined with mediumfluidity. ″Jampilen EP548P″ is extensively used in housewares,furnitures, cylindrical containers and crates.


Features:Medium flowGood stiffnessNucleatedAntistatic propertiesHeterophasic copolymer

Typical Applications:CratesFurnituresHousewaresOpaque containers


JJaammppiilleenn EEPP444400RR


MechanicalTensile Modulus 1150 MPa ISO 527-1, -2Tensile Strength at Yield 27 MPa ISO 527-1, -2Tensile Elongation at Yield 5 % ISO 527-1, -2Tensile Elongation at Break >50 % ISO 527-1, -2Charpy impact strength (Notch A) ISO 179

23°C 8 kJ/m2

0°C 5 kJ/m2

-20°C 4 kJ/m2



Description: ″Jampilen EP440R″ is a nucleated heterophasic copolymer,suitable for injection molding applications. It exhibits excellentstiffness/impact balance combined with a medium high fluidity.″Jampilen EP440R″ is applied in toys, furniture and thin-walledinjection molded items.″Jampilen EP440R″ is suitable for food contact.


Features:Good flowControlled rheologyGood impact resistanceGood stiffnessNucleatedHeterophasic copolymer

Typical Applications:CratesHousewares and furnituresSports, leisure and toysTWIM food containers

Approval:Food


Jampilen EP548R

TYPICAL PROPERTIES VALUE UNIT METHODPhysicalMelt Flow Rate (230 oC, 2.16kg) 21 g/10min ASTM D1238Density 0.9 g/cm3 ASTM D1505




Description: ″Jampilen EP548R″ is a nucleated, antistatic formulated, highfluidity heterophasic copolymer used for thin-walled injectionmolding. Items made with ″Jampilen EP548R″ exhibit highstiffness, relatively good impact resistance and excellentantistatic properties. Due to its excellent moldability and shortcycle times, ″Jampilen EP548R″ allows high productivity rates.The finished items show good mechanical properties, and highdimensional stability.″Jampilen EP548R″ is very well suited for the production ofthin-wall articles or articles with long flow paths such as flowerpots, containers, housewares, filters, filter housings andappliance components.″Jampilen EP548R″ is suitable for food contact.


Features: Good impact strengthHigh stiffnessExcellent antistatic propertiesExcellent moldability and short cycle timesHeterophasic copolymer

Typical Applications: Thin-wall articlesArticles with long flow paths such as flower pots, containers,housewares, filters, filter housings and appliance componentsSports, Leisure and toys

Approval:Food


JJaammppiilleenn EEPP444488SS



MechanicalFlexural Modulus 1300 MPa ASTM D790Tensile Strength at Yield 27 MPa ASTM D638Tensile Elongation at Yield 6 % ASTM D638Izod Impact Strength (notched) at 23 oC 65 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 30 J/m ASTM D256Rockwell Hardness 95 R-Scale ASTM D785ThermalVicat softening point (10 N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 108 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description:″Jampilen EP448S″ is a high melt flow rate, heterophasiccopolymer for thin walled injection molding. Items made withthis grade exhibit high stiffness, good impact resistance andexcellent antistatic properties. The use of ″Jampilen EP448S″allows high productivity because of the easy muld filling andshort cycle times. The excellent balance of mechanicalproperties combined with the outstanding organolepticproperties and antistatic characteristics make this gradeparticularly suitable for thin-walled packaging.″Jampilen EP448S″ is suitable for food contact.


Features: High melt flow rateGood impact strengthHigh stiffnessExcellent antistatic propertiesExcellent organoleptic propertiesHeterophasic copolymer

Typical Applications:Thin-walled packagingMargarine tubs and pots for soft cheeses, pudding, mayonnaiseand other dairy or fatty productsCaps, closures and flower potsCD and DVD boxes, appliance components, small pails, coolboxes and food containers

Approval:Food





MechanicalFlexural Modulus 1250 MPa ASTM D790Tensile Strength at Yield 25 MPa ASTM D638Tensile Elongation at Yield 6 % ASTM D638Izod Impact Strength (notched) at 23 oC 75 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 45 J/m ASTM D256Hardness (Rockwell) 86 R-Scale ASTM D785ThermalVicat softening point (10N) 148 oC ASTM D1525H.D.T. (0.46 Mpa) 100 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012OpticalGloss (60o) 70 ---- ASTM D2457



Description: ″Jampilen EP340S″ is a high fluidity, nucleated heterophasiccopolymer, particularly suitable for injection molding itemsthat require superior mechanical properties balance over a widetemperature range. The easy flow of ″Jampilen EP340S″provides outstanding processability and reduced cycle times.Items molded with ″Jampilen EP340S″ feature excellent impactstrength and good stiffness. The mechanical properties at lowtemperature and dimensional stability are excellent.″Jampilen EP340S″ has been designed for large items withsignificant impact requirements such as boxes, crates, pails andlarge household articles. Other applications include thin-walledcontainers, toys, appliance components, battery cases and somesmaller items such as caps, closures and flower pots.″Jampilen EP340S″ is suitable for food contact.


Features: Excellent impact strengthGood stiffnessGood processability and reduced cycle timesExcellent dimensional stabilityHeterophasic copolymer

Typical Applications: Boxes, crates, pails and large household articlesToys, appliance components, battery casesCaps, closures and flower potsThin-walled containers

Approval:Food








Description:″Jampilen EP548S″ is a high melt flow rate, nucleatedheterophasic copolymer with antistatic agent used forthin-walled injection molding applications. The productfeatures improved balance of mechanical properties. The use of″Jampilen EP548S″ allows high productivity due to the easymold filling and short cycle times.In comparison with conventional copolymers with the sameMFR and the same toughness, ″Jampilen EP548S″ exhibits15% higer rigidity.″Jampilen EP548S″ is suitable for food contact.


Features:Good impact strengthHigh stiffnessEasy mold filling and short cycle timesExcellent dimensional stabilityExcellent organoleptic propertiesHeterophasic copolymer

Typical Applications: Thin-walled packagingMargarine tubs, yoghurt pots, pots for soft cheese, pudding andmayonnaiseCaps and closuresFlower pots and cool boxesOpaque food containersHousewaresSports, leisure and toys

Approval:Food


JJaammppiilleenn EEPP444488TT


MechanicalTensile Modulus 1350 MPa ISO 527-1, -2Tensile Strength at Yield 27 MPa ISO 527-1, -2Tensile Elongation at Yield 5 % ISO 527-1, -2Tensile Elongation at Break 40 % ISO 527-1, -2Charpy impact strength (Notch A) ISO 179

23°C 5.0 kJ/m2

0°C 3.5 kJ/m2

-20°C 2.5 kJ/m2

Ball indentation hardness (H 358/30) 62 MPa ISO 2039-1ThermalVicat softening point A50 151 oC ISO 306H.D.T. B (0.45 MPa) 90 oC ISO 75B-1, -2



Description: ″Jampilen EP448T″ is a heterophasic copolymer for injectionmolding applications containing nucleation and antistaticadditivation. ″Jampilen EP448T″ has very good flowabilityand impact/stiffness balance.The main applications of ″Jampilen EP448T″ are thin walledpackaging, housewares and closures.


Features:Good flowGood impact resistanceGood stiffnessNucleatedAntistatic propertiesHeterophasic copolymer

Typical Applications:Injection Molded caps and closuresSports, Leisure and toysHousewaresTWIM food containers


JJaammppiilleenn EEPPXX--554488TT






Description: ″Jampilen EPX-548T″ is a high melt flow rate, nucleatedheterophasic copolymer with a special antistatic additivationused for thin-wall injection molding, IML and housewareapplications. The product features improved balance ofmechanical properties. The use of ″Jampilen EPX-548T″allows high productivity due to the easy mold filling and shortcycle times.In comparison with conventional copolymers with the sameMFR and the same toughness, ″Jampilen EPX-548T″ exhibits15% higher rigidity.″Jampilen EPX-548T″ is suitable for food contact.


Features:High fluidityEasy mold filling and short cycle timesDesirable impact/ stiffness balanceGood dimensional stabilityUnspecified antistatic propertiesHeterophasic copolymer

Typical Applications:TWIM/IML food containers (Margarine tubs, yoghurt pots,pots for soft cheese, pudding, etc.)HousewaresCaps and closuresFlower pots and cool boxesSports, leisure and toys

Approval: Food


JJaammppiilleenn EEPP334488UU



MechanicalFlexural Modulus 1200 MPa ASTM D790Tensile Strength at Yield 24 MPa ASTM D638Tensile Elongation at Yield 6 % ASTM D638Izod Impact Strength (notched) at 23 oC 70 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 35 J/m ASTM D256Rockwell Hardness 86 R-Scale ASTM D785ThermalVicat softening point (10N) 148 oC ASTM D1525H.D.T. (0.46 Mpa) 100 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hours ASTM D3012OpticalGloss (60o) 65 ---- ASTM D2457

No. 5, North-Falamak St., Eyvanak Blvd., Farahzadi Blvd., Shahrak-e-Qods., Tehran, 1467715171, Iran.Tel: +9821-84286, Fax: +9821-88563100Email: [email protected] data and information is considered to be correct and offered in good faith as a guide. But we do not warrant or otherwise guarantee themerchantability, fitness for a particular purpose or suitability of this information, products or processes described.

Description: ″Jampilen EP348U″ is a nucleated, antistatic formulated, veryhigh melt flow rate heterophasic polypropylene copolymer.The product features excellent impact resistance, even at lowtemperatures. ″Jampilen EP348U″ is specifically designed forhigh speed thin-walled injection molding.The very high fluidity, the molecular design and specificformulation of ″Jampilen EP348U″ result in very easyprocessing, short cycle times, low shrinkage and minimalwarpage. This allows a great design freedom and imparts gooddimensional stability of the molded items. Items made with thisgrade feature excellent mechanical properties over a widetemperature range and very good low temperatureperformance. The ductile brittle transition temperature is wellbelow -40°C. To obtain the best results in injection molding,″Jampilen EP348U″ processing temperature should not exceed240-250°C.


Features: Excellent impact resistanceVery high fluidityGood dimensional stabilityVery good low temperature performanceHeterophasic copolymer

Typical Applications: Thin-walled packagingMargarine tubs, pots for dairy products, ice-cream containers,trays, CD and DVD envelopesLids, caps and closuresHousewares, lunch-boxes, cool boxesSmall buckets, laundry baskets, toy boxes and flower pots

Approval: Food


JJaammppiilleenn EEPP664488VV



MechanicalFlexural Modulus 1550 MPa ASTM D790Tensile Strength at Yield 31 MPa ASTM D638Tensile Elongation at Yield 6 % ASTM D638Izod Impact Strength (notched) at 23 oC 35 J/m ASTM D256Rockwell Hardness 105 R-Scale ASTM D785ThermalVicat softening point (10N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 115 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hours ASTM D3012OpticalGloss (60o) 75 ----- ASTM D2457



Description: ″Jampilen EP648V″ is a nucleated, antistatic formulated, ultrahigh fluidity heterophasic copolymer designed for thin-walledinjection molding applications. The product offers goodstiffness/impact balance, good dimensional stability andoutstanding antistatic properties. ″Jampilen EP648V″ offers thetypical advantages of PP such as low odour transfer, nomonomer migration, excellent stress cracking resistance andhigh chemical resistance, as well.The ultra high MFR and the specific formulation of″Jampilen EP648V″ result in very easy mold filling, short cycletimes, low shrinkage and low warpage. The finished itemsshow excellent dimensional stability, good surface finish andhigh antistatic properties.″Jampilen EP648V″ is mainly used for packaging, housewaresand garden furniture. The most typical applications are itemswith long flow paths such as laundry bins, drawer trays, toyboxes, small containers, CD and DVD boxes, margarine tubsand packaging for dairy products.″Jampilen EP648V″ is suitable for food contact.


Features: Ultra high fluidityGood stiffness/impact balanceGood dimensional stabilityGood antistatic propertiesHeterophasic copolymer

Typical Applications: Thin-walled packagingPackaging, housewares and garden furnitureLaundry bins, drawer trays, toy boxes, small containers, CDand DVD boxes, margarine tubsOpaque containers for dairy products

Approval: Food


JJaammppiilleenn HH11002222


MechanicalTensile Modulus (1 mm/min) 1100 MPa ISO 527-1, -2Tensile Strength at Yield (50 mm/min) 25 MPa ISO 527-1, -2Tensile Elongation at Yield (50 mm/min) 10 % ISO 527-1, -2Tensile Creep Modulus 1h 1020 MPa ISO 899-1Tensile Creep Modulus 1000h 500 MPa ISO 899-1Charpy impact strength (notched) ISO 179

23°C 35 kJ/m2

0°C 7 kJ/m2

-30°C 3 kJ/m2

Hardness (Shore D) 66 ----- ISO 868ThermalVicat softening point A50 149 oC ISO 306H.D.T. B (0.45 MPa) 75 oC ISO 75B-1, -2Melting Temperature 165 oC ISO 3146



Description:

″Jampilen H1022″ is a natural polypropylene block copolymerwith high melt viscosity and excellent low-temperature impactstrength. It contains basic stabilization additives.

Processing Method:Extrusion (Sheet, Profile)

Features:

High melt viscosityExcellent low-temperature impact strengthHeterophasic copolymer

Typical Applications:Rigid profiles and sheet


JJaammppiilleenn HH22446644


MechanicalTensile Modulus (1 mm/min) 1350 MPa ISO 527-1, -2Tensile Strength at Yield (50 mm/min) 29 MPa ISO 527-1, -2Tensile Elongation at Yield (50 mm/min) 10 % ISO 527-1, -2Tensile Elongation at Break (50 mm/min) 400 % ISO 527-1, -2Flexural Modulus (2 mm/min) 1450 MPa ISO 178Izod impact strength (Notched)

ISO 180

23°C 66 kJ/m2

0°C 35 kJ/m2

-20°C 17 kJ/m2

-30°C 9 kJ/m2

ThermalOxidation induction time (OIT) (200°C) > 30 min EN 728Oxidation induction time (OIT) (210°C) > 15 min EN 728



Description: ″Jampilen H2464″ is a natural polypropylene copolymer withexceptional balance of mechanical properties. The product hasbeen specifically designed for extrusion of structured wall pipesfor underground drainage and sewage applications but can alsobe used for other extrusion applications. The product provideshigh stiffness, excellent impact resistance at room temperatureand in particular at sub-zero temperatures with high heat- andextraction stability.

Processing Method:Extrusion (pipe, sheet, profile)

Features:

High melt viscosityExcellent impact resistanceHigh stiffnesshigh heat and extraction stabilityHeterophasic copolymer

Typical Applications:Underground drainage and sewage pipesSheet and profiles


JJaammppiilleenn EEPPDD6600RR



MechanicalFlexural Modulus 1100 MPa ASTM D790Tensile Strength at Yield 27 MPa ASTM D638Tensile Elongation at Yield 15 % ASTM D638Izod Impact Strength (notched) at 23 oC 750 J/m ASTM D256Izod Impact Strength (notched) at 0 oC 350 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 80 J/m ASTM D256Rockwell Hardness 77 R-Scale ASTM D785ThermalVicat softening point (10N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 85 oC ASTM D648Accelerated oven ageing in air at 150 oC 1800 hours ASTM D3012

No. 5, North-Falamak St., Eyvanak Blvd., Farahzadi Blvd., Shahrak-e-Qods., Tehran, 1467715171, Iran.Tel: +9821-84286, Fax: +9821-88563100Email: [email protected] data and information is considered to be correct and offered in good faith as a guide. But we do not warrant or otherwise guarantee themerchantability, fitness for a particular purpose or suitability of this information, products or processes described.

Description: ″Jampilen EPD60R″ is a high molecular weight heterophasiccopolymer for blow molding and extrusion and is designed toproduce items with superior toughness, even at lowtemperatures. ″Jampilen EPD60R″ exhibits excellent heat anddetergent resistance. Due to its excellent impact strength and itsparticular formulation, ″Jampilen EPD60R″ is well suited forextrusion blow molding of appliance components, wheels,under-the-hood automotive parts, toolboxes, suitcases and largecontainers. Extrusion applications of ″Jampilen EPD60R″include profiles, pipes and tough sheet for industrialapplications. Sheet produced with ″Jampilen EPD60R″ is alsowell suited for thermoforming trays for cold storage.″Jampilen EPD60R″ can be compression molded into thicksheet. ″Jampilen EPD60R″ is suitable for food contact but notintended for medical and pharmaceutical applications.

Processing Method: Extrusion (pipe, sheet)ThermoformingCompression moldingBlow molding

Features: High molecular weightExcellent heat and detergent resistanceExcellent toughnessHeterophasic copolymer

Typical Applications: Appliance componentsUnder-the-hood automotive partsToolboxes, suitcases, wheels and large containersProfiles and tough sheet for industrial applicationsIndustrial, soil and waste pipeThermoformed trays for cold storage cartonsThick sheet

Approval:Food


JJaammppiilleenn EEPP330000DD



MechanicalFlexural Modulus 1250 MPa ASTM D790Tensile Strength at Yield 30 MPa ASTM D638Tensile Elongation at Yield 13 % ASTM D638Izod Impact Strength (notched) at 23 oC 600 J/m ASTM D256Izod Impact Strength (notched) at 0 oC 130 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 50 J/m ASTM D256Rockwell Hardness 90 R-Scale ASTM D785ThermalVicat softening point (10 N) 152 oC ASTM D1525H.D.T. (0.46 Mpa) 90 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description: ″Jampilen EP300D″ is a high molecular weight, heterophasicpolypropylene copolymer designed for extrusion applicationswhich require a balance of high stiffness and very good impactstrength. ″Jampilen EP300D″ offers excellent processability inextrusion. The final items show very good mechanicalproperties, even at temperatures down to -20oC.Major Applications of ″Jampilen EP300D″ are profiles, pipes,ducts for electrical distribution and automotive parts. Thisgrade is also used for extrusion blow molding pigmented,glossy monolayer bottles for toiletries, detergents andfoodstuffs. ″Jampilen EP300D″ is also well suited forcorrugated board and sheet for thermoforming.″Jampilen EP300D″ is suitable for food contact.

Processing Method: ExtrusionBlow molding

Features: High molecular weightHigh stiffnessVery good impact strengthExcellent processabilityHeterophasic copolymer

Typical Applications: Profiles, pipesDucts for electrical distribution and automotive partsGlossy monolayer bottles for toiletries, detergents andfoodstuffsCorrugated board and sheet for thermoforming

Approval:Food


JJaammppiilleenn EEPP331100DD


MechanicalFlexural Modulus 1150 MPa ASTM D790Tensile Strength at Yield (MD) 27 MPa ASTM D638Tensile Elongation at Yield 15 % ASTM D638Izod Impact Strength (notched) at 23 oC 650 J/m ASTM D256Izod Impact Strength (notched) at 0 oC 200 J/m ASTM D256Izod Impact Strength (notched) at -20 oC 70 J/m ASTM D256Rockwell Hardness 80 R-Scale ASTM D785ThermalVicat softening point (10N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 85 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012OpticalHaze (60 µm) 60 % ASTM D1003Gloss (60 µm) 12 ---- ASTM D2457



Description: ″Jampilen EP310D″ is a high molecular weight, heterophasicpolypropylene copolymer designed for extrusion applicationswhere smooth processability and high mechanical propertiesare of the utmost importance.The processability of ″Jampilen EP310D″ in extrusion isexcellent. The final items show good stiffness and very highimpact strength, even at -20°C. ″Jampilen EP310D″ isparticularly suitable for the extrusion of films for adhesivetapes and films for lamination to paper and other resins.Extrusion blow molded containers for detergents, toiletries andfoodstuffs and blow molded technical parts are among otherimportant applications.″Jampilen EP310D″ is suitable for food contact.

Processing Method: Extrusion blow moldingBlown filmInjection molding

Features: High molecular weightGood stiffnessExcellent processabilityVery high impact strengthHeterophasic copolymer

Typical Applications: Film for adhesive tapesFilm for lamination to paper and other resinsExtrusion blow molded containers for detergents, toiletries andfoodstuffBlow molded technical partsCorrugated board, smooth and corrugated pipe

Approval: Food


JJaammppiilleenn EEPP440000GG



MechanicalFlexural Modulus 1150 MPa ASTM D790Tensile Strength at Yield 27 MPa ASTM D638Tensile Elongation at Yield 13 % ASTM D638Izod Impact Strength (notched) at 23oC 650 J/m ASTM D256Izod Impact Strength (notched) at 0oC 130 J/m ASTM D256Izod Impact Strength (notched) at -20oC 60 J/m ASTM D256Rockwell Hardness 82 R Scale ASTM D785ThermalVicat softening point (10 N) 150 oC ASTM D1525H.D.T. (0.46 Mpa) 85 oC ASTM D648Accelerated oven ageing in air at 150 oC 360 hour ASTM D3012



Description:″Jampilen EP400G″ is a heterophasic polypropylenecopolymer designed for extrusion applications where smoothprocessability and a good balance of mechanical properties arerequired. ″Jampilen EP400G″ offers excellent processabilityand the final items show good stiffness and outstanding impactresistance, even at temperatures down to -20°C.The major applications of ″Jampilen EP400G″ are theproduction of corrugated board and the extrusion of sheet forthermoforming. Other applications include blow molded bottlesand containers for detergents and foodstuffs as well astechnical parts for the automotive and appliance industries.″Jampilen EP400G″ is suitable for food contact.

Processing Method: ExtrusionBlow molding

Features: Good stiffnessExcellent processabilityVery high impact strengthHeterophasic copolymer

Typical Applications: Corrugated boardSheet for thermoformingBlow molded bottles and containers for detergents andfoodstuffsTechnical parts for the automotive and appliance industries

Approval:Food

PPCO-DS-120/10 Jul 17

JJaammppiilleenn EEPP444400GG





Description: ″Jampilen EP440G″ is a nucleated heterophasic copolymerespecially developed for extrusion applications.In comparison with standard polypropylene copolymers withthe same fluidity, ″Jampilen EP440G″ exhibits higher stiffness,superior impact properties at room and sub-zero temperatures,very high dimensional stability and excellent creep anddeforming resistance. The main applications of ″JampilenEP440G″ are thermoforming, corrugated board and extrusionblow molding.

Processing Method:ThermoformingExtrusion blow moldingInjection molding

Features:Very high impact resistanceHigh stiffnessVery high dimensional stabilityExcellent creep and deforming resistanceHeterophasic copolymer

Typical Applications:Corrugated board, panels, profiles and cratesCorrugated pipes for automotive and machine constructionConduit pipes and fittings for electrical distribution and cableprotectionBlow molded bottles and containersPipe fittings


JJaammppiilleenn EEPP554488UU


MechanicalTensile Modulus 1550 MPa ISO 527-1, -2Tensile Strength at Yield 28 MPa ISO 527-1, -2Tensile Elongation at Yield 5 % ISO 527-1, -2Tensile Elongation at Break 30 % ISO 527-1, -2Charpy impact strength (Notch A) kJ/m2 ISO 179

23°C 5.00°C 3.5

-20°C 3.0Ball indentation hardness (H 358/30) 68 MPa ISO 2039-1ThermalVicat softening point A50 151 oC ISO 306H.D.T. B (0.45 MPa) 95 oC ISO 75B-1, -2



Description: ″Jampilen EP548U″ is a nucleated heterophasic copolymer,suitable for injection molding applications, and contains anantistatic agent. It exhibits outstanding balance of mechanicalproperties combined with high fluidity.″Jampilen EP548U″ is extensively used in housewares and inthin-walled containers for food packaging (e.g. margarine tubs,yoghurt pots, etc.).


Features:High flowNucleatedAntistatic propertiesHeterophasic copolymer

Typical Applications:ContainersSports, leisure and toysTWIM food containersHousewares

Approval:Food

Documents

HETEROPHASIC COPOLYMER Extrusion, Injection Thermoforming ... · Molding Extrusion, Thermoforming & Blow molding. PPCO-DS-60/03 Jun 13 Jampilen EP302K TYPICAL PROPERTIES VALUE UNIT