User GuideHERKIN-3000

ALWAYS HER SKIN WITH ‘

’

Herkin

-3000

2

Herkin-3000

General cosmetics do not permeate into skin deeply

although they are absorbed in the skin because there is

skin barrier in the epidermis to protect the skin.

Herkin helps necessary ingredients permeate into skin

deeply to make skin clearer and more resilient especially

when it is used with other general cosmetics.

Skin pores Sweat pores

Sweat gland

Epidermis (Keratinization*)

Sebaceous gland

Dermis(Skin resilience and

nutrition layer)

Subcutaneous tissue

*What Is Keratinization?

Keratinization means a process that skin cells are removed in the form of dandruff or dirt from stratum

corneum in the highest part of epidermis after they are generated and grow up in the Stratum Basale

in the lowest part of epidermis. The cycle of Keratinization is every month. Keratinization plays an

important role in maintaining skin smooth and bright without spots and making make-up look good.

Herkin

-3000

3

User Guide

1. Product Structure and Details ………………………………………… 4

2. Features of Herkin ………………………………………………………… 6

3. Functions of Ultrasonic Massager …………………………………… 7

4. Functions of Skin Scrubber …………………………………………… 8

5. Functions of Ion Twister (Roller) ……………………………………… 8

6. Names and Functions of Operation Board ……………………… 9

7. Preparation before Use ………………………………………………… 9

8. How to Use ………………………………………………………………… 9

9. How to Use ………………………………………………………………… 10

1. Skin Scrubber

2. Ultrasonic Massager

3. Ion Twister

10. Precautions for Use …………………………………………………… 16

11. Important Safety Precautions………………………………………… 18

Product Specification ……………………………………………………… 18

Product Warranty …………………………………………………………… 19

■ Please read page # 16 -18 all precautions for use

instructions information before use this product.

Contents

Herkin

-3000

4

Herkin-3000

■ Back side of main body ■ Power line

1. Product Structure and Details

Ion twister

Ground rod

Main bodyconnection part

Ion rollerIon cable

Power connection part Power on/off switch

Operation Part

Skin scrubber

Herkin

-3000

5

User Guide

▶ There may be some difference between the product figures showed in the user guide

and actual products.

■ Replacement of Ion Twister and Ion Roller

① Turn right and pull out the ion twister as showed in

the figure above.

② Insert and turn left the ion roller tightly.

Note) Be careful not to lose the bushing that helps user fix

a gauze.

■ Ion Cable Connection

The two jacks of ion cable look different. Please refer to the

user guide when you connect the cable jacks.

After using skin scrubber or ultrasonic massager, coil the lines of

those devices twice smoothly, make the letters printed on the grip

of them turn upwards and keep the lines in main body.

Ultrasonicmassager

Ion twister∙Ion rollerconnection hole

Bushing

Herkin

-3000

6

Herkin-3000

2. Features of Herkin

1) SummaryHERKIN is a kind of Personal Combined Stimulator for Medical use with three

functions such as ultrasonic massager, skin scrubber and ion.

2) Features and Merits of HerkinA lot of medical instruments including skin scrubber, ultrasonic massager and ion

devices have been introduced in the current market.

First, regarding the functions and use purposes of the devices, skin scrubber is

used to improve outside of skin by eliminating keratin and dirt from the skin;

ultrasonic massager is used to burn fat, to strengthen cytoplasm and to make the

blood circulate

more freely in skin; and Ion devices are used to help moisture and nutrient permeate

into skin and to eliminate waste matter in skin pores. Several effects of the devices

above are overlapped, but each device functions only for its main effect. Skin

scrubber functions differently from ultrasonic massager in effects due to different

vibration methods and frequencies. It is why a combinational stimulator like HERKIN

comes into the limelight today.

HERKIN is a device that can do the three functions mentioned above perfectly. For

instance, the external of skin is managed by skin scrubbing function and the internal

of skin by ultrasonic massage function. By permeating necessary materials into skin

deeply, the best same effect can be acquired just as each specialized device is

used.

Herkin

-3000

7

3. Functions of Ultrasonic Massager

▶ Skin Revitalization & Balancing of Skin Cycle

Ultrasonic waves head vibrates a million taps every second. This ultrasonic massager

activates revitalization cycle of skin and metabolism of mother cells. Ultimately it protects

skin from aging and losing moisture.

▶ Skin Whitening

Ultrasonic massager stimulates melanin separated from light color cells to go into blood

vessel or lymphatic vessel. It makes skin lighter naturally by removing melanin from

epidermis and dermis.

▶ Thermotherapy

Ultrasonic massager rises in temperature inside of skin and activates metabolism of cells.

So, it helps lymph circulate more freely and makes skin smoother.

▶ Cleansing

Ultrasonic massager has high frequency ultrasonic waves of about 1MHz that is general for

beauty instrument. Its high frequency ultrasonic waves makes sebum inside skin much

softer and easier to be picked out and helps the skin pores become cleaner.

▶ Skin Resilience

Ultrasonic massager activates old dermis and makes more resilient.

▶ Speeding up of Body Fat Catabolism and Reduction

Heat effect generated from ultrasonic massager makes unnecessary fat accumulated in

body be much easier to be eliminated. Minute vibration of ultrasonic waves speeds up fat

burning.

User Guide

Herkin

-3000

8

Herkin-3000

CLEANSING/SCALING ▶ Skin scrubber eliminates dirt and waste matter in skin pores. So, skin whitening

and peeling effects are expected.

▶ Scrubber vibration of 28,000 times every second helps new cells to be

generated by removing keratinocyte, sebum, toxicants, make-up from skin and

making nutrients permeate into skin deeply.

PERMEATION▶ Ultrasonic waves make skin-friendly elements permeate into body by

influencing barrier zone that protects skin from bacteria or chemicals

LIFTING▶ Intermittent stimuli is presented to skin from skin scrubber to make skin more

resilient.

Positive pole Effect (+)

▶ It makes skin cleaner by applying positive

electric current to electrode of twister and

eliminating waste matter from skin with inhalation

power of positive electric current of twister.

Negative pole Effect (-)

▶ VITAMIN C is water-soluble and exists in a state

of minus ion. When vitamin c is applied to face

with negative pole, repulsive power is generated

between vitamin c ion and negative pole. Then,

vitamin c can permeate into skin more easily

through barrier zone.

Ion Lifting Effect

▶ (+)(-) transposition accelerates skin cell

movement with electric stimuli and makes skin

more resilient.

4. Functions of Skin Scrubber

5. Functions of Ion Twister (Roller)

Electriccurrent

Electriccurrent

Permeation

Head side

Head sideRepulsivepower

Skin

Skin PermeatedVitamin Ion

Waste matter

Flowed-in Vitamin

Herkin

-3000

9

User Guide

Before using HERKIN, connect power supply line to INLET that is positioned on the

back side of product and connect power source code to indoor wall outlet.

Power is supplied to devices by lifting up power switch that is connected to INLET.

User can select necessary one among various functions. In case of conversion to

VITAMIN.ION after using SCRUBBER or conversion to SCRUBBER after using

VITAMIN.ION, the last-selected mode is available. (Level and time is initialized)

Two more functions cannot be operated simultaneously.

7. Preparation before Use

8. How to Use

(1) Check rated voltage (AC220V) and connect it to the connection part of main body.

(2) Take off all the metals (including accessories) attached to user's body.

(3) Before using a product, Please make each head and electrodes clean that touch skin

directly.

6. Names and Functions of Operation Board

(LOW, MEDIUM, HIGH)

Standby/ON button

Standby/ON button

Standby/ON button

Standby/ON button

1. Mode Selection Button

2. Level Selection Button

3. Scrubber

4. Sonic

5. Vitamin.Ion

A, B, C, D, E, F, G, H, I

(CLEANSING/SCALING, PERMEATION, LIFTING)

Herkin

-3000

10

Herkin-3000

1. Skin Scrubber

9. How to Use

CLEANSING/SCALING

PERMEATION/LIFTING

■ Before Use

� For sensitive skin, it is recommended to use ion roller at (+) mode rather than

to use skin scrubber at cleansing mode in order to lessen skin irritation.

� If you use skin scrubber too toughly, you can cause skin irritation and trouble.

Then your skin may become red. So please be careful when you are using a

skin scrubber.

Effect of removingkeratin from skin

Effect of light skinmassage

�

�

Herkin

-3000

11

User Guide

6

5

9

4 3

2

1

7 8

Apply clean

water, distilled

water or tonic

lotion to skin. � Please refer to page

8 for explanation of

each mode.

� It operates for 5

minutes from the

moment it is selected.

� One more push of the

button will make the

device stop.

▶Select Select Select

■ Use Direction

From inside to outside of skin, do the same as massaging direction

※ Note

� CLEANSING / SCALING - continuous output � PERMEATION - 10Hz intermittent output � LIFTING - 6.25Hz intermittent output

▶▶

Herkin

-3000

12

Herkin-3000

2. Ultrasonic Massager

Apply gel to the part

where ultrasonic

massager is used.

� Instead of gel, a product

containing moisture such as

massage cream, cleansing

cream or cosmeceuticals

can be used.

� It operates for 5 minutes

from the moment it is

selected.

� One more push of the

button will make the

device stop.

Select Select

� Ultrasonic massager does not need to set its functions separately.

� Please apply ultrasonic massager closely to necessary zones while moving the

massager at intervals of 3 cm every second.

� If ultrasonic gel is not used sufficiently, ultrasonic head and skin isn't cohesive

each other rightly. If so, ultrasonic waves may fail to be delivered to skin properly.

■ How to Confirm the Vibration of Ultrasonic Massager

� Drop some water on the head of ultrasonic massager that is in operation. If water

seems to boil, ultrasonic massager has no functional error.

■ Ultrasonic Gel

There are several reasons why ultrasonic gel must be used.

If ultrasonic massager is not used with gel, small gap is formed between head and

skin when applying the ultrasonic massager to skin. Accordingly, ultrasonic waves

are reflected and the ultrasonic waves transmission effect lowers.

So, user must use gel to minimize bubble formation between skin and head and to

apply ultrasonic massager to skin more smoothly. Moreover, ultrasonic gel shows

much better permeation effect than any other materials. And it does not cause

harmful effect such as skin trouble.

▶ ▶

Herkin

-3000

13

User Guide

■ Use Direction

1

5

2

3

4

Herkin

-3000

14

Herkin-3000

3. Ion Twister (Roller)

■ Before Use

� Confirm the connection status between ground rod or ion twister (ion roller) and

main body.

� Wrap dripping wet gauze around ground rod and grab the rod with a hand that is

not working now.

� Select a level that is most proper to you. Do not compare the levels with others.

� User may feel a little pricking. It is not a device error but a normal feeling.

� Use direction is same as scrubber's. (P. 11)

� Available products by modes

(+) mode: water, distilled water, Tonic lotion

(-) mode: liquid cosmeceuticals including vitamin C ample

(+), (-) mode: all products including water used for both (+) mode and (-) mode.

� Please refer to Page 8 for

explanation of each mode.

� It operates for 10 minutes from

the moment it is selected.

� One more push of the button will

make the device stop.

Select SelectSelect▶ ▶

Herkin

-3000

15

User Guide

Ion circulation map

Humanbody

Main body

Groun

d rod

� Apply cosmeceuticals of liquid or cream type to skin → Attach a wet gauze or mask

to face → Roll the face with ion roller just as doing massage. (Use Direction : P. 11)

� It can be used as mask pack, too.

■ When Using Ion Twister

■ When Using Ion Roller

Lower the bushing of ion

twister to confirm

whether there is a gap

in twister.

Insert wet gauze and

wrap it around an ion

twister.

Lift the bushing of

ion twister to fix

gauze and others.

▶ ▶

Herkin

-3000

16

Herkin-3000

(1) Precautions for Use1) Do not fix the device to one part while using the device. Move the device slowly in

operation. Otherwise, you may get scalded.

2) Do not apply the device to one part for more than 10 minutes.

3) If you want to apply the device to the part where you have already used thedevice, you must apply the device to the part after more than 5 hours.

4) If you feel something wrong with the device, you must stop using the device, turnoff it and contact our head office.

5) If the device contacts with other electric appliances, it may get out of order.

6) Stop using the device and disconnect power cord from wall outlet when lightningstarts in the sky.

7) Small amount of gel cannot make ultrasonic waves transmit into skin effectively. So,massage the skin with sufficient gel to make sure that gel membrane is formedbetween the device head and skin.

8) When you use the device again, you must turn it on after 5 minute turn-off time inorder to prevent inner parts from overheating. If the device is used without stop, itmay get out of order soon.

(2) Use Cautions1) Do not use the device for other purposes. It can cause an accident.

2) A person who cannot speak his/her mind due to paralysis must not use the device.

3) Do not use the device with other electric appliances (beauty instrument or heatingpad) at the same time. The device may get out of order.

4) Do not hit steel or other hard things with scrubber vibration panel, head or iontwister that touches skin directly.

5) Do not use the device in a place of high temperature, high humidity or a lot of dustsuch as bathroom, kitchen or car. The expected life span of the device can beshortened. And the device may get out of order.

6) If you didn't use the device for a long time, you must confirm whether the device issafe before you use it again.

7) Do not operate the device near electric products such as beauty appliances, TVand radio. Be careful not to connect several power cords to an outlet.

8) Do not put heavy things, water or drinking water on the main body. If liquid getsinto the main body, it can cause device breakdown.

9) Note that this product isn't medical instrument.

(3) Precautions for UsersIf you have sensitive skin, you may have a little skin trouble due to metal of thedevice. If your skin begins to have some trouble due to the device, please stop usingthe device for a time and use it again after 3 or 4 days.

The appliance has a heated surface. Persons insensitive to heat must be carefulwhen using the appliance.

10. Precautions for Use

Herkin

-3000

17

User Guide

▶ Any person having any of the following conditions must consult aphysician before use.1) A person whose skin becomes red and sunburnt skin smarts due to too much suntan.2) A person who is allergic to something and has sensitive skin. 3) A person who has an electric device such as pace maker in his/her body. 4) A person who uses an electric medical device such as artificial heart lung machine to

maintain his/her life. 5) A person who uses an electric medical device of embedded type such as

electrocardiogram machine. 6) A person who takes hormones such as steroid for a long time. 7) A person who has capillary telangiectasis among those who are suffering from liver

dysfunction.8) A person who is being treated at a hospital.9) A bodily part where pimples break out and inflammation starts.10) A bodily part where skin inflammation starts due to cosmetics. 1 1) A bodily part where there is discoloration with itching or discoloration caused by

physical stimuli. 12) A bodily part where metal, plastic or silicon is contained.13) A person who is suffering from hemophilia, heart disease, emesis or perception

disorder. 14) A bodily part where there is acute disease, bleeding, malignant tumor, fracture of a

bone, inflammation disease, trauma, eyelid and craniometry.

(4) Precautions for Repair1) Do not take a device to pieces or repair it at home. If a device gets out of order,

please stop using it and contact a selling agent where you purchased the device. 2) Do not drop the main body to the ground or strike against the device. 3) Shaking or striking against the device may harm the device and cause device

breakdown because precision parts are embedded in head, scrubber and ion twister. 4) Do not open the cover of the device. Disassembling the main body may cause an

electric shock.

5) If the supply cord is damaged, it must be replaced by a special cord or assemblyavailable from the manufacturer or its service agent.

(5) Precautions for Keeping1) Do not keep the device where temperature is too high or there is a lot of dirt. 2) Keep the device where children cannot touch it or there is no moisture. 3) Do not keep the device where magnetic or electromagnetic waves are generated.

The waves may cause device breakdown. 4) After using head, scrubber, ion twister and roller, wipe them with clean wet towel or

gauze and keep water off them. 5) Keep the device after turning off the power of main body. 6) Keep the device where there is no striking or vibration. 7) Do not use thinner, benzene or alcohol to wipe the device. Inflammables may cause

some chemical reaction such as decolorization and transformation to the device

Herkin

-3000

18

Herkin-3000

Product Specification

11.Important Safety Precautions

(1) Product Name, Model Name:� Combinational Stimulator for Medical Use by Personal, HERKIN-3000

(2) Manufacturer & Address:� Manufacturer : � Address:

(3) Use : Relief of general pain and muscular pain

(4) Weight : 2.35kg (5) Packaging Unit : 1 SET

(6) Other Items:① Form and Level of Protection from Electric Shock: Second class devices,

BF type installation part② Rated Voltage: ③ Consumption Power: 19.5W(Max)

【Ultrasonic Waves Part - Head】

- Operation Frequency: 1MHz- Effective Size Radiated: Within 3.5㎠ ± 10%- Effective Output: Less than 3W/㎠- Operation Time: 5 minutes

【Low Frequency Part】

- Operation Frequency: 500Hz- Maximum Output Voltage (0-Peak): 9.4 V- Maximum Output Current: 1mA- Operation Time: 10 minutes

▣ This device is a medical instrument.

When using electrical appliances, follow basic safety precautions to reduce the risk of fire,electrical shock, and/or injury:

1. READ INSTRUCTIONS - All the safety and operating instructions should be read beforethe unit is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained forfuture reference.

3. HEED WARNINGS - All warnings on the unit instructions should be followed.4. FOLLOW INSTRUCTIONS - All warnings on the unit and in the operating instructions

should be followed.5. CLEANING - Unplug this unit near from the wall outlet before cleaning. DO NOT use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.6. ATTACHMENTS - Do not use attachments unless recommended by the unit's

manufacturer as they may cause hazards.7. ACCESSORIES - Do not place this unit on an unstable cart, stand, tripod, bracket, or

table. The unit may fall, causing serious injury to a child or adult as well as seriousdamage to the unit. Use this unit only with a cart, stand, tripod, bracket, or tablerecommended by the manufacturer.

B-603, 604 Ssangyong IT Twin Tower,442-5 Sangdaewon-dong, Joung won-Gu, Songnam-si, Kyounggi-Do, Republic of Korea A/S : 82-31-604-5400~2 www.herk in.co.kr

www.spainventory.co