“Merry Little Christmas” CardHere Comes Santa Claus Collection

by Tya Smith

echo park paper co.

SUPPLIES:* Here Comes Santa Claus 6x6 Paper Pad* Here Comes Santa Claus Dark Red/Black Coordinating Solid* Here Comes Santa Claus Red/Lt Green * Here Comes Santa Claus Red/Lt Green Coordinating Solid* Here Comes Santa Claus Frames and Tags Ephemera* Here Comes Santa Claus Chipboard Phrases* Here Comes Santa Claus Element * Here Comes Santa Claus Element Sticker* Here Comes Santa Claus Deck the Halls Greenery Designer Die Set* Carta Bella Natural White Linen Card-stock* Black and White Gingham Ribbon* Cream Twine* Black Button* Gold Shimmer Ink Spray* Kraft Doily* Foam Tape * Manual Die Cut Machine

INSTRUCTIONS:1. Create a card base from the Natural White Linen Cardstock measuring 4 ¼” x 5 ½”.2. From the Dark Red/Black Coordinating Cardstock, cut a piece of paper measuring 4”x 5 ¼”. Place on top of Natural White Linen Cardstock.3. Create ink splatters on black paper with the Gold Shimmer Ink Spray.4. Locate the Merry and Bright paper (green plaid side) from the 6x6 Paper Pad. Cut a 1 ¼ “x 2 ¾ “piece 4. Locate the Merry and Bright paper (green plaid side) from the 6x6 Paper Pad. Cut a 1 ¼ “x 2 ¾ “piece of paper. Notch the ends on one side to make a banner. 5. Glue a Kraft Doily to the center of the card. On the top right side, glue down the green plaid paper banner.6. Locate the Christmas Plaid Paper from the 6x6 Paper Pad. Cut a piece of paper measuring 3”x4 ¼”. Glue this paper to the bottom edge of the card.7. Locate the red and white stripe label from the Frames and Tags Ephemera. Add the die cut to the 7. Locate the red and white stripe label from the Frames and Tags Ephemera. Add the die cut to the center of the card with foam tape.8. Locate the smaller version of the 4x6 Journaling Card paper from the 6x6 Paper Pad. On the top right corner is a black and red Poinsettia card. Cut this out and glue to the center of the red and white stripe label. 9. Locate the “Have Yourself a Merry Little Christmas” label from from the Chipboard Phrases.10. Locate the Red/Light Green Coordinating Solid paper. Locate the pine bough die from the “Deck 10. Locate the Red/Light Green Coordinating Solid paper. Locate the pine bough die from the “Deck the Halls Greenery” die set. Using a manual die cutting machine, cut out 2 of the pine boughs and trim so you end up with 6 smaller pine boughs. Glue the pine boughs to the back of the Chipboard Phrase. Add this piece to the center of the card. 11. Locate the Nutcracker from the Element Sticker Sheet. Add foam tape to the back of the sticker and add to the left of the Chipboard Phrase.12. Create a layered bow with some black and white gingham ribbon, some cream twine and a button. 12. Create a layered bow with some black and white gingham ribbon, some cream twine and a button. Using strong glue, add the bow to the bottom left corner of the card.

Echo Park Paper Co. | Copyright © 2019 | All Rights Reserved