Upload
lethu
View
283
Download
1
Embed Size (px)
Citation preview
HENDERSON WHEEL &WAREHOUSE SUPPLY
2013 ALCOA
WHEEL CATALOGMarch 2013
Featuring:
Alcoa LvL ONE, Dura-Bright, Dura-Flange Wheels & Finish Options Page 1
Rim to Tire Matching Chart Page 2
Alcoa 8 and 10 Hole Hub Piloted WheelsPage 3
Alcoa Wide Base Hub Piloted WheelsPages 4 - 5
Alcoa 10 Hole Stud Piloted WheelsPage 6
Alcoa Wide Base Stud Piloted WheelsPages 7 - 8
Alcoa Medium Duty WheelsPage 9
Alcoa Forged Application GuidePages 10 - 11
Alcoa Forged Wheel SpecsPage 12
Lug Nuts, Lug Nut Covers & Hub CapsPages 13 - 16
Page 1
March 2013
ALCOA LVL ONE WHEELS
One look at the LvL One Wheel's finish tells you this all-purpose commercial wheel is different: • Industry's lightest commercial wheel by two pounds • Increases payload • Improves fuel efficiency • Six times brighter than the competitive wheel • Stronger and lasts longer than steel • Less maintenance • LvL ONE finish on both sides for any wheel position
ALCOA DURA-BRIGHT WHEELS WITH XBR TECHNOLOGY
Alcoa's patented Dura-Bright surface treatment allows easy cleaning - just use soap and water for a long-lasting, beautiful shine! And Dura-Bright wheels are no 53% more reflective than the first generation that truckers have loved mile-after-mile. Since Alcoa's Dura-Bright pen-etrates the aluminum, it won't crack, chip, peel or corrode - and it never needs polishing to maintain that sparkling appearance.
ALCOA DURA-FLANGE WHEELS
Specially treated to reduce or eliminate rim flange wear. Alcoa Dura-Flange wear protection wheels have half the rim flange wear of traditional aluminum wheels - or less. This design feature makes Dura-Flange wear protection wheels most appropriate for applications where loads are heavy and prone to shifting, causing tire walls to rub against the wheel rims. Alcoa Dura-Flange wear protection wheels are the only aluminum wheels on the market today that are protected from this type of wear, giving them at least double the life of other aluminum wheels in applications like transit bus, tanker and heavy hauling.
ALCOA FINISH OPTIONS
If the last digit in the part number is this, the finish is
0 - Brushed finish both sides as applicable 9 - Brushed finish in the inset position of a widebase wheel1 - Polished outside only DB - Dura-Bright2 - Polished inside only (same side as roll stamp) DF - Dura-Flange Wear Protection3 - Polished both sides DD - Dura-Bright and Dura-Flange 7 - LvL One finish on both sides as applicable* Wear Protection8 - LvL One finish in the inset position of a widebase wheel
*0 and 7 finish options on wide base wheel are finished in the outset position only.
Page 2
March 2013
Page 3
March 2013
ALCOA HUB-PILOTED EIGHT HOLE WHEEL275 mm (10.827") Bolt Circle221.1 mm (8.709") Center Bore(Special Order)
Wheel Size Part No. Finish Capacities
22.5" x 7.5" 873400 Machine Finish 7300 lbs. 873401 Outside Polish 873402 Inside Polish
22.5" x 8.25" 883440 Machine Finish 7400 lbs. 883401 Outside Polish 883402 Inside Polish
24.5" x 8.25" 982477 Lvl One 7300 lbs.
ALCOA HUB-PILOTED TEN HOLE WHEEL285.75 mm (11.25") Bolt Circle 220.1 mm (8.669") Center Bore
Wheel Size Part No Finish Additional Finish Capacity Options
22.5" x 8.25" 883677 Lvl One DF* 7400 lbs 883670 Machine Finish DB Only* 7400 lbs 883671 Outside Polish DB, DD*, DF* 7400 lbs 883672 Inside Polish DB*, DD*, DF* 7400 lbs 883673* Polished Both Sides DB*, DD*
22.5" x 9" 894647 Lvl One DF* 10,000 lbs 894640 Machine Finish DB*, DD*, DF* 10,000 lbs 894641* Outside Polish DB*, DD*, DF* 10,000 lbs 894642* Inside Polish DB*, DD*, DF* 10,000 lbs 894643* Polished Both Sides DB*, DD*, DF* 10,000 lbs
24.5" x 8.25" 983677 Lvl One DF* 7850 lbs 983670 Machine Finish DB Only* 7850 lbs 983671 Outside Polish DB*, DF* 7850 lbs 983672 Inside Polish DB*, DF* 7850 lbs 983673* Polished Both Sides DB*, DF* 7850 lbs
*Special Order
Page 4
March 2013
ALCOA HUB PILOTED WIDE BASE WHEEL: TRAILER USE ONLY
Center Disc Super Single Wheel10-Hole 285.75 mm (11.25")220.1 mm (8.669") Center Bore
Approx. 6-1/2"
Must consider tire clearances when switching to wide base wheels.
Wheel Size Part No. Finish Additional Finish Capacity Options
22.5" x 12.25" 822627 Lvl One 2* 12,300 lbs.
*Special Order
822627
ALCOA HUB-PILOTED WIDE BASE WHEEL: FRONT, REAR & TRAILER
Outset Wide Base Wheel Super Single 10-Hole 285.75 mm (11.25") Bolt Circle 220.1 mm (8.669") Center Bore
823627
Wheel Size Part No. Finish Additional Finish Capacity Options
22.5" x 12.25" 823627 Lvl One ODB*, 1*,1DB* 12,300 lbs. 1DF*, 2*, 2DB* , 2DF* 7DF*, 8*, 8DF*, 9DB*
*Special Order
Approx. 3"
Page 5
March 2013
ALCOA HUB-PILOTED WIDE BASE WHEEL
Steering Axle Duplex Wheel10 Hole 285.75 mm (11.25") Bolt Circle 220.1 mm (8.669") Center Bore
Must consider tire clearances when switching to duplex wheels.
Wheel Size Part No. Finish Additional Finish Capacity Options
22.5" x 12.25" 824627 Lvl One 0DB*, 1*, 1DB* 12,300 lbs. 1DF*, 7DF*
*Special Order
Approx. 1"
824627ALCOA HUB-PILOTED WIDE BASE WHEEL: TRACTOR & TRAILER WHEELS
22.5" x 14" Super Single Wheel10-Hole 285.75 mm (11.25") Bolt Circle 220.1 mm (8.669") Center Bore
Wheel Size Part No. Application Finish Additional Finish Capacity Options
22.5" x 14" 840627 Tractor Lvl One 0DB*, 2*, 2DB* 12,800 lbs 7DF*
22.5"x 14" 840607 Trailer LvL One 0DB*, 1*, 1DB* 12,800 lbs 1DF*, 2*, 2DB*, 7DF* 8*, 8DF*, 9DB*
*Special Order
Page 6
March 2013
ALCOA STUD-PILOTED TEN HOLE WHEEL
11.25" Bolt Circle 8.73" Center Bore
Wheel Size Regular Finish Additional Finish Capacity Options
22.5" x 8.25" 883110 Machine Finish DB* 7200 lbs.
883111* Outside Polish DB* 7200 lbs.
883112* Inside Polish DB* 7200 lbs.
22.5" x 9.00" 893000 Machine Finish 9000 lbs.
893001* Outside Polish 9000 lbs.
893002* Inside Polish 9000 lbs. 24.5" x 8.25" 983120 Machine Finish 7200 lbs.
983121* Outside Polish 7200 lbs.
983122* Inside Polish 7200 lbs.
*Special Order
Page 7
March 2013
ALCOA STUD PILOTED WIDE BASE WHEEL: FRONT, REAR & TRAILER
Outset Wide Base Wheel / Super Single 10-Hole 11.25"Bolt Circle /8.73" Center Bore
Wheel Size Part No. Finsh Additional Finish Capacity Options
22.5" x 12.25" 823050 Machine 1*, 2*, 9* 11,400 lbs
*Special Order
Must consider tire clearances when switching to wide base wheels.
823050
Approx. 3"
Page 8
March 2013
Approx. 1"
ALCOA STUD PILOTED STEERING AXLE DUPLEX WHEEL
10-Hole 11.25"Bolt Circle / 8.73" Center BoreOutset Wide Base Wheel / Super Single
Wheel Size Part No. Finish Additional Finish Capacity Options
22.5" x 12.25" 823060A Machine 1* 11,000 lbs.
*Special Order
Must consider tire clearances when switching to wide base wheels.
Page 9
March 2013
ALCOA MEDIUM DUTY WHEELS (All Special Order)
Hub-Piloted Wheel
Wheel Size Part No Finish Bolt Holes Bolt Circle Bore Capacity 16" x 5.5" 250800 Machine 6 205mm 161.1mm 2340 lbs 250801 Outside Polish 6 205mm 161.1mm 2340 lbs 250802 Inside Polish 6 205mm 161.1mm 2340 lbs
17.5" x 6" 664800 Machine 6 205mm 160.3mm 4000 lbs 664801 Outside Polish 6 205mm 160.3mm 4000 lbs 664802 Inside Polish 6 205mm 160.3mm 4000 lbs
17.5" x 6.75" 663470 Machine 8 275mm 221.1mm 5510 lbs 663472 Inside Polish 8 275mm 221.1mm 5510 lbs
19.5" x 6" 763200 Machine 10 225mm 170.2mm 3750 lbs 763201 Outside Polish 10 225mm 170.2mm 3750 lbs 763202 Inside Polish 10 225mm 170.2mm 3750 lbs
19.5" x 6" 763800 Machine 8 225mm 170.3mm 3750 lbs 763801 Outside Polish 8 225mm 170.3mm 3750 lbs 763802 Inside Polish 8 225mm 170.3mm 3750 lbs
19.5 x 6.75" 765420 Machine 8 275mm 221.1mm 5000 lbs RW 765421 Outside Polish 8 275mm 221.1mm 5000 lbs 765422 Inside Polish 8 275mm 221.1mm 5000 lbs
19.5" x 7.5" 773620 Machine 10 285.75mm 220.1mm 6700 lbs RW 773621 Outside Polish 10 285.75mm 220.1mm 6700 lbs 773622 Inside Polish 10 285.75mm 220.1mm 6700 lbs
Stud-Piloted Wheel
Wheel Size Part No Finish Bolt Holes Bolt Circle Bore Capacity 17.5" x 6.75" 663070 Machine 10 8.75 6.495 5070 lbs 663072 Inside Polish 10 8.75 6.495 5070 lbs
Page 10
March 2013A
LCO
A FO
RG
ED A
PPLI
CAT
ION
GU
IDE
Vehi
cle
Info
rmat
ion
Lt T
ruck
/Suv
D
ually
(acc
esso
ries
not i
nclu
ded)
Mak
e
Mod
el
M
Y B
P D
rive
Axl
e H
ub
Lug
Nut
Cla
ssic
Cla
ssic
Siz
e
Th
read
Che
vrol
et
Ava
lanc
e 25
00 P
icku
p
02
-09
8x6.
5 4x
2, 4
x4
Sin
gle
4.92
M
14X
1.5
167
041
16
x7J
Che
vrol
et
C-2
500H
D, K
-250
0Hd,
Pic
kup
- 8 lu
g 88
-00
8x6.
5 4x
2, 4
x4
Sin
gle
4.60
M
14X
1.5
167
041
16
x7J
Che
vrol
et
C-3
500,
K-3
500
Pic
kup
88
-00
8x6.
5 4x
2, 4
x4
Sin
gle
4.61
M
14X
1.5
167
041
16
x7J
Che
vrol
et
G30
Cha
ssis
91
-04
8x6.
5 4x
2, 4
x4
Sin
gle
4.61
M
14X
1.5
167
041
16
x7J
Che
vrol
et
GE
GS
2500
Van
, P25
00 S
tep
Van
71-9
5 8x
6.5
4x2
Sin
gle
4.61
9/
16X
18
1
6704
1
16x7
JC
hevr
olet
G
E G
S25
00 V
an, P
2500
Ste
p Va
n 96
-04
8x6.
5 4x
2
Sin
gle
4.61
M
14X
1.5
167
041
16
x7J
Che
vrol
et
Silv
erad
o C
-350
0, K
-350
0 P
icku
p
08-0
9 8x
6.5
4x2,
4x4
D
ual
4.60
M
14X
1.5
1764
31 (F
) - 1
7643
2 (R
) 17
X6.
5C
hevr
olet
S
ubur
ban
K25
00 S
UV
88-9
1 8x
6.5
4x4
Sin
gle
4.61
9/
16X
18
1
6704
1
16x7
JC
hevr
olet
S
ubur
ban
K25
00 S
UV
92-9
9 8x
6.5
4x4
Sin
gle
4.61
M
14X
1.5
167
041
16
x7J
D
odge
Ram
250
0 P
icku
p
46
-93
8x6.
5 4x
2, 4
x4
Sin
gle
4.80
9/
16x1
8
167
041
16
x7J
Dod
ge
R
am 2
500
Van/
Wag
on
46
-93
8x6.
5 4x
2
Sin
gle
4.80
9/
16x1
8
167
041
16
x7J
Dod
ge
R
am 3
500
Pic
kup
46-9
3 8x
6.5
4x2,
4x4
S
ingl
e 4.
80
9/16
x18
1
6704
1
16x7
JD
odge
Ram
350
0 P
icku
p
03
-09
8x6.
5 4x
2, 4
x4
Dua
l 4.
77
9/16
x18
176
421
(F) -
176
422
(R)
17X
6.5
Dod
ge
R
am 3
500
Van/
Wag
on
46
-93
8x6.
5 4x
2
Sin
gle
4.80
9/
16x1
8
167
041
16
x7J
Dod
ge
R
am B
300/
350
Van/
Wag
on
73
-00
8x6.
5 4x
2, 4
x4
Sin
gle
<5.1
6 1/
2x20
167
041
16
x7J
Dod
ge
R
am D
200/
250
Pic
kup
68
-93
8x6.
5 4x
2, 4
x4
Sin
gle
<5.1
6 1/
2x20
167
041
16
x7J
Dod
ge
R
am D
200/
250
Van/
Wag
on
68
-93
8x6.
5 4x
2, 4
x4
Sin
gle
<5.1
6 1/
2x20
167
041
16
x7J
Fo
rd
E20
0 S
uper
Dut
y E
cono
line
Wag
on/V
an
86-9
8 8x
6.5
4x2,
4x4
S
ingl
e <5
.16
9/16
x18
1
6704
1
16x7
JFo
rd
E25
0 S
uper
Dut
y E
cono
line
Wag
on/V
an
48-9
7 8x
6.5
4x2,
4x4
S
ingl
e <5
.16
9/16
x18
1
6704
1
16x7
JFo
rd
E30
0 S
uper
Dut
y E
cono
line
Wag
on/V
an
68-9
8 8x
6.5
4x2,
4x4
S
ingl
e <5
.16
9/16
x18
1
6704
1
16x7
JFo
rd
E35
0 S
uper
Dut
y E
cono
line
Wag
on/V
an
48-9
7 8x
6.5
4x2,
4x4
S
ingl
e <5
.16
9/16
x18
1
6704
1
16x7
JFo
rd
E35
0 S
uper
Dut
y E
cono
line
Wag
on/V
an
87-0
8 8x
6.5
4x2,
4x4
D
ual
4.88
9/
16x1
8
16
0241
(F) -
160
242
(R)
16x6
KFo
rd
E
450
Sup
er D
uty
Van
99
-08
8x6.
5 4x
2, 4
x4
Dua
l 4.
88
9/16
x18
1602
41 (F
) - 1
6024
2 (R
) 16
x6K
Ford
E45
0 S
uper
Dut
y Va
n
99-0
8 8x
6.5
4x2,
4x4
S
ingl
e <5
.16
9/16
x18
1
6704
1
16x7
JFo
rd
F
250
Sup
er D
uty
Pic
kup
48
-97
8x6.
5 4x
2, 4
x4
Sin
gle
<5.1
6 9/
16x1
8
167
041
16
x7J
Ford
F35
0 S
uper
Dut
y P
icku
p
48-9
7 8x
6.5
4x2,
4x4
S
ingl
e <5
.16
9/16
x18
1
6704
1
16x7
JFo
rd
F
350
Sup
er D
uty
Pic
kup
84
-98
8x6.
5 4x
2
Dua
l 4.
88
9/16
x18
1602
41 (F
) - 1
6024
2 (R
) 16
x6K
Ford
F35
0 S
uper
Dut
y P
icku
p
87-9
8 8x
6.5
4x4
Dua
l 4.
88
9/16
x18
1602
81 (F
) - 1
6028
2 (R
) 16
x6K
Ford
F35
0 S
uper
Dut
y P
icku
p
05-0
9 8x
7.87
4x
2, 4
x4
Dua
l 5.
60
M14
x1.5
17
6441
(F) -
176
442
(R)
17X
6.5
Ford
F45
0 S
uper
Dut
y Tr
uck
05
-08
10x8
.86
4x2,
4x4
D
ual
6.70
M
14x2
.0
7632
01 (F
) - 7
6320
2 (R
) 19
.5x6
Ford
F45
0 S
uper
Dut
y Tr
uck
00
-04
8x8.
86
4x2,
4x4
D
ual
6.70
M
14x2
.0
76
3800
,
19.5
x6
7638
01 (F
) - 7
6380
2 (R
) 19
.5x6
Ford
F55
0 S
uper
Dut
y Tr
uck
05
-08
10x8
.86
4x2,
4x4
D
ual
6.70
M
14x2
.0
7632
01 (F
) - 7
6320
2 (R
) 19
.5x6
Ford
F55
0 S
uper
Dut
y Tr
uck
00
-04
8x8.
86
4x2,
4x4
D
ual
6.70
M
14x2
.0
7638
01 (F
) - 7
6380
2 (R
) 19
.5x6
G
MC
C
-250
0HD
, K-2
500H
D P
icku
p 8-
lug
88-0
0 8x
6.5
4x2,
4x4
S
ingl
e 4.
61
M14
x1.5
167
041
16
x7J
GM
C
C35
00, K
-350
0 P
icku
p
88
-00
8x6.
5 4x
2, 4
x4
Sin
gle
4.61
M
14x1
.5
1
6704
1
16x7
JG
MC
S
ierr
a C
-350
0, K
-350
0 P
icku
p
08-0
9 8x
6.5
4x2,
4x4
D
ual
4.60
M
14x1
.5
1764
31 (F
) - 1
7643
2 (R
) 17
X6.
5Tr
aile
r 80
00 to
120
00 lb
. axl
es
Va
rious
8x
6.5
NA
Sin
gle
4.77
5/
8x18
661
401
17
.5x6
.75
Trai
ler
Up
to 7
000
lb. a
xles
Va
rious
8x
6.5
NA
Sin
gle
5.16
1/
2x20
665
401
17
.5x6
.75
Trai
ler
Up
to 7
000
lb. a
xles
Va
rious
8x
6.5
NA
Sin
gle
5.16
9/
16x1
8
665
401
17
.5x6
.75
Page 11
March 2013
ALCOA FORGED APPLICATION GUIDE - ACCESSORIESVehicle Information Lt Truck/Suv Dually Accessories for Classics (Not included with Wheel) (accessories not included) Make Model MY Classic Classic Front Cover Rear Cover Lug Nut Lug Nut Lug Nut Options Options Cover Torque (ft. (ft. lbs) Chevrolet Avalance 2500 Pickup 02-09 167041 3167,3267,4167 3167,4167 78 5014 100-110Chevrolet C-2500HD, K-2500Hd, Pickup - 8 lug 88-00 167041 3167,3267,4167 3167,4167 78 5014 100-110Chevrolet C-3500, K-3500 Pickup 88-00 167041 3167,3267,4167 3167,4167 78 5014 100-110Chevrolet G30 Chassis 91-04 167041 3167,3267,4167 3167,4167 78 5014 100-110Chevrolet GE GS2500 Van, P2500 Step Van 71-95 167041 3167,3267,4167 3167,4167 78 5916 120-140Chevrolet GE GS2500 Van, P2500 Step Van 96-04 167041 3167,3267,4167 3167,4167 78 5014 100-110Chevrolet Silverado C-3500, K-3500 Pickup 08-09 176431 (F) - 176432 (R) 3611 3612 190 139698 130-150Chevrolet Suburban K2500 SUV 88-91 167041 3167,3267,4167 3167,4167 78 5916 120-140Chevrolet Suburban K2500 SUV 92-99 167041 3167,3267,4167 3167,4167 78 5014 100-110 Dodge Ram 2500 Pickup 46-93 167041 3167,3267,4167 3167,4167 78 5916 120-140Dodge Ram 2500 Van/Wagon 46-93 167041 3167,3267,4167 3167,4167 78 5916 120-140Dodge Ram 3500 Pickup 46-93 167041 3167,3267,4167 3167,4167 78 5916 120-140Dodge Ram 3500 Pickup 03-09 176421 (F) - 176422 (R) 3611 3612 190 139987 130-150Dodge Ram 3500 Van/Wagon 46-93 167041 3167,3267,4167 3167,4167 78 5916 120-140Dodge Ram B300/350 Van/Wagon 73-00 167041 3167,3267,4167 3167,4167 78 5120 90-100Dodge Ram D200/250 Pickup 68-93 167041 3167,3267,4167 3167,4167 78 5120 90-100Dodge Ram D200/250 Van/Wagon 68-93 167041 3167,3267,4167 3167,4167 78 5120 90-100 Ford E200 Super Duty Econoline Wagon/Van 86-98 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford E250 Super Duty Econoline Wagon/Van 48-97 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford E300 Super Duty Econoline Wagon/Van 68-98 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford E350 Super Duty Econoline Wagon/Van 48-97 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford E350 Super Duty Econoline Wagon/Van 87-08 160241 (F) - 160242 (R) 1611,1681 1612 190 139987 130-150Ford E450 Super Duty Van 99-08 160241 (F) - 160242 (R) 1611,1681 1612 190 139987 130-150Ford E450 Super Duty Van 99-08 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford F250 Super Duty Pickup 48-97 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford F350 Super Duty Pickup 48-97 167041 3167,3267,4167 3167,4167 78 5916 120-140Ford F350 Super Duty Pickup 84-98 160241 (F) - 160242 (R) 1611,1681 1612 190 139987 130-150Ford F350 Super Duty Pickup 87-98 160281 (F) - 160282 (R) 1611,1681 1612 190 139987 130-150Ford F350 Super Duty Pickup 05-09 176441 (F) - 176442 (R) OEM OEM 190 139698 130-150Ford F450 Super Duty Truck 05-08 763201 (F) - 763202 (R) 001004 001005 NA 39913 130-150Ford F450 Super Duty Truck 00-04 763800, 1102* 1103* 190 39913 130-150 763801 (F) - 763802 (R)Ford F550 Super Duty Truck 05-08 763201 (F) - 763202 (R) OE OE NA 39913 130-150Ford F550 Super Duty Truck 00-04 763801 (F) - 763802 (R) 1102* 1103* 190 39913 130-150 GMC C-2500HD, K-2500HD Pickup 8-lug 88-00 167041 3167,3267,4167 3167,4167 78 5014 100-110GMC C3500, K-3500 Pickup 88-00 167041 3167,3267,4167 3167,4167 78 5014 100-110GMC Sierra C-3500, K-3500 Pickup 08-09 176431 (F) - 176432 (R) 3611 3612 190 139698 130-150Trailer 8000 to 12000 lb. axles Various 661401 1611,1612,1681 1611,1612,1681 190 39946 140-160Trailer Up to 7000 lb. axles Various 665401 3167,3267,4167,8167 8167 78 5120 90-100Trailer Up to 7000 lb. axles Various 665401 3167,3267,4167,8167 8167 78 5916 120-140
Notes:Before mounting the tire, perform a wheel fitment check to ensure proper clearance from obstructions. See Alcoa wheel service manuals and catalogs, your vehicle dealer or Alcoa representative for information on proper vehicle fitment procedures or before servicing thes wheels for proper load inflation and part compatibility information. Check with your dealer or Alcoa resources for proper load inflation and part compatibility information before servicing these wheels. Refer to the Alcoa Wheel Fitment Guide for detailed vehicle application, hardware and Alcoa accessory information. Please note: changing from original equipment tire size to aftermarket tire size can affect speedometer. Specifications are subject to change without notice. Do not exceed maximum wheel load. Compare OEM vehicle load rating to maximum wheel load rating. Do no overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Do not use abrassive polishes or cleaners on Clearcoat or Chrome wheels. Do not use Alcoa Aluminum Care System products on Clearcoat or Chrome wheels. Dually wheels have finish options - xxxxx(1) Polished Outside, xxxxx(2) Polished Inside, (R) is Rear, (F) is front. Some wheels also have an xxxxx(0) Machine Finish Offset (positive or negative) - The horizontal distance from the rim centerline to the mounting face of the wheel. Positive places the rim centerline inboard of the wheel mounting face. Negative places the rim centerline outboard of the wheel mounting face. Backspace - The horizontal distance from the wheel mounting surface to the inboard rim flange. Capacity ratings as single in highway service - bias-ply or radial. *1102 = 2 front axle end covers, 1103 = 2 rear axle end covers, Kit 110203 = two front axle end covers and two rear axle end covers **001004 = 2 front axle end covers, 001005 - rear axle end covers, Kit 100450 - two front axle end covers and two rear axle end covers
Page 12
March 2013
ALCOA FORGED WHEEL SPECIFICATIONS
Part Number Size Style Finish Bolt Circle Bolt Hole Bolt Hole Nut Seat Hub Backspace Offset-SRW Max. Wheel Max. Cold J2530 Max. Wheel Pilot Type Inches Dia Inches Bore Inches or Half Dual Load Inflaction Tire Weight Dia Space DRW Pounds PSI Dia mm Pounds Inches Inches 167041 16x7J Classic 8 Polish 8x6.5 0.62 60 degree conical 5.16 4.29 0.25 3750 110 NA 21 Stud160241(2) 16x6K Classic 8 Polish 8x6.5 0.67 Flat for 2pc lugnut 4.88 8.13 5.15 2780 95 NA 20 Hub160281(2) 16x6K Classic 8 Polish 8x6.5 0.67 Flat for 2pc lugnut 4.88 8.39 5.40 2780 95 NA 20 Hub176431 17x6.5 Classic 8 Polish 8x6.5 0.60 Flat for 2pc lugnut 4.60 8.81 5.59 3200 80 820 25 Hub176432 17x6.5 Classic 8 Polish 8x6.5 0.60 Flat for 2pc lugnut 4.60 8.81 5.59 3200 80 820 25 Hub176441 17x6.5 Classic 8 Polish 8x7.87 0.60 Flat for 2pc lugnut 5.60 8.81 5.59 3200 80 820 25 Hub176442 17x6.5 Classic 8 Polish 8x7.87 0.60 Flat for 2pc lugnut 5.60 8.81 5.59 3200 80 820 25 Hub176421 17x6.5 Classic 8 Polish 8x6.5 0.60 Flat for 2pc lugnut 4.77 8.81 5.59 3200 80 820 25 Hub176422 17x6.5 Classic 8 Polish 8x6.5 0.60 Flat for 2pc lugnut 4.77 8.81 5.59 3200 80 820 25 Hub661401 17.5x6.75 Classic 8 Polish 8x6.5 0.68 Flat for 2pc lugnut 4.77 4.06 0.00 6050 130 NA 30 Hub665401 17.5x6.75 Classic 8 Polish 8x6.5 0.62 60 degree conical 5.16 4.06 0.00 3500 130 NA 31 Stud763200(1,2) 19.5x6 Classic 8 Polish 10x8.85 0.60 Flat for 2pc lugnut 6.70 8.34 5.35 3750 110 NA 33 Hub763800(1,2) 19.5x6 Classic 8 Polish 8x8.85 0.60 Flat for 2pc lugnut 6.71 8.34 5.35 3750 110 NA 32 Hub
Page 13
March 2013
Description Part No. Thread Hex
Two-Piece 39874 M22 x 1.5 33 mm Washered Nut or E9020
HUB PILOT LUG NUTS
Description Part No. Thread Hex High
Hardened Outer & Front E5977-R & L 1-1/8"-16 1-1/2" 7/8" Cap Nut
Outer & Front *E5996-R & L 1-1/8" - 16 1-1/2" 1" Cap Nut
* For 22.5" x 9" Wheels. Also, for other wheels needing extra long grip nut.
STUD PILOT LUG NUTS
STUD PILOT LUG NUTS
Description Part No. Thread Thread O.A. O.D. I.D. Length
Hardened E5988-R & L 1-1/8"-16 3/4"-16 3-1/16" Inner Cap Nut Hardened Inner Cap Nut E7896-R & L 1-1/8"-16 3/4"-16 2-9/16" or Steel Inner Wheel & E7897-R & L 1-1/8"-16 3/4"-16 3-1/16" Aluminum Outer Wheel
Type Description Part No.
Hub Pilot 1-1/2" Hex Flange Nut 000182
Hub Pilot 33 mm Hex Flange Nut 000181
Stud Pilot 1-1/2" Hex 000150
HUG-A-LUG NUT COVERS
Page 14
March 2013
ALUMINUM WHEEL CAPS FOR ALCOA DUAL WHEELS
PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION
002167 Height: 5.875". Long Cap. 5.15" Hub Diameter. 8 on 6-1/2" Bolt Circle. Has Alcoa Medallion.
003167 Height: 4.7". 5.15" Hub Diameter. 8 on 6-1/2" Bolt Circle. Has Alcoa Medallion.
008167 Height: 4.65" 5.15" Hub Diameter 8 on 6-1/2" Bolt Circle. Open Cap.
001611 Height: 1.125". For Dodge/Ford dual wheel applications. 8 on 6-1/2" Bolt Circle. Has Alcoa Medallion.
001612 Height: 4.75". For Dodge/Ford dual wheel applications. 8 on 6-1/2" Bolt Circle. Has Alcoa Medallion.
001681 Height: 4.75". Open Cap for Dodge/Ford dual wheel applications. 8 on 6-1/2" Bolt Circle.
003611 Height: 1.125". For Chevrolet/GMC dual wheel applications. 8 on 6-1/2" Bolt Circle. Has Alcoa Medallion.
003612 Height: 4.750". For Chevrolet/GMC dual wheel applications. 8 on 6-1/2" Bolt Circle. Has Alcoa Medallion.
011911 Height: 1.5". Fits front 10 hole wheels. 10 on 7.25" Bolt Circle. Has Alcoa Medallion.
011912 Height: 5.375". Fits rear 10 hole wheels. 10 on 7.25" Bolt Circle. Has Alcoa Medallion.
Page 15
March 2013
ALCOA ONE-PIECE HUB COVER SYSTEM FOR HUB PILOT
10-Hole, 285.75mm22.5" and 24.5" Wheels
Description Part No. Finish
Front Axle Kit includes: Two front covers and one 086100S Chrome removal tool. Use a short handle rubber mallet for application.
Rear Axle Kit includes: Two rear covers and one 087100S Chromeremoval tool. Use a short handle rugbber mallet for application
It's a One-Piece Wonder
• Reduces installation time: 1 part vs. 11for fleets or owner operators.
• Patented On-Off Attachment System
• On-Off Removal for hub lube and DOT inspection
• Two-year warranty
Page 16
March 2013
ALCOA HUB COVER SYSTEM STUD PILOTED 10-HOLE 22.5" & 24.5" WHEELS
FRONT HUB CAPS
Part No Description Other Information
076155 1) Hub Cap 10) Hug-a-lugs
REAR HUB CAP
Part No Description Other Information
077155 1) Hub Cap 10) Hug-a-lugs
ALCOA HUB PILOT COVER SYSTEM HUB PILOTED10-HOLE 22.5" & 24.5" WHEELS
REAR HUB CAP
Part No Description Other Information
077188 1) Rear Hub Cap 10) Hug-a-Lugs
FRONT HUB CAPS
Part No Description Other Information
076188 1) Hub Cap 10) Hug-a-lugs
Page 17
March 2013
WARNINGWheel and tire servicing can be dangerous.To protect life and limb, be sure you understand and follow all mounting, demounting, maintenance, inspection, operational pro-cedures and safety instructions and practices.
For complete information contact:
Henderson Wheel & Warehouse Supply1825 South 300 WestSalt Lake City, UT 84115
or
Henderson Wheel & Supply112 West 34th StreetBoise, ID 83714
Ask for the following catalog:
"Alcoa Aluminum Truck Wheel Service Manual and Operating Instructions" or log on to www.strongwheels.com
Never mount 16.5" diameter tires on 16" diameter wheels.
Never mount 16" diameter tires on 16.5" diameter wheels.
Henderson Wheel and Warehouse Supply 1825 South 300 West • Salt Lake City, UT 84115
Tel: (801)486-2073 • Toll Free: (800)748-5111 • Fax: (801)486-0353
Henderson Parts Pros 3144 Grant Avenue • Ogden, UT 84401
Tel: (801)393-0440 • Toll Free: (800)627-3956 • Fax: (801)621-0781
Henderson Parts Pros 7480 South State Street • Midvale, UT 84047
Tel: (801)566-6566 • Fax: (801)352-2535
Henderson Parts Pros333 North State Street • Orem, UT 84057
Tel: (801)229-2333 • Toll Free: (888)586-8774 • Fax: (801)224-8612
Henderson Parts Pros4151 West 5415 South • Kearns, UT 84118Tel: (801) 965-1611 • Fax: (801)965-1616
Henderson Wheel & Supply 112 W. 34th Street • Boise, ID 83714
Tel: (208)344-6525 • Toll Free: (800)248-3444 • Fax: (208)336-1296
Henderson Trailer Supply 8235 Goldmine Avenue • Fontana, CA 92335
Tel: (909)232-8647 • Fax: (909)232-8649
Come see us at one of our seven
Henderson Locations: