Upload
vancong
View
227
Download
0
Embed Size (px)
Citation preview
62. IESELd dUSTn
HelmarH4000
SILICONESPRAY
HelmarH4000
SILICONESPRAY
Placing a hand full of clean brass at a time into a clean lastic bag re coated ith a er light dusting of HELMAR H400 silicone spray and tumbling by hand coats the outside of the case prior to full length case resizing (with neck sizing I have found that a light spray allowed to dry coating the e pander ball and walls of the die to be the best method It is worth mentioning that using a die that is kept clean will also prevent cases from sticking within the die while the use of a chamber brush is useful for cleaning inside the die when the de-capping rod is completely removed
This is a simple yet effective way of lubricating cases without the use of a water based case lube and creates a lot less mess than a lube pad.
To date I have experienced zero in the way of problems regarding powder ignition but I do stress that a little of this product goes a very long way. As for storing dies Helmar silicon spray offers a very effective barrier protecting dies from moisture and in-turn preventing rust from forming provided the die is clean and free
from moisture prior to storing. As a dry lubricant for reloading presses Helmar works very well applied under pressure it penetrates all the moving parts including linkages it also provides a dry lubricated coating to the shaft s as well as protecting the press from corrosion that is usually attributed to the salts contained in the moisture of the users hands.
Next issue we take a look at the protection Helmar H400 offers to your rods and reels.
click to go to website www.helmar.com.au