Embed Size (px)
Citation preview
UPPER RECEIVER
All Tools [email protected]
Experience fewer tool changes with uniquely designed multi-function specialty cutters
Experience 25% reduction in cycle times for the manufacturing of AR-15 upper and lower receivers with Helical Solutions and Harvey Tool
Helical Solutions & Harvey ToolAR-15 Collection
Turn multiple passes into a single pass with geometries that tackle
several operations at once
Extend tool life and increase abrasion resistance with Zplus coated tooling
Fewer Tool Changes | Fewer Passes | Extended Tool Life
All Tools Stocked
Lower Receiver
Proudly Distributed By :
AR
-15
Up
per
Rec
eive
r To
olin
gBarrel Nut Form Cutter | 84102
chamfer, thread diameter, & keyseat in one
Charging Handle Slot Cutter | 84099 cuts three passes down to one
Picatinny Rail Cutter | 84099
engineered sheer angle for faster S/F
Forward Assist Step Drill | 84101
two tools in one
Charging Slot Rough Mill | 82170 reduced tool pressure with chipbreakers
Charging Slot Rough Mill CT | 84103coolant through for better chip evacuation
Charging Slot Finish Mill | 84104 finishes grooves, walls, & floors in one pass
Radius Notch in Upper | 48416
3 flutes to center for plunging
Picatinny Slot Cutter
finishes groove, chamfer, & radius in one pass
Sharp: 864810-C8.005 Radius: 874410-C8.010 Radius: 862610-C8
AR
-15
Low
er R
ecei
ver
Too
ling
3/8-16 Thread Mill | 987164
designed for threading the buffer tube
3FL RN for Aluminum | 81490roughs & finishes trigger slots
3FL RN Chipbreaker | 82184
ideal choice for Mag Well trigger pocket
Ejector Clearance Cutter | 84098
cuts three passes down to one
9/16-18 Thread Mill - Barrel Nut | 70094suited to thread the barrel nut
3FL RN Coolant Through | 60050ideal choice for Mag Well trigger pocket
All Tools Stocked
