Height Safety Catalogue - Ferno Ferno Height Safety Ca… · enhance the safety and control of individuals whose undertaking involves personal risk and our aim is to provide them

Confined Space

Arbor

Fall Prevention

When it’s critical

Height Safety Catalogue

Rescue

1

Welcome to Ferno Australia’s second 2010 Height Safety Catalogue. In this catalogue is a new and unmatched choice of premium and high quality products, the result of our dedication to working with end users, industry experts and distributors to provide an ideal solution.

Ferno Australia’s height safety and fall protection solutions enhance the safety and control of individuals whose undertaking involves personal risk and our aim is to provide them with a single place they can begin their equipment and inventory planning.

What’s new in 2010Our second height safety catalogue for 2010 features a new range of rope access, rescue and tower harnesses, a new sit harness designed for the mining industry, a new side opening gate pulley, a complete new range of roof anchors and new controlled rate rescue ascend/descend devices amongst many others.

Quality tested products

Our harnesses and lanyards are designed and manufactured in Australia in our fully equipped facilities. They are produced according to AS/NZS ISO 9001:2000 quality assurance guidelines.

A growing demand for our height safety products among industries such as construction, mining, utilities and rescue resulted in Ferno needing to look internally to streamline design and testing processes so we could scale up our manufacturing capacity and fast-track distribution while maintaining consistency of product quality and reliability.

As such in 2009 Ferno applied and was awarded accreditation for AS/NZS4488.1 Industrial Rope Access Systems – Specifications (1997). This permits Ferno to test ascenders, descenders and rope grabs under Australia’s accreditation agency, National Association of Testing Authorities (NATA), which is a world-renowned testing authority. This new accreditation will be used in combination with Ferno’s existing AS/NZS1891.1 received in 2007 for testing of Industrial Safety Harnesses, Energy Absorbing Lanyards and Pole Straps, placing Ferno as 1 of only 6 NATA accredited testing laboratories in Australia certified to conduct testing on AS/NZS1891.1.

As a trusted name for over three decades, Ferno Australia has been proudly supplying high performance safety emergency and rescue devices across a wide range of industries.

Today, Ferno Australia distributes a complete line of ‘mission critical’ products around the globe, many of which are now the industry standard for their application owing to their unmatched quality, reliability and safety record.

With more than 1000 height safety products now available and around 10,000 products across our entire range, customers can be sure Ferno will have the required solution for any scenario where their safety is at risk. If you would like further information about Ferno Australia’s products or distributors please phone our customer service centre on 1800 804 647 or visit our website at www.ferno.com.au

© Ferno Australia Pty Ltd 2010

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the prior written consent of Ferno Australia. Whilst every care has been taken to prevent printing errors, colours and reproduction is subject to the usual tolerances of the printing process. Specifications may be changed in line with current legislations and standards E&OE.

Welcome

INDEX

1

Harnesses 2

Harness Accessories 10

Lanyards 12

Kits 17

Hardware 19

Roof Anchors & Brackets 30

Ladder Systems 32

Webbing Softgoods 33

Rope & Rope Care 35

Gloves & Bags 39

Rescue & Retrieval 41

Cool Vest 49

Arbor 50

Care of this equipment

This catalogue content contains life saving equipment. Failure to take suitable care could cause serious injury or death. Always inspect your equipment before use for any signs of wear and tear. If in doubt, retire the item. These products are susceptible to abrasion, corrosive chemicals and UV degradation. When stitching becomes frayed or damaged the product should be removed from service and evaluated and inspected by a competent person. Wash periodically in luke warm water and mild detergent such as Ferno Rope and Harness Wash. Air dry away from direct sunlight. Store your equipment out of direct sunlight and dust. Do not store equipment wet. Do not tumble dry or dry clean. If any of this equipment is subjected to a fall or impact it should be immediately removed from service and retired. It is recommended by the Australian Standard ASNZ 1891.1:2007 that all harnesses and webbing softgoods be inspected by a competent person every 6 months and harnesses be retired from use and discarded at or before 10 years from the date of manufacture, if no damage has been sustained in the meantime.

Use of this equipment

If you use Ferno equipment, you are responsible for learning and utilising safe techniques. We disclaim all liability for any injury or loss arising from the use of this equipment. It is the user’s responsibility for maintaining this equipment in correct working condition. The products in this catalogue are designed for specific purposes and must not be used in any manner other than for which they are designed. Do not use any equipment in this catalogue until you receive proper training in the use of that equipment.

INDEX

2 3

HARNESSES - FULL BODY

Quick connect buckles


Integrated Chest Ascender

The Ferno Hardpoint provides all the comfort and benefits of the standard Centrepoint 2 range however the Ferno Hardpoint replaces the front web belay loop with a hard connection point. For even greater versatility there are an abundance of hard and soft connection points spaced across the waist and back pads to attach additional hardware and gear.

The Ferno Hardpoint Ascender is supplied with most of the features and comforts from the Centrepoint 2 range along with all the benefits found on the standard Hardpoint Full Body Harness. The Hardpoint Ascender also features an integrated chest ascender that provides increased mobility when ascending.

Ferno Hardpoint Ascender Full Body Harness Code VHI HP ASC

Ferno Hardpoint Full Body Harness Code VHI HP

Features

• Fronthardconnectionpoint• Versatiledesignallowsuseforamultitudeofapplications• Offset(cranked)polestrapattachmentpoints• Quickconnectbucklesonwaistandlegs• FrontandrearfreefallarrestD-ringattachmentpoints• Limitedfreefallarrestattachmentpoint• 8additionalconectionpointsforhardwareandgear• Extrawide,paddedwaistandlegstrapsforaddedcomfortwhenhanging

or working for long periods of time• Removablemoisturewicking3Dmeshbackpadprovidesunrivalledshoulder

and neck protection• Fullyadjustablerearlegriserstoensurebestfit• AustralianStandardsapprovedAS/NZS1891.1:2007• AvailableXS,S-M,M-L,XL.ConditionsapplyforXSandXL

Features (additional)

• Integratedchestascenderforincreasedmobilitywhenascending• Optionalchestharnessandbackpadavailabletoensurechestascender

remains close to the body during operation

Work Positioning Fall Arrest Confined Space Rescue Rope Access

• • • •


• • • •

Ferno Chest Strap Set Code VAI AHCS

Specifically designed for rope access workers utilising the Hardpoint and Centrepoint Harnesses. The Ferno Chest Strap Set prevents the harness front straps and associated hardware pulling away from the chest and body when attached to and hanging from this point. The strap is pre-attached to a back pad, just remove the existing pack pad and replace with this set. The webbing straps can be tightened either over the front chest strap or fed through the front D-ring for extra stabilisation. There are side attachment straps to secure the entire set in place

2 3




Integrated Chest Ascender

The Ferno Centrepoint 2 Full Body Harness is a versatile and comfortable harness that can be used for a multitude of rescue applications.

Optional Features• Batteryandselfrescuerattachmentstrap

The Ferno Centrepoint 2 Ascender Full Body Harness is based on our industry renowned Centrepoint 2. As well as being our most versatile and comfortable rescue harness it also features an integrated chest ascender that provides increased mobility when ascending.

Ferno Centrepoint 2 Ascender Full Body Harness Code VHI CEN FB 2 A

Ferno Centrepoint 2 Full Body Harness Code VHI CEN FB 2

Features

• Versatiledesignallowsuseforamultitudeofapplications• Offset(cranked)polestrapattachmentpoints• Confinedspaceretrievalattachmentpoints• Quickconnectbucklesonwaistandlegs• FrontandrearfreefallarrestD-ringattachmentpoints• Limitedfreefallarrestattachmentpoint• Gearloopsforstoringexcesshardwareandgear• Extrawide,paddedwaistandlegstrapsforaddedcomfortwhenhanging

or working for long periods of time• Removablemoisturewicking3Dmeshbackpadprovidesunrivalledshoulder

and neck protection• Fullyadjustablerearlegriserstoensurebestfit• AustralianStandardsapprovedAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXL

Features (additional)

• Integratedchestascenderforincreasedmobilitywhenascending• Optionalchestharnessandbackpadavailabletoensurechestascender

remains close to the body during operation


• • • • •


• • • • •

Ferno Hardpoint Full Body Harness Code VHI HP

4 5

Ferno Centrepoint Full Body Harness Code VHI CEN FB (basic), VHI CEN FB CS (con space), VHI CEN FB CS BS (batt strap)

Features

• Polestrapattachmentpoints• FrontandrearfreefallarrestD-ringattachmentpoint• Limitedfreefallarrestattachmentpoint• Rearfreefallarrestattachmentpoint• Extrawide,padded,waistandlegstrapsforaddedcomfortwhen

hanging or working for long periods of time• Gearloopsaroundthewaistforstoringexcesshardwareandgear• Fixed,elasticisedlegrisers• AustralianStandardsapprovedAS/NZS1891.1:2007• Versatiledesignallowsuseforamultitudeofapplications• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXLOptional Features• Confinedspaceretrievalattachmentpoints• Batteryandselfrescuerattachmentstrap

Features

• Frontfreefallarrestattachmentpoints• RearfreefallarrestD-ringattachmentpoint• Breathablerearmeshpanelkeepstheharnessinshapeready

for easy donning • Multipurpose,generalfallarrestharness• Forgedsteelslidingbucklesforwaist,chestandlegadjustments

providing correct and secure fit• AustralianStandardsapprovedAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXL• Labelling/screenprintedmeshavailable-conditionsapplyOptional Features• Polestrapattachmentpoints• Confinedspaceretrievalattachmentpoints• Waistbelt• Dorsalextension

Features

• Lightweight design 1.66 kg, all alloy hardware• Rear free fall arrest D-ring attachment point• Quick connect buckles on legs• Elasticised waist strap ensures comfortable fit• Attachment points above the waistline to prevent inverting• Simplistic design and shape allows easy donning• Australian Standards approved AS/NZS 1891.1:2007• Availableinonesizefitsmost.ConditionsapplyforXSandXL

Ferno Tradesman Full Body Harness Code VHI TRADE B (Basic), VHI TRADE CSW (with optional accessories)


• • • •


• •

The Vertical Challenge Full Body Harness was purpose designed forthe changing regulations and safety requirements being implementedinto the Australian outdoor and recreation industry. It’s simple andflexible design allows fitting to a variety of shapes and heights.The Vertical Challenge Full Body uses all alloy hardware and quick connect buckles and weighs in at a very lightweight 1.66 kg.



• • • • •

Vertical Challenge Full Body Code VHS CHALLENGE FB


4 5


• • • • •

Ferno Tower 3 Full Body Harness Code VHI TOW 3

Features

• Comfortable,paddedandstableseatandlumbarsupport• Reardorsalfreefallarrestextensionstrap• Frontfreefallarrestattachmentpoints• Confinedspaceretrievalattachmentpoints• Reflective,photoluminescentrearpad• Quickconnectadjustablelegbuckles• Reargearloops• Stainlesssteelcomponentry• Large,easyaccess,polestrapattachmentpointssetlowtoprovide

a balanced and comfortable position• Neoprenecoversaresuppliedonalluppermetalbucklesforelectricalsafety• Themostcomfortableandstableharnessavailableforsuspendedtowerwork• AustralianStandardsapprovedAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXL


• • • •

Ferno Tower 2 Full Body Harnesss Code VHI TOW 2

Features

• Wide,comfortable,paddedseatandlumbarsupport• Large, easy access, pole strap attachment points placed

low to provide a balanced, comfortable position• Non-metallicreardorsalfreefallarrestextensionstrap• Frontfreefallarrestattachmentpoints• Neoprenecoversaresuppliedonalluppermetalbuckles

for electrical safety• AustralianStandardsapprovedAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXL



6

HARNESSES

7

HARNESSES

1

2

3

1

2

3

Hi-Safe FH17 Full Body Harness Code HS-FH17


• • •

12

3

Hi-Safe FH60 Full Body Harness Code HS-FH60, HS-FH60-L (with lanyard),


• • •

Picture Identifier/Features

1 Front free fall arrest attachment point2 Rear free fall arrest D-ring attachment point3 Breathable rear mesh panel keeps the harness in shape• Colourcodedwebbingforeasierdonning• Quickandeasytodonandadjust• Fullyadjustable,multisizefit• AustralianStandardsapprovedAS/NZS1891.1:2007• Optionalpermanentlyattachedlanyardalsoavailable• Customisedlabellingavailable-conditionsapply



• • •

1

2

3 3

4

Hi-Safe FH50 Full Body HarnessCode HS-FH50, HS-FH50-L (with lanyard),


1 Front free fall arrest attachment point2 Rear free fall arrest D-ring attachment point3 Confinedspaceretrievalattachmentpoints4 Breathable rear mesh panel keeps the harness in shape• Colourcodedwebbingforeasierdonning• Quickandeasytodonandadjust• Fullyadjustable,multisizefit• AustralianStandardsapprovedAS/NZS1891.1:2007• Optionalpermanentlyattachedlanyardalsoavailable• Customisedlabellingavailable-conditionsapply


1 Front free fall arrest attachment points2 Rear free fall arrest D-ring attachment point3 Threadthrough,adjustablelegstraps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply


1 FrontfreefallarrestloopswithD-ring2 Rear free fall arrest D-ring attachment point3 Threadthrough,adjustablelegstraps• Fullyadjustable,multisizefit• Easytodonoverthehead/jumperdesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply


• • • •


6

HARNESSES

7

HARNESSES

1

2

3 3

4

1

2

34

5

3

1

1 1

2

23 3

44 4

5 5 5

6

6

6

77

7

7



• • •

Hi-Safe FH17-70 Full Body Harness Code HS-FH17-70

Hi-Safe FH17-40 Full Body Harness Code HS-FH17-40


• • • •

Hi-Safe FH 6 Point Full Body Harness Code HS-FH 6POINT

Hi-Safe FH17-90 Tower Harness Code HS-FH 17-90


• • • •


• • • •


1 Front free fall arrest loops 2 Rear free fall arrest D-ring attachment point3 Sidepolestrapattachmentpoints4 Threadthrough,adjustablelegstraps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply


1 Frontwaistlimitedfreefallarrestloops2 Front chest free fall arrest loops 3 Rear free fall arrest D-ring attachment point4 Rearfreefallarrestextensionstrapwithwristloop5 Sidepolestrapattachmentpoints6 Confinedspaceretrievalattachmentpoints7 Threadthrough,adjustablelegstraps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007


1 Front free fall arrest loops2 Rear free fall arrest D-ring attachment point3 Reardorsalfreefallarrestextensionstrap4 Confinedspaceretrievalattachmentpoints5 SidepolestrapO-ringandD-ringattachmentpoints6 Paddedkidneybeltandbuttockstrap7 Threadthrough,adjustablelegstraps•Easytodonjacketstyledesign• Customisedlabellingavailable-conditionsapply• AustralianStandardsapprovedAS/NZS1891.1:2007

4



1 Front free fall arrest loops2 Rear free fall arrest D-ring attachment point3 Reardorsalfreefallarrestextensionstrapwithwristloop

4 Confinedspaceretrievalattachmentpoints5 Threadthrough,adjustablelegstraps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply

8 9

1

1

2

3

4

Ferno Centrepoint Sit HarnessCode VHI CEN SIT (basic), VHI CEN SIT BS (with optional accessories)

Ferno Centrepoint Sit Miner HarnessCodeVHIMCENSIT(steel),VHIMCENSITSS(stainlesssteel)

Bosun’s Chair Code HS BC20

The Bosun’s Chair is ideal for situations where a worker will be suspended for extended periods of time, such as silo cleaning, panel painting and building inspections.

The Bosun’s Chair should be used in conjunction with a complete fall arrest or fall restraint system.

Features • Large seat area with

back support • Adjustable waist and

leg straps • Adjustable foot rest to

avoid leg cramps • External storage pouch

and tool gear loops


1 Pole strap attachment points2 Wide,padded,waistandlegloopsforaddedcomfort

whenhangingorworkingforlongperiodsoftime3 Gearloopsaroundthewaistforstoringhardwareandgear4 Fullyadjustablerearlegriserstoensurebestfit• Versatiledesignallowsuseforamultitudeofapplications• Userfriendlyandlightweightdesign• AustralianStandardsapprovedtoAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXLOptional Features• Batteryandselfrescuerattachmentstrap• Flame-proof/anti-staticwebbing

2

Features

TheCentrepointSitMinerHarnessisasimplifiedandlighterversionoftheCentrepointSitHarnesswithreducedwaistpaddingandnon-padded,slim-linelegstraps.Tolightentheharnessfurther,nonessentialcomponentssuchassideDringsandgearloopshavebeenremoved.TheCentrepointSitMinerHarnessisavailablewithstandardsteelquickconnectbucklesoroptionalstainlesssteelquickconnectbuckles.

•Lightweightandeasytodon•AustralianStandardsapprovedtoAS/NZS1891.1:2007• AvailableXS,S-M,M-L,XL.ConditionsapplyforXSandXL

HARNESSES - SIT

8 9

HARNESS FITTING

Step 4

Tighten a strapFeed the webbing through the buckle and secure by moving the keeper.

Loosen a strapMovethekeeperupthestrap,andreposition the buckle for more room.

Shoulder strapsTilt the keeper and whilst holding onto the top piece of webbing underneath the keeper, move the keeper up the webbing.

Waist strapsFor harnesses with waist straps, pass the excess webbing through the keeper to secure.

Leg strapsThe slide keepers on the leg straps should be positioned to the front. Makesurethelegstrapsarenottwisted.

Step 1

Step 5 Strap Adjustment

Step 2 Step 3

Remove harness from packaging. Hold harness in front of you by rear dorsal free fall arrest D-ring as shown. Gently shake harness to ensure all straps are not twisted or tangled.

Put harness over each shoulder similar to putting on a coat. The rear dorsal free fall arrest D-ring should now be between your shoulder blades.

Fasten chest strap and waist strap (if fitted) with buckle, ensuring each buckle plate lays flat on each other.

Bend your knees and position yourself as shown. Reach between your legs and connect right strap to right leg buckle ensuring the buckle plates fasten through each other.

Repeat this procedure for your left leg. It is important the straps between your legs are not twisted or crossed.

When finished steps 1 to 4 ensure your harness is secured correctly including the black strap which is positioned under the buttocks (as shown above).

The finished fitting should feel snug but not restrict your movement in any way.

10 11

HARNESS ACCESSORIES

Harness Assist

TheHarnessAssistisspecificallydesignedtominimisetheeffectsof suspension trauma. In the event of a fall an adjustable twin foot loop is deployed allowing the user to stand and transfer their weight directly to the anchor point greatly relieving pressure from the harness – one of the major contributing factors to suspension trauma symptoms. The Harness Assist is available in varying options allowing versatility for various users and scenarios. All options are lightweight at approximately 150 g.

Option 1 Harness Upgrade Code “HS-HA”

This option can be retrofitted to any harness and is manually deployed after a fall. It attaches to the rear free fall arrest attachment point of any existing harness and can be purchased separately and retrofitted in the field. It is neatly packaged and concealed within a small, unobtrusive pack which is fitted to the harness close to the user’s chest ready for quick deployment.

Option 2 Harness Integrated Code “HS-FHHA”

This option is integrated into the harness during production and is generally made to order. It is manually deployed ensuring immediate access to the adjustable foot loops. It is supplied in a neat, unobtrusive pack which is fitted to the harness close to the user’s chest ready for quick deployment. (Only available on Hi-Safe Harness range page 6 & 7).

Option 3 Lanyard Integrated Code “HS-LYHA”

A great addition to any lanyard with the secure knowledge that an automatic deployment occurs in the event of a fall. This version of the harness assist is integrated into the lanyard and is generally made to order with many of the lanyard options shown. It is very slim line, light weight and conveniently packaged within the energy absorbing pouch of the lanyard. (NotavailableonAdjustableMulti-PurposeLanyards).

Option 2

Option 3

Option 1

Ferno Tool Frog Set Code VAI FROGS

The Ferno Tool Frog Set has a universal design to allow an array of rope access or building tools to be carried on your harness. They attach to any standard harness waist belt and securely attach via oversized hook and loop web. The design incorporates a large back pad that prevents tools clashing with the harness or user. The Ferno Tool Frog Set comes supplied as a pair.

10 11

HARNESS ACCESSORIES

Tool Wrist Loops Code HS-WL10, HS-WL15

The Tool Wrist Loops reduce the risk of dropped tools and equipment. They are lightweight, flexible and comfortable to wear and have been developed to secure hand tools and other equipment in situations where work must be carried out over other workers or public spaces. Approximately 300 mm in length to end of string once attached to wrist.

• Cordloop• Adjustablewristband• Washable

• Metalsnapclip• Swivelhook• Adjustablewristband

HS-WL10 HS-WL15

Safe Spring Hook Code EB-STL

The Safe Spring Coil prevents tools accidentally falling when working at height. Coiled, plastic coated stainless wire extends from 430 mm to 1600 mm. Supplied with various fitting attachments for varying tools configurations. 5 kg load weight. Minimumorderquantityof12.

12 13

Absorber Lanyards

Lanyards are designed to be the flexible link between a harness and attachment point providing you with the maximum safety

possible.Fernoabsorberlanyardsaredesignedtolimittheforceorshockloadsustainedintheeventofafallto6kN.Fernooffer

a full range of Australian Standards approved energy absorbing lanyards that provide a solution to any height safety scenarios.

Lanyardhardwarecanbesteeloralloywithdoubleactionhooks,scaffoldhooks,screwgateortriplockkarabiners.

HS-LYS100 steel

HS-LYA100 alloy

HS-LYaTT110EL alloyHS-LYSTT110EL steel

Hardware Options

Steel Screw gate Karabiner

(VCT A428TOZO)

Steel Small Triplock

Karabiner (VCT A430TVZO)

Alloy Triplock

Karabiner (VCT 4300001)

Alloy Double Action Hook (VCT L3702101)

Steel Large Triplock

Karabiner (VCT 595TBZO)

Steel Double Action Hook

(VPEN 9652)

SteelScaffoldHook

(VUSA S-2230)

AlloyScaffoldHook

(VCT L3536201)

Alloy Screw gate Karabiner

(VCT L4280001)

LANYARDS

HS-LYS210EL steelHS-LYA210EL alloy

HS-LYSTT120 steelHS-LYATT120 alloy

12 13

Adjustable Multi-Purpose Lanyard Code VAI ADJ EA FAL

Lanyard Mate Code HS-LYS ADJ

Rope Absorber Lanyard Code HS-LY20 SP (spliced rope) HS-LY20 SK (sewn kernmantle)

LANYARDS

TheAdjustableMulti-PurposeLanyardisasingleassemblyandissuppliedwith an adjustable rope adjuster. It is simple to inspect, maintain and use and ideal for use in a variety of situations including elevated work platforms and all general work at height scenarios. The durable rope construction in conjunction with a rope grab allows the user to adjust the lanyard length from 60 cm to 200 cm ensuring the perfect length lanyard for each working scenario.ForexceptionalworkpurposestheAdjustableMulti-PurposeLanyard can be supplied in custom lengths exceeding two metres. Australian Standards approved to AS/NZS 1891.1:2007.

TheLanyardMateisanAS/NZS1891.1:2007approvedenergyabsorbing lanyard that is self adjustable from 70 cm to 2 m providing flexible and safe access to the users workplace. It can be supplied with an array of steel or alloy hardware depending on the individuals needs.

A single energy absorbing lanyard with either a 12 mm three strand spliced rope or 11 mm sewn kernmantle rope. These can be supplied with an array of steel or alloy hardware depending on the individuals needs. Australian Standards approved to AS/NZS 1891.1:2007.

Energy Absorber (only)

Code Hardware Selection LengthHS-SA10 Screw Gate Karabiner/Screw Gate Karabiner 60 cm

HS-SA20 D-ring/Screw Gate Karabiner 60 cm

HS-SA30 Double Action Hook/Screw Gate Karabiner 60 cm

HS-SA10

HS-SA20

HS-SA30

In the event of a fall, energy absorbers deploy an additional length of webbing that is designed to absorb the force or shock load experienced.

Wire Absorber Lanyard Code HS-LY80P (karabiner), HS-LY80P-DA (double action hook)

A single plastic coated, galvanised wire rope with an energy absorber. The wire rope is a suitable alternative to webbing when welding or working with cutting tools. Available with screw gate karabiner or double action hook at the energy absorber end. Australian Standards approved to AS/NZS 1891.1:2007.

14 15

Wire Core Pole Strap Code HS-WCPS/3 (3 m) HS-WCPS/4 (4 m)

Adjustable Rope Lanyard 2 m Code HS-LY200CD

Hi-Safe Non Adjustable Lanyards

Code Style Hardware Selection LengthHS-LY600R Rope Lanyard Screw Gate Karabiner/Screw Gate Karabiner 60 cm

HS-LY600W Web Lanyard Double Action Hook/Screw Gate Karabiner 60 cm

HS-LY200R Rope Lanyard Screw Gate Karabiner/Screw Gate Karabiner 2 m

HS-LY200W Web Lanyard Double Action Hook/Screw Gate Karabiner 2 m

A rope positioning system with 2 m of adjustment by means of a stainless steel double jawed rope adjuster. Supplied complete with an attached steel screw gate karabiner to secure to an anchor point of harness.

To be used in situations of restraint where there is no risk of a free fall. Refer to AS NZS 1891.1:2007 or a Registered Training Organisation.

Madeofcutresistantsteelwirewithadoublebraidcoverandsuppliedcompletewith a stainless steel rope adjuster, steel screw gate karabiner and steel double action hook. These lanyards are ideal for use when welding or using cutting tools. Available in 3 m or 4 m lengths.

HS-LY600W

HS-LY600R

HS-LY200R

Hi-Safe Non-Adjustable Lanyards are available in rope or webbing and are used as an extension or to secure workers in restraint only. Energy Absorbers are not available on these products.

To be used in situations of restraint only where there is no risk of a free fall. An understanding of working in restraint is essential for the safe use of these products. Refer to AS NZS 1891.1: 2007 or a Registered Training Organisation.

LANYARDS

Ferno Pole Strap Code VAI POLE EN2 NZ

AS/NZS 1891.1:2007 approved pole strap is available in various lengths from 1.9 m to 5 m depending on the user’s individual circumstances. Each pole strap is supplied standard with two double action alloy hooks. Also available with steel or alloy karabiners (screw gate or triplock). Supplied standard with either a durable leather sleeve or a webbing protective sheath. An optional D-ring can be supplied as an attachment point for hanging tools and gear up to 50 kg.

• AS/NZS 1891.1:2007 standards approved • Available in various lengths from 1.9 m to 5 m • Available in an array of hardware connection points • Buckleadjustmentisoffsetfromattachmentpointforeasyadjustment • Supplied standard with either a durable leather sleeve or a webbing

protective sheathOptional D-ring

14 15

FALL BLOCKS

Fall Arrest Blocks

Fall Blocks

Code Description Weight ExtensionDimensions

LxWxD (mm)SWL Type

VISC-UB033 MerlinFallArrestBlockwithWebbing 1.05 kg 3.3 m 142 x 107 x 60 136 kg 2

VISC-UBO50A Fall Arrest Block with Webbing 2.68 kg 5 m 215 x 146 x 100 136 kg 2

VISC-UB051 Fall Arrest Block with 5 mm Galvanised Wire Rope 2.68 kg 5 m 215 x 146 x 100 136 kg 2

VISC-UB170A Fall Arrest Block with 5 mm Galvanised Wire Rope 8.78 kg 15 m 335 x 215 x 120 136 kg 2

VISC-UB171 Fall Arrest Block with 5 mm Galvanised Wire Rope and Winch 8.89 kg 15 m 335 x 215 x 120 136 kg 3

Fall arrest blocks are designed to arrest a sudden fall but also allows the user a range of movement in all directions providing compliance and safe access to the workplace. Each unit has a speed sensitive double locking action that automatically activates should a fall occur as well as an internal energy absorber to reduce the force of the fall. The full range of ISC fall arrest blocks provide a fall protection solution for working at height in construction, industrial, warehouse, utility, mining and confined space applications.. All fall arrest blocks are made of high strength, powder coated aluminium and meet ANSI Z359(07).1 and CE EN 360 Standards.

VISC-UB033 * VISC-UB170A VISC-UB171VISC-UBO50A VISC-UB051

* VISC-UB033 supplied standard with swivel triplock karabiner, optional hardware available also.

16 17

HARNESSES

1 2 3 4 5

This area represents the calculated work area.

Distance from anchor point divided by 3 gives distance of movement to each side of person.

WORK EDGE

Anchor point

9 m

3 m 3 m

Calculating potential fall distances and clearances – energy absorbing lanyard

Before Fall AnchorageAfter Fall Calculation

Required distance for

energy absorber to decelerate

Worker height

Safety/Residual clearance

Total 6.55 m

1.75 m

1.8 m

1 m

Lanyard length

2 m

Work zone formula - overhead anchors

Roll out

Work zone formula – connecting safety lines

Example 1

Rope must be tight between you and the anchor point.

Protect rope on ridge line from cutting.

Maintainthe30/30 degrees.

Example 2

Use a round sling ortie-offadapter.

Attempt to wrap twice around structure.

Ensure hook and free fall arrest attachment point is compatible.

Attachment hardware is an important consideration. Under AS/NZS 1891.4:2000, Section 4.3.5, an important safety issue of hardware compatibility is raised. Check your hardware and anchor point to ensure the pictures below can not happen to you.

Roof

Rope adjuster

Personal energy

absorberHarness (back)

Safety Line

30º 30º

Work zone = 500 mm from edge

Approved anchor point

or solid structure

Webbing tieoff

Harness (front)

WORK SAFE HINTS KITS

16 17

HARNESSES

Designed by industry professionals and tested in the field to meet the day to day requirements of roof workers. All components have been carefully selected for durability and quality ensuring longevity of service.

Specifically constructed for use on all metal roofs. All components have been selected for durability and quality ensuring longevity of service.

The Tower Workers Kit contains everything necessary for working on top of towers, electrical poles and pylons.

Roofers Kit Code HS-DL16B (with FH17), HS-DL-3T (with FH60)

Metal Workers Roof Kit Code HS-DLMR

Kit Contents QtyHi-Safe FH17 Full Body Harness

or

Hi-Safe FH60 Full Body Harness

1

Rope adjuster with karabiner 1

15 m of 11 mm kernmantle rope with sewn double action hook

1

Personal energy absorber 1

2mtie-offadapter 1

All purpose grab bag 1

Kit Contents QtyHi-Safe FH17 Full Body Harness 1

Rope adjuster with karabiner 1

15 m rope with double action hook 1

Personal energy absorber 1

2mtie-offadapter 1

Ferno ROOFlok™ Temporary Anchor 1


Tower Workers Kit Code VKIT TOWER

Kit Contents QtyFerno Tower 2 Full Body Harness 1

Sling - round 25 mm x 1500 mm 1

Sling - round 25 mm x 1200 mm 1

Pole strap 4 m 1

Single elasticised absorber lanyard 1.6 m 1

Steel triplock karabiner 2


KITS

18 19

The Pole Top Rescue Kit is supplied complete with all equipment necessary to complete rescues during electrical pole work. Conforms to many electrical authorities requirements. Note: electrical gauntlets not provided.

The Tower Rescue Kit contains the essential equipment required for the retrieval and rescue of personnel on tower structures.

The EPV Exodus Kit is a self-contained escape kit that is ideal for workers on overhead cranes, elevated platforms and rescue teams. Attached to a permanent fixture the unit is deployed in the event of an emergency and operators descend using a simple pre-rigged control descentdevice.Mountingplatekitavailableseparately.

Pole Top Rescue Kit Code VKIT POLE AS

Kit Contents Qty

Weather proof fiberglass container with instructions

1

33 m blue rope with hard eye end 1

Alloy double action hooks 2

Pole Belt 1

Pole strap with D-ring 1

Tool pouch 1

Cable cutters 1

Knife, blunt nose 1

Ferno Tower Rescue Kit Code VKIT-FTRK

Kit Contents QtyStorage backpack yellow 1

65 m rope with sewn eye & triplock karabiner

1

FDU100 Rescue Descender with triplock karabiner

1

50 mm x 1200 mm anchor sling 1

25 mm x 1200 mm round sling 1

Rescue knife with extender and 2 alloy triplock karabiner

1

Mechanicaladvantageretrievalsystem 1

Cervical collar (optional) 1

Kit Contents Qty11 mm rope as required*

2 tonne shackle 1

Exodus escape device 1

Steel screw gate karabiner 1

Fibreglass weather resistant case 1

EPV Exodus Kit Code HS-RE20/16 (16 m rope), HS-RE20/25 (25 m rope)

KITS

18 19

HARDWARE - DESCENDERS

Ferno FDU Code FWE-FDU 100 (with friction rack) FWE-FDU 200 (without friction rack)

Sarab Descender Code VISC RP810E

Length Width Depth Weight200 mm 79 mm 35 mm 440 g

Length Width Depth WeightFDU100 250 mm 135 mm 45 mm 950 gFDU200 250 mm 135 mm 45 mm 730 g

The new Ferno FDU is designed for personal rescue, emergency escape, rescue operations or specialised rope work. It is a friction control, double stop, descending system, with a simple and soft moulded, operator handle. The system starts releasing its load when the handle is moved towards the central position. Should a panic grab take place and the handle is pulled past the central position, the system locks up into the double stop mode.

This mode will only be maintained with the force exerted by the operator, until a gentle release takes place. If the handle is let go, the system automatically locks. For rescue loads (2 persons) the Ferno FDU is available with an additional friction rack. The Ferno FDU has been extensively tested with Donaghys 11 mm Rescue ResponseStaticRopeandDonaghys11mmResponseXTRopeandwhenusedwith either of these ropes will conform to AS/NZS 4488.1:1997.

The Sarab Descender is specifically designed for technical rope access and intervention purposes. It is ideal for use by height access technicians, special forces, rescue specialists and also for arborists and tower workers who are exiting via a long rope descent.

The Sarab Descender has a multi-use rope adjustment device that takes the load of two people and also features double stop capabilities. In technical rope access situations it must always be used in conjunction with a type A device or an EN353-2 backup device and safety line. Suitable for 10.5 to 11.5 mm rope.

Dimensions taken with handle in stored position

FDU100

FDU200

20 21

Rope Length Width Depth Weight11 mm - 12 mm 160 mm 79 mm 29 mm 450 g*

Exodus Escape Device Code HS-RE20

Anthron Lory Code ANTH-LORY

Rope Length Width Depth Weight9 mm - 11.4 mm 125 mm 70 mm 35 mm 365 g

Anthron Doublestop Descender Code ANTH-DSD-30

Rope Length Width Depth Weight11 mm 190 mm 76 mm 25 mm 340 g

Length Width Depth Weight Break LoadAlloy 172 mm 172 mm 13 mm 250 g 40 kN

Stainless Steel 172 mm 160 mm 11 mm 543 g 40 kN

Rescue Figure 8 Code VCT L6170001 (Alloy) , VCT I61700PO (Stainless Steel)

HARDWARE - DESCENDERS

Forming the heart of the EPV Exodus kit this incredibly simple unit can be used for descent and belaying. Constructed from premium quality aircraft grade aluminium and tested in excess of 15 kN. Supplied with steel screw gate karabiner.

*weight without karabiner

The Anthron Lory is a self locking belay device that is also suitable for descending, ascending and mechanical advantage hauling systems. Unlike other units the Anthron Lory automatically locks, both when the handle is released or pulled too far reducing the risk of panic pull.

The Anthron Doublestop Descender is a robust and functional descender with great breaking power and two jamming positions for descending and rescue operations. Too much or too little handle pressure activates the descender’s jamming position. Placing the handle in a central position or ‘sweet spot’ enables a smooth, controlled descent.Maximumworkingloadis150kghoweverithasbeenratedbythemanufacturer for 200 kg in a non-shock load rescue situation.

Available in alloy or stainless steel. Our Rescue Figure 8 with ears is ideal for rescue rappelling or lowering heavy loads.

20 21

CT Ascender Simple Code VCT 2D642D0

CT Chest Ascender Code VCT 2D640D0

Rope Length Width Depth Weight8 mm - 13 mm 104 mm 77 mm 36 mm 140 g


CT Handled Ascenders Code VCT 2D639S5 (left) and VCT 2D639D5 (right)


HARDWARE - ASCENDERS

The Climbing Technology Ascender Simple is designed to be fastened to the harness with a karabiner, maillon rapide or rope 8 mm to 13 mm. The design of the ascender ensures smooth and positive ascending as well as good jamming and a patented rope release device.

It is commonly used as a chest ascender but can also be used for other applications. The design of the ascender ensures smooth and positive ascending as well as good jamming and a patented rope release device.

Each of the Climbing Technology Handled Ascenders has a large opening so they can be easily used with gloves. The handles are padded with a textured rubber compound which is comfortable but firm, providing a non-slip grip.

VCT 2D639S5 (left)

VCT 2D639D5 (right)

22 23

HARNESSES

TRAV16-0100 (Large)

TRAV16-0200 (Small)

Traverse 540 Rescue Belay Code TRAV16-0100 (large) and TRAV16-0200 (small)

CMC ProSeries CSR Swivel Pulley

Code Rope Size Weight MBSTRAV16-0200 (Small) 10.6 mm - 11.5 mm 624 g 40 kN

TRAV16-0100 (Large) 11.5 mm - 13 mm 624 g 40 kN

Code Sheave Diameter Sheave Width MBS WeightCMC300345 38 mm 11 mm 36 kN 513 g

CMC300344 38 mm 11 mm 36 kN 408 g

CMC300337 70 mm 13 mm 53.3 kN 1.4 kg

CMC300336 70 mm 13 mm 52.5 kN 1 kg

HARDWARE - BELAYS & PULLEYS

The Traverse 540 Rescue Belay is developed specifically to meet the needs of rescue system belays. It is a self-locking device that is able to hold falling loads quickly while limiting the peak force. This well engineered device is easy to rig and the systematic design reduces the risk of improper loading. A built-in release lever reduces the tension on the belay rope, eliminating the need for a release hitch. For use with kernmantle rescue rope. The BCCTR Belay Compliance Drop Test specifications require a 1 m drop of a 280 kg load onto 3 m of 12.7 mm kernmantle rescue rope, with less than 1 m of additional travel and less than 15 kN peak force.

TheCMCProSeriesCSRSwivelPulleyisaprofessionaltoolforconfinedspaceandother rescue applications. It has a proprietary locking system and can be unlocked while under load. By eliminating the cam, the pulley system is much more compact when fully collapsed.

The integral swivel reduces torque by aligning the pulley with the load. The built-in swivel is compact and eliminates the need for multiple connections to incorporate a separate swivel. The forged steel eye, high strength aluminium side plates, sealed ball bearings, and anodised aluminium sheaves all combine to provide exceptional strength.

Developedandrefinedduringfouryearsofresearch&testing,theCMCRescueMPDisthenextmajoradvanceintechnicalhardwareforprofessionalroperescuers. TheMPDisamulti-purposedevicethatperformsallfunctionsformainlines, belay/safetylines,taglinesandhoistinglines.TheMPDcanalsobeusedtotensionhighlinesandguidinglines.Trainingandon-scene rigging can be greatly simplified by having a single device. Rescue system changeover from a lowering system to a raising system becomes faster and safer by eliminating the need to switch out and replace hardware.

• Variable-friction descent control device for rescue systems and rappels • High efficiency pulley with an integral rope-locking mechanism for a haul system • Rescue belay device • MeetsBCCTRRescueBelayCompetencyCriteria • Becket allows rigging cleaner and more efficient pulley systems • For use with 1/2 in. (13mm*) rope • Allows the main line and belay line rigging to be mirror images • Functions as lowering brake and as ratcheting pulley for raising • Rapid conversion to a retrieval line makes it ideal for confined space operations

*Designed for use with 12.5 mm-13 mm rope. Rope used for certification rounded up to 13 mm per NFPA 1983.

CMC Rescue MPD Code CMC333000

UL Classified to NFPA 1983 - General Use Pulley - Auxiliary - Descent Control

22 23

HARNESSES

CMC Rescue S/S Swivel Pulleys

OG1 Prusik Minding Pulley

The rotating swivel aligns the rope with the direction of pull making these swivel pulleys ideal for high anchor points or tripods and the overall length is minimised by combining the swivel with the pulley. The stainless steel sheave on the single pulley permits use with either rescue rope or wire cable. The proprietary pivoting side plate can open without having to disconnect the pulley from the anchor, allowing rope to be quickly inserted or removed. Use the swivel double pulley when you need two ropes to run together. A double detent button prevents accidental opening. Sheave size 51 mm x 13 mm.

TheOG1PrusikMindingPulleyhasanimpressive36kNloadrating,howeveritsdistinctive feature is the combination of a side opening plate with a uniquestainless steel gate that allows you to access the sheave without having todisconnect the pulley from its anchor or karabiner. The OG1 Pulley canaccommodate up to three 12 mm karabiners at its connection point.Researched and developed by our team in Australia, the Versa-OG1 Pulley is aninvaluableaidforanyheavydutyindustrialriggingorrescueoperations.Madefrom high grade anodized aluminium and stainless steel. Sheave size: 51 mm x 13 mm..

Code Sheave Diameter Sheave Width MBS WeightCMC300431 Single Stainless Steel Light Use 32.7 kN 320 g

CMC300430 Single Stainless Steel General Use 39.4 kN 320 g

CMC300432 Double Aluminium General Use 43.5 kN 414 g


HARDWARE - PULLEYS

24 25

HARDWARE - PULLEYS

ISC Prusik Minding Pulleys ISCPrusikMindingPulleysaredesignedforheavydutyrescue,riggingandhaulingsystems.Thefullrangeconsistsofsizessmall,medium and large. Each size is available in a single or double pulley configuration in aluminium or stainless steel.

Other features include: • Riveted, tamper proof axles that are not able to unscrew during use • Fixed wheel shear-reduction option available • Laser marked with kN ratings, individual serial numbers and other obligatory details • Fully load rated beckets • Becket eyes allow a karabiner to fully rotate • CE, EN12278 and NFPA (1983) • Optional sealed roller bearings with silicone impregnation for improved wear resistance and reduced friction.

Alloy Plate with Alloy Wheel

Code Description MBS Rope Sheave Weight

VISC RP060A1 Small Single 40 kN 13 mm 50 mm 200 g

VISC RP061A1 Small Double 40 kN 13 mm 50 mm 340 g

VISC RP063A1 MediumSingle 50 kN 13 mm 62 mm 280 g

VISC RP064A1 MediumDouble 50 kN 13 mm 62 mm 500 g

VISC RP066A1 Large Single 70 kN 16 mm 75 mm 440 g

VISC RP067A1 Large Double 70 kN 16 mm 75 mm 760 g

Code Description MBS Rope Sheave Weight

VISC RP060D1 Small Single 40 kN 13 mm 50 mm 398 g

VISC RP061D1 Small Double 40 kN 13 mm 50 mm 674 g

VISC RP063D1 MediumSingle 50 kN 13 mm 62 mm 584 g

VISC RP064D1 MediumDouble 50 kN 13 mm 62 mm 1036 g

VISC RP066D1 Large Single 70 kN 16 mm 75 mm 896 g

VISC RP067D1 Large Double 70 kN 16 mm 75 mm 1626 g

Stainless SteelAlloy

Stainless Steel with Stainless Steel Wheel

24 25

Forged Alloy Swivel Code VCT L7950003

CT Mobile Pulley Code VCT L6220003

CT Twin Pulley Code VCT 2P62600

Rope Length Width Depth Weight Break Load<13 mm 74 mm 44 mm 33 mm 94 g 22 kN


CT Mobile Single Pulley Code VCT 2P62400



Length Width Depth Weight Break Load113 mm 57 mm 30 mm 170 g 40 kN

CT Mobile Double Pulley Code VCT 2P62500

This lightweight Forged Alloy Swivel with precision bearings helps in the prevention of severe rope twist. Each eyelet will fit three connectors up to 12 mm diameter. Ideally used in tripod rescue scenarios or hauling systems.

HARDWARE - PULLEYS

A light alloy pulley with oscillating side plates. The sheave is mounted on self lubricating bushings. Rope 13mm.

Light alloy double pulley with oscillating side plates. Twin sheaves mounted on heavy duty ball bearings. Up to three connectors can be hooked in to the large eyelet plus one connector in the smaller eyelet.

Large light weight alloy pulley with oscillating side plates. Twin sheaves mounted on heavy duty ball bearings. Up to three connectors can be hooked in to the large eyelet.

Large light weight alloy pulley with oscillating side plates. Twin sheaves mounted on heavy duty ball bearings. Up to three connectors can be hooked in to the large eyelet plus one connector in the smaller eyelet.

26 27

SKR Anti Fall Device 11 mm Code VCT I70711PO

SKC for 8 mm Wire Cable Code VCT I70608PO

ISC Rope Grab with Pip Pin Code VISC RP209A

Rope Tensioner Code VFJ54HR

CD10 Rope Adjuster Code HS-CD10

Fuji Denko Rope Grab Code VFJ 12D-7/R

Anchor Plates Code VCT L6370303 (4 holes) and VCT L6370503 (8 holes)

Length Width Weight Breaking Load Hole Diameter4 Holes 96.5 mm 83 mm 63 g 36 kN 20 mm

8 Holes 149 mm 98 mm 136 g 45 kN 20 mm

HARDWARE - ROPE ADJUSTERS & PLATES

A 285 g stainless steel fall stop device for 11 mm static rope.

A stainless steel fall stop device suitable for 8 mm stainless steel cable.

The ISC Rope Grab with Pip Pin is a high quality, lightweight rope grab that can be fitted to the rope at any point. The axle is fitted or detached by pushing on the thumb button to release the locking bearings.

The ISC Rope Grab with Pip Pin is made from high quality, machined 6082 aluminium and is hard anodised. Suitable for use on 11 mm to 13 mm diameter semi-static ropes. The ISC Rope Grab with Pip Pin is EN353-2 rated.

For use with 16 mm rope. Ideal for use in temporary high lines. Can be tightened to a force of 2 kN.

A low cost alternative to other rope grabs. For use with three strand polyester or double braid 12 mm rope.

• Comes with steel karabiner • Suits 12 mm synthetic safety rope • Fully openable • Double lock system • Device follows you up/down rope

Anchor Plates allow you to create and organise your anchor systems safely. These Anchor Plates are made from high grade aluminium alloy and are available in four or eight hole options.

Stop and Go Code VCT I70812PO

An openable Stop and Go fall device equipped with an anti-panic release lever. Suitable for 12 mm rope and certified for use with Donaghys 11 mm Response Static and ResponseXTLines.EN353-2Rated.

Dimensions: L 120 mm, W 95 mm, D 38 mm. Weight 480 g.

26 27

Maillon Rapide Delta

Maillon Rapide C

Maillon Rapide Pear

Maillon Rapide Twist

Maillon Rapide Standard

Maillon Rapide Large Opening

Code Size mm

Length mm

Gate Opening

mm

Thread Diameter

mmWork Load

kg

Standard - Zinc Plated SteelVMRSTS04 4 39.5 5.5 6 180

VMRSTS06 6 57 7.5 9 400

VMRSTS08 8 74 11 11 700

VMRSTS10 10 89 12 13 1100

VMRSTS12 12 104.5 15 15 1500

Standard - Stainless SteelVMRSTSS08 8 74 11 11 1100

VMRSTSS10 10 89 12 13 1800

VMRSTSS12 12 104.5 15 15 2500

Standard - High Strength AlloyVMRSTA10 10 89 12 13 2500

Code Size mm

Length mm

Gate Opening

mmThread

Diameter mm

Work Load kg

Large Opening – Zinc Plated Steel VMRL0S07 7 79 16 10 500

VMRL0S08 8 88 17.5 11 650

VMRL0S10 10 105.5 20.5 13 1 000

VMRL0S12 12 124 23.5 15 1250

VMRL0S16 16 161 29.5 19 2500

Large Opening – Stainless Steel VMRLOSS08 8 88 17.5 11 980

VMRLOSS10 10 105.5 20.5 13 1600

VMRLOSS12 12 124 23.5 15 2200

Code Size mm

Width mm

Length mm

Gate Opening

mm

Thread Diameter

mmWork Load

kg

Delta - Zinc Plated SteelVMRDS04 4 35.5 40 5.5 6 100

VMRDS06 6 47 56 7.5 9 250

VMRDS08 8 56 73 10 11 550

VMRDS10 10 66 87 12 13 900

VMRDS12 12 75 104 15 15 1100

Delta - Stainless Steel VMRDSS10 10 66 87 12 13 1250

Delta - High Strength AlloyVMRDA10 10 66 87 12 13 350

Code Size mm

Length mm

Gate Opening

mm

Thread Diameter

mmWork Load

kN

C Shape – Zinc Plated Steel VMRCS10 10 86 10 13 10 kN

C Shape - High Strength AlloyVMRCA10 10 86 10 13 10 kN

Code Size mm

Width mm

Length mm

Gate Opening

mm

Thread Diameter

mmWork Load

kg

Pear Shaped – Zinc Plated SteelVMRPS08 8 53 100 17.5 11 480

VMRPS10 10 63 118 20.5 13 720

Code Size mm

Width mm

Length mm

Gate Opening

mm

Thread Diameter

mm

Break Strength

kNTwist Zinc Plated Steel

VMRSTSTW07(Standard) 7 33 66 16 10 27.5

VMRLOSTW08(Large Opening) 8 36 88 17.5 11 32

HARDWARE - MAILLON RAPIDES

Ideal in situations where a three-way load is exerted. Also used for climbing rope, anchors and harness-to-chest harness connectors.

Commonly used when connecting sit and chest harnesses.

Ideal in situations where a three-way load is exerted. Also used for climbing rope, anchors and harness-to-chest harness connectors.

Fittedwitha90degreetwist,theMaillonRapide Twist is ideal for smoother PPE connections in industrial safety, fall arrest systems, work restraint, work positioning, rope access as well as in mountaineering and climbing.

The wider mouth opening makes connecting easier. Suitable for anchor and rigging connections.

TheMaillonRapideStandardisextremelystrong when loaded along the long axis. Suitable for anchor and rigging connections.

28 29

Weight Diameter Bar170 g 10 mm 35 kN

Steel Screw Gate Karabiner Code VAUA TP11A

Steel Screw Gate Karabiner Code VAUA TN 61A

CMC Steel 72 kN Karabiner Code CMC300110 (screw gate) and CMC300120 (triple action)

Steel Triplock Karabiner Code VISC KH202SSP1

Steel Triplock Karabiner Code VCT A595TBBZO

Steel Triplock Karabiner Code VISC KH308SSP1

Steel Screw Gate Karabiner Code VAUA TM11A

Steel Screw Gate Karabiner Code VCT A455TBZ0



Weight Diameter Bar320 g 13 mm 60 kN 15 kN 15 kN


Weight195 g 50 kN 15 kN 15 kN




Weight178 g 50 kN

Steel Triplock Karabiner Code VCT A430TBZO

Steel Screw Gate Karabiner Code VCT A428TOZO

HARDWARE - KARABINERS

The perfect rescue karabiner. Large symmetrical D-shape, steel screwgatewithlargeoffsetgateopening and 60 kN strength.

127

70

40

110

60

20

A compact D-shape, steel screw gate karabiner. Slender design locking eye prevents rope snag when clipping in and out.

TheultimategeneralpurposeCMCsteelrescue karabiner with a 40 mm gate opening and a break strength of 72 kN. Available with screw gate or triple action gate.

125

72

40

Large D-shape steel karabiner with triple action gate opening. This steel karabiner is ideal for rescue and general industrial applications. Optional captive bar provided.

126

78

26

This steel karabiner is made of hardened zinc plated steel for high performance and enhanced safety. It has a triple action twist lock entry with wide opening gate and optional captive bar. New snag free nose and gate.

117

77

26

Our most popular triple action karabiner. It is perfect for secure connections to D-rings and anchors. Used widely in industrial applications. Optional captive bar.

103

53

16 110

70

24Classic D-shape, steel screw gate karabiner. Perfect for most applications including rescue, industrial, caving, group use or setting anchors for climbing.

This high strength, hardened zinc plated steel karabiner has a useful wide opening screw gate entry. New snag free nose and gate. Optional captive bar provided.

117

77

26

A compact, lightweight, hardened steel karabiner with a 50 kN rating and triple lock gate. New snag free nose and gate. Optional captive bar provided.

109

61

19

Classic screw gate karabiner with very high break strength and optional captive bar. Individually tested. New snag free nose and gate.

108

62

21

28 29

Steel Screw Gate Karabiner Code VAUA TX11S

Alloy Screw Gate Karabiner Code VAUA KX11AM

Alloy Triplock Karabiner Code VCT 2C42300

Steel Swivel Triplock Karabiner Code VISC KH260SSI1 (steel), VISC KH251SSI1 (stainless steel)

Steel Triplock Karabiner Code VISC KH307SSP1 (steel), VISC KH307SSP3 (stainless steel)

Alloy Triplock Karabiner Code VCT L5300001


Weight133 g 20 kN 15 kN

Weight

steel 225 gstainless steel 330 g

35 kN 19 kN

Weightsteel 330 g

stainless steel 225 g 40 kN



Weight79 g 30 kN

Wire Connectors CodeVCT I70908PO (80 mm), VCT I70910PO (100 mm), VCT I70914PO (140 mm)

Alloy Triplock Karabiner Code VCT L4131201

HARDWARE - KARABINERS

Large pear shaped steel screw gate karabiner with captive bar and large offsetgateopening.Thelarge,easytouse gate opening is perfect for clipping scaffoldorladdersteps.

120

80

28

111

69.5

23

170

73

18

178

47

47

This is a great alloy rescue karabiner. Features lightweight alloy design, large D-shape with wide gate opening and large, easy to use screw gate barrel.

A lightweight, c-shaped alloy karabiner with triplock gate opening. Ideal for situations where a three way load is exerted.

Available in steel or stainless steel with a fall indicator. Swivel feature eliminates potential twisting of line.

Large steel triplock karabiner with large gate opening. The large gate opening is ideal for attaching to larger anchors. Optional captive bar provided. Available in steel or stainless steel.

110

63.5

18

Extra light, drop forged alloy karabiner with triple action gate opening. Optional captive bar provided.

100

65

Availableinthreedifferentsizestosuit80mm,100mmor140mmscaffoldorpipe.Constructedfromone-piecestainless steel giving it a high overall strength 15 kN.

123

75

29A lightweight, alloy, triple action karabiner with a pear shaped profile that allows a large 29 mm gate opening.

30 31

HARNESSES

Spyda Temporary Anchor Point* Code SAY-AP145.20 (clamp) SAY-AP145.10 (screw fix)The Spyda Temporary Anchor Point provides the user with the option to clip or screw fix to most roof structure and incorporates an energy absorbing swivel eye lanyard attachment point.

• Variable fixing options – clamp on or screw fix• Multipleslattedfixingpointsandpivotarmstosuitanyapplication• Energy absorbing swivel attachment point• Lightweight and relocatable 10 kg• Folds into compact unit with carry bag• All fixings and seals included in package • MeetstherequirementsofAS/NZS1891.4

• Fall arrest rated at 22 kN

Ferno ROOFlok™ Tempory Anchor System*

ROOF ANCHORS & BRACKETS

The Ferno ROOFlok™ is easy to attach to most roofs using the supplied screws and rivets. It is lightweight and compact allowing it to be moved from job to job. • Easy to attach using supplied screws and rivets• Can be moved from job to job• Stainless steel construction for durability and longevity• Lightweight and compact• Rated at 15 kN “Fall Arrest” for single person use • MeetstherequirementsofAS/NZS1891.4

Ferno SURFACElok™* The Ferno SURFACElok™ is a unique and versatile permanent mounted anchor system that incorporates our Ferno ANCHORsafe™ attachment point.• Rated at 15 kN “Fall Arrest” for single person use• Permanent surface mounted anchor• Quick and easy installation process• Supplied with tek screws, rivets and sealing tape • Stainless steel construction for durability and longevity • MeetstherequirementsofAS/NZS1891.4

Ferno PURLINlok™* Code FWE-PL CORR (corrugated) FWE-PL TRIM (trim deck) FWE-PL FLAT (flat)

The Ferno PURLINlok™ Roof Anchor range provide an array of base plates for most roof structures and utilise the Ferno ANCHORsafe™ swivel attachment point providing 360 degree access. • Rated at 15 kN “Fall Arrest” for single person use• Permanently mounted anchor• Quick and easy installation process• Supplied with sealing tape, purlin setting block and string applicator• Stainless steel construction for durability and longevity

• MeetstherequirementsofAS/NZS1891.4

30 31

HARNESSES

Hi-Safe RA45 Anchor Bracket* Code HS-RA45

Hi-Safe RA10 Anchor Bracket* Code HS-RA10 CORR (corrugated) , HS-RA10 TRIM (trim deck), HS-RA10 FLAT (flat )

For tile, slate or metal roof structures with timber purlins and access from the underside.• Access for fitting is from below roof line• Includes two galvinised purlin brace, all thread, hardware

and anchor• MeetstherequirementsofAS/NZS1891.4

The Hi-Safe RA10 Anchor range provide an array of base plates for most roof structures. The anchor attachment point sits high and proud providing good clearance options.• Full stainless steel construction• M12eyebolt120mm• Rated at 22 kN• Easy installation• Supplied with purlin setting block and string applicator

• MeetsAS/NZS1891.4anchoragerequirements

*MustbeusedinconjunctionwithapersonalenergyabsorberandlanyardsystemAnyroofstructuremustbeinspectedbyacompetentpersonanddeemedstrongenoughtoyieldtherequiredforcespriortoapplication. If in doubt please consult an engineer for clarification.

ROOF ANCHORS & BRACKETS

32 33

Hi-Safe Ladder Lock Code HS-LLO (parapet), HS-LLO G (gutter)

Climb Safe Ladder System Code HS-CS

Cable Adjuster for Ladder System Code HS-CS1000

Hi-Safe Ladder Locks are available for either a guttered roofs or parapet building structures. They can be securely fastened and are an ideal alternative to permanent ladder systems. A 1 m handrail provides stability when transitioning from ladder to roof which is the most critical point in portable ladder egress and regress. Complies with relevant Australian Standards and guidelines

This complete system is designed for providing safety when ascending or descending ladders. A worker attaches their body harness to the cable via a cable adjuster with shock absorbing lanyard (HS-CS1000 sold separately). They can then move freely up and down the ladder system with both hands free.

The system is mounted as a permanent fixture with the use of a top mounted bracket with energy absorber and bottom mounted bracket with a cable tension system. The ladder system is also supplied with flexible 8 mm steel cable. The ladder system is supplied ready for installation and is supplied with instructions.

Cable guide to reduce lateral movement (supplied on systems 15 m or longer)

Cable tension systemTop mounted bracket with energy absorber

The HS-CS1000 is the recommended adjuster for the above ladder system. It comes complete with built-in energy absorber, two steel screw gate karabiners and stainless steel cable adjuster. The adjuster can be removed from the cable allowing use on other ladder systems but remains locked when the karabiner is in place. Sold separately to ladder system.

Hi-Safe LS25 Ladder Bracket Parapet Code HS-LS25

Hi-Safe LS25 Ladder Bracket Gutter Code HS-LS25G

The Hi-Safe LS25 Ladder Bracket Parapet provides a simple and secure ladder mount preventing ladders slipping from parapet typestructures.Thedesignalsoallowsladderstobetiedoffforincreased safety and security.

The Hi-Safe LS25 Ladder Bracket Gutter provides a simple and secure ladder mount preventing ladders slipping from most structures with exterior gutters. The gutter version is supplied with adjustable stays that provide flexibility when fittingtovariousroofstyles.Thedesignallowsladderstobetiedoffforincreasedsafety and security.

LADDER SYSTEMS

32 33

Ferno Rescue Personal Lanyard (PAL) Code Vas DAISY ADJ

Ferno Industrial Daisy Chain Code Vai DAISY H/D BLK

WEBBING SOFTGOODS

The Ferno Rescue Personal Lanyard allows a rescuer to quickly connect to a victim and then adjust the strap to the desired length. It works well for positioning the victim for a loweringorrappel-basedpickofforforanassistedrappel.There is an added loop to the end for a more positive grip when pulling to adjust. Depending on how the buckle is loaded,itwillbegintoslipbetween15kNto20kN.Tyingoffthe buckle will increase strength.

The Ferno Industrial Daisy Chain is ideal for positioning the casualty during work operations and is a must for all Rope Access and Rescue Technicians. A total length of 1.1 m with an end to end rating between 15 kN to 20 kN (load angle dependent). Each unit comes with 10 x 60 mm attachment loops and is made from durable 25 mm flat polyester web. Each loop rated to 5 kN.

34 35

Ferno Slings Codes VSL R32kN (25 mm round), VSL S80kN (50 mm heavy-duty flat snake) and VSL S30kN (50 mm flat snake

Girth Hitch Sling Code Vsl G30kN

Tie-Off Adapters Code HS-AC1000, HS-AC2000

Hi-Safe Tie-Off Sling With D-rings Code HS-AC10 (1 m), HS-AC20 (2 m)

WEBBING SOFTGOODS

Every Ferno Sling is made from high grade, abrasion resistant webbing and is available in a variety of colours and lengths.Thedifferentstylesprovidetheuserwiththeoption to wrap the sling in a single, double or triple style or tie end to end making them a versatile and handy adjunct forformingtemporaryanchorpoints.Manufacturedinaccordance to AS/NZS 1891.

25 mm Round Sling

50 mm Flat Snake Sling

50 mm Heavy-duty Flat Snake Sling

TheGirthHitchSlingdifferssignificantlyindesignandperformancefromotheradjustableanchor straps, allowing it to handle a higher load before slipping. The D-ring on one side is larger than the other, so the other end can pass through, allowing the straps to be rigged in a girth hitch. Available in lengths from 30 cm to 2.5 m

Availableinoneand2tonneholdingcapacity.Manufacturedfromverylowstretchmaterial with a soft finish to protect painted surfaces.

Madefromhighgrade,abrasionresistantwebbing.AvailableinsafetyorangewithtwoconvenientD-ringspermanentlyattached.Auniversalslingtie-offandforforming temporary anchor points.

AC1000 1 m AC2000 2 m

Etrier and Aider Four and Five Step Code Vas ETRIER 4 & 5 and Vas AIDER 4 & 5

The Etrier and Aider Four and Five Step are ideal for rescue, rope access and recreational aid climbing. The 25 mm flat polyesterwebbinganddensevinylstiffeningribsremainrigidfor years, ensuring ease of foot placement and superior abrasion resistance.

Aider

Etrier

34 35

EDGE PROTECTION

ISC Edge Roller Code VISC ER100A

Rescuetech Multi-Unit Edge Roller

The ISC Edge Roller protects ropes from damage when working over sharp or abrasive edges. The system is fully modular, consisting of edge roller boxes made from pressed and powder coated aluminium and steel oval maillons which can be easily and quickly linked together to form a chain of whatever length is appropriate for the task. Each box assembly weighs 460 g and consists of one box and two maillons. Each box has a series of rollers which protect ropes in three directions but allow the rope to run smoothly with minimal friction.

A low profile edge protection device featuring an alloy aluminium frame and rollers.TheRescuetechMulti-UnitEdgeRoller may be used as a single unit or paired up with multiple units to provide large area protection. Units link together with the included rapid links or may be tied using flat webbing to provide long range protection.

Code Description Dimensions

RT-611111 Single unit 14.5 cm x 21 cm

RT-611112 Small 2 units 45 cm x 21 cm

RT-611113 Medium3units 67 cm x 21 cm

RT-611114 Medium4units 90 cm x 21 cm

Rope Protectors

Ultra-Pro Edge Protector Code CMC294042 (2 Edge Protector) and CMC294044 (4 Edge Protector)

Ferno provide various styles of rope protectors that prevent rope damage on sharp, abrasive or dirty edges and help prolong the life of your rope and slings. They are available in heavy-duty, flat or in a lighter duty wraparound. Ferno’s Rope Protectors provide ideal protection for your ropes and slings.

The Ultra-Pro Edge Protector conforms to the edge but prevents sharp bends in the rope, reducing friction and wear. Ideal for edge protection during hauling operations. Holes in all four corners allow the Ultra-Pro to betiedoffforsafetyorlinkedtogetherforextendedprotection.

(1)

(3)

(2)

• (1) VAS ROP PROT - Light duty • (2) VAI ROP PROT IND FLAT - Flat • (3) VAI ROP PROT IND WRAP - Wraparound

36 37

Size (Dia) Weight/100 m Break Strength SWL Reel Length12 mm 10.4 kg 4570 kg 760 kg 100 m16 mm 21 kg 5530 kg 920 kg 100 m

Size (Dia) Weight/100 m Break Strength SWL Reel Length

11 mm 9 kg 3475 kg 347 kg 200 m

13 mm 11 kg 4750 kg 475 kg 200 m

Size (Dia) Weight/100 m Break Strength SWL Reel Length

6 mm 3 kg 1100 kg 110 kg 100 m

9 mm 6 kg 2250 kg 225 kg 200 m

11 mm 9 kg 3475 kg 347 kg 200 m

13 mm 11 kg 4750 kg 475 kg 200 m

16 mm 16.5 kg 6900 kg 690 kg 100 m

% of Break Strength 10% 20% 30%Elastic Elongation 12 mm 1.8% 2.6% 3.3%

Elastic Elongation 16 mm 1.8% 2.6% 3.3%

Working Load 80 kg 375 kg 3740 kgElastic Elongation 1.4% 6.1% 25%

Response® XT Access Line

Response® Static Line Access Line

Rhino Rigging/Lowering Line

Three Strand Polyester Rope Rigging/Lowering Line

Size (Dia) Reel Length Standard Breakforce Base Colour Marker Yarn No. Strands12 mm 250 m 2280 kg Natural White Blue 3

16 mm 250 m 4100 kg Natural White Blue 3

ResponseXThasbeendesignedwithyourultimatesafetyin mind, certified to AS/NZS 4142.3, ANSI Z-133 and EN 1981standards.DonaghysResponseXTisthepremiumsafety and rescue line and allows quick access for any emergency.

• Low stretch, high strength • Heat set • Quick access • Excellent knot holding

Response Static Line is characterised as supple for handling, coiling and providing superior feel and control when used with certified hardware in any abseil, belay or static descent application. AS/NZS 4142.3 and EN1891 compliant. Available in various colour options.

Rhino is a 100% polyester double braid. Designed forhighstrengthwithlowstretch,Rhinoofferstheultimate in rigging or lowering lines.

• Low stretch • Easy to splice • Excellent handling and abrasion resistance • UV stable • Designed to run easily through rigging hardware

A spliceable three strand, high tenacity, abrasion resistant polyester. This rope is suitable for a multitude of applications including roofing restraint, general lift and tie down purposes.

• AS4142:3 1993 compliant

Arresta Static Kernmantle Rope is a fully imported, economical rope constructed with a braided polyester outer surrounding a nylon kernmantle core.

Available in 11.5 mm and 13 mm diameter

MeetsAS4142.3andEN1891:1998

Arresta Static Kernmantle Rope

ROPE

36 37

Armour-Prus Prusik Line

Product Size (Dia) Break Strength Reel LengthStandard-Prus 6 mm 1100 kg 100 m

Standard-Prus 8 mm 1900 kg 100 m

Spectra-Speed 6 mm 1570 kg 100 m



Armour-Prus 8 mm 2800 kg 25 m

Armour-Prus 10 mm 4300 kg 25 m

Standard-Prus Prusik Line

ROPE

At long last, a prusik line that will last. A unique cover blend of Technora and polyester acts like armour over a core of lightweight Spectra 900. Donaghys Spectra® core incorporates a world first safety feature of twin Kevlar strands preventing the core from being cut or melted completely in the unlikely event of a cover failure.

• Verylowstretchandeasytosplice• Technoraisrated234ºChigherthanstandardpolyester

A double braided high tenacity nylon Prusik or accessory line which can be used in all general applications.

• Easy handling and knot holding • Suitable for general applications

Approved for use as Prusik material climbing hitches. Spectra-Speed uses a high tenacity polyester braided cover over a braided Spectra® 900 core.

• Very lightweight with no stretch • Easy to splice • MeetsITCCclimbingcompetitionrules • Certified to Australian Standard AS/NZS 4142.3

Spectra-Speed Prusik Line

Code Product Detail

HS-SL (+ length in m) 3 strand with double action hook

HS-SL (+ length in m) K 3 strand with screw gate karabiner

HS-NARROPLAN H (+ length in m) Kernmantle with double action hook

HS-NARROPLAN K (+ length in m) Kernmantle with screw gate karabiner

HS-NAR ROP LAN (+ length in m) Kernmantle rope only

Rope Safety Lines

Hi-Safe Rope Safety Lines are available in either a 12 mm three strand spliced rope or 11 mm sewn end kernmantle rope in a variety of lengths. All safety lines are finished with a thimble eye and can be supplied with an array of hardware options or supplied with thimble only . Either rope has a break force in excess of 25 kN.

Note other lengths and end fittings on request.

Skylotec GlideCode VSKY R104

An excellent, dynamic 10.5 mm all round abseil rope with great strength and an industry leading 70 grams per metre.

• 2xDrywaterrepellanttreatment• Length:50m,60m,70m• Staticelongation:4.8%• Dynamicelongation:29.0%• Material:Water-resistantPolyamide• EN892compliant

38 39

ROPE CARE

Ferno Rope and Harness Wash Code VAS WASH (500 ml bottle) and VAS WASH 20 (20 L container)

Engel Hot Knife Code VDPS G4480000 (knife), VDPS G4480001 (blade)

Rope Measurer Code DONA-PRP9058M

Bokat Rope Washer Code CMC294060

The Bokat Rope Washer cleans rope with a combination of water pressure and brushing action. The plastic body clamps over the rope and velcro closures allow adjustment to rope size for maximum efficiency. The inside is lined with Astroturf which scrubs the rope as it is pulled through the washer. For use with ropes up to 19 mm in diameter. For optimum rope cleaning, pre-soak rope in Ferno Rope and Harness Wash.

A highly concentrated, blue liquid that is recommended for use with industrial harnesses, access, rigging and lowering ropes. Ferno Rope and Harness Wash is environmentally friendly, bio-degradable and does not contain any phosphates, bleaches or fragrances. It is low foaming, free rinsing with excellent soil removal properties. Available in a 500 mL bottle or 20 L bulk container.

A hot knife/rope cutter for rope and web. This electric handheld unit cuts and fuses the ends of polyester and nylon ropes and webbing. Blade sold separately.

This rope measurer quickly and accurately measures cordage from 4 mm to 19 mm diameter. Counter reads up to 3050 m. Supplied with mounting bracket.

Rope Finishing

Ferno can manufacture rope components to individual specifications including splicing of both standard and double braid synthetic rope along with quality sewing of kernmantle rope with an array of plastic, stainless steel and galvanised steel thimble fittings to ensure a perfect custom solution.

38 39

Riggers Leather Gloves Code SM-RG

CMC Rescue Special-Ops Gloves Code CMC250412/3/4/5

Ringers Authentic Glove Code RING-133

Ringers Rope Rescue Glove Code RING-353

Ringers Extrication Glove - Long Cuff Code RING-304

GLOVES

Manufacturedfromhardwearingleatherwithstitchedingussetedpanelsforstrength and comfort. These riggers/roping gloves will be a welcome addition to yourpersonalprotectionkit.AvailableinsizesM,L,XLandXXL.

CMCRescueSpecial-OpsGlovesbalancetheneedforfingertipdexteritywithhandprotection. These fingerless gloves will protect the hand from nicks, cuts, bruises and abrasions. The Clarino synthetic leather patches on the palm and the fingers provide added durability and protection for rope work. The 3 mm shock absorbing gel padding protects the palm from impacts and vibration. Spandex back and velcro wrist closure provide a snug fit without limiting dexterity. A karabiner loop is sewn into the wrist, allowing you to hang the gloves on your harness gear loop when not inuse.AvailableinS,M,LandXL.

A multi-purpose glove with a hook and loop wrist strap. Features a snug fit design, unique split palm, Clarino® finger and palm patches, tough spandex top material and hidden seams which provide comfort and feel. AvailableinS,M,LandXL.

The Ringers Rope Rescue Glove is ideal for optimum grip and control in inclement weather.Thisgloveensuresasnugfitthatassistswitheffectivedexterity.Thisisachieved through the use of velcro secure elastic closures and Kevlar stitching. The Ringers Rope Rescue Glove utilises uniquely designed gel pads in conjunction with the finger and palm patches, ensuring optimum rope control and hand protection. AvailableinS,M,LandXL.

TheRingersExtricationGlovewithalongcuffisbuiltfordurability.Theseglovesaremade from durable Clarino material, which is tougher than leather. The reinforced index finger and thumb joints, along with the puncture resistant palm pads, make theknuckles,palmsandfingertipsresistanttoabrasions.Theelasticcuffkeepsoutglass and debris, reducing the chance of injury. Despite the toughness of these gloves,theystillprovideenoughfeeltopalpateapulse.AvailableinS,M,LandXL.

Acomfortableleatherglovethatoffersenhancedhandprotection from rope friction. The moisture wicking properties are enhanced by the perforated top leather surface. Exposed fingers provide normal finger dexterity and feel. The full finger provides additional protection. Full Finger 108 g. Half Finger 100 g.

CT Glove Half and Full Finger Code VCT 7X980 (AA, AB, AC, AD) M L XL XXL Half Finger, VCT 7X980 (OA, OB. OC, OD) M L XL XXL Full Finger

40 41

Ferno Rope Bags Code VBS HIVIS (Heavy-Duty), VBS ROP BAG (Standard)

Multi Pouch Code VRES MULTI POUCH

Expedition II Duffel Bag Code VBS EXP 2 HD

Ferno Haul Bag Code VBS HAUL 200 (leather), VBS HAUL 200 C (cordura)

All Purpose Grab Bag Code VBI CARRY

BAGS

The Ferno Heavy-duty Rope Bag keeps your rope conveniently stowed, ready for transportation and quick deployment. It comes with a carry handle, backpack straps, pull tight throat closure and is made from 1000 denier vinyl. Available in 50 m, 100 m, 150 m and 200 m sizes.

The Standard Rope Bag is available in 50 m, 100 m, 150 m and 200 m sizes and is made from 1000 denier cordura. This version comes complete with a single shoulder strap only.

TheMultiPouchisanidealbagfortheconvenientstorageofallrope and rescue gear. The clear faced pouches provide an uninterrupted view of all equipment, assisting in quick identificationanddeployment.TheMultiPouchismadefromtough1000deniernylon.EachMultiPouchfeaturesintegralcarryhandleandbackpackstraps.TheMultiPouchhasbeenafavouritewith emergency services personnel for many years.

The Expedition II Duffle Bag is a sizeable bag with a 75 L capacity that is made tough to carry rescue, industrial or climbing gear. This bag is made from 1680 denier nylon with integral shoulder and carry straps and is a favourite from our outdoor range.

Dimensions: L 750 mm x W 300 mm x H 200 mm

The Ferno Haul Bag is a tough, hard wearing bag that has a safe working load of 250 kg and an impressive 90 L gear capacity. It includes oversized easy to attach haul loops and heavy duty back pack straps. The bag also features two separate pull tight draw strings to secure its load as well a four D-rings around the base for stabilising the load during long distance hauling. Available in either leather or 1680 cordura.

This multi-purpose bag is ideal and large enough for storing your harness and all related gear to make up your own kit. A handy daisy chain is located inside the zipper opening for convenient storage of karabiners and other gear. Available in a variety of colours: maroon, black, red, yellow and blue.

Dimensions: L 580 mm x D 300 mm

Ferno Heavy-duty Rope Bag

Ferno Standard Rope Bag

Bag Dimensions

50 m H 560 mm x D 240 mm

100 m H 700 mm x D 240 mm

Bag Dimensions

150 m H 680 mm x D 300 mm

200 m H 850 mm x D 300 mm

40 41

TRIPODS & DAVITS

Hi-Safe Tripod Code HS-TP10

Hi-Safe Rescue Winch Code HS-RW20T (tripod), HS-RW20D (davit)

A simple, heavy duty tripod developed by industry professionals with years of field experience.

Optional Hi-Safe Rescue Pulley System

The rescue winch has been developed to be attached to either the Hi-Safe Tripod or Davit System. The Rescue Winch utilises a Weston Brake System with steel gears, back up brake and is supplied with 20 m of cable. It works on a basic wind up, wind down principle. The Hi-Safe Rescue Winch is rated at 180 kg with a 7:1 safety factor. Developed for one person working or for two persons rescue. Comes complete with a re-direct pulley. Weight: 7 kg

Key Features • Compact head frame reduces weight and size • Independently adjustable spring loaded legs minimise

the risk of accidental closure. • Galvanised steel construction • 2.3 m head clearance • 2.2 m foot print (at full extension) • Single swivel bolt attachment point • Supplied with foot tether • SWL 180 kg with 7:1 safety factor • Rated 2 person rescue - 1 person working

Hi-Safe Davit System Codes HS-DAV SYS (complete system), HS-DAV B (Davit Base) and HS-DAV A (Davit arm and body)

Key Features • Durable galvinised steel construction • Simple to install and one man portable • Collapsible design • Individual bases can be installed at various work locations

allowing a single davit arm to be used in various locations • 34 kg arm and body • 14 kg base - dimension: 300 mm2

• SWL 180 kg with 8:1 safety factor

The complete Davit System is an ideal solution for scenarios lacking overhead anchor points or areas that cannot be straddled by a tripod.

Optional Hi-Safe Rescue Pulley System

Optional Rescue Winch

Davit arm nested in body

850

1610

18002000

500

Hi-Safe Tripod Bag Code HS-TP CARRY BAG

A purpose made bag for the Hi-Safe Tripod. This bag is made from 1680 black cordura and has a full length zipper, reinforced ends, two carry straps and a full length shoulder strap with padding.

42 43

The Ferno Arachnipod is the world’s most versatile modular total edge management system(TEMS).ComponentscanbeaddedorremovedasrequiredsothattheArachnipod complements existing structural or natural features. The unique design of the patent-pending modular head means the Arachnipod can be constructed intomanydifferentconfigurationsincludingaginpole/monopole,bipod,tripod,quadpod, bridge system and handrail recovery monopole.

For heavy loads, four legs can used to form a quadpod and increase the safe working load (SWL). Its versatility makes it an ideal system for workers in industries such as rescue and emergency services, construction, military, utility services, mining, film and maintenance. Approved to CE Standard EN 795B

Configurations

GinPole/Monopole

A-Frame with Lazy Leg and reverse head

HandrailRecoveryMonopole

Quadpod

Tripod

Tripod as High Directional System Bridge System

A-Frame

Sideways A-Frame using pulley head

ARACHNIPOD

42 43

How It Works

Accessories

Arachnipod Kits

Product Contents Arachnipod KitsArachnipod Industrial

Industrial Plus

Arachnipod Rescue

Rescue Plus

Arachnipod TEMS

Basic tripod (without pulley) 1

Tripod (with pulley head) 1 1 1 1

Foot rope & rope grab 1 1 1 1 1

Arachnipod bag 1 1 1

Rigging plate 1

Spike feet 3

Lazy leg kit inc. Reverse head & bag 1 1

Full accessory kit 1 1

2 m bridge kit 1

The Arachnipod, in its most basic form, is a simple tripod with the three legs independently pivoting from an anodised aluminium head. The modular head has a similar design to a door hinge. Inserting or removing a pin through the centre of the head allows the quick and simple addition or removal of components to create a configuration to suit any edge management scenario. Each head section contains a shackle for guying while an optional in-built twin grooved stainless steel pulley is also available.

Standard foot Hold-down stake Spike foot Soft ground shoe

Gin headWinch and mount

Reverse headQuad plate

Arachnipod step

Equipment bracket

Rigging plate

ThemodulardesignoftheArachnipodofferscustomerstheoptiontopurchaseabasicunitandupgradetomakeamoreadvancedsystem.MinimalspaceisneededtostoreanArachnipod as it flat packs for simple and convenient storage. There are five kits available for purchase, ranging from the basic tripod through to a total edge management system

Accessory kit

* Bridge kit includes extra leg, bag and foot rope

Optional extras3 m bridge kit

4 m bridge kit

Bridge kit stainless steel upgrade kit

Additional standard leg

Additional pulley leg

Gin head

Lazy leg extension kit

10 m winch and mount (6 mm cable)

20 m winch and mount (6 mm cable)

Type 3 fall arrest block and mount

ARACHNIPOD

Lazy leg extender kit Type 3 fall arrest block with mount bracket

Full Accessory Kit Contents QtyAccessory bag 1

Spike feet 4

Gin head 1

Soft ground shoes 4

Hold-down stakes 4

M12Tru-bolts 8

M12masonrydrillbit 2

Spare Qik-link head pins 2

Spare detent pins 2

Spare leg pin with detent pin 1

Steps 2

Equipment bracket 1

Rigging plate 1

Quad plate (shapekeeper) 1

44

HARNESSES

45

HARNESSES

Min-Evac 2P Code UL-160-669-506

Min-Evac Hub Type A Code UL-160-669-505

Min-Evac 2P Hub Type A Code UL-160-669-507

TheMin-Evac2Pisacontrolledratedescentdevicesuitableforselfrescue evacuation for one or two persons. Best for use from structures such as towers, wind turbines, masts, high bay lift trucks and cranes. The length of rope required can be customised to each users requirements

Work height: Up to 160 m for 2 persons at a time. The length of rope supplied can be customised to each users requirements. Rate of descent: 0.8 m per secondRope: 11 mm diameter kernmantle rope, cut to required lengthStandards: EN341 Class A, EN1496 Class A, ANSI Z359.4

TheMin-EvacHubTypeAisacontrolledratedescentdevicewithliftingcapabilities that is suited for single person, self rescue evacuation from structures such as towers, wind turbines, masts, high bay lift trucks and cranes. The 15:1 geared recovery mechanism provides quick retrieval of a fallen or suspended person, minimising the potential for deadly suspension trauma. The hook is lowered and connected to the suspended persons harness fall arrest loops, the rescuer winds the person far enough to release the load on the lanyard. Once released the rescuer can lower or raise the person to safety. The rescue procedure is simple and does place the rescuer in any danger. The rope length can be customised to each users requirements.

Work height: Up to 160 m for 1 person at a time Rate of descent: 0.8 m per secondRope: 11 mm diameter, A.S. approved, kernmantle ropeStandards: EN341 Class A, EN1496 Class A, ANSI Z359.4

TheMin-EvacHubTypeAisacontrolledratedescentdevicewithliftingcapabilities that is suited for either one or two person, self rescue evacuation from structures such as towers, wind turbines, masts, high bay lift trucks and cranes. The 15:1 geared recovery mechanism provides quick retrieval of a fallen or suspended person, minimising the potential for deadly suspension trauma. The hook is lowered and connected to the suspended persons harness fall arrest loops, the rescuer winds the person far enough to release the load on the lanyard. Once released the rescuer can lower or raise the person to safety. The rescue procedure is simple and does place the rescuer in any danger. The rope length can be customised to each users requirements.

Work height: Up to 160 m for 2 persons at a time Rate of descent: 0.8 m per secondRope: 11 mm diameter, A.S. approved, kernmantle ropeStandards: EN341 Class A, EN1496 Class A, ANSI Z359.4

DRAFT

RESCUE DESCENT

Mini-Evac 2P

Mini-Evac Hub Type A

Hub Type A

44

HARNESSES

45

HARNESSES

Lift-Evac Code UL-160-669-509

Lift-Evac Double Code UL-160-669-510

The Lift-Evac is a controlled rate evacuation and descent device that has the ability to raise or lower a worker or casualty. Ideal for work positioning over distances up to 20 m the Lift-Evac provides the user with high levels of safety combined with maximum flexibility for all rescue or rope access situations. Easy to anchor and control and intuitive to use due to its ‘ratchet’ style raise and lower facility. The ratchet handle is telescopic to give more leverage when required and a second handle provides stability and control during use. The Lift-Evac can be used to recover a casualty whilst the rescuer remains in a safe position, or if necessary the rescuer can descend to the casualty whilst maintaining complete control of the device. The length of rope supplied can be customised to each users requirements.

Work height: Up to 160 m for 2 persons at a time (200 kg)Rate of descent: 0.8 m per second descent 0.2 m per second ascent (dependent upon operator competence and fitness) Rope: 11 mm diameter, A.S. approved, kernmantle rope, Standards: EN341 Class A, EN1496 Class B, ANSI Z359.4

The Lift-Evac Double is a a controlled rate evacuation and descent device that has the ability to raise or lower a worker or casualty. Ideal for work positioning over distances up to 30 m the Lift-Evac Double provides the user with high levels of safety combined with maximum flexibility for all rescue or rope access situations. Easy to anchor and control and intuitive to use due to its double handle ‘ratchet’ style raise and lower facility. The ratchet handles are telescopic to give more leverage when required. This makes the raising of two persons very comfortable compared with other rescue products.

TheLift-EvacDoubleisidealforsituationswhereascentoffatallerstructureisrequired or where a faster evacuation from a confined space may be beneficial. The length of rope supplied can be customised to each users requirements.

Work height: Up to 160 m for 2 persons at a time (200 kg)Rate of descent: 0.8 m per second descent 0.4 m per second ascent (dependent upon operator competence and fitness) Rope: 11 mm diameter, A.S. approved, kernmantle rope, Standards: EN341 Class A, EN1496 Class B, ANSI Z359.4

RESCUE DESCENT

46 47

CMC CSR Pulley Kit Code CMC500102

Hi-Safe Rescue Pulley System Code FWE-CSRK (bag), FWE-CSRD (drum)

Res-Q-Link Recovery Pole Code FWE2090

RESCUE & RETRIEVAL

TheCMCCSRPulleyKitis4:1rescuesystem that is provided with a pulley that is easy to release under load. The new aluminium pulleys swivel at both ends of the system eliminating any potential twisting of the lines. The CMCCSRPulleyKitisanexcellentchoice for confined space entry or rope access where a heavy duty pulley system is required. Supplied with 30mCMCRescueStaticProLifeline,2karabiners, 2 pulleys and rope bag

Developed for backup and rescue situations the Hi-Safe Rescue Pulley System has a 4:1 lift advantage and a built-in lift and lock system which can be manually overridden. It comes standardwithatieoffadapterand 50 m of rope allowing approximately 12 m of lift. Supplied standard with a heavy duty rope bag, also available with optional dust proof stowage drum.

Optional drum

The Res-Q-Link is a unique and multi functional rescue pole incorporating many features and benefits including: • Large alloy double action hook compatible with most recovery systems and allowing

two configurations to provide versatility when rescuing a fall victim • Extendable from 150 cm to 280 cm. • Fibreglass outer pole and rubber coated handle for maximum grip and control in

long reach scenarios. • Torch holder for low light scenarios which is compatible with most

slim line torches • Rope and web cutting knife to cut victim free once a recovery system is attached. • Optional aluminium extension handle up to 9 m in length available. • Additional double action hook available (Code VCT L3536201)

Large alloy hook with torch and torch holder (torch not supplied)

Large alloy hook with web cutting knife Large alloy hook, knife in stored position

Ferno Mini Haul Kit Code VKIT MINI HAUL

TheFernoMiniHaulkitisan extremely compact haul kit that will provide a 6:1 mechanical advantage. It features a V-shaped cleat that if required, enables the operatortolockoffthe system during a hauling operation. The FernoMiniHaulKit is rated for one person rescue only.

46 47

Ferno Adjustable Lifting Bridle Code BRB-TLB (24 mm screw gate karabiner), BRB-TLB-TX11S (large screw gate karabiner) and BRB-TLB-LTA (large triplock karabiner)

RESCUE & RETRIEVAL

The Ferno Adjustable Lifting Bridle is designed specifically for use with the Gazelle Basket Stretcher. • Fully adjustable from the bottom of each strap • Drop forged lifting ring, adjusters and sliding bar buckles • UV resistant webbing is rated at 2250 kg (22 kN) BRB-TLB-TX11SBRB-TLB

Ferno Vertical Rescue Stretcher Code VRES STRETCH

Ferno VRS 6 Point Lift Bridle Code BRB-VRS

The Ferno Vertical Rescue Stretcher’s roll-up, compact and lightweight design makes it ideal for high angle, confined space, horizontal or vertical rescue. When deployed the wrap-around concept becomes rigid and gives the patient a feeling of security as well as protecting limbs and body from further injury during evacuation procedures. The Vertical Rescue Stretcher is fitted with many carry handles as well as six lifting slings that provide a good variety of options for transportation and lifting. Also supplied standard is an integral and comprehensive, colour-coded, full body restraint system that includes a padded head restraint, six over body restraints, shoulder and groin straps along with a generous foot strap to assist with vertical lifts. When not in use the Vertical Rescue Stretcher rolls up and is easily housed within the cordura storage bag which doubles as a backpack.

Although the Vertical Rescue Stretcher is supplied standard with six lifting slings the Ferno VRS 6 Point Lift Bridle is designed specifically to fit the Vertical Rescue Stretcher and offerstherescueradditionaladjustmentofthestretcherangle in delicate rescue scenarios. Each adjustable sling arm is colour coded to the stretcher lift handles to ensure correct placement.

Product Specifications

Length Width Weight Load Limit Horizontal

Load Limit Vertical

202 cm 77 cm 8 kg 350 kg 250 kg

Length Width Weight Load Rating

211 cm 62 cm 13 kg 408 kg

Traverse Gazelle Basket Stretcher Code FWETBG

The Traverse Gazelle Basket Stretcher is a basic rescue stretcher designed to be used in a raise/lower operation. Its frame geometry, construction and materials provide its impressive strength. The top and lower rails are made using a 19 mm robust steel tube. Durathene netting allows water and air to easily pass through the patient compartment.

48

HARNESSES

49

An innovative and stylish helmet with an integrated venting system. A unique interior padding system combined with German engineering provides a very comfortable fit with superior safety and impact resistance. Further adjustment and comfort can be had via a unique adjustment dial at the rear of the helmet. Certified to EN 397. Weight 440 g. Contact Ferno for colour options.

The Skybowl combines all the great functions of a lightweight climbing helmet with a unique adjustable ventilation system. The ventilation adjusting mechanism is easy to reach at the back of the helmet and is simple tohandleevenwithgloves.AtthesametimetheSkyBowloffershighcomfort, a mesh spider strap, stage less quick-adjustment a head lamp holder and much more. Certified to European standard EN397. Weight 400 g. Contact Ferno for colour options.

Fits over your helmet and extends beyond the rim to block 100% of UV ray and to stop glare and sun from your face, ears and the back ofyourneck.Madeofdurable,corduranylon,theSunbrerohasanelastic band that grips to the Skylotec helmets and secures to the headlamp retainer clips.

Skylotec Sky Crown Helmet Code VSKY SKYCROWN ORA

Skylotec Skybowl Helmet

The Vertical Sunbrero Code VAS SUNBRERO

Spreader Bar Code VAI SPREADER SHA Patient Lifting Sling Code VRES PAT LIFT+

Used in confined space situations and rescue scenarios. Attaches to confined space pick up points on harness shoulder straps.

AS/NZS 1891.1:2007 approved.

Ideal for retrieval of victims trapped in locations where time and rescue is of the essence. Simple to apply and fully adjustable in confined and difficult situations. Seat and leg loops hold victim securely.

RESCUE & RETRIEVAL

48

HARNESSES

49

TheRPCM(RenewablePhaseChangeMaterial)CoolVestsaresuitableforanyoneworkinginwarmtohottemperaturesforshorttoprolongedperiodsoftime.TheRPCMCoolVestsfeature over-the-shoulder and side strap adjustability and a heavy-duty front zipper for easy on/offwear.ThetotalweightoftheCoolVestislessthan2.3kg.TheCoolVestmaintainsaconstant dry 15°C for up to 2.5 hours in ambient temperature of up to 38°C. Cool packs are dry and do not sweat or produce condensation, leaving you cool, dry and comfortable. Unlike conventional ice and gel packs which take hours to freeze, one of the most exciting features of the Cool Packs is their ability to recharge in only 20 minutes in ice water or 30 minutes in the refrigerator or freezer. Keep a set of charged Cool Packs on site in a portable cooler for quick and easy changeovers. The chemical in the Cool Packs is completely non-toxic, non-flammable, safe and environmentally friendly. Should the Cool Packs rupture,itiseasilywashedoffwithmildsoapandwater.

High Visibility RPCM Cool Vest Code GT-SCV-YR (lime green) and GT-SCV-OR (orange)

Fire Retardant RPCM Cool Vest Code GT-SCV-FR

Classic RPCM Cool Vest Code GT-SCV-RB

RPCM Cool Pack Set of Four Code GT-RSPS15XX

RPCM Cool Vest

COOL VEST

TheHighVisibilityRPCMCoolVestisidealforusewherehigh visibility garments are required. This Cool Vest Conforms to AS-4602.TheHighVisibilityRPCMCoolVestfeatures over-the-shoulder and side strap adjustability. In addition, this vest features a heavy-duty front zipper that assists with ease of wearability.

TheFireRetardantRPCMCoolVestisspecificallyconstructedfromfireretardantmaterials. It is ideal for workers in environments where sparks or flames are present, making this garment ideal for firefighters and welders.

TheClassicRPCMCoolVestismadefromhardwearingbluecottontwill. In addition, this vest features a heavy-duty front zipper that assists with ease of wearability.TheClassicRPCMCoolVestprovidestheuserwithmaximumergonomiccomfort.

RPCMcoolpackscomeinsetsoffourandareeasilyrechargeable.Theycanbecompletelyrecharged in ice water in only 20 minutes or in a refrigerator or freezer in 30 minutes. It is easytotellwhentheRPCMCoolPacksarecompletelycharged,astheclearliquidinsideturnsasolidwhitecolour.AllRPCMCoolVestsaresuppliedwithasetoffourrechargeableRPCMCoolPacks.Additionalcoolpacksaresoldseparately.

50 51

ARBOR ACCESSORIES

SPARKClimbing Rope

Size (Dia) Weight/100 m Break Strength SWL Reel Length12 mm 8.3 kg 3523 kg 352 kg 100 m

% of Break Strength 10% 20% 30%Elastic Elongation 2.5% 3.6% 5.2%

% of Break Strength 10% 20% 30%Elastic Elongation 2.5% 3.4% 4.5%

NRGClimbing Rope

Size (Dia) Weight/100 m Break Strength SWL Reel Length12 mm 9 kg 3204 kg 320 kg 200 m

Constructed using a tough 16 strand braided polyester cover with a kernmantle core then stabilised to create an ideal hard wearingcosteffectiveclimbingline.

NRG is a high performance 12 mm, 24 strand climbing line designed for use in sports climbing and professional Arborist applications. NRG is lightweight with excellent knot holding abilities and allows easy access into trees with great foot locking capabilities.

• Knobbly cover construction for easy handling • Excellent bend ratio • Lightweight • Low stretch for excellent foot locking • Kernmantle core construction • Works well with hardware • MeetsANSIZ-133standards

• Fully spliceable cover dependent construction • Low stretch and highly visible • Lightweight • Wears well with high abrasion resistant low snag

polyester cover • Kernmantle core construction • MeetsANSIZ-133standards

Rope Savers

Ferno Rope Savers are available in a varietyofsizesandincludetwodifferentsized steel rings connected to heavy-duty, industrial rated polyester webbing. Ferno Rope Savers minimise damage to the tree and provide consistent friction on the climbing rope.

(1)

(2)

(3)

(5)

• (1) VARB RS1500 - Rope Saver 1500 mm Red • (2) VARB RS1800 - Rope Saver 1800 mm Fluoro Yellow • (3) VARB RS900 - Rope Saver 900 mm Red • (4) VARB RS1200 - Rope Saver 1200 mm Blue • (5) VARB RS600 - Rope Saver 600 mm Fluoro Yellow

Throw Bags Code VARB TB 250, VARB TB250 D (Dipped), VARB TB400 and VARB TB400 D (Dipped)

These hard wearing, rip resistant throw bags are filled with either 250 g or 400 g of lead shot. Each Throw Bag includes a 2.5 cm steel ring for attachment to throwing line. Also available with white heavy-duty rubber dip for increased wear resistance and longer life as wellasofferinggreatervisibility(colourmayveryfromshown).

(4)

The Ferno Shotbag consists of a dipped throw bag attached to 30 m of cord all housed in a convenient storage bag.

Ferno ShotbagCode VKIT THROW BAG

50 51

ARBOR ACCESSORIES

Tool Strops

Fernoofferarangeofstandardtoolstrops(alsoknownastoollanyards)aswellaselasticisedandtearawayversions.Thetearawaystrop is constructed with a tearaway safety strap that is designed to absorb the force or shock load of a chainsaw or heavy tool fall. The safety strap will begin to tear when approximately 30 kg or greater of force is applied. It is also available in an elasticised version that reduces the length of the strop when not under load and to minimise entanglement in the work area.

Standard and Elasticised

• (1) VARB TS 900 - Tool Strop Basic 900 mm Blue • (2) VARB TS 1200 - Tool Strop Basic 1200 mm Red • (3) VARB TS 900 EL - Tool Strop Basic Elastic 900 mm Blue • (4) VARB TS 2LL - Tool Strop 2 Loop 1200 mm Red • (5)VARBTSMINI-ToolStropBasicMiniBlue

• (1) VARB TS T/A 1200 - Tool Strop Tearaway 1200 mm Red • (2) VARB TS T/A 900 - Tool Strop Tearaway 900 mm Blue • (3) VARB TS T/A EL - Tool Strop Tearaway Elastic 1200 mm Red

Tearaway: Standard and Elasticised

(1)

(2)(3)

(4)(5)

(1)(2)

(3)

Spike Pads Code VARB TSP (T-Spike), Code VARB OSP (Oval Spike)

Tough, pliable black leather with a soft padded inner felt. Large 40 mm thread holes provide easy strap point adjustability for a comfortable fit.

Gear Bag Code VARB GB

A universal, heavy-duty Cordura bag with robust handle and draw-string top. Self supporting but still capable of collapsing for storage.

Dimensions: L 150 mm, W 150 mm, D 150 mm

DRAFT

52

ARBOR HARNESSES

1

2

3

3 4

5 6

1

2

3

3

4

6

1

2

3

4

5

5

1

2

3

4

4

5

66 7

Ferno Arbor Agro Code VARB AGRO

Ferno Arbor Rite Code VARB RITE

Ferno Arbor Sport Code VARB SPORT

Ferno Arbor Lite Code VARB LITE


1 Legpadacceptsaremovablesupportbartoreducefatigueandincreasecomfortwhensuspended

2 Widelumbarpadwithsemi-rigidshankprovidingcomfortable support

3 UpperD-ringpolestrapattachmentspositionedforcomfortandcontrol

4 Rearhaulloopensuressecondarylinesareclear5 LowerO-ringacceptsreplaceablefrontrunnerwithtwinslidingD-rings

6 Adjustablepaddedlegloops,waistandrearrisers• ManufacturedinourAS/NZ1891.1:2007accredited

manufacturing facility• Onesizefitsall


1 Widelumbarpadwithrigidshankprovidingcomfortable support

2 Singlewidelegpadacceptsaremovablesupportbartoreducefatigueandincreasecomfortwhensuspendedforlonger stints

3 Rearhaulloopensuressecondarylinesareclear4 UpperD-ringpolestrapattachmentspositionedforcomfortandcontrol

5 AdditionalD-ringsarelocatedatrearhipforfastattachment of pole strap or tool attachment

6 LowerO-ringwithtwinD-ringrunner7 Adjustablepaddedlegloops,waistandrearrisersensuretheperfectfit

• AustralianStandardsapprovedtoAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXL


1 Single,ultrawideseatwithindividuallegretainersallowfreedomofmovementwhilemaintaininglargesurface area comfort

2 Extrawidelumbarpadwith3Dmeshforcoolingandmoisturewicking

3 Rearhaullooptoensuresecondarylinesareclearduringclimbing

4 Replaceabletwinringroperunner5 Balancedpolestrapattachmentpoints6 4 x metallic gear loops• ManufacturedinourAS/NZ1891.1accredited

manufacturing facility• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXL


1 Widelumbarpadforaddedcomfort2 Single,ultrawideseatwithindividuallegretainersallowfreedomofmovementwhilemaintaininglargesurface area comfort

3 TwinpolestrapattachmentD-ringspositionedforbalanceandcontrol

4 Multiple metallic rear tool loops• ManufacturedinourAS/NZ1891.1accredited

manufacturing facility• Onesizefitsall

52

Acknowledgements

Ferno wish to acknowledge Height Dynamics for their assistance in obtaining the GABBA action photos.

Designer: Choice Creative

Distributor

EmergencyRescueHeight SafetyRock ClimbingHome CareMortuary

Ferno AustraliaHead Office11 Johnstone Road Brendale Qld 4500 Australia

Call toll free 1800 804 647p +61 7 3881 4999f +61 7 3881 1125

VIC18 Damosh Avenue Carrum Downs VIC 3201 p +61 3 9775 1260f +61 3 9775 1360

WA22 Casella Place Kewdale WA 6105 p +61 8 9353 2300f +61 8 9353 1169

www.ferno.com.au

0004

0

Documents

Height Safety Catalogue - Ferno Ferno Height Safety Ca… · enhance the safety and control of individuals whose undertaking involves personal risk and our aim is to provide them