Embed Size (px)
Citation preview
MAINTENANCE AND ENGINEERING 02GMOS FERRYBRIDGE
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
RWE Generation UK
GMOS Ferrybridge Maintenance & Engineering
Old Great North Road Knottingley West Yorkshire WF11 8PR United Kingdom
T +44 (0)1977 632201 F +44 (0)1977 632311www.rwe.com/gmos
HEAVY MACHINING AND BALANCING
Following major investment in CNC plant, our GMOS engineering
workshop has superb capabilities in heavy machining.
Cranes
120 tonne and 75 tonne crane capacity
Lathes
Safop 80 100 tonnes 17m centres 4.3m swing
Craven 40 tonnes 10m centres 3.0m swing
Safop 40 Lathe Grinder 20 tonnes 5.95m centres 1.24m swing
Safop 70L CNC 60 tonnes 12m centres 2m swing
Horizontal borers
Union Horizontal Borer 100 tonnes 4m vertical 14m horizontal
Kearns SH75 2 tonnes 1.0m square indexing table
Vertical borers
Froriep 25 tonnes 5.5m dia 1.8m turning height
Broadbent 8 tonnes 3.3m dia
Webster & Bennett 1.8m table diameter
Balancing machines (low speed)
Schenk H9V 100 tonnes 12m long x 4.8m diameter
Schenk H9V 50 tonnes 8.4m long x 4.8m diameter
Schenk K50V 4 tonnes 5.2m long x 1.8m diameter
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
MAINTENANCE AND ENGINEERING 01 MAINTENANCE AND ENGINEERING 03GMOS FERRYBRIDGE GMOS FERRYBRIDGE
MAINTENANCE AND ENGINEERING 04
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
GMOS FERRYBRIDGE
REPAIR AND REFURBISHMENTMANUFACTURING
Our workshop is superbly equipped to deal with a
wide range of components and provides quality
repairs and refurbishment of engineering
equipment, such as pumps, valves and gearboxes.
Specialist Engineering Services
We have specialist skills in the repair of steam, gas
and renewable power plant components. Blasting Services
We have one of the UK’s largest self-contained grit
blast booths, capable of grit blasting components
up to 50t, 4.6m diameter.
Spare parts can be manufactured and supplied
to customers’ drawings or, where detailed
manufacturing information is not available
we can re-engineer components, capturing
the required information from samples.
Our machine shop has a range of modern
CNC machining centres available to undertake
sub-contract machining and component
manufacture. We have a range of CNC
lathes and modern milling machines.
120t 0.01 The GMOS workshop can manufacture components up to 120 tonnes
0.01mm tolerance on positional accuracy
50tThe GMOS blasting booth can blast components of up to 50 tonnes
The GMOS blasting booth can blast components of up to 4.6m diameter
4.6m
Our engineering workshop based in the heart
of Yorkshire is a comprehensive heavy
engineering facility. We have an extensive range
of machine tools which, together with our team
of highly skilled craftsmen, consistently deliver
exceptional performance.
The GMOS engineering workshop was established
over 40 years ago as a mechanical engineering
service provider to the power industry. This facility
is now available to undertake sub-contract machinery
and fabrication services to the UK market.
Significant investment in new equipment, including
the latest CNC machine tools, means we can
manufacture components to the highest standards
and exacting customer requirements.
Our workshop can manufacture small precision parts
and large specialist components up to 120 tonnes in
our 5000 sqm facility.
MAINTENANCE AND ENGINEERING 02GMOS FERRYBRIDGE
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
RWE Generation UK
GMOS Ferrybridge Maintenance & Engineering
Old Great North Road Knottingley West Yorkshire WF11 8PR United Kingdom
T +44 (0)1977 632201 F +44 (0)1977 632311www.rwe.com/gmos
HEAVY MACHINING AND BALANCING
Following major investment in CNC plant, our GMOS engineering
workshop has superb capabilities in heavy machining.
Cranes
120 tonne and 75 tonne crane capacity
Lathes
Safop 80 100 tonnes 17m centres 4.3m swing
Craven 40 tonnes 10m centres 3.0m swing
Safop 40 Lathe Grinder 20 tonnes 5.95m centres 1.24m swing
Safop 70L CNC 60 tonnes 12m centres 2m swing
Horizontal borers
Union Horizontal Borer 100 tonnes 4m vertical 14m horizontal
Kearns SH75 2 tonnes 1.0m square indexing table
Vertical borers
Froriep 25 tonnes 5.5m dia 1.8m turning height
Broadbent 8 tonnes 3.3m dia
Webster & Bennett 1.8m table diameter
Balancing machines (low speed)
Schenk H9V 100 tonnes 12m long x 4.8m diameter
Schenk H9V 50 tonnes 8.4m long x 4.8m diameter
Schenk K50V 4 tonnes 5.2m long x 1.8m diameter
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
MAINTENANCE AND ENGINEERING 01 MAINTENANCE AND ENGINEERING 03GMOS FERRYBRIDGE GMOS FERRYBRIDGE
MAINTENANCE AND ENGINEERING 04
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
GMOS FERRYBRIDGE
REPAIR AND REFURBISHMENTMANUFACTURING
Our workshop is superbly equipped to deal with a
wide range of components and provides quality
repairs and refurbishment of engineering
equipment, such as pumps, valves and gearboxes.
Specialist Engineering Services
We have specialist skills in the repair of steam, gas
and renewable power plant components. Blasting Services
We have one of the UK’s largest self-contained grit
blast booths, capable of grit blasting components
up to 50t, 4.6m diameter.
Spare parts can be manufactured and supplied
to customers’ drawings or, where detailed
manufacturing information is not available
we can re-engineer components, capturing
the required information from samples.
Our machine shop has a range of modern
CNC machining centres available to undertake
sub-contract machining and component
manufacture. We have a range of CNC
lathes and modern milling machines.
120t 0.01 The GMOS workshop can manufacture components up to 120 tonnes
0.01mm tolerance on positional accuracy
50tThe GMOS blasting booth can blast components of up to 50 tonnes
The GMOS blasting booth can blast components of up to 4.6m diameter
4.6m
Our engineering workshop based in the heart
of Yorkshire is a comprehensive heavy
engineering facility. We have an extensive range
of machine tools which, together with our team
of highly skilled craftsmen, consistently deliver
exceptional performance.
The GMOS engineering workshop was established
over 40 years ago as a mechanical engineering
service provider to the power industry. This facility
is now available to undertake sub-contract machinery
and fabrication services to the UK market.
Significant investment in new equipment, including
the latest CNC machine tools, means we can
manufacture components to the highest standards
and exacting customer requirements.
Our workshop can manufacture small precision parts
and large specialist components up to 120 tonnes in
our 5000 sqm facility.
MAINTENANCE AND ENGINEERING 01 MAINTENANCE AND ENGINEERING 03GMOS FERRYBRIDGE GMOS FERRYBRIDGE
MAINTENANCE AND ENGINEERING 04
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
GMOS FERRYBRIDGE
REPAIR AND REFURBISHMENTMANUFACTURING
Our workshop is superbly equipped to deal with a
wide range of components and provides quality
repairs and refurbishment of engineering
equipment, such as pumps, valves and gearboxes.
Specialist Engineering Services
We have specialist skills in the repair of steam, gas
and renewable power plant components. Blasting Services
We have one of the UK’s largest self-contained grit
blast booths, capable of grit blasting components
up to 50t, 4.6m diameter.
Spare parts can be manufactured and supplied
to customers’ drawings or, where detailed
manufacturing information is not available
we can re-engineer components, capturing
the required information from samples.
Our machine shop has a range of modern
CNC machining centres available to undertake
sub-contract machining and component
manufacture. We have a range of CNC
lathes and modern milling machines.
120t 0.01 The GMOS workshop can manufacture components up to 120 tonnes
0.01mm tolerance on positional accuracy
50tThe GMOS blasting booth can blast components of up to 50 tonnes
The GMOS blasting booth can blast components of up to 4.6m diameter
4.6m
Our engineering workshop based in the heart
of Yorkshire is a comprehensive heavy
engineering facility. We have an extensive range
of machine tools which, together with our team
of highly skilled craftsmen, consistently deliver
exceptional performance.
The GMOS engineering workshop was established
over 40 years ago as a mechanical engineering
service provider to the power industry. This facility
is now available to undertake sub-contract machinery
and fabrication services to the UK market.
Significant investment in new equipment, including
the latest CNC machine tools, means we can
manufacture components to the highest standards
and exacting customer requirements.
Our workshop can manufacture small precision parts
and large specialist components up to 120 tonnes in
our 5000 sqm facility.
MAINTENANCE AND ENGINEERING 02GMOS FERRYBRIDGE
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
RWE Generation UK
GMOS Ferrybridge Maintenance & Engineering
Old Great North Road Knottingley West Yorkshire WF11 8PR United Kingdom
T +44 (0)1977 632201 F +44 (0)1977 632311www.rwe.com/gmos
HEAVY MACHINING AND BALANCING
Following major investment in CNC plant, our GMOS engineering
workshop has superb capabilities in heavy machining.
Cranes
120 tonne and 75 tonne crane capacity
Lathes
Safop 80 100 tonnes 17m centres 4.3m swing
Craven 40 tonnes 10m centres 3.0m swing
Safop 40 Lathe Grinder 20 tonnes 5.95m centres 1.24m swing
Safop 70L CNC 60 tonnes 12m centres 2m swing
Horizontal borers
Union Horizontal Borer 100 tonnes 4m vertical 14m horizontal
Kearns SH75 2 tonnes 1.0m square indexing table
Vertical borers
Froriep 25 tonnes 5.5m dia 1.8m turning height
Broadbent 8 tonnes 3.3m dia
Webster & Bennett 1.8m table diameter
Balancing machines (low speed)
Schenk H9V 100 tonnes 12m long x 4.8m diameter
Schenk H9V 50 tonnes 8.4m long x 4.8m diameter
Schenk K50V 4 tonnes 5.2m long x 1.8m diameter
GMOS FERRYBRIDGE MAINTENANCE & ENGINEERING
