3
SKU 42820 For technical questions, please call 1-800-444-3353. SPECIFICATIONS Weight Capacity 2-1/2 Tons (5,000 lb.) Maximum Height 31-5/8" Minimum Height 5-3/4" ASSEMBLY Install the Foot Pedal The Pedal Link (41) is already assembled to the body of the jack. 1. To attach the Foot Pedal (38), pass the Bolt (42) through the Pedal Link and Foot 2. Pedal, and fix in place using Washer (40) and Nut (39). Note: The Foot Pedal (38) can be used to raise the Saddle. Mount the Handle Assembly into Position. First loosen the Nut (34) and Bolt (36) which are located just below the hole for the 3. handle in the Handle Socket (35). Insert the Handle (72) into the Handle Socket. Be sure it is properly seated. Re- 4. tighten the bolt and nut to secure the handle in place. Note: Some parts are listed and shown for illustration purposes only and are not avail- able individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTA- TION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Heavy Duty 2.5 Ton Long Frame Floor Jack Product Manual

Embed Size (px)

DESCRIPTION

Heavy Duty 2.5 Ton Long Frame Floor Jack Product Manual

Citation preview

Page 1: Heavy Duty 2.5 Ton Long Frame Floor Jack Product Manual

SKU 42820 For technical questions, please call 1-800-444-3353.

SpeciFicationSWeight Capacity 2-1/2 Tons (5,000 lb.)Maximum Height 31-5/8"Minimum Height 5-3/4"

aSSembly

install the Foot pedal

The Pedal Link (41) is already assembled to the body of the jack. 1.

To attach the Foot Pedal (38), pass the Bolt (42) through the Pedal Link and Foot 2. Pedal, and fix in place using Washer (40) and Nut (39).

note: The Foot Pedal (38) can be used to raise the Saddle.

mount the Handle assembly into position.

First loosen the Nut (34) and Bolt (36) which are located just below the hole for the 3. handle in the Handle Socket (35).

Insert the Handle (72) into the Handle Socket. Be sure it is properly seated. Re-4. tighten the bolt and nut to secure the handle in place.

note: Some parts are listed and shown for illustration purposes only and are not avail-able individually as replacement parts.

pleaSe ReaD tHe FolloWinG caReFUlly THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTA-TION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 2: Heavy Duty 2.5 Ton Long Frame Floor Jack Product Manual

SKU 42820 For technical questions, please call 1-800-444-3353.

part Description Q’ty1 Snap Ring 12 Washer 23 O Ring 14 Pressure Piston 15 Pressure Piston Ring 16 Sealing Washer 17 O Ring 18 O Ring Retainer 19 Snap Ring 1

10 Cylinder 111 Housing 112 Oil Filler Plug 113 Cylinder Base 114 4mm Steel Ball 115 Spring Seat 116 Spring 117 Over Pressure Valve 118 Sealing Washer 119 Over Pressure Valve Plug Screw 120 6mm Steel Ball 321 O Ring 122 Release Valve Rod 123 Washer 124 Oil Valve 125 Washer 126 Pump Cylinder 127 Y Ring 128 O Ring 129 Dirt Proof Boot 130 Pump Plunger 131 Pin Rod 232 Washer 233 Torsion Spring (set of 2) 134 M10 Nut 135 Handle Socket 136 M10 x 50 Bolt 137 E-clip 1038 Pedal 1

part Description Q’ty39 M10 Lock Nut 140 Spring Washer 141 Pedal Link 142 M10 x 55 Bolt 143 Pedal Rod 144 Rod 145 Rod 246 Rod 647 Spring Washer 1248 Nut 1249 Rod 150 Snap Ring 151 M12 x 1.25 Lock Nut 252 Rear Wheel 253 M18 x 1.5 Nut 254 18mm Spring Washer 255 Arm Shaft 156 Frame 257 M16 x 1.5 Nut 258 Washer 259 Shaft Sleeve 260 Front Wheel 261 Front Wheel Shaft 162 Saddle Base 163 Rod 164 Rod Link 265 Arm 166 Pin 167 Saddle 168 Rod 169 Spring 270 Cover 171 Handle Sleeve 272 Handle 173 Handle Knob 174 Pin 175 Convey Knob 1

paRtS liSt

Page 3: Heavy Duty 2.5 Ton Long Frame Floor Jack Product Manual

SKU 42820 For technical questions, please call 1-800-444-3353.

aSSembly DiaGRam