HeadingNo.

78.01

78.02

78.03

78.04

78.05

H.S.Code

7801.10

7801.91

7801.99

7802.00

7803.00

7804.11

7804.19

7804.20

7805.00

Unwrought lead.

- Refined lead

- Other:

- Containing by weight antimony as theprincipal other element

Other

Lead waste and scrap.

Lead bars, rods, profiles and wire.

Lead plates, sheets, strip and foil; leadpowders and flakes.

Plates, sheets, strip and foil:

Sheets, strip and foil of a thickness(excluding any backing) not exceeding0.2 mm

Other

Powders and flakes

Lead tubes, pipes and tube or pipe fittings(for example, couplings, elbows, sleeves).

Other articles of lead.78.06 7806.00

379

CHAPTER 79

Zinc and articles thereof

Note.

I.- In this Chapter the following expressions have the meanings herebyassigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have auniform solid cross-section along their whole length in the shape ofcircles, ovals, rectangles (including squares), equilateral triangles orregular convex polygons (including "flattened circles" and "modifiedrectangles", of which two opposite sides are convex arcs, the other twosides being straight, of equal length and parallel). Products with arectangular (including square), triangular or polygonal cross-sectionmay have corners rounded along their whole length. The thickness ofsuch products which have a rectangular (including "modified rectangu-lar") cross-section exceeds one-tenth of the width. The expression alsocovers cast or sintered products, of the same forms and dimensions,which have been subsequently worked after production (otherwise thanby simple trimming or de-scaling), provided that they have not therebyassumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not,-of auniform cross-section along their whole length, which do not conform toany of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubesor pipes. The expression also covers cast or sintered products, of thesame forms, which have been subsequently worked after production(otherwise than by simple trimming or de-scaling), provided that theyhave not thereby assumed the character of articles or products of otherheadings.

(c) Wire

Rolled, extruded or drawn products, in coils, which have a uniform solidcross-section along their whole length in the shape of circles, ovals,rectangles (including squares), equilateral triangles or regular convexpolygons (including "flattened circles" and "modified rectangles", ofwhich two opposite sides are convex arcs, the other two sides beingstraight, of equal length and parallel). Products with a rectangular(including square), triangular or polygonal cross-section may havecorners rounded along their whole length. The thickness of suchproducts which have a rectangular (including "modified rectangular")cross-section exceeds one-tenth of the width.

(d) Plates, sheets , strip and foil

Flat-surfaced products (other than the unwrought products of headingNo. 79.01), coiled or not, of solid rectangular (other than square) cross-

380

section with or without rounded corners (including "modified rec-tangles" of which two opposite sides are convex arcs, the other two sidesbeing straight, of equal length and parallel) of a uniform thickness,which are:

- of rectangular (including square) shape with a thickness not exceedingone-tenth of the width.

- of a shape other than rectangular or square, of any size provided thatthey do not assume the character of articles or products of otherheadings.

Heading No. 79.05 applies, inter alia, to plates, sheets, strip and foilwith patterns (for example, grooves, ribs, chequers, tears, buttons,lozenges) and to such products which have been perforated, corrugated,polished or coated, provided that they do not thereby assume thecharacter of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section withonly one enclosed void along their whole length in the shape of circles,ovals, rectangles (including squares), equilateral triangles or regularconvex polygons, and which have a uniform wall thickness. Productswith a rectangular (including square), equilateral triangular or regularconvex polygonal cross-section, which may have corners rounded alongtheir whole length, are also to be considered as tubes and pipes providedthe inner and outer cross-sections are concentric and have the sameform and orientation. Tubes and pipes of the foregoing cross-sectionsmay be polished, coated, bent, threaded, drilled, waisted, expanded,cone-shaped or fitted with flanges, collars or rings.

Subheading Note.

1.- In this Chapter the following expressions have the meanings herebyassigned to them:

(a) Zinc , not alloyed

Metal containing by weight at least 97.5% of zinc.

(b) Zinc alloys

Metallic substances in which zinc predominates by weight over each ofthe other elements , provided that the total content by weight of suchother elements exceeds 2.5%.

(c) Zinc dust

Dust obtained by condensation of zinc vapour, consisting of sphericalparticles which are finer than zinc powders. At least 80% by weight ofthe particles pass through a sieve with 63 micrometres (microns) mesh.It must contain at least 85% by weight of metallic zinc.

381

HeadingNo.

H.S.Code

79.01 Unwrought zinc.

- Zinc, not alloyed:

7901.11 - - Containing by weight 99.99% or more ofzinc

7901.12 - - Containing by weight less than 99.99%aof zinc

7901.20 - Zinc alloys

79.02 7902.00 Zinc waste and scrap.

79.03 Zinc dust, powders and flakes.

7903.10 - Zinc dust

7903.90 - Other

79.04 7904.00 Zinc bars, rods, profiles and wire.

79.05 7905.00 Zinc plates, sheets, strip and foil.

79.06 7906.00 Zinc tubes , pipes and tube or pipe fittings(for example, couplings , elbows, sleeves).

79.07 Other articles of zinc.

7907.10 Gutters, roof capping, skylight framesand other fabricated building components

7907.90 Other

382

CHAPTER 80

Tin and articles thereof

Note.

1.- In this Chapter the following expressions have the meanings herebyassigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have auniform solid cross-section along their whole length in the shape ofcircles, ovals, rectangles (including squares), equilateral triangles orregular convex polygons (including "flattened circles" and "modifiedrectangles", of which two opposite sides are convex arcs, the other twosides being straight, of equal length and parallel). Products with arectangular (including square), triangular or polygonal cross-sectionmay have comers rounded along their whole length. The thickness ofsuch products which have a rectangular (including "modified rectangu-lar") cross-section exceeds one-tenth of the width. The expression alsocovers cast or sintered products, of the same forms and dimensions,which have been subsequently worked after production (otherwise thanby simple trimming or de-scaling), provided that they have not therebyassumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of auniform cross-section along their whole length, which do not conform toany of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubesor pipes. The expression also covers cast or sintered products, of thesame forms, which have been subsequently worked after production(otherwise than by simple trimming or de-scaling), provided that theyhave not thereby assumed the character of articles or products of otherheadings.

(c) Wire

Rolled, extruded or drawn products, in coils, which have a uniform solidcross-section along their whole length in the shape of circles, ovals,rectangles (including squares), equilateral triangles or regular convexpolygons (including "flattened circles" and "modified rectangles", ofwhich two opposite sides are convex arcs, the other two sides beingstraight, of equal length and parallel). Products with a rectangular(including square), triangular or polygonal cross-section may havecomers rounded along their whole length. The thickness of suchproducts which have a rectangular (including "modified rectangular")cross-section exceeds one-tenth of the width.

(d) Plates, sheets , strip and foil

Flat-surfaced products (other than the unwrought products of headingNo. 80.01), coiled or not, of solid rectangular (other than square) cross-

383

section with or without rounded corners (including "modified rec-tangles" of which two opposite sides are convex arcs, the other two sidesbeing straight, of equal length and parallel) of a uniform thickness,which are:

- of rectangular (including square) shape with a thickness not exceedingone-tenth of the width,

- of a shape other than rectangular or square, of any size provided thatthey do not assume the character of articles or products of otherheadings.

Headings Nos. 80.04 and 80.05 apply , inter alia , to plates, sheets,strip and foil with patterns (for example, grooves, ribs, chequers, tears,buttons, lozenges) and to such products which have been perforated,corrugated, polished or coated, provided that they do not therebyassume the character of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section withonly one enclosed void along their whole length in the shape of circles,ovals, rectangles (including squares), equilateral triangles or regularconvex polygons, and which have a uniform wall thickness. Productswith a rectangular (including square), equilateral triangular or regularconvex polygonal cross-section, which may have corners rounded alongtheir whole length, are also to be considered as tubes and pipes providedthe inner and outer cross-sections are concentric and have the sameform and orientation. Tubes and pipes of the foregoing cross-sectionsmay be polished, coated, bent, threaded, drilled, waisted, expanded,cone-shaped or fitted with flanges, collars or rings.

Subheading Note.

1.- In this Chapter the following expressions have the meanings herebyassigned to them:

(a) Tin, not alloyed

Metal containing by weight at least 99% of tin, provided that the contentby weight of any bismuth or copper is less than the limit specified in thefollowing table:

TABLE-Other elements

Element Limiting content % by weight

Bi BismuthCu Copper

0.10.4

384

(b) Tin alloys

Metallic substances in which tin predominates by weight over each ofthe other elements, provided that:

(i) the total content by weight of such other elements exceeds 1%; or

(ii) the content by weight of either bismuth or copper shall be equal toor greater than the limit specified in the foregoing table.

HeadingNo.

80.01

80.02

80.03

80.04

80.05

80.06

80.07

186137 2B

H.S.Code

8001.10

8001.20

8002.00

8003.00

8004.00

8005.10

8005.20

8006.00

8007.00

Unwrought tin.

- Tin, not alloyed

- Tin alloys

Tin waste and scrap.

Tin bars, rods, profiles and wire.

Tin plates, sheets and strip, of a thicknessexceeding 0.2 mm.

Tin foil (whether or not printed or backedwith paper, paperboard, plastics or similarbacking materials ), of a thickness(excluding any backing ) not exceeding 0.2mm; tin powders and flakes.

- Foil

- Powders and flakes

Tin tubes, pipes and tube or pipe fittings(for example, couplings, elbows, sleeves).

Other articles of tin.

385

CHAPTER 81

Other base metals ; cermets; articles thereof

Subheading Note.

1.- Note I to Chapter 74, defining "bars and rods", "profiles", "wire" and"plates, sheets, strip and foil" shall apply, mutatis mutandis, to this Chapter.

HeadingNo.

81.01

81.02

81.03

H.S.Code

8101.10

8101.91

8101.92

8101.93

8101.99

8102.10

8102.91

8102.92

8102.93

8102.99

8103.10

8103.90

Tungsten (wolfram) and articles thereof,including waste and scrap.

- Powders

Other:

Unwrought tungsten, including bars androds obtained simply by sintering; wasteand scrap

Bars and rods, other than thoseobtained simply by sintering, profiles,plates, sheets, strip and foil

- Wire

Other - -

Molybdenum and articles thereof, includingwaste and scrap.

- Powders

- Other:

Unwrought molybdenum, including barsand rods obtained simply by sintering;waste and scrap

- Bars and rods, other than thoseobtained simply by sintering, profiles,plates, sheets, strip and foil

Wire

- - Other

Tantalum and articles thereof, includingwaste and scrap.

Unwrought tantalum, including bars androds obtained simply by sintering; wasteand scrap; powders

Other

386

ti

HeadingNo.

81.04

81.05

81.06

81.07

81.08

81.09

81.01

186137 282

H.S.Code

8104.11

8104.19

8104.20

8104.30

8104.90

8105.10

8105.90

8106.00

8107.10

8107.90

8108.10

8108.90

8109.10

8109.90

8110.00

Magnesium and articles thereof, includingwaste and scrap.

Unwrought magnesium:

- Containing at least 99.8% by weight ofmagnesium

Other

Waste and scrap

Raspings, turnings and granules, gradedaccording to size; powders

Other

Cobalt mattes and other intermediateproducts of cobalt metallurgy ; cobalt andarticles thereof, including waste and scrap.

- Cobalt mattes and other intermediateproducts of cobalt metallurgy; unwroughtcobalt; waste and scrap: powders

- Other

Bismuth and articles thereof, includingwaste and scrap.

Cadmium and articles thereof, includingwaste and scrap.

- Unwrought cadmium; waste and scrap;powders

- Other

Titanium and articles thereof, includingwaste and scrap.

- Unwrought titanium ; waste and scrap

- Other

Zirconium and articles thereof, includingwaste and scrap.

- Unwrought zirconium; waste and scrap;powders

- Other

Antimony and articles thereof, includingwaste and scrap.

387

HeadingNo.

81.11

81.12

H.S.Code

8111.00

8112.11

8112.19

8112.20

8112.30

8 1 12.40

8112.91

8112.99

Manganese and articles thereof, includingwaste and scrap.

Beryllium , chromium, germanium,vanadium, gallium , hafnium , indium,niobium (columbium ), rhenium and thallium,and articles of these metals, including wasteand scrap.

Beryllium:

- - Unwrought; waste and scrap; powders

- Other

- Chromium

- Germanium

- Vanadium

Other:

- Unwrought; waste and scrap; powders

- Other

81.13 8113.00 Cermets and articles thereof, includingwaste and scrap.

388

CHAPTER 82

ti

Notes.

Tools, implements , cutlery, spoons and forks,of base metal; parts thereof of base metal

1.- Apart from blow lamps, portable forges, grinding wheels with frameworks,manicure or pedicure sets, and goods of heading No. 82.09, this Chaptercovers only articles with a blade, working edge, working surface or otherworking part of

(a) Base metal;

(b) Metal carbides or cermets;

(c) Precious or semi-precious stones (natural, synthetic or reconstructed) ona support of base metal, metal carbide or cermet; or

(d) Abrasive materials on a support of base metal, provided that the articleshave cutting teeth, flutes, grooves, or the like, of base metal, whichretain their identity and function after the application of the abrasive.

2.- Parts of base metal of the articles of this Chapter are to be classified with thearticles of which they are parts, except parts separately specified as such andtool-holders for hand tools (heading No. 84.66). However, parts of generaluse as defined in Note 2 to Section XV are in all cases excluded from thisChapter.

Heads, blades and cutting plates for electric shavers or electric hairclippers are to be classified in heading No. 85.10.

3.- Sets consisting of one or more knives of heading No. 82.11 and at least anequal number of articles of heading No. 82.15 are to be classified in headingNo. 82.15.

HeadingNo.

82.01

H.S.Code

8201.10

8201.20

8201.30

8201.40

8201.50

Hand tools, the following : spades , shovels,mattocks , picks, hoes, forks and rakes;axes, bill hooks and similar hewing tools;secateurs of any kind;.scythes, sickles, hayknives, hedge shears, timber wedges andother tools of a kind used in agriculture,horticulture or forestry.

- Spades and shovels

- Forks

- Mattocks, picks, hoes and rakes

- Axes, bill hooks and similar hewing tools

- One-handed secateurs (including poultryshears)

389

HeadingNo.

82.02

82.03

82.04

H.S.Code

8201.60

8201.90

8202.10

8202.20

8202.31

8202.32

8202.40

8202.91

8202.99

8203.10

8203.20

8203.30

8203.40

8204.11

8204.12

8204.20

- Hedge shears, two-handed pruning shearsand similar two-handed shears

- Other hand tools of a kind used inagriculture, horticulture or forestry

Hand saws; blades for saws of all kinds(including slitting, slotting or toothless sawblades).

- Hand saws

- Band saw blades

- Circular saw blades (including slitting orslotting saw blades):

- - With working part of steel

- With working part of other materials

- Chain saw blades

Other saw blades:

- Straight saw blades, for working metal

- Other

Files, rasps , pliers (including cutting pliers),pincers, tweezers , metal cutting shears,pipe-cutters, bolt croppers, perforatingpunches and similar hand tools.

- Files, rasps and similar tools

- Pliers (including cutting pliers), pincers,tweezers and similar tools

- Metal cutting shears and similar tools

- Pipe-cutters, bolt croppers, perforatingpunches and similar tools

Hand-operated spanners and wrenches(including torque meter wrenches but notincluding tap wrenches); interchangeablespanner sockets, with or without handles.

- Hand-operated spanners and wrenches:

- - Non-adjustable

- - Adjustable

- Interchangeable spanner sockets, with orwithout handles

390

HeadingNo.

H.S.Code

8205.10

8205.20

8205.30

8205.40

8205.51

8205.59

8205.60

8205.70

8205.80

8205.90

8206.0082.06ti

'IV

82.07

8207.11

8207.12

8207.20

8207.30

Hand tools (including glaziers' diamonds),not elsewhere specified or included; blowlamps; vices, clamps and the like, otherthan accessories for and parts of, machinetools; anvils; portable forges; hand or pedal-operated grinding wheels with frameworks.

- Drilling, threading or tapping tools

- Hammers and sledge hammers

- Planes, chisels, gouges and similar cuttingtools for working wood

- Screwdrivers

Other hand tools (including glaziers'diamonds):

- - Household tools

- Other

Blow lamps

- Vices, clamps and the like

Anvils; portable forges; hand or pedal-operated grinding wheels withframeworks

Sets of articles of two or more of theforegoing subheadings

Tools of two or more of the headings Nos.

82.02 to 82 .05, put up in sets for retail sale.

Interchangeable tools for hand tools,

whether or not power-operated, or for

machine-tools (for example, for pressing,

stamping , punching , tapping, threading,

drilling , boring, broaching, milling, turning

or screw driving), including dies for drawing

or extruding metal, and rock drilling or

earth boring tools.

Rock drilling or earth boring tools:

With working part of sintered metal

carbide or cermets

- With working part of other material

- Dies for drawing or extruding metal

- Tools for pressing, stamping or punching

391

HeadingNo.

82.08

82.09

82.10

82.11

82.12

H.S.Code

8207.40

8207.50

8207.60

8207.70

8207.80

8207.90

8208.10

8208.20

8208.30

8208.40

8208.90

8209.00

8210.00

8211.10

8211.91

8211.92

8211.93

8211.94

- Tools for tapping or threading

- Tools for drilling, other than for rockdrilling

- Tools for boring or broaching

- Tools for milling

- Tools for turning

- Other interchangeable tools

Knives and cutting blades, for machines orfor mechanical appliances.

- For metal working

- For wood working

- For kitchen appliances or for machinesused by the food industry

- For agricultural, horticultural or forestrymachines

- Other

Plates, sticks, tips and the like for tools,unmounted, of sintered metal carbides orcermets.

Hand-operated mechanical appliances,weighing 10 kg or less, used in thepreparation , conditioning or serving of foodor drink.

Knives with cutting blades, serrated or not(including pruning knives ), other thanknives of heading No. 82.08, and bladestherefor.

- Sets of assorted articles

- Other:

- Tables knives having fixed blades

- - Other.knives having fixed blades

- - Knives having other than fixed blades

- - Blades

Razors and razor blades (including razorblade blanks in strips).

392

HeadingNo.

82.13

82.14

82.15

H.S.Code

8212.10

8212.20

82 1 2.90

82 1 3.00

8214.10

8214.20

8214.90

8215.10

8215.20

8215.91

8215.99

- Razors

- Safety razor blades, including razor bladeblanks in strips

- Other parts

Scissors, tailors' shears and similar shears,and blades therefor.

Other articles of cutlery (for example, hairclippers, butchers ' or kitchen cleavers,choppers and mincing knives, paper knives);manicure or pedicure sets and instruments(including nail files).

Paper knives, letter openers, erasingknives, pencil sharpeners and bladestherefor

Manicure or pedicure sets andinstruments ( including nail files)

Other

Spoons, forks, ladles, skimmers, cake-servers, fish-knives , butter-knives, sugartongs and similar kitchen or tableware.

- Sets of assorted articles containing atleast one article plated with preciousmetal

- Other sets of assorted articles

- Other:

Plated with precious metal

- Other

393

CHAPTER 83

Miscellaneous articles of base metal

Notes.

1.- For the purposes of this Chapter, parts of base metal are to be classifiedwith their parent articles. However , articles of iron or steel of heading No.73.12, 73.15, 73.17, 73.18 or 73. 20, or similar articles of other base metal(Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles ofthis Chapter.

2.- For the purposes of heading No. 83.02, the word "castors" means thosehaving a diameter (including, where appropriate, tyres) not exceeding 75mm, or those having a diameter (including, where appropriate, tyres)exceeding 75 mm provided that the width of the wheel or tyre fitted theretois less than 30 mm.

HeadingNo.

83.01

83.02

H. S.Code

8301.10

8301.20

8301.30

8301.40

8301.50

8301.60

8301.70

8302.10

8302.20

8302.30

Padlocks and locks (key, combination orelectrically operated ), of base metal; claspsand frames with clasps, incorporating locks,of base metal; keys for any of the foregoingarticles, of base metal.

Padlocks

Locks of a kind used for motor vehicles

Locks of a kind used for furniture

Other locks

Clasps and frames with clasps,incorporating locks

Parts

Keys presented separately

Base metal mountings , fittings and similararticles suitable for furniture, doors,staircases , windows , blinds, coachwork,saddlery , trunks , chests, caskets or the like;base metal hat-racks, hat-pegs, bracketsand similar fixtures ; castors with mountingsof base metal; automatic door closers ofbase metal.

- Hinges

- Castors

- Other mountings, fittings and similararticles suitable for motor vehicles

394

HeadingNo.

83.03

83.04

83.05

83.06

H.S.Code

8302.41

8302.42

8302.49

8302.50

8302.60

8303.00

8304.00

8305.10

8305.20

8305.90

8306.10

8306.21

8306.29

8306.30

- Other mountings, fittings and similararticles:

Suitable for buildings

- - Other, suitable for furniture

Other

- Hat-racks, hat-pegs, brackets and similarfixtures

- Automatic door closers

Armoured or reinforced safes, strong-boxesand doors and safe deposit lockers forstrong-rooms , cash or deed boxes and thelike, of base metal.

Filing cabinets, card-index cabinets, papertrays, paper rests , pen trays, office-stampstands and similar office or desk equipment,of base metal, other than office furniture ofheading No. 94.03.

Fittings for loose-leaf binders or files, letterclips, letter corners, paper clips, indexingtags and similar office articles, of basemetal; staples in strips (for example, foroffices, upholstery , packaging), of basemetal.

- Fittings for loose-leaf binders or files

- Staples in strips

- Other, including parts

Bells, gongs and the like, non-electric, ofbase metal; statuettes and other ornaments,of base metal; photograph , picture orsimilar frames , of base metal; mirrors ofbase metal.

- Bells, gongs and the like

- Statuettes and other ornaments:

Plated with precious metal

- Other

Photograph, picture or similar frames;mirrors

395

HeadingNo.

H.S.Code

83.07

83.08

8307.10

8307.90

8308.10

8308.20

8308.90

83.09

8309.10

8309.90

83.10 8310.00

83.11

8311.10

8311.20

8311.30

Flexible tubing of base metal, with orwithout fittings.

- Of iron or steel

- Of other base metal

Clasps, frames with clasps , buckles, buckle-clasps, hooks, eyes, eyelets and the like, ofbase metal, of a kind used for clothing,footwear, awnings, handbags , travel goodsor other made up articles; tubular orbifurcated rivets, of base metal; beads andspangles, of base metal.

- Hooks, eyes and eyelets

- Tubular or bifurcated rivets

- Other, including parts

Stoppers , caps and lids (including crowncorks, screw caps and pouring stoppers),capsules for bottles , threaded bungs, bungcovers, seals and other packing accessories,of base metal.

- Crown corks

- Other

Sign-plates , name-plates, address -plates andsimilar plates, numbers, letters and othersymbols, of base metal, excluding those ofheading No. 94.05.

Wire, rods, tubes, plates, electrodes andsimilar products, of base metal or of metalcarbides, coated or cored with flux material,of a kind used for soldering, brazing,welding or deposition of metal or of metalcarbides ; wire and rods, of agglomeratedbase metal powder, used for metal spraying.

- Coated electrodes of base metal, forelectric arc-welding

- Cored wire of base metal, for electric arc-welding

- Coated rods and cored wire , of basemetal, for soldering, brazing or weldingby flame

8311.90 - Other, including parts

396

SECTION XVI

Machinery and mechanical appliances;electrical equipment; parts thereof;

sound recorders and reproducers , television imageand sound recorders and reproducers, and parts

and accessories of such articles

Notes.

I.- This Section does not cover:

(a) Transmission or conveyor belts or belting, of plastics of Chapter 39, or ofvulcanised rubber (heading No. 40.10); or other articles of a kind used inmachinery or mechanical or electrical appliances or for other technical uses,of unhardened vulcanised rubber (heading No. 40.16);

(b) Articles of leather or of composition leather (heading No. 42.04) or offurskins (heading No. 43.03), of a kind used in machinery or mechanicalappliances or for other technical uses;

(c) Bobbins, spools, cops, cones, cores, reels or similar supports, of any material(for example, Chapter 39, 40, 44 or 48 Section XV);

(d) Perforated cards for Jacquard or similar machines (for example, Chapter 39or 48 or Section XV);

(e) Transmission or conveyor belts of textile material (heading No. 59.10) orother articles of textile material for technical uses (heading No. 59.11);

(f) Precious or semi-precious stones (natural, synthetic or reconstructed) ofheadings Nos. 71.02 to 71.04, or articles wholly of such stones of headingNo. 71.16, except unmounted worked sapphires and diamonds for styli(heading No. 85.22);

(g) Parts of general use, as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39);

(h) Drill pipe (heading No. 73.04);

(ij) Endless belts of metal wire or strip (Section XV);

(k) Articles of Chapter 82 or 83;

(I) Articles of Section XVII;

(m) Articles of Chapter 90;

(n) Clocks, watches or other articles of Chapter 91;

(o) Interchangeable tools of heading No. 82.07 or bushes of a kind used as partsof machines of heading No. 96.03; similar interchangeable tools are to beclassified according to the constituent material of their working part (forexample, in Chapter 40, 42, 43, 45 or 59 or heading No. 68.04 or 69.09); or

(p) Articles of Chapter 95.

2.- Subject to Note I to this Section, Note I to Chapter 84 and to Note I toChapter 85, parts of machines (not being parts of the articles of heading No.

397

84.84, 85.44, 85.45, 85.46 or 85.47) are to be classified according to thefollowing rules:

(a) Parts which are goods included in any of the headings of Chapters 84 or85 (other than headings Nos. 84.85 and 85.48) are in all cases to beclassified in their respective headings;

(b) Other parts, if suitable for use solely or principally with a particularkind of machine, or with a number of machines of the same heading(including a machine or heading No. 84.79 or 85.43) are to be classifiedwith the machines of that kind. However, parts which are equallysuitable for use principally with the goods of headings Nos. 85.17 and85.25 to 85.28 are to be classified in heading No. 85.17;

(c) All other parts are to be classified in heading No. 84.85 or 85.48.

3.- Unless the context otherwise requires, composite machines consisting oftwo or more machines fitted together to form a whole and othermachines adapted for the purpose of performing two or morecomplementary or alternative functions are to be. classified as ifconsisting only of that component or as being that machine whichperforms the principal function.

4.- Where a machine (including a combination of machines) consists ofindividual components (whether separate or interconnected by piping,by transmission devices, by electric cables or by other devices) intendedto contribute together to a clearly defined function covered by one of theheadings in Chapter 84 or Chapter 85, then the whole falls to beclassified in the heading appropriate to that function.

5.- For the purposes of these Notes, the expression "machine" means anymachine, machinery, plant, equipment, apparatus or appliance cited inthe headings of Chapter 84 or 85.

398

CHAPTER 84

Nuclear reactors, boilers, machineryand mechanical appliances; parts thereof

Notes.

1.- This Chapter does not cover:

(a) Millstones, grindstones or other articles of Chapter 68;

(b) Appliances or machinery (for example, pumps) or parts thereof, ofceramic material (Chapter 69);

(c) Laboratory glassware (heading No. 70.17); machinery, appliances orother articles for technical uses or parts thereof, of glass (heading No.70.19 or 70.20);

(d) Articles of heading No. 73.21 or 73.22 or similar articles of other basemetals (Chapters 74 to 76 or 78 to 81);

(e) Electro-mechanical tools for working in the hand, of heading No. 85.08or electro-mechanical domestic appliances of heading No. 85.09; or

(f) Hand-operated mechanical floor sweepers, not motorised (heading No.96.03).

2.- Subject to the operation of Note 3 to Section XVI, a machine or appliancewhich answers to a description in one or more of the headings Nos. 84.01 to84.24 and at the same time to a description in one or other of the headingsNos. 84.25 to 84.80 is to be classified under the appropriate heading of theformer group and not the latter.

Heading No. 84.19 does not, however, cover:

(a) Germination plant, incubators or brooders (heading No. 84.36);

(b) Grain dampening machines (heading No. 84.37);

(c) Diffusing apparatus for sugar juice extraction (heading No. 84.38),-

(d) Machinery for the heat-treatment of textile yarns, fabrics or made uptextile articles (heading No. 84.51); or

(e) Machinery or plant, designed for mechanical operation, in which achange of temperature, even if necessary, is subsidiary.

Heading No. 84.22 does not cover:

(a) Sewing machines for closing bags or similar containers (heading No.84.52); or

(b) Office machinery of heading No. 84.72.

3.- A machine-tool for working any material which answers to a description inheading No. 84.56 and at the same time to a description in heading No.84.57, 84.58, 84.59, 84.60, 84.61. 84.64 or 84.65 is to be classified in headingNo. 84.56.

399

4.- Heading No. 84 . 57 applies only to machine- tools for working metal (otherthan lathes) which can carry out different types of machining operationseither:

(a) by automatic tool change from a magazine or the like in conformitywith a machining programme (machining centres),

(b) by the automatic use, simultaneously or sequentially, of different unitheads working on a fixed position workpiece (unit constructionmachines , single station), or

(c) by the automatic transfer of the workpiece to different unit heads( multi -station transfer machines).

5.- (A) For the purposes of heading No. 84 . 71, the expression "automatic dataprocessing machines" means:

(a) Digital machines , capable of ( 1) storing the processing program orprograms and at least the data immediately necessary for theexecution of the program ; (2) being freely programmed in accor-dance with the requirements of the user ; ( 3) performing arithmeticalcomputations specified by the user; and, (4 ) executing , withouthuman intervention, a processing program which requires them tomodify their execution , by logical decision during the processingrun;

(b) Analogue machines capable of simulating mathematical models andcomprising at least : analogue elements , control elements andprogramming elements;

(c) Hybrid machines consisting of either a digital machine withanalogue elements or an analogue machine with digital elements.

(B) Automatic data processing machines may be in the form of systemsconsisting of a variable number of separately - housed units . A unit is tobe regarded as being a part of the complete system if it meets all thefollowing conditions:

(a) it is connectable to the central processing unit either directly orthrough one or more other units;

(b) it is specifically designed as part of such a system ( it must, inparticular , unless it is a power supply unit, be able to accept ordeliver data in a form ( code or signals) which can be used by thesystem).

Such units presented separately are also to be classified inheading No. 84.71.

Heading No. 84.71 does not cover machines incorporating or workingin conjunction with an automatic data processing machine and performinga specified function . Such machines are classified in the headingsappropriate to their respective functions or. failing that, in residualheadings.

6.- Heading No. 84.82 applies, inter alia , to polished steel balls, the maximumand minimum diameters of which do not differ from the nominal diameter

400

by more than 1% or by more than 0.05 mm, whichever is less . Other steelballs are to be classified in heading No. 73.26.

7.- A machine which is used for more than one purpose is, for the purposes ofclassification, to be treated as if its principal purpose were its sole purpose.

Subject to Note 2 to this Chapter and Note 3 to Section XVI, amachine the principal purpose of which is not described in any heading orfor which no one purpose is the principal purpose is, unless the contextotherwise requires, to be classified in heading No. 84.79. Heading No. 84.79also covers machines for making rope or cable (for example, stranding,twisting or cabling machines) from metal wire, textile yarn or any othermaterial or from a combination of such materials.

Subheading Note.

I.- Subheading No. 8482.40 applies only to bearings with cylindrical rollers ofa uniform diameter not exceeding 5 mm and having a length which is atleast three times the diameter. The ends of the rollers may be rounded.

HeadingNo.

84.01

84.02

186137 2C

H.S.Code

8401.10

8401.20

8401.30

8401.40

8402.11

8402.12

8402.19

8402.20

8402.90

Nuclear reactors ; fuel elements (cartridges),non-irradiated , for nuclear reactors;machinery and apparatus for isotopicseparation.

- Nuclear reactors

- Machinery and apparatus for isotopicseparation, and parts thereof

- Fuel elements (cartridges), non-irradiated

- Parts of nuclear reactors

Steam or other vapour generating boilers(other than central heating hot waterboilers capable also of producing lowpressure steam ); super-heated water boilers.

Steam or other vapour generating boilers:

Watertube boilers with a steamproduction exceeding 45 t per hour

Watertube boilers with a steamproduction not exceeding 45 t per hour

'Other vapour generating boilers,including hybrid boilers

Super-heated water boilers

- Parts

401

HeadingNo.

84.03

84.04

84.05

84.06

84.07

H.S.Code

8403.10

8403.90

8404.10

8404.20

8404.90

8405.10

8405.90

8406.11

8406.19

8406.90

8407.10

8407.21

Central heating boilers other than those ofheading No. 84.02.

- Boilers

- Parts

Auxiliary plant for use with boilers ofheading No. 84.02 or 84.03 (for example,economisers, super-heaters, soot removers,.gas recoverers ); condensers for steam orother vapour power units.

- Auxiliary plant for use with boilers ofheading No. 84.02 or 84.03

- Condensers for steam or other vapourpower units

- Parts

Producer gas or water gas generators, withor without their purifiers; acetylene gasgenerators and similar water process gasgenerators , with or without their purifiers.

- Producer gas or water gas generators,with or without their purifiers; acetylenegas generators and similar water processgas generators, with or without theirpurifiers

- Parts

Steam turbines and other vapour turbines.

Turbines:

For marine propulsion

Other

Parts

Spark-ignition reciprocating or rotaryinternal combustion piston engines.

- Aircraft engines

- Marine propulsion engines:

- - Outboard motors

402

HeadingNo.

84.08

84.09

84.10

H.S.Code

8407.29

8407.31

8407.32

8407.33

8407.34

8407.90

8408.10

8408.20

8408.90

8409.10

8409.91

8409.99

8410.11

8410.12

8410.13

-- Other

Reciprocating piston engines of a kindused for the propulsion of vehicles ofChapter 87:

- - Of a cylinder capacity not exceeding50 cc

- Of a cylinder capacity exceeding 50 ccbut not exceeding 250 cc

- Of a cylinder capacity exceeding 250 ccbut not exceeding 1,000 cc

- Of a cylinder capacity exceeding1,000 cc

- Other engines

Compression-ignition internal combustionpiston engines (diesel or semi -dieselengines).

- Marine propulsion engines

- Engines of a kind used for the propulsionof vehicles of Chapter 87

- Other engines

Parts suitable for use solely or principallywith the engines of heading No. 84.07 or84.08.

- For aircraft engines

- Other:

Suitable for use solely or principallywith spark- ignition internal combustionpiston engines

Other

Hydraulic turbines, water wheels, andregulators therefor.

Hydraulic turbines and water wheels:

Of a power not exceeding 1.000 kW

- Of a power exceeding 1,000 kW but notexceeding 10.000 kW

Of a power exceeding 10.000 kW

403186137 2C2

HeadingNo.

84.11

84.12

84.13

H.S.Code

8410.90

8411.11

8411.12

8411.21

8411.22

8411.81

8411.82

8411.91

8411.99

8412.10

8412.21

8412.29

8412.31

8412.39

8412.80

8412.90

8413.11

8413.19

- Parts, including regulators

Turbo-jets, turbo-propellers and other gasturbines.

- Turbojets:

Of a thrust not exceeding 25 kN

Of a thrust exceeding 25 kN

- Turbo-propellers:

- - Of a power not exceeding 1,100 kW

Of a power exceeding 1,100 kW

Other gas turbines:

- Of a power not exceeding 5,000 kW

- - Of a power exceeding 5,000 kW

Parts:

- - Of turbo-jets or turbo-propellers

- Other

Other engines and motors.

- Reaction engines other than turbojets

- Hydraulic power engines and motors:

Linear acting (cylinders)

- Other

- Pneumatic power engines and motors:

- Linear acting (cylinders)

Other

- Other

- Parts

Pumps for liquids, whether or not fittedwith a measuring device ; liquid elevators.

Pumps fitted or designed to be fitted witha measuring device:

Pumps for dispensing fuel or lubricants,of the type used in filling-stations or ingarages

- - Other

404

HeadingNo.

84.14

H.S.Code

8413.20

8413.30

8413.40

8413.50

8413.60

8413.70

8413.81

8413.82

8413.91

8413.92

8414.10

8414.20

8414.30

8414.40

8414.51

8414.59

8414.60

8414.80

8414.90

- Hand pumps, other than those ofsubheading No. 8413.11 or 8413.19

- Fuel, lubricating or cooling mediumpumps for internal combustion pistonengines

- Concrete pumps

- Other reciprocating positive displacementpumps

- Other rotary positive displacement pumps

- Other centrifugal pumps

- Other pumps; liquid elevators:

- - Pumps

- - Liquid elevators

- Parts:

- - Of pumps

- - Of liquid elevators

Air of vacuum pumps, air or other gascompressors and fans; ventilating orrecycling hoods incorporating a fan,whether or not fitted with filters.

- Vacuum pumps

- Hand- or foot-operated air pumps

- Compressors of a kind used inrefrigerating equipment

- Air compressors mounted on a wheeledchassis for towing

- Fans:

Table, floor, wall, window, ceiling orroof fans, with a self-contained electricmotor of an output not exceeding125 W

- - Other

Hoods having a maximum horizontal sidenot exceeding 120 cm

Other

Parts

405

HeadingNo.

84.15

84.16

84.17

84.18

H.S.Code

8415.10

8415.81

8415.82

8415.83

8415.90

8416.10

8416.20

8416.30

8416.90

8417.10

8417.20

8417.80

8417.90

Air conditioning machines, comprising amotor-driven fan and elements for changingthe temperature and humidity , includingthose machines in which the humiditycannot be separately regulated.

- Window or wall types, self-contained

- Other:

- - Incorporating a refrigerating unit and avalve for reversal of the cooling/heatcycle

- - Other, incorporating a refrigerating unit

- - Not incorporating a refrigerating unit

- Parts

Furnace burners for liquid fuel, forpulverised solid fuel or for gas; mechanicalstokers, mechanical grates, mechanical ashdischargers and similar appliances.

Furnace burners for liquid fuel

Other furnace burners, includingcombination burners

Mechanical stokers, mechanical grates,mechanical ash dischargers and similarappliances

Parts

Industrial or laboratory furnaces and ovens,including incinerators, non-electric.

- Furnaces and ovens for the roasting,melting or other heat-treatment of ores,pyrites or of metals

- Bakery ovens, including biscuit ovens

Other

- Parts

Refrigerators, freezers and otherrefrigerating or freezing equipment, electricor other; heat pumps other than airconditioning machines of heading No. 84.15.

406

HeadingNo.

84.19

H.S.Code

8418.10

8418.21

8418.22

8418.29

8418.30

8418.40

8418.50

8418.61

8418.69

8418.91

8418.99

8419.11

8419.19

8419.20

- Combined refrigerator-freezers, fittedwith separate external doors

- Refrigerators, household type:

- - Compression-type

- - Absorption-type, electrical

- - Other

- Freezers of the chest type, not exceeding800 1 capacity

- Freezers of the upright type, notexceeding 900 1 capacity

- Refrigerating or freezing display counters,cabinets, show-cases and the like

- Other refrigerating or freezing equipment;heat pumps:

- - Compression type units whosecondensers are heat exchangers

- - Other

- Parts:

- - Furniture designed to receiverefrigerating or freezing equipment

- - Other

Machinery, plant or laboratory equipment,whether or not electrically heated, for thetreatment of materials by a processinvolving a change of temperature such asheating , cooking, roasting, distilling,rectifying, sterilising , pasteurising,steaming , drying, evaporating, vaporising,condensing or cooling , other thanmachinery or plant of a kind used fordomestic purposes ; instantaneous or storagewater heaters, non-electric.

- Instantaneous or storage water heaters,non-electric:

- - Instantaneous gas water heaters

- - Other

- Medical, surgical or laboratory sterilisers

- Dryers:

407

HeadingNo.

84.20

84.21

H.S.Code

8419.31

8419.32

8419.39

8419.40

8419.50

8419.60

8419.81

8419.89

8419.90

8420.10

8420.91 -

8420.99

8421.11

8421.12

8421.19

8421.21

8421.22

8421.23

8421.29

- - For agricultural products

- - For wood, paper pulp, paper orpaperboard

- - Other

- Distilling or rectifying plant

- Heat exchange units

- Machinery for liquefying air or gas

- Other machinery, plant and equipment:

- - For making hot drinks or for cooking orheating food

- - Other

- Parts

Calendering or other rolling machines,other than for metals or glass, andcylinders therefor.

- Calendering or other rolling machines

- Parts:

- - Cylinders

- - Other

Centrifuges , including centrifugal dryers;filtering or purifying machinery andapparatus, for liquids or gases.

- Centrifuges, including centrifugal dryers:

- - Cream separators

- - Clothes-dryers

- - Other

- Filtering or purifying machinery andapparatus for liquids:

- - For filtering or purifying water

- - For filtering or purifying beveragesother than water

- - Oil or petrol-filters for internalcombustion engines

- - Other

- Filtering or purifying machinery andapparatus for gases:

408

_i

HeadingNo.

84.22

84.23

H. S.Code

8421.31

8421.39

8421.91

8421.99

8422.11

8422.19

8422.20

8422.30

8422.40

8422.90

8423.10

8423.20

8423.30

- - Intake air filters for internal combustionengines

- - Other

- Parts:

- - Of centrifuges, including centrifugaldryers

-- Other

Dish washing machines; machinery forcleaning or drying bottles or othercontainers; machinery for filling , closing,sealing, capsuling or labelling bottles, cans,boxes, bags or other containers; otherpacking or wrapping machinery ; machineryfor aerating beverages.

- Dish washing machines:

- - Of the household type

- - Other

- Machinery for cleaning or drying bottlesor other containers

- Machinery for filling, closing, sealing,capsuling or labelling bottles, cans, boxes,bags or other containers; machinery foraerating beverages

- Other packing or wrapping machinery

- Parts

Weighing machinery (excluding balances ofa sensitivity of 5 cg or better), includingweight operated counting or checkingmachines ; weighing machine weights of allkinds.

- Personal weighing machines, includingbaby scales; household scales

- Scales for continuous weighing of goodson conveyors

- Constant weight scales and scales fordischarging a predetermined weight ofmaterial into a bag or container,including hopper scales

- Other weighing machinery:

409

I-

HeadingNo.

84.24

84.25

H.S.Code

8423.81

8423.82

8423.89

8423.90

8424.10

8424.20

8424.30

8424.81

8424.89

8424.90

8425.11

8425.19

8425.20

8425.31

8425.39

- - Having a maximum weighing capacitynot exceeding 30 kg

- - Having a maximum weighing capacityexceeding 30 kg but not exceeding 5,000kg

- - Other

- Weighing machine weights of all kinds;parts of weighing machinery

Mechanical appliances (whether or nothand-operated) for projecting, dispersing orspraying liquids or powders; fireextinguishers, whether or not charged;spray guns and similar appliances; steam orsand blasting machines and similar jetprojecting machines.

- Fire extinguishers, whether or notcharged

- Spray guns and similar appliances

- Steam or sand blasting machines andsimilar jet projecting machines

- Other appliances:

- - Agricultural or horticultural

- - Other

- Parts

Pulley tackle and hoists other than skiphoists; winches and capstans; jacks.

- Pulley tackle and hoists other than skiphoists or hoists of a kind used for raisingvehicles:

- - Powered by electric motor

- - Other.

- Pit-head winding gear; winches speciallydesigned for use underground

- Other winches; capstans:

- - Powered by electric motor

- - Other

- Jacks; hoists of a kind used for raisingvehicles:

410

HeadingNo.

84.26

84.27

84.28

H.S.Code

8425.41

8425.42

8425.49

8426.11

8426.12

8426.19

8426.20

8426.30

8426.41

8426.49

8426.91

8426.99

8427.10

8427.20

8427.90

8428.10

- - Built-in jacking systems of a type usedin garages

- - Other jacks and hoists, hydraulic

- Other

Derricks; cranes, including cable cranes;mobile lifting frames, straddle carriers andworks trucks fitted with a crane.

- Overhead travelling cranes, transportercranes, gantry cranes, bridge cranes,mobile lifting frames and straddlecarriers:

Overhead travelling cranes on fixedsupport

- - Mobile lifting frames on tyres andstraddle carriers

- Other

- Tower cranes

- Portal or pedestal jib cranes

- Other machinery, self-propelled:

- - On tyres

- - Other

- Other machinery:

- - Designed for mounting on road vehicles

- - Other

Fork-lift trucks; other works trucks fittedwith lifting or handling equipment.

- Self-propelled trucks powered by anelectric motor

- Other self-propelled trucks

- Other trucks

Other lifting , handling , loading or unloading

machinery (for example, lifts, escalators,conveyors, teleferics).

- Lifts and skip hoists

411

HeadingNo.

84.29

84.30

H.S.Code

8428.20

8428.31

8428.32

8428.33

8428.39

8428.40

8428.50

8428.60

8428.90

8429.11

8429.19

8429.20

8429.30

8429.40

8429.51

8429.52

8429.59

- Pneumatic elevators and conveyors

- Other continuous-action elevators andconveyors, for goods or materials:

- - Specially designed for underground use

- - Other, bucket type

- - Other, belt type

- - Other

- Escalators and moving walkways

- Mine wagon pushers, locomotive orwagon traversers, wagon tippers andsimilar railway wagon handlingequipment

- Teleferics, chair-lifts, ski-draglines;traction mechanisms for funiculars

- Other machinery

Self-propelled bulldozers, angledozers,graders, levellers, scrapers, mechanicalshovels, excavators, shovel loaders, tampingmachines and road rollers.

- Bulldozers and angledozers:

- - Track laying

- - Other

- Graders and levellers

- Scrapers

- Tamping machines and road rollers

- Mechanical shovels, excavators andshovel loaders:

- - Front-end shovel loaders

- - Machinery with a 360° revolvingsuperstructure

- - Other

Other moving, grading, levelling, scraping,excavating, tamping, compacting, extractingor boring machinery, for earth, minerals orores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers.

412

..1

HeadingNo.

84.31

84.32

H.S.Code

8430.10

8430.20

8430.31

8430.39

8430.41

8430.49

8430.50

8430.61

8430.62

8430.69

8431.10

8431.20

8431.31

8431.39

8431.41

8431.42

8431.43

8431.49

8432.10

- Pile-drivers and pile-extractors

- Snow-ploughs and snow-blowers

- Coal or rock cutters and tunnellingmachinery:

- - Self-propelled

Other

Other boring or sinking machinery:

Self-propelled

Other

Other machinery, self-propelled

Other machinery, not self-propelled:

- Tamping or compacting machinery

- Scrapers

- Other

Parts suitable for use solely or principallywith the machinery of headings Nos. 84.25to 84.30.

- Of machinery of heading No. 84.25

- Of machinery of heading No. 84.27

- Of machinery of heading No. 84.28:

Of lifts, skip hoists or escalators

- - Other

Of machinery of heading No. 84.26, 84.29or 84.30:

- Buckets, shovels, grabs and grips

Bulldozer or angledozer blades

- Parts of boring or sinking machinery ofsubheading No. 8430.41 or 8430.49

- - Other

Agricultural , horticultural or forestrymachinery for soil preparation orcultivation ; lawn or sports-ground rollers.

- Ploughs

- Harrows, scarifiers, cultivators, weedersand hoes:

413

HeadingNo.

84.33

H. S.Code

8432.21

8432.29

8432.30

8432.40

8432.80

8432.90

8433.11

8433.19

8433.20

8433.30

8433.40

8433.51

8433.52

8433.53

8433.59

8433.60

8433.90

Disc harrows

- Other

- Seeders, planters and transplanters

Manure spreaders and fertiliserdistributors

Other machinery

Parts

Harvesting or threshing machinery,including straw or fodder balers; grass orhay mowers; machines for cleaning , sortingor grading eggs, fruit or other agriculturalproduce , other than machinery of headingNo. 84.37.

Mowers for lawns, parks orsportsgrounds:

Powered, with the cutting devicerotating in a horizontal plane

Other

- Other mowers, including cutter bars fortractor mounting

- Other haymaking machinery

- Straw or fodder balers, including pick-upbalers

- Other harvesting machinery: threshingmachinery:

Combine harvester-threshers

- Other threshing machinery

- Root or tuber harvesting machines

Other

- Machines for cleaning, sorting or gradingeggs, fruit or other agricultural produce

Parts

84.34 Milking machines and dairy machinery.

8434.10 - Milking machines

8434.20 - Dairy machinery

8434.90 - Parts

414

HeadingNo.

84.35

84.36

W

84.37

84.38

H.S.Code

8435.10

8435.90

8436.10

8436.21

8436.29

8436.80

8436.91

8436.99

8437.10

8437.80

8437.90

Presses, crushers and similar machineryused in the manufacture of wine, cider, fruitjuices or similar beverages.

- Machinery

- Parts

Other agricultural , horticultural , forestry,poultry-keeping or bee-keeping machinery,including germination plant fitted withmechanical or thermal equipment ; poultryincubators and brooders.

- Machinery for preparing animal feedingstuffs

Poultry-keeping machinery; poultryincubators and brooders:

- Poultry incubators and brooders

- Other

Other machinery

Parts:

- Of poultry-keeping machinery orpoultry incubators and brooders

Other

Machines for cleaning , sorting or gradingseed , grain or dried leguminous vegetables;machinery used in the milling industry orfor the working of cereals or driedleguminous vegetables, other than farm-typemachinery.

- Machines for cleaning, sorting or gradingseed, grain or dried leguminousvegetables

- Other machinery

- Parts

Machinery, not specified or includedelsewhere in this Chapter, for the industrialpreparation or manufacture of food ordrink, other than machinery for theextraction or preparation of animal or fixedvegetable fats or oils.

415

HeadingNo.

84.39

84.40

84.41

H.S.Code

8438.10

8438.20

8438.30

8438.40

843 8.50

8438.60

8438.80

8438.90

8439.10

8439.20

8439.30

8439.91

8439.99

8440.10

8440.90

8441.10

8441.20

Bakery machinery and machinery for themanufacture of macaroni, spaghetti or

similar products

Machinery for the manufacture ofconfectionery, cocoa or chocolate

Machinery for sugar manufacture

Brewery machinery

Machinery for the preparation of meat orpoultry

Machinery for the preparation of fruits,nuts or vegetables

Other machinery

Parts

Machinery for making pulp of fibrouscellulosic material or for making orfinishing paper or paperboard.

- Machinery for making pulp of fibrouscellulosic material

- Machinery for making paper orpaperboard

- Machinery for finishing paper orpaperboard

- Parts:

Of machinery for making pulp offibrous cellulosic material

- - Other

Book-binding machinery, including book-sewing machines.

- Machinery

- Parts

Other machinery for making up paper pulp,paper or paperboard, including cuttingmachines of all kinds.

- Cutting machines

- Machines for making bags, sacks orenvelopes

416

HeadingNo.

84.42

84.43

H.S.Code

8441.30

8441.40

8441.80

8441.90

8442.10

8442.20

8442.30

8442.40

8442.50

8443.11

8443.12

8443.19

- Machines for making cartons, boxes,cases, tubes, drums or similar containers,other than by moulding

- Machines for moulding articles in paperpulp, paper or paperboard

- Other machinery

- Parts

Machinery, apparatus and equipment (otherthan the machine-tools of headings Nos.84.56 to 84.65), for type-founding or type-setting , for preparing or making printingblocks, plates, cylinders or other printingcomponents ; printing type, blocks, plates,cylinders and other printing components;blocks, plates, cylinders and lithographicstones, prepared for printing purposes (forexample, planed, grained or polished).

Phototype-setting and composingmachines

Machinery, apparatus and equipment fortype-setting or composing by otherprocesses, with or without foundingdevice

Other machinery, apparatus andequipment

Parts of the foregoing machinery,apparatus or equipment

Printing type, blocks, plates, cylindersand other printing components; blocks,plates, cylinders and lithographic stones,prepared for printing purposes (forexample, planed, grained or polished)

Printing machinery ; machines for usesancillary to printing.

Offset printing machinery:

- Reel fed

- Sheet fed, office type (sheet size notexceeding 22 x 36 cm)

- Other

Letterpress printing machinery, excludingflexographic printing:

417186137 2D

HeadingNo.

84.44

84.45

84.46

H.S.Code

8443.21

8443.29

8443.30

8443.40

8443.50

8443.60

8443.90

8444.00

8445.11-

8445.12

8445.13

8445.19

8445.20

8445.30

8445.40

8445.90

8446.10

8446.21

8446.29

8446.30

- - Reel fed

- - Other

Flexographic printing machinery

Gravure printing machinery

Other printing machinery

Machines for uses ancillary to printing

Parts

Machines for extruding, drawing, texturingor cutting man-made textile materials.

Machines for preparing textile fibres;spinning, doubting or twisting machines andother machinery for producing textile yarns;textile reeling or winding (including weft-winding ) machines and machines forpreparing textile yarns for use on themachines of heading No. 84.46 or 84.47.

- Machines for preparing textile fibres:

- - Carding machines -

Combing machines

- - Drawing or roving machines

- Other

- Textile spinning machines

- Textile doubling or twisting machines

- Textile winding (including weft-winding)or reeling machines

- Other

Weaving machines (looms).

For weaving fabrics of a width notexceeding 30 cm

- For weaving fabrics of a width exceeding30 cm, shuttle type:

- - Power looms

- - Other

- For weaving fabrics of a width exceeding30 cm, shuttleless type

418

HeadingNo.

84.47

84.48

H.S.Code

8447.11

8447.12

8447.20

8447.90

8448.11

8448.19

8448.20

8448.31

8448.32

8448.33

8448.39

Knitting machines , stitch-bonding machinesand machines for making gimped yarn,tulle, lace, embroidery, trimmings, braid ornet and machines for tufting.

- Circular knitting machines:

- - With cylinder diameter not exceeding165 mm

- With cylinder diameter exceeding 165mm

- Flat knitting machines; stitch-bondingmachines

- Other

Auxiliary machinery for use with machinesof heading No. 84.44, 84.45, 84.46 or 84.47(for example, dobbies, Jacquards , automaticstop motions, shuttle changing mechanisms);parts and accessories suitable for use solelyor principally with the machines of thisheading or of heading No. 84..44, 84.45,84.46 or 84.47 (for example, spindles andspindle flyers, card clothing, combs,extruding nipples, shuttles, healds andheald-frames, hosiery needles).

Auxiliary machinery for machines ofheading No. 84.44, 84.45, 84.46 or 84.47:

- - Dobbies and Jacquards; card reducing,copying, punching or assemblingmachines for use therewith

- - Other

- Parts and accessories of machines ofheading No. 84.44 or of their auxiliarymachinery

- Parts and accessories of machines ofheading No. 84.45 or of their auxiliarymachinery:

Card clothing

- Of machines for preparing textile fibres,other than card clothing

- - Spindles, spindle flyers, spinning ringsand.ring travellers

- - Other

419186137 2D2

HeadingNo.

84.49

84.50

84.51

H.S.Code

8448.41

8448.42

8448.49

8448.51

8448.59

8449.00

8450.11

8450.12

8450.19

8450.20

8450.90

Parts and accessories of weavingmachines (looms) or of their auxiliarymachinery:

- - Shuttles

Reeds for looms, healds and heald-frames

Other

Parts and accessories of machines ofheading No. 84.47 or of their auxiliarymachinery:

Sinkers, needles and other articles usedin forming stitches

- Other

Machinery for the manufacture or finishingof felt or nonwovens in the piece or inshapes, including machinery for making felthats; blocks for making hats.

Household or laundry-type washingmachines , including machines which bothwash and dry.

Machines, each of a dry linen capacitynot exceeding 10 kg:

Fully-automatic machines

- Other machines, with built-incentrifugal drier

Other

- Machines , each of a dry linen capacityexceeding 10 kg

- Parts

Machinery (other than machines of headingNo. 84.50) for washing, cleaning, wringing,drying, ironing , pressing (including fusingpresses ), bleaching , dyeing , dressing,finishing,'coating or impregnating textileyarns, fabrics or made up textile articlesand machines for applying the paste to thebase fabric or other support used in themanufacture of floor coverings such aslinoleum ; machines for reeling , unreeling,folding, cutting or pinking textile fabrics.

420

HeadingNo.

84.52

84.53

H.S.Code

8451.10

8451.21

8451.29

8451.30

8451.40

8451.50

8451.80

8451.90

8452.10

8452.21

8452.29

8452.30

8452.40

8452.90

8453.10

8453.20

8453.80

8453.90

- Dry-cleaning machines

- Drying machines:

- - Each of a dry linen capacity notexceeding 10 kg

- - Other

Ironing machines and presses (includingfusing presses)

- Washing, bleaching or dyeing machines

- Machines for reeling, unreeling, folding,cutting or pinking textile fabrics

- Other machinery

- Parts

Sewing machines, other than book-sewingmachines of heading No. 84.40; furniture,bases and covers specially designed forsewing machines; sewing machine needles.

- Sewing machines of the household type

- Other sewing machines:

- - Automatic units

- - Other

- Sewing machine needles

- Furniture, bases and covers for sewingmachines and parts thereof

- Other parts of sewing machines

Machinery for preparing, tanning orworking hides, skins or leather or formaking or repairing footwear or otherarticles of hides, skins or leather, otherthan sewing machines.

- Machinery for preparing, tanning orworking hides, skins or leather

- Machinery for making or repairingfootwear

- Other machinery

- Parts

421

HeadingNo.

84.54

84.55

84.56

84.57

84.58

H.S.Code

8454.10

8454.20

8454.30

8454.90

8455.10

8455.21

8455.22

8455.30

8455.90

8456.10

8456.20

8456.30

8456.90

8457.10

8457.20

8457.30

8458.11

Converters, ladles, ingot moulds and castingmachines, of a kind used in metallurgy or inmetal foundries.

- Converters

- Ingot moulds and ladles

- Casting machines

- Parts

Metal-rolling mills and rolls therefor.

- Tube mills .

- Other rolling mills:

- - Hot or combination hot and cold

- - Cold

Rolls for rolling mills

- Other parts

Machine-tools for working any material byremoval of material, by laser or other lightor photon beam, ultrasonic, electro-discharge, electro-chemical, electron beam,ionic-beam or plasma are processes.

- Operated by laser or other light orphoton beam processes

- Operated by ultrasonic processes

- Operated by electro-discharge processes

- Other

Machining centres, unit constructionmachines (single station) and multi-stationtransfer machines, for working metal.

- Machining centres

- Unit construction machines (singlestation)

- Multi-station transfer machines

Lathes for removing metal.

- Horizontal lathes:

- - Numerically controlled

422

HeadingNo.

84.59

84.60

H.S.Code

8458.19

8458.91

8458.99

8459.10

8459.21

8459.29

8459.31

8459.39

8459.40

8459.51

8459.59

8459.61

8459.69

8459.70

8460.11

8460.19

- - Other

- Other lathes:

- - Numerically controlled

- - Other

Machine-tools (including way-type unit

head machines) for drilling, boring, milling,threading or tapping by removing metal,

other than lathes of heading No. 84.58.

- Way-type unit head machines

- Other drilling machines:

- - Numerically controlled

- - Other

- Other boring-milling machines:

- - Numerically controlled

- - Other

- Other boring machines

- Milling machines, knee-type:

- - Numerically controlled

- - Other

- Other milling machines:

- - Numerically controlled

- - Other

- Other threading or tapping machines

.Machine-tools for deburring, sharpening,

grinding, honing, lapping, polishing or

otherwise finishing metal, sintered metal

carbides or cermets by means of grinding

stones, abrasives or polishing products,other than gear cutting, gear grinding or

gear finishing machines of heading No.

84.61.

- Flat-surface grinding machines, in whichthe positioning in any one axis can be setup to an accuracy of at least 0.01 mm:

- - Numerically controlled

- - Other

423

HeadingNo.

84.61

84.62

H.S.Code

8460.21

8460.29

8460.31

8460.39

8460.40

8460.90

8461.10

8461.20

8461.30

8461.40

8461.50

8461.90

8462.10

8462.21

8462.29

- Other grinding machines, in which thepositioning in any one axis can be set upto an accuracy of at least 0.01 mm:

- Numerically controlled

- - Other

- Sharpening (tool or cutter grinding)machines:

- - Numerically controlled

- - Other

Honing or lapping machines

- Other

Machine-tools for planing, shaping, slotting,broaching, gear cutting, gear grinding orgear finishing, sawing, cutting-off and othermachine-tools working by removing metal,sintered metal carbides or cermets, notelsewhere specified or included.

- Planing machines

- Shaping or slotting machines

- Broaching machines

- Gear cutting, gear grinding or gearfinishing machines

- Sawing or cutting-off machines

- Other

Machine-tools (including presses) forworking metal by forging, hammering ordie-stamping; machine-tools (includingpresses) for working metal by bending,folding, straightening , flattening, shearing,punching or notching; presses for workingmetal or metal carbides, not specifiedabove.

- Forging or die-stamping machines(including presses) and hammers

- Bending , folding, straightening orflattening machines (including presses):

- - Numerically controlled

- - Other

424

HeadingNo.

84.63

84.64

84.65

H.S.Code

8462.31

8462.39

8462.41

8462.49

8462.91

8462.99

8463.10

8463.20

8463.30

8463.90

8464.10

8464.20

8464.90

8465.10

- Shearing machines (including presses),other than combined punching andshearing machines:

- - Numerically controlled

- - Other

- Punching or notching machines(including presses), including combinedpunching and shearing machines:

- - Numerically controlled

- - Other

Other:

- - Hydraulic presses

- - Other

Other machine-tools for working metal,sintered metal carbides or cermets, withoutremoving material.

- Draw-benches for bars, tubes, profiles,wire or the like

- Thread rolling machines

- Machines for working wire

- Other

Machine-tools for working stone, ceramics,concrete, asbestos-cement or like mineralmaterials or for cold working glass.

- Sawing machines

- Grinding or polishing machines

- Other

Machine-tools (including machines fornailing , stapling , glueing or otherwiseassembling) for working wood, cork, bone,hard rubber, hard plastics or similar hardmaterials.

- Machines which can carry out differenttypes of machining operations withouttool change between such operations

- Other:

425

HeadingNo.

84.66

84.67

H.S.Code

8465.91

8465.92

8465.93

8465.94

8465.95

8465.96

8465.99

8466.10

8466.20

8466.30

8466.91

8466.92

8466.93

8466.94

8467.11

8467.19

8467.81

8467.89

- - Sawing machines

- Planing, milling or moulding (bycutting) machines

- - Grinding, sanding or polishing machines

- - Bending or assembling machines

- - Drilling or morticing machines

- - Splitting, slicing or paring machines

- - Other

Parts and accessories suitable for use solelyor principally with the machines of headingsNos. 84.56 to 84.65, including work or toolholders, self-opening dieheads, dividingheads and other special attachments formachine-tools; tool holders for any type oftool for working in the hand.

- Tool holders and self-opening dieheads

- Work holders

- Dividing heads and other specialattachments for machine-tools

- Other:

- - For machines of heading No. 84.64

- - For machines of heading No. 84.65

- - For machines of headings Nos. 84.56 to84.61

- - For machines of heading No. 84.62 or84.63

Tools for working in the hand, pneumaticor with self-contained non-electric motor.

- Pneumatic:

- - Rotary type (including combined rotary-percussion)

- - Other

- Other tools:

- - Chain saws

- - Other

- Parts:

426

HeadingNo.

84.68

84.69

84.70

H.S.Code

8467.91

8467.92

8467.99

8468.10

8468.20

8468.80

8468.90

8469.10

8469.21

8469.29

8469.31

8469.39

8470.10

8470.21

8470.29

8470.30

- - Of chain saws

- - Of pneumatic tools

- - Other

Machinery and apparatus for soldering,

brazing or welding, whether or not capable

of cutting, other than those of heading No.

85.15 ; gas-operated surface tempering

machines and appliances.

- Hand-held blow pipes

- Other gas-operated machinery and

apparatus

- Other machinery and apparatus

- Parts

Typewriters and word-processing machines.

- Automatic typewriters and word-processing machines

- Other typewriters, electric:

- Weighing not more than 12 kg,excluding case

- Other

- Other typewriters, non-electric:

- Weighing not more than 12 kg,excluding case

- - Other

Calculating machines; accounting machines,cash registers, postage-franking machines,ticket-issuing machines and similarmachines, incorporating a calculatingdevice.

- Electronic calculators capable ofoperation without an external source ofpower

- Other electronic calculating machines:

-- Incorporating a printing device

- - Other

- Other calculating machines

427

HeadingNo.

84.71

84.72

H.S.Code

8470.40

8470.50

8470.90

8471.10

8471.20

8471.91

8471.92

8471.93

8471.99

8472:10

8472.20

- Accounting machines

- Cash registers

- Other

Automatic data processing machines andunits thereof; magnetic or optical readers,machines for transcribing data onto datamedia in coded form and machines forprocessing such data, not elsewherespecified or included.

- Analogue or hybrid automatic dataprocessing machines

- Digital automatic data processingmachines, containing in the same housingat least a central processing unit and aninput and output unit, whether or notcombined

Other:

Digital processing units , whether or notpresented with the rest of a system,which may contain in the same housingone or two of the following types ofunit : storage units, input units, outputunits

Input or output units, whether or notpresented with the rest of a system andwhether or not containing storage unitsin the same housing

Storage units , whether or not presentedwith the rest of a system

Other

Other office machines (for example,hectograph or stencil duplicating machines,addressing machines, automatic banknotedispensers, coin-sorting machines, coin-counting or wrapping machines, pencil-sharpening machines, perforating orstapling machines).

- Duplicating machines

- Addressing machines and address plateembossing machines

428

HeadingNo.

84.73

84.74

H.S.Code

8472.30

8472.90

8473.10

8473.21

8473.29

8473.30

8473.40

8474.10

1 8474.20

8474.31

8474.32

Machines for sorting or folding mail orfor inserting mail in envelopes or bands,machines for opening, closing or sealingmail and machines for affixing orcancelling postage stamps

Other

Parts and accessories (other than covers,carrying cases and the like) suitable for usesolely or principally with machines ofheadings Nos. 84.69 to 84.72.

- Parts and accessories of the machines ofheading No. 84.69

- Parts and accessories of the machines ofheading No. 84.70:

- - Of the electronic calculating machinesof subheading No. 8470.10, 8470.21 or8470.29

- - Other

- Parts and accessories of the machines ofheading No. 84.71

- Parts and accessories of the machines ofheading No. 84.72

Machinery for sorting, screening,separating , washing , crushing , grinding,mixing or kneading earth , stone, ores orother mineral substances, in solid (includingpowder or paste ) form ; machinery foragglomerating , shaping or moulding solidmineral fuels, ceramic paste , unhardenedcements, plastering materials or othermineral products in powder or paste form;machines for forming foundry moulds ofsand.

Sorting, screening. separating or washingmachines

- Crushing or grinding machines

- Mixing or kneading machines:

Concrete or mortar mixers

Machines for mixing mineral substanceswith bitumen

429

HeadingNo.

84.75

84.76

84.77

H.S.Code

8474.39

8474.80

8474.90

8475.10

8475.20

8475.90

8476.11

8476.19

8476.90

8477.10

8477.20

8477.30

8477.40

8477.51

- Other

Other machinery

Parts

Machines for assembling electric orelectronic lamps, tubes or valves orflashbulbs, in glass envelopes; machines formanufacturing or hot working glass orglassware.

Machines for assembling electric orelectronic lamps. tubes or valves orflashbulbs, in glass envelopes

Machines for manufacturing or hotworking glass or glassware

Parts

Automatic goods-vending machines (forexample, postage stamp, cigarette, food orbeverage machines), including money-changing machines.

- Machines:

Incorporating heating or refrigeratingdevices

- - Other

- Parts

Machinery for working rubber or plastics orfor the manufacture of products from thesematerials , not specified or includedelsewhere in this Chapter.

- Injection-moulding machines

- Extruders

- Blow moulding machines

- Vacuum moulding machines and otherthermoforming machines

- Other machinery for moulding orotherwise forming:

- For moulding or retreading pneumatictyres or for moulding or otherwiseforming inner tubes

430

HeadingNo.

84.78

84.79

84.80

H.S.Code

8477.59

8477.80

8477.90

8478.10

8478.90

8479.10

8479.20

8479.30

8479.40

8479.81

8479.82

8479.89

8479.90

8480.10

8480.20

8480.30

- - Other

- Other machinery

Parts

Machinery for preparing or making uptobacco, not specified or included elsewherein this Chapter.

- Machinery

- Parts

Machines and mechanical appliances havingindividual functions , not specified orincluded elsewhere in this Chapter.

- Machinery for public works, building orthe like

- Machinery for the extraction orpreparation of animal or fixed vegetablefats or oils

- Presses for the manufacture of particleboard or fibre building board of wood orother ligneous materials and othermachinery for treating wood or cork

- Rope or cable-making machines

- Other machines and mechanicalappliances:

- - For treating metal, including electricwire coil-winders

- - Mixing, kneading, crushing, grinding,screening, sifting, homogenising,emulsifying or stirring machines

- - Other

- Parts

Moulding boxes for metal foundry; mouldbases; moulding patterns ; moulds for metal(other than ingot moulds), metal carbides,glass, mineral materials , rubber or plastics.

- Moulding boxes for metal foundry

-MouldMould bases

- Moulding patterns

431

HeadingNo.

84.81

84.82

H.S.Code

8480.41

8480.49

8480.50

8480.60

8480.71

8480.79

8481.10

8481.20

8481.30

8481.40

8481.80

8481.90

8482.10

8482.20

8482.30

8482.40

8482.50

8482.80

8482.91

8482.99

Moulds for metal or metal carbides:

- Injection or compression types

- Other

- Moulds for glass

- Moulds for mineral materials

Moulds for rubber or plastics:

Injection or compression types

Other

Taps, cocks, valves and similar appliancesfor pipes, boiler shells, tanks, vats or thelike, including pressure-reducing valves andthermostatically controlled valves.

- Pressure-reducing valves

- Valves for oleohydraulic or pneumatictransmissions

- Check valves

- Safety or relief valves

- Other appliances

- Parts

Ball or roller bearings.

Ball bearings

Tapered roller bearings, including coneand tapered roller assemblies

Spherical roller bearings

Needle roller bearings

Other cylindrical roller bearings

Other, including combined ball/rollerbearings

Parts:

- - Balls, needles and rollers

- - Other

432

HeadingNo.

84.83

84.84

84.85

186137 2E

H.S.Code

8483.10

8483.20

8483.30

8483.40

8483.50

8483.60

8483.90

8484.10

8484.90

8485.10

8485.90

Transmission shafts (including cam shaftsand crank shafts ) and cranks; bearinghousings and plain shaft bearings; gearsand gearing ; ball screws ; gear boxes andother speed changers , including torqueconverters ; flywheels and pulleys, includingpulley blocks; clutches and shaft couplings( including universal joints).

Transmission shafts (including cam shaftsand crank shafts) and cranks

Bearing housings, incorporating ball orroller bearings

Bearing housings, not incorporating ball

or roller bearings; plain shaft bearings

Gears and gearing, other than toothed

wheels, chain sprockets and other

transmission elements presented

separately; ball screws: gear boxes and

other speed changers, including torque

converters

Flywheels and pulleys, including pulleyblocks

Clutches and shaft couplings (includinguniversal joints)

Parts

Gaskets and similar joints of metal sheetingcombined with other material or of two ormore layers of metal; sets or assortments ofgaskets and similar joints, dissimilar incomposition , put up in pouches, envelopesor similar packings.

- Gaskets and similar joints of metalsheeting combined with other material orof two or more layers of metal

- Other

Machinery parts, not containing electricalconnectors , insulators , coils, contacts orother electrical features , not specified orincluded elsewhere in this Chapter.

- Ships' propellers and blades therefor

- Other

433

CHAPTER 85

Electrical machinery and equipment and parts thereof;sound recorders and reproducers,

television image and sound recorders and reproducers, andparts and accessories of such articles

Notes.

I.- This Chapter does not cover:

(a) Electrically warmed blankets, bed pads, foot-muffs or the like;electrically warmed clothing, footwear or ear pads or other electricallywarmed articles worn on or about the person;

(b) Articles of glass of heading No. 70.1 1; or

(c) Electrically heated furniture of Chapter 94.

2.- Headings Nos. 85.01 to 85.04 do not apply to goods described in headingNo. 85.11, 85.12, 85.40, 85.41 or 85.42.

However, metal tank mercury arc rectifiers remain classified inheading No. 85.04.

3.- Heading No. 85.09 covers only the following electro-mechanical machinesof the kind commonly used for domestic purposes:

(a) Vacuum cleaners, floor polishers, food grinders and mixers, and fruit orvegetable juice extractors, of any weight;

(b) Other machines provided the weight of such machines does not exceed20 kg.

The heading does not, however, apply to fans or ventilating orrecycling hoods incorporating a fan, whether or not fitted with filters(heading No. 84.14), centrifugal clothes-dryers (heading No. 84.21), dishwashing machines (heading No. 84.22), household washing machines(heading No. 84.50), roller or other ironing machines (heading No. 84.20 or84.51), sewing machines (heading No. 84.52), electric scissors (heading No.85.08) or to electro-thermic appliances (heading No. 85.16).

4.- For the purposes of heading No. 85.34 "printed circuits" are circuitsobtained by forming on an insulating base, by any printing process (forexample, embossing, plating-up, etching) or by the "film circuit" technique,conductor elements , contacts or other printed components (for example,inductances, resistors, capacitors) alone or interconnected according to apre-established pattern, other than elements which can produce, rectify,modulate or amplify an electrical signal (for example, semiconductorelements).

The term "printed circuits" does not cover circuits combined withelements other than those obtained during the printing process. Printedcircuits may, however, be fitted with non-printed connecting elements.

434

n

N

Thin- or thick- film circuits comprising passive and active elementsobtained during the same technological process are to be classified inheading No. 85.42.

5.- For the purposes of headings Nos. 85.41 and 85.42:

(A) "Diodes, transistors and similar semiconductor devices" are semicon-ductor devices the operation of which depends on variations inresistivity on the application of an electric field;

(B) "Electronic integrated circuits and microassemblies" are:

(a) Monolithic integrated circuits in which the circuit elements(diodes, transistors, resistors, capacitors, interconnections, etc.) arecreated in the mass (essentially) and on the surface of asemiconductor material (doped silicon, for example) and areinseparably associated;

(b) Hybrid integrated circuits in which passive elements (resistors,capacitors, interconnections, etc.), obtained by thin- or thick-filmtechnology, and active elements (diodes, transistors, monolithicintegrated circuits, etc.), obtained by semiconductor technology,are combined to all intents and purposes indivisibly, on a singleinsulating substrate (glass, ceramic, etc.). These circuits may alsoinclude discrete components;

(c) Microassemblies of the moulded module, micromodule or similartypes, consisting of discrete, active or both active and passivecomponents which are combined and interconnected.

For the classification of the articles defined in this Note, headings Nos.85.41 and 85.42 shall take precedence over any other heading in theNomenclature which might cover them by reference to, in particular, theirfunction.

6.- Records , tapes and other media of heading No. 85.23 or 85. 24 remainclassified in those headings, whether or not they are presented with theapparatus for which they are intended.

HeadingNo.

85.01

186137 2E2

H.S.Code

8501.10

8501.20

8501.31

Electric motors and generators (excludinggenerating sets).

- Motors of an output not exceeding37.5 W

- Universal AC/DC motors of an outputexceeding 37.5 W

- Other DC motors; DC generators:

- - Of an output not exceeding 750 W

435

HeadingNo.

85.02

85.03

85.04

H.S.Code

8501.32

8501.33

8501.34

8501.40

8501.51

8501.52

8501.53

8501.61

8501.62

8501.63

8501.64

8502.11

8502.12

8502.13

8502.20

8502.30

8502.40

8503.00

Of an output exceeding 750 W but notexceeding 75 kW

-- Of an output exceeding 75 kW but notexceeding 375 kW

Of an output exceeding 375 kW

- Other AC motors, single-phase

- Other AC motors, multi-phase:

Of an output not exceeding 750 W

Of an output exceeding 750 W but notexceeding 75 kW

- Of an output exceeding 75 kW

AC generators (alternators):

Of an output not exceeding 75 kVA

Of an output exceeding 75 kVA but notexceeding 375 kVA

Of an output exceeding 375 kVA butnot exceeding 750 kVA

Of an output exceeding 750 kVA

Electric generating sets and rotaryconverters.

Generating sets with compression -ignitioninternal combustion piston engines (dieselor semi -diesel engines):

Of an output not exceeding 75 kVA

Of an output exceeding 75 kVA but notexceeding 375 kVA

- Of an output exceeding 375 kVA

Generating sets with spark-ignitioninternal combustion piston engines

- Other generating sets

Electric rotary converters

Parts suitable for use solely or principallywith the machines of heading No. 85.01 or85.02.

Electrical transformers, static converters(for example, rectifiers) and inductors.

436

HeadingNo.

85.05

H.S.Code

8504.10

8504.21

8504.22

8504.23

8504.31

8504.32

8504.33

8504.34

8504.40

8504.50

8504.90

8505.11

8505.19

8505.20

8505.30

8505.90

- Ballasts for discharge lamps or tubes

- Liquid dielectric transformers:

- Having a power handling capacity notexceeding 650 kVA

- - Having a power handling capacityexceeding 650 kVA but not exceeding10,000 kVA

- Having a power handling capacityexceeding 10,000 kVA

- Other transformers:

- - Having a power handling capacity notexceeding 1 kVA

- - Having a power handling capacityexceeding 1 kVA but not exceeding 16kVA

- Having a power handling capacityexceeding 16 kVA but not exceeding

500 kVA

- - Having a power handling capacityexceeding 500 kVA

- Static converters

- Other inductors

- Parts

Electro-magnets ; permanent magnets and

articles intended to become permanent

magnets after magnetisation ; electro-

magnetic or permanent magnet chucks,

clamps and similar holding devices; electro-

magnetic couplings , clutches and brakes;

electro-magnetic lifting heads.

- Permanent magnets and articles intended

to become permanent magnets aftermagnetisation:

- - Of metal

- - Other

- Electro-magnetic couplings, clutches and

brakes

- Electro-magnetic lifting heads

- Other, including parts

437

HeadingNo.

85.06

85.07

85.08

85.09

H.S.Code

8506.11

8506.12

8506.13

8506.19

8506.20

8506.90

8507.10

8507.20

8507.30

8507.40

8507.80

8507.90

8508.10

8508.20

8508.80

8508.90

8509.10

8509.20

8509.30

8509.40

8509.80

8509.90

Primary cells and primary batteries.

- Of an external volume not exceeding300 cm':

- - Manganese dioxide

- - Mercuric oxide

- - Silver oxide

- - Other

- Of an external volume exceeding 300 cm'

- Parts

Electric accumulators, including separatorstherefor, whether or not rectangular(including square).

- Lead-acid, of a kind used for startingpiston engines

- Other lead-acid accumulators

- Nickel-cadmium

- Nickel-iron

- Other accumulators

- Parts

Electro-mechanical tools for working in thehand, with self-contained electric motor.

- Drills of all kinds

- Saws

- Other tools

- Parts

Electro-mechanical domestic appliances,with self-contained electric motor.

- Vacuum cleaners

- Floor polishers

- Kitchen waste disposers

- Food grinders and mixers; fruit orvegetable juice extractors

- Other appliances

- Parts

438

HeadingNo.

85.10

85.11

85.12

H.S.Code

8510.10

8510.20

8510.90

8511.10

8511.20

8511.30

8511.40

8511.50

8511.80

8511.90

8512.10

8512.20

8512.30

8512.40

8512.90

Shavers and hair clippers, with self-contained electric motor.

- Shavers

- Hair clippers

- Parts

Electrical ignition or starting equipment ofa kind used for spark-ignition orcompression -ignition internal combustionengines (for example, ignition magnetos,magneto-dynamos, ignition coils, sparkingplugs and glow plugs, starter motors);generators (for example, dynamos,alternators ) and cut-outs of a kind used inconjunction with such engines.

- Sparking plugs

- Ignition magnetos; magneto-dynamos;magnetic flywheels

- Distributors; ignition coils

- Starter motors and dual purpose starter-generators

- Other generators

- Other equipment

- Parts

Electrical lighting or signalling equipment(excluding articles of heading No. 85.39),windscreen wipers, defrosters anddemisters, of a kind used for cycles ormotor vehicles.

- Lighting or visual signalling equipment ofa kind used on bicycles

- Other lighting or visual signallingequipment

- Sound signalling equipment

- Windscreen wipers, defrosters anddemisters

- Parts

439

HeadingNo.

85.13

85.14

85.15

H.S.Code

8513.10

8513.90

8514.10

8514.20

8514.30

8514.40

8514.90

8515.11

8515.19

8515.21

8515.29

8515.31

8515.39

8515.80

Portable electric lamps designed to functionby their own source of energy (for example,dry batteries, accumulators , magnetos),other than lighting equipment of headingNo. 85.12.

- Lamps

- Parts

Industrial or laboratory electric (includinginduction or dielectric ) furnaces and ovens;other industrial or laboratory induction ordielectric heating equipment.

- Resistance heated furnaces and ovens

- Induction or dielectric furnaces and ovens

- Other furnaces and ovens

- Other induction or dielectric heatingequipment

- Parts

Electric (including electrically heated gas),laser or other light or photon beam,ultrasonic , electron beam, magnetic pulse orplasma arc soldering, brazing or weldingmachines and apparatus, whether or notcapable of cutting; electric machines andapparatus for hot spraying of metals orsintered metal carbides.

- Brazing or soldering machines andapparatus:

- - Soldering irons and guns

- - Other

- Machines and apparatus for resistancewelding of metal:

- - Fully or partly automatic

- - Other

- Machines and apparatus for arc(including plasma arc) welding of metals:

- - Fully or partly automatic

- - Other

- Other machines and apparatus

440

HeadingNo.

85.16

85.17

H.S.Code

8515.90

8516.10

8516.21

8516.29

8516.31

8516.32

8516.33

8516.40

8516.50

8516.60

8516.71

8516.72

8516.79

8516.80

8516.90

8517.10

Parts

Electric instantaneous or storage waterheaters and immersion heaters; electricspace heating apparatus and soil heatingapparatus ; electro-thermic hair-dressingapparatus (for example, hair dryers, haircurlers, curling tong heaters ) and handdryers; electric smoothing irons; otherelectro -thermic appliances of a kind usedfor domestic purposes; electric heatingresistors , other than those of heading No.85.45.

- Electric instantaneous or storage waterheaters and immersion heaters

- Electric space heating apparatus andelectric soil heating apparatus:

- - Storage heating radiators

- - Other

- Electro-thermic hair-dressing or hand-drying apparatus:

- - Hair dryers

- - Other hair-dressing apparatus

- - Hand-drying apparatus

- Electric smoothing irons

- Microwave ovens

- Other ovens; cookers, cooking plates,boiling rings, grillers and roasters

- Other electro-thermic appliances:

- Coffee or tea makers

- - Toasters

- - Other

- Electric heating resistors

- Parts

Electrical apparatus for line telephony orline telegraphy, including such apparatusfor carrier-current line systems.

- Telephone sets

441

HeadingNo.

85.18

85.19

H.S.Code

8517.20

8517.30

8517.40

8517.81

8517.82

8517.90

8518.10

8518.21

8518.22

8518.29

8518.30

8518.40

8518.50

8518.90

8519.10

8519.21

8519.29

- Teleprinters

- Telephonic or telegraphic switchingapparatus

- Other apparatus, for carrier-current linesystems

- Other apparatus:

- - Telephonic

- - Telegraphic

- Parts

Microphones and stands therefor;loudspeakers , whether or not mounted intheir enclosures ; headphones, earphonesand combined microphone/speaker sets;audio-frequency electric amplifiers ; electricsound amplifier sets.

- Microphones and stands therefor

- Loudspeakers, whether or not mounted intheir enclosures:

- Single loudspeakers, mounted in theirenclosures

- - Multiple loudspeakers , mounted in thesame enclosure

- - Other

- Headphones, earphones and combinedmicrophone/speaker sets

- Audio-frequency electric amplifiers

- Electric sound amplifier sets

- Parts

Turntables (record-decks), record-players,cassette-players and other soundreproducing apparatus, not incorporating asound recording device.

- Coin- or disc-operated record-players

- Other record-players:

- - Without loudspeaker

- - Other

442

HeadingNo.

85.20

85.21

85.22

85.23

H.S.Code

8519.31

8519.39

8519.40

8519.91

8519.99

8520.10

8520.20

8520.31

8520.39

8520.90

8521.10

8521.90

8522.10

8522.90

8523.11

8523.12

- Turntables (record-decks):

- - With automatic record changingmechanism

- Other

- Transcribing machines

- Other sound reproducing apparatus:

- - Cassette-type

- - Other

Magnetic tape recorders and other soundrecording apparatus, whether or notincorporating a sound reproducing device.

- Dictating machines not capable ofoperating without an external source ofpower

- Telephone answering machines

- Other magnetic tape recordersincorporating sound reproducingapparatus:

- - Cassette-type

- - Other

- Other

Video recording or reproducing apparatus.

- Magnetic tape-type

- Other

Parts and accessories of apparatus ofheadings Nos. 85. 19 to 85.21.

- Pick-up cartridges

- Other

Prepared unrecorded media for soundrecording or similar recording of otherphenomena, other than products of Chapter37.

- Magnetic tapes:

- - Of a width not exceeding 4 mm

- - Of a width exceeding 4 mm but notexceeding 6.5 mm

443

HeadingNo.

85.24

85.25

85.26

85.27

H.S.Code

8523.13

8523.20

8523.90

8524.10

8524.21

8524.22

8524.23

8524.90

8525.10

8525.20

8525.30

8526.10

8526.91

8526.92

- - Of a width exceeding 6. 5 mm

- Magnetic discs

Other

Records, tapes and other recorded mediafor sound or other similarly recordedphenomena, including matrices and mastersfor the production of records , but excludingproducts of Chapter 37.

- Gramophone records

- Magnetic tapes:

- - Of a width not exceeding 4 mm

- - Of a width exceeding 4 mm but notexceeding 6.5 mm

- - Of a width exceeding 6.5 mm

- Other

Transmission apparatus for radio-telephony,radio-telegraphy , radio-broadcasting ortelevision, whether or not incorporatingreception apparatus or sound recording orreproducing apparatus; television cameras.

- Transmission apparatus

- Transmission apparatus incorporatingreception apparatus

- Television cameras

Radar apparatus, radio navigational aidapparatus and radio remote controlapparatus.

- Radar apparatus

- Other:

- - Radio navigational aid apparatus

- - Radio remote control apparatus

Reception apparatus for radio-telephony,radio-telegraphy or radio-broadcasting,whether or not combined, in the samehousing, with sound recording orreproducing apparatus or a clock.

444

HeadingNo.

85.28

85.29

H.S.Code

8527.11

8527.19

8527.21

8527.29

8527.31

8527.32

8527.39

8527.90

8528.10

8528.20

9529.10

8529.90

Radio-broadcast receivers capable ofoperating without an external source ofpower, including apparatus capable ofreceiving also radio-telephony or radio-telegraphy:

Combined with sound recording orreproducing apparatus

- Other

Radio-broadcast receivers not capable ofoperating without an external source ofpower, of a kind used in motor vehicles,including apparatus capable of receivingalso radio-telephony or radio-telegraphy:

Combined with sound recording orreproducing apparatus

Other

Other radio-broadcast receivers, includingapparatus capable of receiving also radio-telephony or radio-telegraphy:

Combined with sound recording orreproducing apparatus

- Not combined with sound recording orreproducing apparatus but combinedwith a clock

Other

Other apparatus

Television receivers (including videomonitors and video projectors ), whether ornot combined, in the same housing, withradio-broadcast receivers or sound or videorecording or reproducing apparatus.

- Colour

- Black and white or other monochrome

Parts suitable for use solely or principallywith the apparatus of headings Nos. 85.25to 85.28.

- Aerials and aerial reflectors of all kinds;parts suitable for use therewith

- Other

445

HeadingNo.

85.30

85.31

85.32

8533

H.S.Code

8530.10

8530.80

8530.90

8531.10

8531.20

8531.80

8531.90

8532.10

8532.21

8532.22

8532.23

8532.24

8532.25

8532.29

8532.30

8532.90

Electrical signalling , safety or trafficcontrol equipment for railways, tramways,roads, inland waterways , parking facilities,port installations or airfields (other thanthose of heading No. 86.08).

- Equipment for railways or tramways

- Other equipment

- Parts

Electric sound or visual signallingapparatus (for example, bells, sirens,indicator panels, burglar or fire alarms),other than those of heading No. 85.12 or85.30.

- Burglar or fire alarms and similarapparatus

- Indicator panels incorporating liquidcrystal devices (LCD) or light emittingdiodes (LED)

- Other apparatus

- Parts

Electrical capacitors , fixed, variable oradjustable (pre-set).

Fixed capacitors designed for use in50/60 Hz circuits and having a reactivepower handling capacity of not less than0.5 kVar (power capacitors)

- Other fixed capacitors:

Tantalum

- - Aluminium electrolytic

- - Ceramic dielectric, single layer

- - Ceramic dielectric, multilayer

- - Dielectric of paper or plastics

- - Other

- Variable or adjustable (pre-set) capacitors

- Parts

Electrical resistors (including rheostats andpotentiometers ), other than heatingresistors.

446

HeadingNo.

85.34

85.35

85.36

H.S.Code

8533.10

8533.21

8533.29

8533.31

8533.39

8533.40

8533.90

8534.00

8535.10

8535.21

8535.29

8535.30

8535.40

8535.90

- Fixed carbon resistors, composition orfilm types

- Other fixed resistors:

- For a power handling capacity notexceeding 20 W

- Other

Wirewound variable resistors, includingrheostats and potentiometers:

For a power handling capacity notexceeding 20 W

- - Other

- Other variable resistors , includingrheostats and potentiometers

- Parts

Printed circuits.

Electrical apparatus for switching orprotecting electrical circuits, or for makingconnections to or in electrical circuits (forexample, switches, fuses, lightningarresters, voltage limiters, surgesuppressors, plugs, junction boxes), for avoltage exceeding 1,000 volts.

- Fuses

Automatic circuit breakers:

- For a voltage of less than 72.5 kV

- - Other

- Isolating switches and make-and-breakswitches

- Ligntning arresters, voltage limiters andsurge suppressors

- Other

Electrical apparatus for switching orprotecting electrical circuits, or for makingconnections to or in electrical circuits (forexample, switches , relays, fuses, surgesuppressors, plugs, sockets , lamp-holders,junction boxes ), for a voltage not exceeding1,000 volts.

447

HeadingNo.

85.37

85.38

85.39

H.S.Code

8536.10

8536.20

8536.30

8536.41

8536.49

8536.50

8536.61

8536.69

8536.90

8537.10

8537.20

8538.10

8538.90

8539.10

8539.21

- Fuses

- Automatic circuit breakers

- Other apparatus for protecting electricalcircuits

- Relays:

For a voltage not exceeding 60 V

Other

- Other switches

- Lamp-holders, plugs and sockets:

Lamp-holders

- - Other

Other apparatus

Boards, panels (including numerical controlpanels ), consoles, desks, cabinets and otherbases, equipped with two or more apparatusof heading No. 85.35 or 85.36, for electriccontrol or the distribution of electricity,including those incorporating instrumentsor apparatus of Chapter 90, other thanswitching apparatus of heading No. 85.17.

- For a voltage not exceeding 1,000 V

- For a voltage exceeding 1,000 V

Parts suitable for use solely or principallywith the apparatus of heading No. 85.35,85.36 or 85.37.

- Boards, panels, consoles, desks, cabinetsand other bases for the goods of headingNo. 85.37, not equipped with theirapparatus

- Other

Electric filament or discharge lamps,including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps.

- Sealed beam lamp units

- Other filament lamps, excluding ultra-violet or infra-red lamps:

- Tungsten halogen

448

HeadingNo.

85.40

186137 2F

H.S.Code

8539.22

8539.29

8539.31

8539.39

8539.40

8539.90

8540.11

8540.12

8540.20

8540.30

8540.41

8540.42

8540.49

8540.81

8540.89

8540.91

8540.99

- - Other, of a power not exceeding 200 Wand for a voltage exceeding 100 V

- - Other

- Discharge lamps, other than ultra-violetlamps:

- - Fluorescent, hot cathode

- - Other

Ultra-violet or infra-red lamps; arc lamps

- Parts

Thermionic, cold cathode or photo-cathodevalves and tubes (for example, vacuum orvapour or gas filled valves and tubes,mercury arc rectifying valves and tubes,cathode-ray tubes , television camera tubes).

- Cathode-ray television picture tubes,including video monitor cathode-raytubes:

- - Colour

- - Black and white or other monochrome

- Television camera tubes; imageconverters and intensifiers; other photo-cathode tubes

- Other cathode-ray tubes

- Microwave tubes (for example,magnetrons, klystrons, travelling wavetubes, carcinotrons), excluding grid-controlled tubes:

- - Magnetrons

- - Klystrons

- - Other

- Other valves and tubes:

- - Receiver or amplifier valves and tubes

- - Other

- Parts:

- - Of cathode-ray tubes

- - Other

449

HeadingNo.

85.41

85.42

85.43

U.S.Code

8541.10

8541.21

8541.29

8541.30

8541.40

8541.50

8541.60

8541.90

8542.11

8542.19

8542.20

8542.80

8542.90

8543.10

8543.20

8543.30

8543.80

Diodes, transistors and similar semi-conductor devices; photosensitive semi-conductor devices, including photovoltaiccells whether or not assembled in modulesor made up into panels; light emittingdiodes; mounted piezo-electric crystals.

- Diodes, other than photosensitive or lightemitting diodes

- Transistors, other than photosensitivetransistors:

- With a dissipation rate of less than I W

- - Other

Thyristors, diacs and triacs , other thanphotosensitive devices

- Photosensitive semiconductor devices,including photovoltaic cells whether ornot assembled in modules or made upinto panels ; light emitting diodes

Other semiconductor devices

- Mounted piezo-electric crystals

- Parts

Electronic integrated circuits andmicroassemblies.

- Monolithic integrated circuits:

Digital

- - Other

- Hybrid integrated circuits

- Other

- Parts

Electrical machines and apparatus, havingindividual functions , not specified orincluded elsewhere in this Chapter.

- Particle accelerators

- Signal generators

- Machines and apparatus for electro-plating, electrolysis or electrophoresis

- Other machines and apparatus

450

HeadingNo.

85.44

85.45

186137 2F2

H.S.Code

8543.90

8544.11

8544.19

8544.20

8544.30

8544.41

8544.49

8544.51

8544.59

8544.60

8544.70

8545.11

8545.19

8545.20

- Parts

Insulated ( including enamelled or anodised)wire, cable (including co-axial cable) andother insulated electric conductors, whetheror not fitted with connectors ; optical fibrecables, made up of individually sheathedfibres, whether or not assembled withelectric conductors or fitted withconnectors.

Winding wire:

Of copper

Other

Co-axial cable and other co-axial electricconductors

Ignition wiring sets and other wiring setsof a kind used in vehicles, aircraft orships

Other electric conductors, for a voltagenot exceeding 80 V:

- Fitted with connectors

-- Other

- Other electric conductors , for a voltageexceeding 80 V but not exceeding 1,000V:

- - Fitted with connectors

- Other

Other electric conductors, for a voltageexceeding 1,000 V

Optical fibre cables

Carbon electrodes, carbon brushes, lampcarbons, battery carbons and other articlesof graphite or other carbon , with or withoutmetal, of a kind used for electricalpurposes.

Electrodes:

Of a kind used for furnaces

- - Other

- Brushes

451

HeadingNo.

85.46

85.47

85.48

H.S.Code

8545.90

8546.10

8546.20

8546.90

8547.10

8547.20

8547.90

8548.00

- Other

Electrical insulators of any material.-

- Of glass

- Of ceramics

- Other

Insulating fittings for electrical machines,appliances or equipment, being fittingswholly of insulating material apart from anyminor components of metal (for example,threaded sockets) incorporated duringmoulding solely for purposes of assembly,other than insulators of heading No. 85.46;electrical conduit tubing and joints therefor,of base metal lined with insulating material.

- Insulating fittings of ceramics

- Insulating fittings of plastics

- Other

Electrical parts of machinery or apparatus,not specified or included elsewhere in thisChapter.

452

SECTION XVII

Vehicles, aircraft, vesselsand associated transport equipment

c

A

Notes.

I.- This Section does not cover articles of heading No. 95.01, 95.03 or 95.08, orbobsleighs, toboggans or the like of heading No. 95.06.

2.- The expressions "parts" and "parts and accessories" do not apply to thefollowing articles, whether or not they are identifiable as for the goods ofthis Section:

(a) Joints, washers or the like of any material (classified according to theirconstituent material or in heading No. 84.84) or other articles ofvulcanised rubber other than hard rubber (heading No. 40.16);

(b) Parts of general use, as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39);

(c) Articles of Chapter 82 (tools);

(d) Articles of heading No. 83.06;

(e) Machines or apparatus of headings Nos. 84.01 to 84.79, or parts thereof;articles of heading No. 84.81 or 84.82 or, provided they constituteintegral parts of engines. or motors, articles of heading No. 84.83;

(f) Electrical machinery or equipment (Chapter 85):

(g) Articles of Chapter 90;

(h) Articles of Chapter 91;

(ij) Arms (Chapter 93);

(k) Lamps or lighting fittings of heading No. 94.05; or

(1) Brushes of a kind used as parts of vehicles (heading No. 96.03).

3.- References in Chapters 86 to 88 to "parts" or "accessories" do not apply toparts or accessories which are not suitable for use solely or principally with

the articles of those Chapters. A part or accessory which answers to adescription in two or more of the headings of those Chapters is to beclassified under that heading which corresponds to the principal use of thatpart or accessory.

4.- Aircraft specially constructed so that they can also be used as road vehicles

are classified as aircraft.

Amphibious motor vehicles are classified as motor vehicles.

5.- Air-cushion vehicles are to be classified within this Section with the vehiclesto which they are most akin as follows:

(a) In Chapter 86 if designed to travel on a guide-track (hovertrains);

453

(b) In Chapter 87 if designed to travel over land or over both land andwater;

(c) In Chapter 89 if designed to travel over water, whether or not able toland on beaches or landing-stages or also able to travel over ice.

Parts and accessories of air-cushion vehicles are to be classified in thesame way as those of vehicles of the heading in which the air-cushionvehicles are classified under the above provisions.

Hovertrain track fixtures and fittings are to be classified as railwaytrack fixtures and fittings , and signalling , safety or traffic control equipmentfor hovertrain transport systems as signalling, safety or traffic controlequipment for railways.

454

CHAPTER 86

Railway or tramway locomotives,rolling-stock and parts thereof;

railway or tramway track fixtures and fittingsand parts thereof; mechanical (including electro-mechanical)

traffic signalling equipment of all kinds

C

Notes.

I.- This Chapter does not cover:

(a) Railway or tramway sleepers of wood or of concrete, or concrete guide-track sections for hovertrains (heading No. 44.06 or 68.10);

(b) Railway or tramway track construction material of iron or steel ofheading No. 73.02; or

(c) Electrical signalling, safety or traffic control equipment of heading No.85.30.

2.- Heading No. 86.07 applies, inter alia, to:

(a) Axles, wheels, wheel sets (running gear), metal tyres, hoops and hubsand other parts of wheels;

(b) Frames, underframes, bogies and bissel-bogies;

(c) Axle boxes; brake gear;

(d) Buffers for rolling-stock; hooks and other coupling gear and corridorconnections;

(e) Coachwork.

3.- Subject to the provisions of Note 1 above, heading No. 86.08 applies, interalia, to:

(a) Assembled track, turntables, platform buffers, loading guages;

(b) Semaphores, mechanical signal discs, level crossing control gear, signaland point controls, and other mechanical (including electro-mechani-cal) signalling, safety or traffic control equipment, whether or not fittedfor electric lighting, for railways, tramways, roads, inland waterways,

parking facilities, port installations or airfields.

HeadingNo.

86.01

H.S.Code

8601.10

8601.20

Rail locomotives powered from an externalsource of electricity or by electricaccumulators.

- Powered from an external source ofelectricity

- Powered by electric accumulators

455

Y

HeadingNo.

H.S.Code

86.02

8602.10

8602.90

86.03

8603.10

8603.90

86.04 8604.00

86.05 8605.00

86.06

8606.10

8606.20

8606.30

8606.91

8606.92

8606.99

Other rail locomotives ; locomotive tenders.

- Diesel-electric locomotives

- Other

Self-propelled railway or tramway coaches,vans and trucks, other than those ofheading No. 86.04.

- Powered from an external source ofelectricity

- Other

Railway or tramway maintenance or servicevehicles, whether or not self-propelled (forexample, workshops, cranes, ballasttampers, trackliners, testing coaches andtrack inspection vehicles).

Railway or tramway passenger coaches, notself-propelled ; luggage vans, post officecoaches and other special purpose railwayor tramway coaches, not self-propelled(excluding those of heading No. 86.04).

Railway or tramway goods vans andwagons, not self-propelled.

- Tank wagons and the like

- Insulated or refrigerated vans andwagons, other than those of subheadingNo. 8606.10

- Self-discharging vans and wagons, otherthan those of subheading No. 8606.10 or8606.20

- Other:

- - Covered and closed

- - Open, with non-removable sides of aheight exceeding 60 cm

- - Other

Parts of railway or tramway locomotives or86.07rolling-stock.

- Bogies, bissel-bogies, axles and wheels,and parts thereof:

456

HeadingNo.

c

w

86.08

86.09

•

H.S.Code

8607.11

8607.12

8607.19

8607.21

8607.29

8607.30

8607.91

8607.99

8608.00

8609.00

- - Driving bogies and bissel-bogies

- - Other bogies and bissel-bogies

- - Other, including parts

Brakes and parts thereof:

- - Air brakes and parts thereof

- Other

- Hooks and other coupling devices,buffers, and parts thereof

- Other:

- - Of locomotives

- Other

Railway or tramway track fixtures andfittings; mechanical (including electro-mechanical) signalling , safety or trafficcontrol equipment for railways, tramways,roads, inland waterways, parking facilities,port installations or airfields ; parts of theforegoing.

Containers (including containers for thetransport of fluids) specially designed andequipped for carriage by one or moremodes of transport.

0 457

CHAPTER 87

Vehicles other than railway or tramway rolling-stock,and parts and accessories thereof

Noes.

I.- This Chapter does not cover railway or tramway rolling-stock designedsolely for running on rails.

2.- For the purposes of this Chapter, "tractors" means vehicles constructedessentially for hauling or pushing another vehicle, appliance or load,whether or not they contain subsidiary provision for the transport, inconnection with the main use of the tractor, of tools, seeds, fertilisers orother goods.

3.- For the purposes of heading No. 87.02, the expression " public - transporttype pasenger motor vehicles" means vehicles designed for the transport often persons or more ( including the driver).

4.- Motor chassis fitted with cabs tall in headings Nos. 87.02 to 87.04 and not inheading No. 87.06.

5.- Heading No. 87. 12 includes all children 's bicycles. Other children's cyclesfall in heading No. 95.01.

HeadingNo.

87.01

87.02

87.03

H.S.Code

8701.10

8701.20

8701.30

8701.90

8702.10

8702.90

Tractors (other than tractors of headingNo. 87.09).

- Pedestrian controlled tractors

- Road tractors for semi-trailers

- Track-laying tractors

- Other

Public-transport type passenger motorvehicles.

- With compression-ignition internalcombustion piston engine (diesel or semi-diesel)

- Other

Motor cars and other motor vehiclesprincipally designed for the transport ofpersons (other than those of heading No.87.02), including station wagons and racingcars.

458

HeadingNo.

87.04

H.S.Code

8703.10

8703.21

8703.22

8703.23

8703.24

8703.31

8703.32

8703.33

8703.90

8704.10

8704.21

8704.22

8704.23

8704.31

8704.32

8704.90

- Vehicles specially designed for travellingon snow; golf cars and similar vehicles

- Other vehicles, with spark-ignitioninternal combustion reciprocating pistonengine:

Of a cylinder capacity not exceeding1,000 cc

Of a cylinder capacity exceeding1,000 cc but not exceeding 1.500 cc

Of a cylinder capacity exceeding1,500 cc but not exceeding 3,000 cc

Of a cylinder capacity exceeding3,000 cc

Other vehicles, with compression-ignitioninternal combustion piston engine (dieselor semi-diesel):

Of a cylinder capacity not exceeding1,500 cc

Of a cylinder capacity exceeding1,500 cc but not exceeding 2,500 cc

Of a cylinder capacity exceeding2.500 cc

- Other

Motor vehicles for the transport of goods.

- Dumpers designed for off-highway use

- Other, with compression-ignition internalcombustion piston engine (diesel or semi-diesel):

g.v.w. not exceeding 5 tonnes

- g.v.w. exceeding 5 tonnes but notexceeding 20 tonnes

- g.v.w. exceeding 20 tonnes

Other, with spark-ignition internalcombustion piston engine:

- - g.v.w. not exceeding 5 tonnes

- g.v.w. exceeding 5 tonnes

Other

459

HeadingNo.

87.05

87.06

87.07

87.08

H.S.Code

8705.10

8705.20

8705.30

8705.40

8705.90

8706.00

8707.10

8707.90

8708.10

8708.21

8708.29

8708.31

8708.39

8708.40

8708.50

8708.60

8708.70

Special purpose motor vehicles, other thanthose principally designed for the transportof persons or goods (for example,breakdown lorries, crane lorries, firefighting vehicles, concrete-mixer lorries,road sweeper lorries, spraying lorries,mobile work-shops, mobile radiologicalunits).

- Crane lorries

- Mobile drilling derricks

- Fire fighting vehicles

- Concrete-mixer lorries

- Other

Chassis fitted with engines, for the motorvehicles of headings Nos. 87.01 to 87.05.

Bodies (including cabs), for the motorvehicles of headings Nos. 87.01 to 87.05.

- For the vehicles of heading No. 87.03

- Other

Parts and accessories of the motor vehiclesof headings Nos. 87.01 to 87.05.

- Bumpers and parts thereof

- Other parts and accessories of bodies(including cabs):

- - Safety seat belts

-- Other

- Brakes and servo-brakes and partsthereof:

- - Mounted brake linings

- - Other

Gear boxes

Drive-axles with differential, whether ornot provided with other transmissioncomponents

Non-driving axles and parts thereof

Road wheels and parts and accessoriesthereof

460

HeadingNo.

87.09

87.10

87.11

H.S.Code

8708.80

8708.91

8708.92

8708.93

8708.94

8708.99

8709.11

8709.19

8709.90

8710.00

8711.10

8711.20

8711.30

8711.40

0711.50

- Suspension shock-absorbers

- Other parts and accessories:

- - Radiators

Silencers and exhaust pipes

Clutches and parts thereof

- Steering wheels, steering columns andsteering boxes

-- Other

Works trucks, self-propelled , not fitted withlifting or handling equipment, of the typeused in factories , warehouses, dock areas orairports for short distance transport ofgoods; tractors of the type used on railwaystation platforms ; parts of the foregoingvehicles.

Vehicles:

Electrical

Other

Parts

Tanks and other armoured fighting vehicles,motorised, whether or not fitted withweapons, and parts of such vehicles.

Motorcycles (including mopeds) and cyclesfitted with an auxiliary motor, with orwithout side-cars; side-cars.

- With reciprocating internal combustionpiston engine of a cylinder capacity notexceeding 50 cc

- With reciprocating internal combustionpiston engine of a cylinder capacityexceeding 50 cc but not exceeding 250 cc

- With reciprocating internal combustionpiston engine of a cylinder capacityexceeding 250 cc but not exceeding 500 cc

- With reciprocating internal combustionpiston engine of a cylinder capacityexceeding 500 cc but not exceeding 800 cc

- With reciprocating internal combustionpiston engine of a cylinder capacityexceeding 800 cc

461

HeadingNo.

87.12

87.13

87.14

87.15

87.16

H.S.Code

8711.90

8712.00

8713.10

8713.90

8714.11

8714.19

8714.20

8714.91

8714.92

8714.93

8714.94

8714.95

8714.96

8714.99

8715.00

8716.10

8716.20

8716.31

- Other

Bicycles and other cycles ( includingdelivery tricycles), not motorised.

Invalid carriages , whether or not motorisedor otherwise mechanically propelled.

- Not mechanically propelled

- Other

Parts and accessories of vehicles ofheadings Nos. 87.11 to 87.13.

Of motorcycles (including mopeds):

Saddles

Other

- Of invalid carriages

Other:

Frames and forks, and parts thereof

Wheel rims and spokes

Hubs, other than coaster braking hubsand hub brakes, and free-wheelsprocket-wheels

- Brakes, including coaster braking hubsand hub brakes, and parts thereof

Saddles

Pedals and crank-gear, and parts thereof

Other

Baby carriages and parts thereof.

Trailers and semi-trailers ; other vehicles,not mechanically propelled; parts thereof.

- Trailers and semi-trailers of the caravantype, for housing or camping

- Self-loading or self-unloading trailers andsemi-trailers for agricultural purposes

- Other trailers and semi-trailers for thetransport of goods:

- Tanker trailers and tanker semi-trailers

462

HeadingNo.

H.S.Code

8716.39

8716.40

8716.80

8716.90

Other

Other trailers and semi-trailers

Other vehicles

Parts

463

CHAPTER 88

HeadingNo.

88.01

88.02

88.03

88.04

88.05

Aircraft, spacecraft, and parts thereof

H.S.Code

8801.10

8801.90

8802.11

8802.12

8802.20

8802.30

8802.40

8802.50

8803.10

8803.20

8803.30

8803.90

8804.00

8805.10

8805.20

Balloons and dirigibles ; gliders, hang glidersand other non-powered aircraft.

- Gliders and hang gliders

- Other

Other aircraft (for example, helicopters,aeroplanes); spacecraft (including satellites)and spacecraft launch vehicles.

- Helicopters:

- - Of an unladen weight not exceeding2,000 kg

- - Of an unladen weight exceeding 2,000 kg

- Aeroplanes and other aircraft, of an unla-den weight not exceeding 2,000 kg

- Aeroplanes and other aircraft, of an unla-den weight exceeding 2,000 kg but notexceeding 15,000 kg

- Aeroplanes and other aircraft, of an unla-den weight exceeding 15,000 kg

- Spacecraft (including satellites) and space-craft launch vehicles

Parts of goods of heading No. 88.01 or 88.02.

- Propellers and rotors and parts thereof

- Under-carriages and parts thereof

- Other parts of aeroplanes or helicopters

- Other

Parachutes (including dirigible parachutes)and rotochutes; parts thereof and accessoriesthereto.

Aircraft launching gear; deck-arrestor orsimilar gear; ground flying trainers ; parts ofthe foregoing articles.

- Aircraft launching gear and parts thereof;deck-arrestor or similar gear and partsthereof

- Ground flying trainers and parts thereof

464

CHAPTER 89

Note.

Ships, boats and floating structures

I.- A hull, an unfinished or incomplete vessel, assembled, unassembled ordisassembled, or a complete vessel unassembled or disassembled, is to beclassified in heading No. 89.06 if it does not have the essential character of avessel of a particular kind.

HeadingNo.

89.01

89.02

89.03

89.04

H.S.Code

8901.10

8901.20

8901.30

8901.90

8902.00

8903.10

8903.91

8903.92

8903.99

8904.00

Cruise ships, excursion boats, ferry-boats,cargo ships, barges and similar vessels forthe transport of persons or goods.

- Cruise ships, excursion boats and similarvessels principally designed for thetransport of persons; ferry-boats of allkinds

Tankers

Refrigerated vessels, other than those ofsubheading No. 8901.20

Other vessels for the transport of goodsand other vessels for the transport ofboth persons and goods

Fishing vessels; factory ships and othervessels for processing or preserving fisheryproducts.

Yachts and other vessels for pleasure orsports; rowing boats and canoes.

- Inflatable

- Other:

- - Sailboats, with or without auxiliarymotor

- - Motorboats, other than outboardmotorboats

- - Other

Tugs and pusher craft.

465

186137 2G

HeadingNo.

89.05

89.06

89.07

H.S.Code

8905.10

8905.20

8905.90

8906.00

8907.10

8907.90

Light-vessels, fire-floats, dredgers, floatingcranes, and other vessels the navigability ofwhich is subsidiary to their main function;floating docks; floating or submersibledrilling or production platforms.

- Dredgers

- Floating or submersible drilling orproduction platforms

- Other

Other vessels, including warships andlifeboats other than rowing boats.

Other floating structures (for example,rafts, tanks, coffer-dams, landing stages,buoys and beacons).

- Inflatable rafts

- Other

89.08 I 8908.00 Vessels and other floating structures forbreaking up.

466

SECTION XV111

Optical, photographic , cinematographic , measuring,checking, precision, medical or surgical instruments

and apparatus ; clocks and watches ; musical instruments;parts and accessories thereof

CHAPTER 90

Optical , photographic , cinematographic , measuring,checking, precision , medical or surgical instruments

and apparatus ; parts and accessories thereof

Notes.

1.- This Chapter does not cover:

(a) Articles of a kind used in machines, appliances or for other technicaluses, of vulcanised rubber other than hard rubber (heading No. 40.16),of leather or of composition leather (heading No. 42.04) or of textilematerial (heading No. 59.11);

(b) Refractory goods of heading No. 69.03; ceramic wares for laboratory,chemical or other technical uses, of heading No. 69.09;

(c) Glass mirrors, not optically worked, of heading No. 70.09, or mirrors ofbase metal or of precious metal, not being optical elements (heading No.83.06 or Chapter 71);

(d) Goods of heading No. 70.07, 70.08. 70.11, 70.14, 70.15 or 70.17;

(e) Parts of general use, as defined in Note 2 to Section XV, of base metal(Section XV) or similar goods of plastics (Chapter 39);

(f) Pumps incorporating measuring devices, of heading No. 84.13; weight-operated counting or checking machinery, or separately presentedweights for balances (heading No. 84.23); lifting or handling machinery(headings Nos. 84.25 to 84.28); paper or paperboard cutting machines ofall kinds (heading No. 84.41); fittings for adjusting work or tools onmachine-tools, of heading No. 84.66, including fittings with opticaldevices for reading the scale (for example, "optical" dividing heads) butnot those which are in themselves essentially optical instruments (forexample, alignment telescopes); calculating machines (heading No.84.70); valves or other appliances of heading No. 84.81;

(g) Searchlights or spotlights of a kind used for cycles or motor vehicles(heading No. 85.12); portable electric lamps of heading No. 85.13;cinematographic sound recording, reproducing or re-recording appara-tus (heading No. 85.19 or 85.20); sound-heads (heading No. 85.22):radar apparatus, radio navigational aid apparatus or radio remotecontrol apparatus (heading No. 85.26); sealed beam lamp units ofheading No. 85.39; optical fibre cables of heading No. 85.44;

(h) Searchlights or spotlights of heading No. 94.05;

(ij) Articles of Chapter 95;

467186137 2G2

(k) Capacity measures , which are to be classified according to theirconstituent material; or

(1) Spools , reels or similar supports (which are to be classified according totheir constituent material , for example , in heading No. 39 .23 or SectionXV).

2.- Subject to Note 1 above, parts and accessories for machines, apparatus,instruments or articles of this Chapter are to be classified according to thefollowing rules:

(a) Parts and accessories which are goods included in any of the headings ofthis Chapter or of Chapter 84, 85 or 91 (other than heading No. 84.85,85.48 or 90.33) are in all cases to be classified in their respectiveheadings;

(b) Other parts and accessories, if suitable for use solely or principally witha particular kind of machine, instrument or apparatus , or with a numberof machines, instruments or apparatus of the same heading (including amachine , instrument or apparatus of heading No. 90.10, 90.13 or 90.31)are to be classified with the machines , instruments or apparatus of thatkind;

(c) All other parts and accessories are to be classified in heading No. 90.33.

3.- The provisions of Note 4 to Section XVI apply also to this Chapter.

4.- Heading No. 90.05 does not apply to telescopic sights for fitting to arms,periscopic telescopes for fitting to submarines or tanks , or to telescopes formachines , appliances , instruments or apparatus of this Chapter or SectionXVI; such telescopic sights and telescopes are to be classified in heading No.90.13.

5.- Measuring or checking optical instruments , appliances or machines which,but for this Note, could be classified both in heading No. 90. 13 and inheading No. 90. 31 are to be classified in heading No. 90.31.

6.- Heading No. 90. 32 applies only to:

(a) Instruments and apparatus for automatically controlling the flow , level,pressure or other variables of liquids or gases , or for automaticallycontrolling temperature, whether or not their operation depends on anelectrical phenomenon which varies according to the factor to beautomatically controlled; and

(b) Automatic regulators of electrical quantities , and instruments orapparatus for automatically controlling non-electrical quantities theoperation of which depends on an electrical phenomenon varyingaccording to the factor to be controlled.

468

HeadingNo.

90.01

90.02

90.03

90.04

H.S.Code

9001.10

9001.20

9001.30

9001.40

9001.50

9001.90

9002.11

9002.19

9002.20

9002.90

9003.11

9003.19

9003.90

9004.10

9004.90

Optical fibres and optical fibre bundles;

optical fibre cables other than those of

heading No. 85.44; sheets and plates ofpolarising material; lenses (including

contact lenses ), prisms, mirrors and other

optical elements, of any material,unmounted, other than such elements ofglass not optically worked.

- Optical fibres, optical fibre bundles andcables

- Sheets and plates of polarising material

- Contact lenses

- Spectacle lenses of glass

- Spectacle lenses of other materials

- Other

Lenses, prisms, mirrors and other optical

elements, of any material, mounted, being

parts of or fittings for instruments or

apparatus, other than such elements of

glass not optically worked.

- Objective lenses:

- - For cameras, projectors or photographicenlargers or reducers

- Other

- Filters

- Other

Frames and mountings for spectacles,

goggles or the like, and parts thereof.

- Frames and mountings:

- - Of plastics

- - Of other materials

- Parts

Spectacles, goggles and the like, corrective,

protective or other.

- Sunglasses

- Other

469

HeadingNo.

90.05

90.06

H.S.Code

9005.10

9005.80

9005.90

9006.10

9006.20

9006.30

9006.40

9006.51

9006.52

9006.53

9006.59

9006.61

9006.62

9006.69

Binoculars , monoculars , other opticaltelescopes , and mountings therefor; otherastronomical instruments and mountingstherefor, but not including instruments forradio-astronomy.

- Binoculars

- Other instruments

- Parts and accessories (includingmountings)

Photographic (other than cinematographic)cameras; photographic flashlight apparatusand flashbulbs other than discharge lampsof heading No. 85.39.

- Cameras of a kind used for preparingprinting plates or cylinders

- Cameras of a kind used for recordingdocuments on microfilm, microfiche orother microforms

- Cameras specially designed forunderwater use, for aerial survey or formedical or surgical examination ofinternal organs; comparison cameras forforensic or criminological purposes

- Instant print cameras

- Other cameras:

- With a through-the-lens viewfinder(single lens reflex (SLR)), for roll filmof a width not exceeding 35 mm

- - Other, for roll film of a width less than35 mm

- - Other, for roll film of a width of 35 mm

- - Other

- Photographic flashlight apparatus andflashbulbs:

- - Discharge lamp ("electronic") flashlightapparatus

- - Flashbulbs, flashcubes and the like

- - Other

- Parts and accessories:

470

HeadingNo.

90.07

90.08

90.09

H.S.Code

9006.91

9006.99

9007.11

9007.19

9007.21

9007.29

9007.9 1

9007.92

9008.10

9008.20

9008.30

9008.40

9008.90

9009.11

9009.12

For cameras

- Other

Cinematographic cameras and projectors,whether or not incorporating soundrecording or reproducing apparatus.

Cameras:

- For film of less than 16 mm width orfor double-8 mm film

- Other

Projectors:

- For film of less than 16 mm width

- Other

Parts and accessories:

For cameras

For projectors

Image projectors, other thancinematographic ; photographic (other thancinematographic ) enlargers and reducers.

- Slide projectors

- Microfilm, microfiche or other microformreaders, whether or not capable ofproducing copies

- Other image projectors

- Photographic (other thancinematographic) enlargers and reducers

- Parts and accessories

Photo-copying apparatus incorporating anoptical system or of the contact type andthermo-copying apparatus.

- Electrostatic photo-copying apparatus:

- - Operating by reproducing the originalimage directly onto the copy (directprocess)

Operating by reproducing the originalimage via an intermediate onto the copy(indirect process)

- Other photo-copying apparatus:

471

HeadingNo.

90.10

90.11

90.12

H.S.Code

9009.21

9009.22

9009.30

9009.90

9010.10

9010.20

9010.30

9010.90

9011.10

9011.20

9011.80

9011.90

9012.10

9012.90

- - Incorporating an optical system

- - Of the contact type

Thermo-copying apparatus

- Parts and accessories

Apparatus and equipment for photographic(including cinematographic) laboratories(including apparatus for the projection ofcircuit patterns on sensitised semi-conductor materials ), not specified orincluded elsewhere in this Chapter;negatoscopes; projection screens.

- Apparatus and equipment forautomatically developing photographic(including cinematographic) film or paperin rolls or for automatically exposingdeveloped film to rolls of photographicpaper

- Other apparatus and equipment forphotographic (including cinematographic)laboratories; negatoscopes

- Projection screens

- Parts and accessories

Compound optical miscroscopes , includingthose for microphotography,microcinematography or microprojection.

- Stereoscopic microscopes

- Other microscopes, formicrophotography, microcinematographyor microprojection

- Other microscopes

- Parts and accessories

Microscopes other than opticalmicroscopes; diffraction apparatus.

- Microscopes other than opticalmicroscopes and diffraction apparatus

- Parts and accessories

472

D

HeadingNo.

90.13

90.14

90.15

90.16

H.S.Code

9013.10

9013.20

9013.80

9013.90

9014.10

9014.20

9014.80

9014.90

9015.10

9015.20

9015.30

9015.40

9015.80

9015.90

9016.00

Liquid crystal devices not constitutingarticles provided for more specifically inother headings ; lasers, other than laserdiodes; other optical appliances andinstruments , not specified or includedelsewhere in this Chapter.

- Telescopic sights for fitting to arms;periscopes; telescopes designed to formparts of machines, appliances,instruments or apparatus of this Chapteror section XVI.

Lasers, other than laser diodes

- Other devices, appliances and instruments

- Parts and accessories

Direction finding compasses; othernavigational instruments and appliances.

- Direction finding compasses

- Instruments and appliances foraeronautical or space navigation (otherthan compasses)

- Other instruments and appliances

- Parts and accessories

Surveying (including photogrammaticalsurveying), hydrographic, oceanographic,hydrological, meteorological or geophysicalinstruments and appliances , excludingcompasses ; rangefinders.

- Rangefinders

- Theodolites and tacheometers

- Levels

- Photogrammetrical surveying instrumentsand appliances

- Other instruments and appliances

- Parts and accessories

Balances of a sensitivity of 5 cg or better,with or without weights.

473

HeadingNo.

90.17

90.18

H.S.Code

9017.10

9017.20

9017.30

9017.80

9017.90

9018.11

9018.19

90 1 8.20

9018.31

9018.32

9018.39

9018.41

9018.49

Drawing, marking-out or mathematicalcalculating instruments (for example,drafting machines , pantographs,protractors , drawing sets, slide rules, disccalculators ); instruments for measuringlength, for use in the hand (for example,measuring rods and tapes , micrometers,callipers), not specified or includedelsewhere in this Chapter.

- Drafting tables and machines, whether ornot automatic

- Other drawing, marking-out ormathematical calculating instruments

- Micrometers, callipers and gauges

- Other instruments

- Parts and accessories

Instruments and appliances used in medical,surgical, dental or veterinary sciences,including scintigraphic apparatus, otherelectro-medical apparatus and sight-testinginstruments.

Electro-diagnostic apparatus (includingapparatus for functional exploratoryexamination or for checking physiologicalparameters):

Electro-cardiographs

Other

- Ultra-violet or infra-red ray apparatus

- Syringes, needles, catheters. cannulae andthe like:

Syringes, with or without needles

- Tubular metal needles and needles forsutures

- - Other

- Other instruments and appliances, usedin dental sciences:

- - Dental drill engines, whether or notcombined on a single base with otherdental equipment

- - Other

474

I

HeadingNo.

90.19

90.20

90.21

H.S.Code

9018.50

9018.90

9019.10

90 1 9.20

9020.00

9021.11

9021.19

9021.21

9021.29

9021.30

9021.40

9021.50

9021.90

- Other ophthalmic instruments andappliances

- Other instruments and appliances

Mechano-therapy appliances ; massageapparatus ; psychological aptitude-testingapparatus; ozone therapy, oxygen therapy,aerosol therapy, artificial respiration orother therapeutic respiration apparatus.

- Mechano-therapy appliances; massageapparatus; psychological aptitude-testingapparatus

- Ozone therapy, oxygen therapy, aerosoltherapy, artificial respiration or othertherapeutic respiration apparatus

Other breathing appliances and gas masks,excluding protective masks having neithermechanical parts not replaceable filters.

Orthopaedic appliances , including crutches,surgical belts and trusses; splints and otherfracture appliances; artificial parts of thebody; hearing aids and other applianceswhich are worn or carried , or implanted inthe body, to compensate for a defect ordisability.

Artificial joints and other orthopaedic orfracture appliances:

- Artificial joints

- - Other

Artificial teeth and dental fittings:

- Artificial teeth

- Other

Other artificial parts of the body

Hearing aids, excluding parts andaccessories

Pacemakers for stimulating heart muscles,excluding parts and accessories

Other

475

,ti

HeadingNo.

90.22

90.23

90.24

H.S.Code

9022.11

9022.19

9022.21

9022.29

9022.30

9022.90

9023.00

9024.10

9024.80

9024.90

Apparatus based on the use of X-rays or ofalpha, beta or gamma radiations, whetheror not for medical, surgical, dental orveterinary uses, including radiography orradiotherapy apparatus, X-ray tubes andother X-ray generators , high tensiongenerators , control panels and desks,screens, examination or treatment tables,chairs and the like.

- Apparatus based on the use of X-rays,whether or not for medical, surgical,dental or veterinary uses, includingradiography or radiotherapy apparatus:

- For medical, surgical, dental orveterinary uses

- - For other uses

Apparatus based on the use of alpha,beta or gamma radiations, whether or notfor medical, surgical, dental or veterinaryuses, including radiography orradiotherapy apparatus:

- For medical, surgical, dental orveterinary uses

- - For other uses

- X-ray tubes

- Other, including parts and accessories

Instruments, apparatus and models,designed for demonstrational purposes (forexample, in education or exhibitions),unsuitable for other uses.

Machines and appliances for testing thehardness, strength, compressibility,elasticity or other mechanical properties ofmaterials (for example, metals, wood,textiles, paper, plastics).

- Machines and appliances for testingmetals

Other machines and appliances

Parts and accessories

476

HeadingNo.

90.25

90.26

90.27

H.S.Code

9025.11

9025.19

9025.20

9025.80

9025.90

9026.10

9026.20

9026.80

9026.90

9027.10

9027.20

9027.30

Hydrometers and similar floatinginstruments, thermometers, pyrometers,barometers, hygrometers andpsychrometers, recording or not, and anycombination of these instruments.

Thermometers, not combined with otherinstruments:

- - Liquid-filled, for direct reading

- - Other

Barometers, not combined with otherinstruments

- Other instruments

Parts and accessories

Instruments and apparatus for measuring orchecking the flow, level, pressure or othervariables of liquids or gases (for example,flow meters, level gauges , manometers, heatmeters), excluding instruments andapparatus of heading No. 90.14, 90.15,90.28 or 90.32.

- For measuring or checking the flow orlevel of liquids

- For measuring or checking pressure

- Other instruments or apparatus

- Parts and accessories

Instruments and apparatus for physical orchemical analysis (for example,polarimeters, refractometers , spectrometers,gas or smoke analysis apparatus);instruments and apparatus for measuring orchecking viscosity, porosity, expansion,surface tension or the like; instruments andapparatus for measuring or checkingquantities of heat, sound or light (includingexposure meters); microtomes.

- Gas or smoke analysis apparatus

- Chromatographs and electrophoresisinstruments

- Spectrometers, spectrophotometers andspectrographs using optical radiations(UV, visible, IR)

477

HeadingNo.

90.28

90.29

90.30

H.S.Code

9027.40

9027.50

9027.80

9027.90

9028.10

9028.20

9028.30

9028.90

9029.10

9029.20

9029.90

9030.10

9030.20

Exposure meters

Other instruments and apparatus usingoptical radiations (UV, visible, IR)

Other instruments and apparatus

Microtomes ; parts and accessories

Gas, liquid or electricity supply orproduction meters, including calibratingmeters therefor.

- Gas meters

- Liquid meters

- Electricity meters

- Parts and accessories

Revolution counters, production counters,taximeters, mileometers, pedometers andthe like; speed indicators and tachometers,other than those of heading No. 90.15;stroboscopes.

- Revolution counters, production counters,taximeters, mileometers, pedometers andthe like

Speed indicators and tachometers;stroboscopes

Parts and accessories

Oscilloscopes , spectrum analysers andother instruments and apparatus formeasuring or checking electrical quantities,excluding meters of heading No. 90.28;instruments and apparatus for measuring ordetecting alpha, beta, gamma, X-ray,cosmic or other ionising radiations.

- Instruments and apparatus for measuringor detecting ionising radiations

- Cathode-ray oscilloscopes and cathode-ray oscillographs

- Other instruments and apparatus, formeasuring or checking voltage, current,resistance or power, without a recordingdevice:

478

HeadingNo.

90.31

90.32

flr

9033

H.S.Code

9030.31

9030.39

9030.40

9030.81

9030.89

9030.90

9031.10

9031.20

9031.30

9031.40

9031.80

9031.90

9032.10

9032.20

9032.81

9032.89

9032.90

9033.00

- - Multimeters

- - Other

- Other instruments and apparatus,specially designed for telecommunications(for example, cross-talk meters, gainmeasuring instruments , distortion factormeters, psophometers)

- Other instruments and apparatus:

- - With a recording device

- - Other

- Parts and accessories

Measuring or checking instruments,appliances and machines, not specified orincluded elsewhere in this Chapter, profileprojectors.

- Machines for balancing mechanical parts

- Test benches

- Profile projectors

- Other optical instruments and appliances

- Other instruments, appliances andmachines

- Parts and accessories

Automatic regulating or controllinginstruments and apparatus.

- Thermostats

- Manostats

- Other instruments and apparatus:

- - Hydraulic or pneumatic

- - Other

- Parts and accessories

Parts and accessories (not specified orincluded elsewhere in this Chapter) formachines, appliances , instruments orapparatus of Chapter 90

479

CHAPTER 91

Notes.

Clocks and watches and parts thereof

I.- This Chapter does not cover:

(a) Clock or watch glasses or weights (classified according to theirconstituent material);

(b) Watch chains (heading No. 71.13 or 71.17, as the case may be);

(c) Parts of general use defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39) or of preciousmetal or metal clad with precious metal (generally heading No. 71.15);clock or watch springs are, however, to be classified as clock or watchparts (heading No. 91.14);

(d) Bearing balls (heading No. 73.26 or 84.82, as the case may be);

(e) Articles of heading No. 84.12 constructed to work without anescapement;

(f) Ball bearings (heading No. 84.82); or

(g) Articles of Chapter 85, not yet assembled together or with othercomponents into watch or clock movements or into articles suitable foruse solely or principally as parts of such movements (Chapter 85).

2.- Heading No. 91.01 covers only watches with case wholly of precious metalor of metal clad with precious metal, or of the same materials combinedwith natural or cultured pearls , or precious or semi-precious stones (natural,synthetic or reconstructed ) of headings Nos. 71.01 to 71.04. Watches withcase of base metal inlaid with precious metal fall in heading No. 91.02.

3.- For the purposes of this Chapter, the expression "watch movements" meansdevices regulated by a balance-wheel and hairspring, quartz crystal or anyother system capable of determining intervals of time, with a display or asystem to which a mechanical display can be incorporated. Such watchmovements shall not exceed 12 mm in thickness and 50 mm in width, lengthor diameter.

4.- Except as provided in Note 1, movements and other parts suitable for useboth in clocks or watches and in other articles (for example, precisioninstruments) are to be classified in this Chapter.

HeadingNo.

91.01

H.S.Code

Wrist-watches, pocket-watches and otherwatches, including stop-watches, with caseof precious metal or of metal clad withprecious metal.

480

HeadingNo.

91.02

91.03

91.04

186137 2H

H.S.Code

9101.11

9101.12

9101.19

9101.21

9101.29

9101.91

9101.99

9102.11

9102.12

9102.19

9102.21

9102.29

9102.91

9102.99

9103.10

9103.90

9104.00

- Wrist-watches, battery or accumulatorpowered, whether or not incorporating astop-watch facility:

With mechanical display only

- - With opto-electronic display only

- - Other

Other wrist-watches, whether or notincorporating a stop-watch facility:

- With automatic winding

- - Other

- Other:

- Battery or accumulator powered

- - Other

Wrist-watches, pocket-watches and otherwatches, including stop-watches, other thanthose of heading No. 91.01.

- Wrist-watches, battery or accumulatorpowered, whether or not incorporating astop-watch facility:

- - With mechanical display only

With opto-electronic display only

- - Other

- Other wrist-watches, whether or notincorporating a stop-watch facility:

- - With automatic winding

- - Other

Other:

- - Battery or accumulator powered

- - Other

Clocks with watch movements, excludingclocks of heading No. 91.04.

- Battery or accumulator powered

- Other

Instrument panel clocks and clocks of asimilar type for vehicles, aircraft, spacecraftor vessels.

481

HeadingNo.

91.05

91.06

91.07

91.08

H.S.Code

9105.11

9105.19

9105.21

9105.29

9105.91

9105.99

9106.10

9106.20

9106.90

9107.00

9108.11

9108.12

9108.19

9108.20

9108.91

9108.99

Other clocks.

- Alarm clocks:

- - Battery, accumulator or mains powered

- - Other

- Wall clocks:

- - Battery, accumulator or mains powered

- - Other

- Other:

- - Battery, accumulator or mains powered

- - Other

Time of the day recording apparatus andapparatus for measuring, recording orotherwise indicating intervals of time, withclock or watch movement or withsynchronous motor (for example, time-registers, time-recorders).

- Time-registers; time-recorders

- Parking meters

- Other

Time switches with clock or watchmovement or with synchronous motor.

Watch movements, complete andassembled.

- Battery or accumulator powered:

- - With mechanical display only or with adevice to which a mechanical displaycan be incorporated

- - With opto-electronic display only

- - Other

- With automatic winding

- Other:

- -. Measuring 33.8 mm or less

- - Other

482

HeadingNo.

91.09

91.10

91.11

91.12

91.13

H.S.Code

9109.11

9109.19

9109.90

9110.11

9110.12

9110.19

9110.90

9111.10

9111.20

9111.80

9111.90

9112.10

9112.80

9112.90

9113.10

9113.20

Clock movements, complete and assembled.

- Battery, accumulator or mains powered:

- - Of alarm clocks

- - Other

- Other

Complete watch or clock movements,unassembled or partly assembled(movement sets); incomplete watch or clockmovements, assembled; rough watch orclock movements.

- Of watches:

- - Complete movements, unassembled orpartly assembled (movement sets)

- Incomplete movements, assembled

- - Rough movements

- Other

Watch cases and parts thereof.

- Cases of precious metal or of metal cladwith precious metal

- Cases of base metal, whether or not gold-or silver-plated

- Other cases

- Parts

Clock cases and cases of a similar type forother goods of this Chapter, and partsthereof.

- Cases of metal

- Other cases

- Parts

Watch straps, watch bands and watchbracelets , and parts thereof.

- Of precious metal or of metal clad withprecious metal

- Of base metal, whether or not gold- orsilver-plated

483

HeadingNo.

91.14

U.S.Code

9113.90

9114.10

9114.20

9114.30

9114.40

9114.90

- Other

Other clock or watch parts.

- Springs, including hair-springs

- Jewels

- Dials

- Plates and bridges

- Other

484

CHAPTER 92

Musical instruments;parts and accessories of such articles

Notes.

l.- This Chapter does not cover:

(a) Parts of general use, as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39);

(b) Microphones, amplifiers, loud-speakers, head-phones, switches, strobo-scopes or other accessory instruments, apparatus or equipment ofChapter 85 or 90. for use with but not incorporated in or. housed in thesame cabinet as instruments of this Chapter;

(c) Toy instruments or apparatus (heading No. 95.03);

(d) Brushes for cleaning musical instruments (heading No. 96.03);

(e) Collectors' pieces or antiques (heading No. 97.05 or 97.06); or

(f) Spools, reels or similar supports (which are to be classified according totheir constituent material: for example, heading No. 39.24, Section XV).

2.- Bows and sticks and similar devices used in playing the musical instrumentsof heading No. 92.02 or 92.06 presented with such instruments in numbersnormal thereto and clearly intended for use therewith, are to be classified in

the same heading as the relative instruments.

Cards, discs and rolls of heading No. 92.09 presented with aninstrument are to be treated as separate articles and not as forming a part ofsuch instrument.

HeadingNo.

H.S.Code

92.01

9201.10

9201.20

9201.90

92.02

9202.10

9202.90

92.03 9203.00

Pianos, including automatic pianos;harpsichords and other keyboard stringedinstruments.

Upright pianos

Grand pianos

Other

Other string musical instruments (forexample, guitars , violins, harps).

- Played with a bow

- Other

Keyboard pipe organs; harmoniums andsimilar keyboard instruments with freemetal reeds.

485

SECTION XIX

Arms and ammunition; parts and accessories thereof

CHAPTER 93

Arms and ammunition ; parts and accessories thereof

Notes.

I.- This Chapter does not cover:

(a) Goods of Chapter 36 (for example , percussion caps, detonators,signalling flares),

(b) Parts of general use , as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39):

(c) Armoured fighting vehicles ( heading No. 87.10);

(d) Telescopic sights or other optical devices suitable for use with arms,unless mounted on a firearm or presented with the firearm on whichthey are designed to be mounted (Chapter 90);

(e) Bows, arrows, fencing foils or toys (Chapter 95); or

(f) Collectors' pieces or antiques ( heading No. 97.05 or 97.06).

2.- In heading No. 93.06, the reference to "parts thereof" does not includeradio or radar apparatus of heading No. 85.26.

HeadingNo.

H.S.Code

93.01 9301.00

93.02 9302.00

93.03

9303.10

9303.20

Military weapons, other than revolvers,pistols and arms of heading No. 93.07.

Revolvers and pistols , other than those ofheading No. 93.03 or 93.04.

Other firearms and similar devices whichoperate by the firing of an explosive charge(for example, sporting shotguns and rifles,muzzle-loading firearms , Very pistols andother devices designed to project onlysignal flares , pistols and revolvers for firingblank ammunition, captive-bolt humanekillers, line-throwing guns).

- Muzzle-loading firearms

- Other sporting, hunting or target-shootingshotguns, including combination shotgun-rifles

488

HeadingNo.

93.04

93.05

93.06

93.07

186137 21

H.S.Code

9303.30

9303.90

9304.00

9305.10

9305.21

9305.29

9305.90

9306.10

9306.21

9306.29

9306.30

9306.90

9307.00

- Other sporting, hunting or target-shootingrifles

- Other

Other arms (for example, spring, air or gasguns and pistols , truncheons ), excludingthose of heading No. 93.07.

Parts and accessories of articles ofheadings Nos. 93.01 to 93.04.

- Of revolvers or pistols

- Of shotguns or rifles of heading No.93.03:

- Shotgun barrels

Other

Other

Bombs, grenades, torpedoes , mines,missiles, and similar munitions of war andparts thereof; cartridges and otherammunition and projectiles and partsthereof, including shot and cartridge wads.

- Cartridges for riveting or similar tools or

for captive-bolt humane killers and parts

thereof

- Shotgun cartridges and parts thereof; air

gun pellets:

Cartridges

Other

- Other cartridges and parts thereof

- Other

Swords, cutlasses , bayonets , lances andsimilar arms and parts thereof andscabbards and sheaths therefor.

489

SECTION XX

Miscellaneous manufactured articles

CHAPTER 94

Furniture ; bedding, mattresses , mattress supports,cushions and similar stuffed furnishings ; lamps and

lighting fittings, not elsewhere specified or included ; illuminated signs,illuminated name-plates and the like; prefabricated buildings

Notes.

1.- This Chapter does not cover:

(a) Pneumatic or water mattresses , pillows or cushions , of Chapter 39, 40 or63;

(b) Minors designed for placing on the floor or ground (for example,cheval-glasses (swing-mirrors)) of heading No. 70.09;

(c) Articles of Chapter 71;

(d) Parts of general use as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39), or safes ofheading No. 83.03;

(e) Furniture specially designed as parts of refrigerators of heading No.84.18; furniture specially designed for sewing machines (heading No.84.52);

(f) Lamps or lighting fittings of Chapter 85;

(g) Furniture specially designed as parts of apparatus of heading No. 85.18(heading No. 85.18), of headings Nos. 85.19 to 85.21 (heading No. 85.22)or of headings Nos. 85.25 to 85.28 (heading No. 85.29);

(h) Articles of heading No. 87.14;

(ij) Dentists' chairs incorporating dental appliances of heading No. 90.18 ordentists' spittoons (heading No. 90.18);

(k) Articles of Chapter 91 (for example, clocks and clock cases); or

(1) Toy furniture or toy lamps or lighting fittings (heading No. 95.03),billiard tables or other furniture specially constructed for games(heading No. 95.04), furniture for conjuring tricks or decorations (otherthan electric garlands) such as Chinese lanterns (heading No. 95.05).

2.- The articles (other than parts) referred to in headings Nos. 94.01 to 94.03are to be classified in those headings only if they are designed for placing onthe floor or ground.

The following are, however, to be classified in the above-mentionedheadings even if they are designed to be hung, to be fixed to the wall or tostand one on the other:

490

(a) Cupboards, bookcases, other shelved furniture and unit furniture;

(b) Seats and beds.

3.- (a) In headings Nos. 94.01 to 94.03 references to parts of goods do notinclude references to sheets or slabs (whether or not cut to shape but notcombined with other parts) of glass (including mirrors), marble or otherstone or of any other material referred to in Chapter 68 or 69.

(b) Goods described in heading No. 94.04, presented separately, are not tobe classified in heading No. 94.01, 94.02 or 94.03 as parts of goods.

4.- For the purposes of heading No. 94.06, the expression "prefabricatedbuildings" means buildings which are finished in the factory or put up aselements , presented together, to be assembled on site, such as housing orworksite accommodation, offices, schools, shops, sheds, garages or similarbuildings.

HeadingNo.

94.01

H.S.Code

9401.10

9401.20

9401.30

9401.40

9401.50

9401.61

9401.69

9401.71

9401.79

9401.80

9401.90

Seats (other than those of heading No.94.02 ), whether or not convertible into beds,and parts thereof.

- Seats of a.kind used for aircraft

- Seats of a kind used for motor vehicles

- Swivel seats with variable heightadjustment

- Seats other than garden seats or campingequipment, convertible into beds

- Seats of cane, osier, bamboo or similarmaterials

- Other seats, with wooden frames:

- - Upholstered

- - Other

Other seats, with metal frames:

Upholstered

Other

- Other seats

Parts

491

HeadingNo.

94.02

94.03

94.04

H.S.Code

9402.10

9402.90

9403.10

9403.20

9403.30

9403.40

9403.50

9403.60

9403.70

9403.80

9403.90

9404.10

9404.21

9404.29

9404.30

Medical , surgical , dental or veterinaryfurniture (for example, operating tables,examination tables, hospital beds withmechanical fittings, dentists' chairs);barbers' chairs and similar chairs , havingrotating as well as both reclining andelevating movements; parts of the foregoingarticles.

- Dentists'_ barbers' or similar chairs andparts thereof

- Other

Other furniture and parts thereof.

- Metal furniture of a kind used in offices

- Other metal furniture

Wooden furniture of a kind used inoffices

Wooden furniture of a kind used in thekitchen

Wooden furniture of a kind used in thebedroom

Other wooden furniture

Furniture of plastics

Furniture of other materials, includingcane, osier, bamboo or similar materials

Parts

Mattress supports; articles of bedding andsimilar furnishing (for example, mattresses,quilts, eiderdowns, cushions , pouffes andpillows) fitted with springs or stuffed orinternally fitted with any material or ofcellular rubber or plastics, whether or notcovered.

- Mattress supports

- Mattresses:

- - Of cellular rubber or plastics, whetheror not covered

- -. Of other materials

- Sleeping bags

492

HeadingNo.

94.05

94.06

186137 2K

H.S.Code

9404.90

9405.10

9405.20

9405.30

9405.40

9405.50

9405.60

9405.91

9405.92

9405.99

9406.00

- Other

Lamps and lighting fittings includingsearchlights and spotlights and partsthereof, not elsewhere specified or included;illuminated signs, illuminated name-platesand the like, having a permanently fixedlight source, and parts thereof notelsewhere specified or included.

- Chandeliers and other electric ceiling orwall lighting fittings, excluding those of akind used for lighting public open spacesor thorough-fares

- Electric table, desk, bedside or floor-standing lamps

- Lighting sets of a kind used forChristmas trees

- Other electric lamps and lighting fittings

- Non-electrical lamps and lighting fittings

- Illuminated signs , illuminatedplates and the like

- Parts:

- - Of glass

- - Of plastics

- Other

Prefabricated buildings.

493

name-

CHAPTER 95

Toys, games and sports requisites;parts and accessories thereof

Notes.

1.- This Chapter does not cover:

(a) Christmas tree candles (heading No. 34.06);

(b) Fireworks or other pyrotechnic articles of heading No. 36.04;

(c) Yams, monofilament, cords or gut or the like for fishing, cut to lengthbut not made up into fishing lines, of Chapter 39, heading No. 42.06 ofSection XI;

(d) Sports bags or other containers of heading No. 42.02, 43.03 or 43.04;

(e) Sports clothing or fancy dress, of textiles, of Chapter 61 or 62;

(f) Textile flags or bunting, or sails for boats, sailboards or land craft, ofChapter 63;

(g) Sports footwear (other than skating boots with ice or roller skatesattached) of Chapter 64, or sports headgear of Chapter 65;

(h) Walking sticks, whips, riding-crops or the like (heading No. 66.02), orparts thereof (heading No. 66.03);

(ij) Unmounted glass eyes for dolls or other toys, of heading No. 70.18;

(k) Parts of general use, as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39);

(1) Bells, gongs or the like of heading No. 83.06;

(m) Electric motors (heading No. 85.01), electric transformers (heading No.85.04) or radio remote control aparatus (heading No. 85.26);

(n) Sports vehicles (other than bobsleighs, toboggans and the like) ofSection XVII;

(o) Children's bicycles (heading No. 87.12);

(p) Sports craft such as canoes and skiffs (Chapter 89), or their means ofpropulsion (Chapter 44 for such articles made of wood);

(q) Spectacles, goggles or the like, for sports or outdoor games (heading No.90.04);

(r) Decoy calls or whistles (heading No. 92.08);

(s) Arms or other articles of Chapter 93;

(t) Electric garlands of all kinds (heading No. 94.05); or

(u) Racket strings, tents or other camping goods, or gloves (classifiedaccording to their constituent material).

494

2.- This Chapter includes articles in which natural or cultured pearls, precious

or semi-precious stones (natural, synthetic or reconstructed), precious metalor metal clad with precious metal constitute only minor constituents.

3.- Subject to Note 1 above, parts and accessories which are suitable for usesolely or principally with articles of this Chapter are to be classified withthose articles.

HeadingNo.

95.01

95.02

95.03

186137 2K2

H.S.Code

9501.00

9502.10

9502.91

9502.99

9503.10

9503.20

9503.30

9503.41

9503.49

9503.50

9503.60

9503.70

9503.80

9503.90

Wheeled toys designed to be ridden bychildren (for example, tricycles, scooters,pedal cars); dolls' carriages.

Dolls representing only human beings.

- Dolls, whether or not dressed

- Parts and accessories:

- - Garments and accessories therefor,footwear and headgear

- - Other

Other toys; reduced-size ("scale") modelsand similar recreational models, working ornot; puzzles of all kinds.

- Electric trains, including tracks, signalsand other accessories therefor

- Reduced-size ("scale") model assemblykits, whether or not working models,excluding those of subheading No.9503.10

- Other construction sets and constructionaltoys

- Toys representing animals or non-humancreatures:

- Stuffed

- - Other

Toy musical instruments and apparatus

Puzzles

Other toys, put up in sets or outfits

- Other toys and models , incorporating amotor

Other

495

HeadingNo.

95.04

95.05

95.06

H.S.Code

9504.10

9504.20

9504.30

9504.40

9504.90

9505.10

9505.90

9506.11

9506.12

9506.19

9506.21

9506.29

9506.31

9506.32

9506.39

9506.40

Articles for funfair, table or parlour games,including pintables, billiards, special tablesfor casino games and automatic bowlingalley equipment.

- Video games of a kind used with atelevision receiver

- Articles and accessories for billiards

- Other games, coin- or disc-operated,other than bowling alley equipment

- Playing cards

- Other

Festive, carnival or other entertainmentarticles, including conjuring tricks andnovelty jokes.

- Articles for Christmas festivities

- Other

Articles and equipment for gymnastics,athletics, other sports (including table-tennis) or outdoor games, not specified orincluded elsewhere in this Chapter;swimming pools and paddling pools.

- Snow-skis and other snow-ski equipment:

- - Skis

- - Ski-fastenings (ski-bindings)

- - Other

Water-skis, surf-boards, sailboards andother water-sport equipment:

- - Sailboards

- - Other

Golf clubs and other golf equipment:

- Clubs, complete

- Balls

- - Other

- Articles and equipment for table-tennis

Tennis, badminton or similar rackets,whether or not strung:

496

HeadingNo.

95.07

95.08

H.S.Code

9506.51

9506.59

9506.61

9506.62

9506.69

9506.70

9506.91

9506.99

9507.10

9507.20

9507.30

9507.90

9508.00

Lawn-tennis rackets, whether or notstrung

Other

Balls, other than golf balls and table-tennis balls:

Lawn-tennis balls

Inflatable

Other

Ice skates and roller skates, includingskating boots with skates attached

Other:

Gymnasium or athletics articles andequipment

- - Other

Fishing rods, fish-hooks and other linefishing tackle; fish landing nets, butterflynets and similar nets; decoy "birds" (otherthan those of heading No. 92.08 or 97.05)and similar hunting or shooting requisites.

- Fishing rods

- Fish-hooks. whether or not snelled

- Fishing reels

- Other

Roundabouts , swings, shooting galleries andother fairground amusements ; travellingcircuses, travelling menageries andtravelling theatres.

497

CHAPTER 96

Miscellaneous manufactured articles

Notes.

1.- This Chapter does not cover:

(a) Pencils for cosmetic or toilet uses (Chapter 33);

(b) Articles of Chapter 66 (for example, parts of umbrellas or walking-sticks);

(c) Imitation jewellery (heading No. 71.17);

(d) Parts of general use, as defined in Note 2 to Section XV, of base metal(Section XV), or similar goods of plastics (Chapter 39);

(e) Cutlery or other articles of Chapter 82 with handles or other parts ofcarving or moulding materials ; heading No. 96.01 or 96.02 applies,however, to separately presented handles or other parts of such articles;

(f) Articles of Chapter 90 (for example , spectacle frames (heading No.90.03), mathematical drawing pens (heading No. 90.17), brushes of akind specialised for use in dentistry or for medical, surgical or veterinarypurposes (heading No. 90.18));

(g) Articles of Chapter 91 (for example, clock or watch cases);

(h) Musical instruments or parts or accessories thereof (Chapter 92);

(ij) Articles of Chapter 93 (arms and parts thereof);

(k) Articles of Chapter 94 (for example , furniture , lamps and lightingfittings);

(1) Articles of Chapter 95 (toys, games, sports requisites); or

(m) Works of art, collectors ' pieces or antiques (Chapter 97).

2.- In heading No. 96.02 the expression "vegetable or mineral carvingmaterial" means:

(a) Hard seeds, pips, hulls and nuts and similar vegetable materials of akind used for carving (for example, corozo and dom);

(b) Amber, meerschaum, agglomerated amber and agglomerated meer-schaum, jet and mineral substitutes for jet.

3.- In heading No. 96.03 the expression "prepared knots and tufts for broom orbrush making" applies only to unmounted knots and tufts of animal hair,vegetable fibre or other material, which are ready for incorporation withoutdivision in brooms or brushes, or which require only such further minorprocesses as trimming to shape at the top, to render them ready for suchincorporation.

4.- Articles of this Chapter, other than those of headings Nos. 96.01 to 96.06 or96.15, remain classified in the Chapter whether or not composed wholly or

498

partly of precious metal or metal clad with precious metal, of natural orcultured pearls, or precious or semi-precious stones (natural, synthetic orreconstructed). However, headings Nos. 96.01 to 96.06 and 96.15 includearticles in which natural or cultured pearls, precious or semi-precious stones(natural, synthetic or reconstructed), precious metal or metal clad withprecious metal constitute only minor constituents.

HeadingNo.

96.01

96.02

96.03

H.S.Code

9601.10

9601.90

9602.00

9603.10

9603.21

9603.29

9603.30

Worked ivory, bone, tortoise-shell, horn,antlers, coral, mother-of-pearl and otheranimal carving material, and articles ofthese materials (including articles obtainedby moulding).

- Worked ivory and articles of ivory

- Other

Worked vegetable or mineral carvingmaterial and articles of these materials;moulded or carved articles of wax, ofstearin, of natural gums or natural resins orof modelling pastes, and other moulded orcarved articles , not elsewhere specified orincluded; worked, unhardened gelatin(except gelatin of heading No. 35.03) andarticles of unhardened gelatin.

Brooms, brushes (including brushesconstituting parts of machines, appliancesor vehicles), hand-operated mechanical floorsweepers, not motorised, mops and featherdusters; prepared knots and tufts for broomor brush making; paint pads and rollers;squeegees (other than roller squeegees).

- Brooms and brushes, consisting of twigsor other vegetable materials boundtogether, with or without handles

- Tooth brushes, shaving brushes, hairbrushes, nail brushes, eyelash brushesand other toilet brushes for use on theperson, including such brushesconstituting parts of appliances:

- - Tooth brushes

- - Other

- Artists' brushes, writing brushes andsimilar brushes for the application ofcosmetics

499

HeadingNo.

96.04

96.05

96.06

96.07

96.08

H.S.Code

9603.40

9603.50

9603.90

9604.00

9605.00

9606.10

9606.21

9606.22

9606.29

9606.30

9607.11

9607.19

9607.20

9608.10

Paint, distemper, varnish or similarbrushes (other than brushes ofsubheading No. 9603.30); paint pads androllers

Other brushes constituting parts ofmachines, appliances or vehicles

Other

Hand sieves and hand riddles.

Travel sets for personal toilet, sewing orshoe or clothes cleaning.

Buttons, press-fasteners, snap-fasteners andpress-studs, button moulds and other partsof these articles ; button blanks.

- Press-fasteners, snap-fasteners and press-studs and parts therefor

- Buttons:

- Of plastics, not covered with textilematerial

- - Of base metal, not covered with textilematerial

Other

Button moulds and other parts ofbuttons; button blanks

Slide fasteners and parts thereof.

Slide fasteners:

Fitted with chain scoops of base metal

Other

Parts

Ball point pens; felt tipped and otherporous-tipped pens and markers ; fountainpens, stylograph pens and other pens;duplicating stylos; propelling or slidingpencils; pen-holders, pencil-holders andsimilar holders; parts (including caps andclips) of the foregoing articles, other thanthose of heading No. 96.09.

- Ball point pens

500

HeadingNo.

96.09

96.10

96.11

96.12

H.S.Code

9608.20

9608.31

9608.39

9608.40

9608.50

9608.60

9608.91

9608.99

9609.10

9609.20

9609.90

9610.00

9611.00

9612.10

9612.20

- Felt tipped and other porous-tipped pensand markers

Fountain pens, stylograph pens and otherpens:

- Indian ink drawing pens

- Other

- Propelling or sliding pencils

- Sets of articles from two or more of theforegoing subheadings

- Refills for ball point pens, comprising theball point and ink-reservoir

- Other:

- Pen nibs and nib points

- Other

Pencils (other than pencils of heading No.96.08), crayons, pencil leads, pastels,drawing charcoals, writing or drawingchalks and tailors' chalks.

- Pencils and crayons, with leads encasedin a rigid sheath

- Pencil leads , black or coloured

- Other

Slates and boards, with writing or drawingsurfaces, whether or not framed.

Date, sealing or numbering stamps, and thelike (including devices for printing orembossing labels), designed for operating inthe hand; hand-operated composing sticksand hand printing sets incorporating suchcomposing sticks. .

Typewriter or similar ribbons, inked orotherwise prepared for giving impressions,whether or not on spools or in cartridges;ink-pads, whether or not inked, with orwithout boxes.

- Ribbons

- Ink-pads

501

HeadingNo.

96.13

96.14

96.15

96.16

96.17

H.S.Code

9613.10

9613.20

9613.30

9613.80

9613.90

9614.10

9614.20

9614.90

9615.11

9615.19

9615.90

9616.10

9616.20

9617.00

Cigarette lighters and other lighters,whether or not mechanical or electrical,and parts thereof other than flints andwicks.

- Pocket lighters, gas fuelled, non-refillable

- Pocket lighters, gas fuelled, refillable

- Table lighters

- Other lighters

- Parts

Smoking pipes (including pipe bowls) andcigar or cigarette holders, and partsthereof.

- Roughly shaped blocks of wood or root,for the manufacture of pipes

- Pipes and pipe bowls

- Other

Combs, hair-slides and the like; hairpins,curling pins,- curling grips, hair-curlers andthe like, other than those of heading No.85.16, and parts thereof.

- Combs, hair-slides and the like:

- - Of hard rubber or plastics

- Other

- Other

Scent sprays and similar toilet sprays, andmounts and heads therefor, powder-puffsand pads for the application of cosmetics ortoilet preparations.

- Scent sprays and similar toilet sprays,and mounts and heads therefor

- Powder-puffs and pads for theapplication of cosmetics or toiletpreparations

Vacuum flasks and other vacuum vessels,complete with cases; parts thereof otherthan glass inners.

502

HeadingNo.

96.18

H.S.Code

9618.00 Tailors' dummies and other lay figures;automata and other animated displays usedfor shop window dressing.

503

4r

Notes.

SECTION XXI

Works of art, collectors ' pieces and antiques

CHAPTER 97

Works of art, collectors ' pieces and antiques

L- This Chapter does not cover:

(a) Unused postage or revenue stamps, postal stationery (stamped paper) orthe like, of current or new issue in the country to which they are destined(Chapter 49);

(b) Theatrical scenery, studio back-cloths or the like, of painted canvas(heading No. 59.07) except if they may be classified in heading No.97.06; or

(c) Pearls, natural or cultured , or precious or semi-precious stones( headings Nos. 71.0 1 to 71.03).

2.- For the purposes of heading No. 97.02, the expression "original engravings,prints and lithographs" means impressions produced directly, in black andwhite or in colour, of one or of several plates wholly executed by hand bythe artist, irrespective of the process or of the material employed by him,but not including any mechanical or photomechanical process.

3.- Heading No. 97. 03 does not apply to mass-produced reproductions orworks of conventional craftsmanship of a commercial character.

4.- (a) Subject to Notes l to 3 above, articles of this Chapter are to be classifiedin this Chapter and not in any other Chapter of the Nomenclature.

(b) Heading No. 97.06 does not apply to articles of the preceding headingsof this Chapter.

5.- Frames around paintings, drawings, pastels, collages or similar decorativeplaques, engravings, prints or lithographs are to be treated as forming partof those articles, provided they are of a kind and of a value normal to thosearticles.

HeadingNo.

97.01

H.S.Code

Paintings, drawings and pastels, executedentirely by hand, other than drawings ofheading No. 49.06 and other than hand-painted or hand-decorated manufacturedarticles; collages and similar decorativeplaques.

504

HeadingNo.

H.S.Code

9701.10

9701.90

97.02 9702.00

97.03 9703.00

97.04 9704.00

97.05 9705.00

97.06 9706.00

- Paintings , drawings and pastels

- Other

Original engravings, prints and lithographs.

Original sculptures and statuary, in anymaterial.

Postage or revenue stamps, stamp-postmarks, first-day covers, postalstationery (stamped paper), and the like,used, or if unused not of current or newissue in the country to which they aredestined.

Collections and collectors ' pieces ofzoological, botanical , mineralogical,anatomical , historical , archaeological,palaeontological , ethnographic ornumismatic interest.

Antiques of an age exceeding one hundredyears.

505

PROTOCOL

OF AMENDMENT TOTHE INTERNATIONAL CONVENTION ON THE HARMONIZED

COMMODITY DESCRIPTION AND CODING SYSTEM

(done at Brussels on 24 June 1986)

The Contracting Parties to the Convention establishing a CustomsCo-operation Council signed in Brussels on 15 December 19501 and theEuropean Economic Community,

Considering that it is desirable to bring the International Convention on theHarmonized Commodity Description and Coding System (done at Brussels on14 June 1983) into force on 1 January 1988,

Considering that , unless Article 13 of the said Convention is amended, theentry into force of the Convention on that date will remain uncertain,

Have agreed as follows:

ARTICLE I

Paragraph I of Article 13 of the International Convention on theHarmonized Commodity Description and Coding System done at Brussels on14 June 1983 (hereinafter referred to as " the Convention ") shall be replaced bythe following text:

1. This convention shall enter into force on the earliest first of January whichfalls at least three months after a minimum of seventeen States or Customsor Economic Unions referred to in Article 11 above have signed it withoutreservation of ratification or have deposited their instruments of ratificationor accession , but not before l January 1988."

ARTICLE 2

A. The present Protocol shall enter into force simultaneously with theConvention provided that a minimum of seventeen States or Customs orEconomic Unions referred to in Article 11 of the convention have depositedtheir instruments of acceptance of the Protocol with the Secretary Generalof the Customs Co-operation Council . However, no State or Customs orEconomic Union may deposit its instrument of acceptance of the presentProtocol unless it has previously signed or signs at the same time theConvention without reservation of ratification or has previously depositedor deposits at the same time its instrument of ratification of, or of accessionto the Convention.

B. Any state or Customs or Economic Union becoming a Contracting Party tothe Convention after the entry into force of the present Protocol underparagraph A above shall be a Contracting Party to the Convention asamended by the Protocol.

'Treaty Series No. 50 (1954). Cmd. 9232.

W

506

PROTOCOLOF AMENDMENT TO THE CONVENTION

ACCEPTANCES

State Date ofacceptance

Australia ... ... ... ... ... ... ... 22 Sept. 1987Austria ... ... ... ... ... ... ... ... 22 Sept. 1987Bangladesh * ... ... ... ... ... ... ... 22 Sept. 1987Belgium ... ... ... ... ... ... ... 22 Sept. 1987Botswana ... ... ... ... ... ... ... 13 Feb. 1987Cameroon ... ... ... ... ... ... ... 16 May 1988Canada ... ... ... ... ... ... ... ... 14 Dec. 1987Czechoslovakia ... ... ... ... ... ... 22 Apr. 1987Denmark ... ... ... ... ... ... ... 22 Sept. 1987European Economic Community ... ... ... ... 22 Sept. 1987Finland ... ... ... ... ... ... ... ... 22 Sept. 1987France ... ... ... ... ... ... ... ... 22 Sept 1987Germany, Federal Republic oft ... ... ... ... 22 Sept. 1987Iceland ... ... ... ... ... ... ... ... 20 Oct. 1987India ... ... ... ... ... ... ... ... 8 Dec. 1986Ireland , Republic of ... ... ... ... ... ... 22 Dec. 1987Israel ... ... ... ... ... ... ... ... 2 Oct. 1987Japan ... ... ... ... ... ... ... ... 22 June 1987Jordan ... ... ... ... ... ... ... ... 5 Mar. 1987Korea, Republic of ... ... ... ... ... ... 27 Nov. 1987Lesotho... ... ... ... ... ... ... ... 14 May 1987Madagascar ... ... ... ... ... ... ... 22 Dec. 1987Malaysia ... ... ... ... ... ... ... 17 Dec. 1987Mauritius ... ... ... ... ... ... ... 14 Apr. 1987Netherlands ... ... ... ... ... ... ... 22 Sept. 1987New Zealand ... ... ... ... ... ... ... 22 Sept. 1987Norway... ... ... ... ... ... ... ... 27 Aug. 1987Pakistan* ... ... ... ... ... ... ... 22 Sept. 1987Portugal ... ... ... ... ... ... ... 4 Nov. 1987South Africa ... ... ... ... 25 Nov. 1987Spain ... ... ... ... ... ... ... ... 28 Sept. 1987SriLanka ... ... ... ... ... ... ... 3 May 1988Swaziland ... ... ... ... ... ... ... 25 Aug. 1987Sweden ... ... ... ... ... ... ... ... 22 Sept. 1987Switzerland ... ... ... ... ... ... ... 22 Sept. 1987Tunisia ... ... ... ... ... ... ... ... 28 Oct. 1987United Kingdom$ ... ... ... ... ... ... 22 Sept. 1987Yugoslavia ... ... ... ... ... ... ... 10 Sept. 1987Zaire ... ... ... ... ... ... ... ... 10 Nov. 1987Zambia ... ... ... ... ... ... ... ... 25 Sept. 1987Zimbabwe ... ... ... ... ... ... ... 5 Nov. 1986

*The Governments of Bangladesh and Pakistan have specified that the Convention , as amendedby the Protocol, shall enter into force for the two Governments respectively on I July 1988.

tlncludes Berlin (West).

The United Kingdom instrument of acceptance was in respect of the United Kingdom of GreatBritain and Northern Ireland only. By a Notification deposited on 22 September 1987. the Protocolwas applied to the Bailiwicks of Jersey and Guernsey and the Isle of Man.

Printed by Her Majesty 's Stationery Office

Dd0901695 C8 7/89 3186137