Upload
amia-sweeney
View
212
Download
0
Tags:
Embed Size (px)
Citation preview
Head officeI - 33048 San Giovanni al Natisone UD
Via Antica 24/3
“Brianza” branchI - 20035 Lissone MI
Via Braille 5
Italian Laboratory and
Research Institute on wood and furniture
www.catas.com
SpA - Joint-stock Company
Where we are
Catas-Chile
- CHILECENTRO DE CONTROL DE CALIDAD DES MUEBLESRenca - Santiago de Chile (www.catas-chile.cl)
• Set up in 1996, as a private company without profit-making, to supply training, technical assistance, testing and research to the furniture Chilean companies.
• Catas SpA is a founder and a permanent member of Catas-Chile
• Catas SpA supplied all the know-how and the equipment for the Chilean laboratory and a periodic technical assistance
• Catas SpA gave Catas-Chile permission for the use of its registered mark
The CompanyRooms Organization chart
Capitale sociale - Share capital € 842.850,00
Regional Services Centre for SMI0,2%
Small & Medium Industry Association of Udine
0,3%
Italian Woodcraft Association0,5%
Italian Federation of Wood and Furniture Industries
16,0%
Industry Association of Udine10,0%
Cividale Bank10,0%
Industry Association of Monza and Brianza
0,5%
Chamber of Commerce of. Pordenone
2,1%
Chamber of Commerce of Udine59,8%
National Craft Confederation of Lombardia
0,4%
10-2004
1
1 1
21+2
21 3
7 8 3
1 3
Catas - Organization chart
Chemical dpt
Finished products
testing dpt
Raw material
testing dpt
Quality assurance & computer
programming
Product Certification, Reserch & Innovation
Secretary off.
Finished products
testing dpt
San Giovanni al Natisone Lissone
Accounts dpt
Surfaces testing dpt
Technical aids for disabled persons &
external blinds and shutters testing dpt
Fire ReactionMicrobiolocicalSection
Board of directors
Board
Chief Executive
Tests
0
5.000
10.000
15.000
20.000
25.000
Numero delle prove annue
totali 18.371 17.010 19.607 19.773 22.519 23.585
1999 2000 2001 2002 2003 2004
Prove per sezione - Tests for each dpt
superfici - surfaces25,9%
mobili - furniture49,2%
chimica - chemical12,4%
tessuti-textiles0,0%
fuoco - fire4,1%
meccanica - mechanical8,2%
microbiologia-microbiology
Mechanical tests Fire reaction
State's authorization
Raw materials testing dpt
equipments:Instron dinamometers (100kN & 200 kN),Charpy/Izod impact
apparatus,hardness test apparatus
materials:solid wood, panels, metals,
plastics, geotextiles, upholstery foams, belts, furniture components,
pallets, floors
equipments:small flame,radiant heating,
non combustibility
products:upholstery furniture, paints & varnishes , fabrics, solid
wood, panels, plastics, others.
10-2002
Chemical department
SurfacesFormaldehyde &
vocAnalytical
sectionDefects
equipments:1 m3 chambers, perforator, gas
analysis
products: wodden panels,
furniture, volatile organic
compound emissions,
product certification
equipments:infrared
spectroscopy with microscope and GC-FTIR,GC+
ECD, termal analysis,
atomic ads. spectroscopy, etc.
products: paints &
varnishes, thinners &
solvents, plastic materials, rubber,
physical and chemical testing,
etc
equipments:weather ometer,
fade ometer, QUV, natural weathering,
spectrofotometer (colorimeter),
salt fog chamber, climatest,
abrasion, shear, etc.
products: paints &
varnishes, plastic materials,
decorative plastic laminates, baths & shower trays, sinks, spectacles,
furniture components &
hardware
equipments:microscope, conditioning rooms, etc
products: paints &
varnishes, solid wood & wodden panels,decorative plastic laminates,
etc.
Sezione microbiologica
equipments:mould culture to
check efficiency of preservative treatments
products: solid wood with or
without preservatives,
mattrasses, textiles, etc.
Cabinets, tables, desks, beds, bunk
beds, children's
cots, cribs and cradles, ladders,
children's high chairs,
etc.
Domestic & contract
chairs; office chairs;
outdoor chairs & tables; ranked
seatings; etc
Mattresses
Finished products
Screens & internal walls
Technical aids for disabled
persons: rollators, hoists
for transfer, adjustable
beds, wheelchairs
External blinds &
shuttersole
Catas Members
500
600
700
800
900
1000
1100
Numero abbonati - Catas Members
n° abbonati 554 672 783 825 825 887 930 1.022 1092
1996 1997 1998 1999 2000 2001 2002 2003 2004
anno 2004 = 1092
Veneto29,1%
Friuli V.G.24,4%
Lombardia21,3%
Emilia R.5,5%
Marche
Piemonte
Toscana3,0%
Altre Italia4,3%
Estero2,6%
Lazio
Campania1,1%
Abruzzo1,6%
Accrediting&
Recognizing
ACCREDITINGS
• SINAL (Italian Laboratories Accreditation Body)
• TÜV PRODUCT SERVICE GERMANY
• TÜV RHEINALD GERMANY
• LGA GERMANY
• OTTO GRAF INSTITUT GERMANY
• IKEA SWEDEN
• ROSTEST - GOST RUSSIA
• EPAL AUSTRIA
• BIFMA USA
Catas product certification
Continual control of the certificated product quality
Application for CQA
Documents analysis and inspections on site
Tests on samples
Product certification issue
Internal Inspections External Inspections
Product Certification steps - CQAProduct Certification steps - CQA
Catas-WKI Certification Coating sistems for exterior wood
Fraunhofer Institute for Wood Research, Wilhelm-Kauditz Institute - WKI - and Catas SpA has defined a common quality product certification concerning the efficiency of the coating systems for exterior wood.
The mark Catas-WKI Premium testifies the excellence of products and it is valid in Italy and Germany.
The coating systems for exterior wood can be certified either by Catas or by WKI.
This product certification will help consumers to decide which product to buy because the mark is guaranteed by the two reliable and independent Institutes.
The certification is founded on the ENV 972 series and on other international standards.
Certificated ProductsCertificated Products
• Formaldehyde (47)Formaldehyde (47)
• Coating systems for exterior wood - CSEW(10)Coating systems for exterior wood - CSEW(10)
• CSEW WKI-CATAS Premium (3)CSEW WKI-CATAS Premium (3)
• Beds & Mattresses (6)Beds & Mattresses (6)
• Wood glulam profiles for window framesWood glulam profiles for window frames (4) (4)
• Indoor coating systems (1)Indoor coating systems (1)
• Furniture surfaces (1)Furniture surfaces (1)
• Easier penetration wooden screwsEasier penetration wooden screws (1) (1)
New proposals CQANew proposals CQA
Office chairsOffice chairs
Furniture frontalsFurniture frontals
Handles “press – open”Handles “press – open”
Furniture locksFurniture locks
Cup hinges
Wooden floorsWooden floors
………………....
Research
ResearchResearch
• VOC Chair district project (ENEA)• VOC Pordenone furniture district (ARPA-UNIV.UD)• Biofiltration project (UNIV.UD)• COST Action (Woodcoatings foundation for the
future)• FUNFACE Project• Leonardo Project (Furniture Technical Schools)• Knowood Project (Furniture Technical Schools)
ResearchResearch Degree thesis 2003-2004Degree thesis 2003-2004
• Plastic chairs - characteristics and durability• Hot melt adhesives• Economical valuation of chairs coating processes
with a low impact on the environment• Catas and firm globalization• Catas services costs valuation• Characteristics of coating films
1. Collaboration with Area Science Park of Triest concerning the Innovation Network project as Wood & Furniture Competence Centre
2. Beginning of some new projects in the wood & furniture sector
3. Services to the firms: technological audit, patent information, innovation assistance, assistance on development of research projects, etc.
job
Furniture Commission v president - -
Wood Commission member - -
Wood Commission, SC panels member - -
Furniture Commission member CEN TC 207 Furniture delegate
Furniture Commission, SC testing president CEN TC 207 tutti i WG ed SC delegate
Furniture Commission, all SC member CEN TC 193 Wood Adhesives delegate
Biomedical Commission, SC technical aids for disable persons
member - -
Wood coatings commission president CEN TC 112 Wooden Pannels, WG 5 - Formaldehyde delegate
Wood furniture coatings commission memberCEN TC 139 Paints and Varnishes, WG 2 Vernici per legno per esterni
delegate
Wood Commission, SC panels member -
Furniture Commission, SC fire reaction member - -
Fire behaviour commission, SC fire reaction member - -
Fire behaviour commission, SC protective coverings member - -
job
Internal transports Commission, SC castors and wheels
memberCEN TC 207 WG5/TG1 Chair and tables for educational Institutions
delegate
- ISO 136 Furniture delegate
testing surfaces section Colorimetry Commission member CEN TC 139/207 Paints and Varnishes, WG 7 Prove delegate
Furniture Commission, SC hardware member
Furniture Commission, SC contract member
Furniture Commission, SC mattrasses member
Furniture Commission, SC testing member
Biomedical Commission, SC technical aids for disable persons
member
Wood adhesives commission member - -
Wood Commission, SC panels member - -
head chemical analytical section
Enviroment Commission, WG4 Air quality member - -
Colorimetry Commission member - -
Wood coatings commission member - -
Wood furniture coatings commission member - -
Furniture Commission, SC bath member
Furniture Commission, SC upholstery member
STANDARDIZATION
dott. Franco Bulian
- -
dott. ing. Angelo Speranza
dott. Andrea Giavon
dott. ing. Franco Prete
tima Alberto Gelosa
tima Paolo Balutto
Furniture testing section Brianza branch
tima Giorgio Crotti
mechanical testing dpt
UNI/UNICHIM
tima Ezio Facchini
dott. Roberto Battaglia
p.ch. Barbara Casartelli testing surfaces section brianza branch
tima Claudio Caon
head furniture testing section
CEN/ISO
Head Brianza branch - -
vice director, head furniture testing dpt
head chemical dpt
head fire dpt
Catas personell
Catas personell UNI/UNICHIM CEN/ISO
CEO
Publications
Legno e Umidità (Wood & Moisture)
Incollare il legno - Gluing wood
Verniciare il legno (Coating wood)
La reazione al fuoco (Fire reaction)
Distretto della sedia: gli aspetti ambientali e le migliori tecnologie (The Italian
chair district: enviromental aspects and best technologies)
Distretto del mobile: gli aspetti ambientali e le migliori tecnologie (The regional
furniture district: enviromental aspects and best technologies)
Notizie CATAS (Catas News, quarterly)